Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ultramafic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Experimental evidence for chemo-mechanical coupling during carbon mineralization in ultramafic rocks

It is known that storing carbon dioxide in the subsurface as carbonate minerals has the benefit of long-term stability and immobility. Ultramafic rock formations have been suggested as a potential reservoir for this type of storage due to the availability of cations to react with dissolved carbon dioxide and the fast reaction rates associated with minerals common in ultramafic formations; however, the rapid reactions have the potential to couple with the mechanical and hydraulic behavior of the rocks and little is known about the extent and mechanisms of this coupling. In this study, we argue that the dissolution of primary minerals and the precipitation of secondary minerals along pre-existing fractures in samples lead to reductions in both the apparent Young's modulus and shear strength of aggregates, accompanied by reduction in permeability. Hydrostatic and triaxial deformation experiments were run on dunite samples saturated with de-ionized water and carbon dioxide-rich solutions while stress, strain, permeability and pore fluid chemistry were monitored. Sample microstructures were examined after reaction and deformation using scanning electron microscopy (SEM). The results show that channelized dissolution and carbonate mineral precipitation in the samples saturated with carbon dioxide-rich solutions modify the structure of grain boundaries, leading to the observed reductions in stiffness, strength and permeability. A geochemical model was run to help interpret fluid chemical data, and we find that the apparent reaction rates in our experiments are faster than rates calculated from powder reactors, suggesting mechanically enhanced reaction rates. In conclusion, we find that chemo-mechanical coupling during carbon mineralization in dunites leads to substantial modification of mechanical and hydraulic behavior that needs to be accounted for in future modeling efforts of in situ carbon mineralization projects.

58 GEOSCIENCES↗

Experimental Constraints on the Origin of Lunar High-Ti Ultramafic Glasses

Phase equilibria and dissolution rate experiments are used to develop a petrogenetic model for the high-Ti lunar ultramafic glasses. Near-liquidus phase relations of the Apollo 14 black glass, the most Ti-rich lunar ultramafic glass, are determined to 2.2-GPa. The liquidus is saturated with Cr-spinel at 1-atm, olivine between approximately 0.5- and 1.5-GPa, and low-Ca pyroxene + Cr-spinel above 1.5-GPa. Ilmenite does not crystallize near the liquidus and implies that high-Ti ultramafic glasses are not produced by melting of an ilmenite-saturated source. We infer that high-Ti ultramafic magmas are derived from low-Ti ultramafic parent magmas by assimilation of ilmenite +/- clinopyroxene +/- urKREEP +/- pigeonite in the shallow lunar interior. Heat is provided by adiabatic ascent of the low-Ti ultramafic primary magmas from the deeper lunar interior and crystallization of olivine during assimilation. The assimilation reaction is modeled by mass balance and requires that ilmenite and high-Ca pyroxene are assimilated in a approximately 3:1 ratio, a much higher ratio than the proportion in which these minerals are thought to exist in the lunar interior. In an effort to understand the kinetic controls on this reaction, the dissolution of ilmenite is examined experimentally in both low- and high-Ti lunar magmas. We find that ilmenite dissolves incongruently to Cr-spinel and a high-Ti melt. The dissolution reaction proceeds by a diffusion-controlled mechanism. An assimilation model for the origin of high-Ti melts is developed that leaves the magma ocean cumulates in their initial stratigraphic positions and obviates source hybridization models that require lunar overturn.

Wagner, T. P.↗

Two contrasting metamorphosed ultramafic-mafic complexes from greenstone belts, the northern Kaapvaal Craton and their significance in Archaen tectonics

The character of Archaean ultramafic-mafic complexes can, given their prominance in greenstone belts, provide critical clues to help deduce the tectonic setting of these belts. Here are described two contrasting, metamorphosed, ultramafic-mafic complexes, the first a partially serpentinized dunitic body with associated chromite from Lemoenfontein, one of several peridotitic bodies occurring as discrete lenses and pods in granulite facies gneisses of the northern Kaapvaal craton. The second, the Rooiwater complex is a major layered igneous body, now metamorphosed in the amphibolite facies, but without pervasive deformation, which crops out in the northern Murchison greenstone belt. The Lemoenfontein chromites and associated ultramafic rocks are lithologically and chemically similar to their Phanerozoic equivalents of ophiolitic origin, interpreted as obducted oceanic crust. The Lemoenfontein complex is a remnant of Archaean oceanic material. In contrast, the Rooiwater complex is, despite the lack of exposed intrusive contacts, similar to layered igneous complexes such as Ushushwana or Bushveld. These complexes are intrusive in continental environments. It is concluded that contrasting ultramafic-mafic complexes represent a heterogeneity in greenstone belts with either oceanic or continental environments involved.

Smit, C. A.↗

Carbon Mineralization in Fractured Mafic and Ultramafic Rocks: A Review

Mineral carbon storage in mafic and ultramafic rock masses has the potential to be an effective and permanent mechanism to reduce anthropogenic CO 2 . Several successful pilot-scale projects have been carried out in basaltic rock (e.g., CarbFix, Wallula), demonstrating the potential for rapid CO 2 sequestration. However, these tests have been limited to the injection of small quantities of CO 2 . Thus, the longevity and feasibility of long-term, large-scale mineralization operations to store the levels of CO 2 needed to address the present climate crisis is unknown. Moreover, CO 2 mineralization in ultramafic rocks, which tend to be more reactive but less permeable, has not yet been quantified. In these systems, fractures are expected to play a crucial role in the flow and reaction of CO 2 within the rock mass and will influence the CO 2 storage potential of the system. Therefore, consideration of fractures is imperative to the prediction of CO 2 mineralization at a specific storage site. In this review, we highlight key takeaways, successes, and shortcomings of CO 2 mineralization pilot tests that have been completed and are currently underway. Laboratory experiments, directed toward understanding the complex geochemical and geomechanical reactions that occur during CO 2 mineralization in fractures, are also discussed. Experimental studies and their applicability to field sites are limited in time and scale. Many modeling techniques can be applied to bridge these limitations. We highlight current modeling advances and their potential applications for predicting CO 2 mineralization in mafic and ultramafic rocks.

25 ENERGY STORAGE↗

Lunar ultramafic glasses, chondrules and rocks.

Analysis of all samples returned by lunar missions before Apollo 15 has shown green glasses of ultramafic composition in soil and microbreccia samples. Ultramafic glasses in Apollos 11 and 14 and Luna 16 samples are rare and similar to each other in composition but different from any of the rocks collected at these sites. Details of work regarding Apollo 15 ultramafic green glasses are discussed together with questions of the origin of all green glasses.

Bunch, T. E.↗

Geobotanical discrimination of ultramafic parent materials An evaluation of remote sensing techniques

Color and color infrared aerial photography and imagery acquired from a Daedalus DEI-1260 multispectral airborne scanner were employed in an investigation to discriminate ultramafic rock types in a test site in southwest Oregon. An analysis of the relationships between vegetation characteristics and parent materials was performed using a vegetation classification and map developed for the project, lithologic information derived from published geologic maps of the region, and terrain information gathered in the field. Several analytical methods, including visual image analysis, band ratioing, principal components analysis, and contrast enhancement and subsequent color composite generation were used in the investigation. There was a close correspondence between vegetation types and major rock types. These were readily discriminated by the remote sensing techniques. It was found that ultramafic rock types were separable from non-ultramafic rock types and serpentine was distinguishable from non-serpentinized peridotite. Further investigations involving spectroradiometric and digital classification techniques are being performed to further identify rock types and to discriminate chromium and nickel-bearing rock types.

Mouat, D. A.↗

Enigmatic Nodule-Bearing Rocks in the Mafic to Ultramafic Diana Mills Pluton, Piedmont Province, Virginia

The Silurian Diana Mills pluton is a metamorphosed mafic-ultramafic body in the Piedmont Province of Virginia. Major rock types in the pluton include metadiorite and chlorite‐amphibole rock, with lesser amounts of hornblendite. However, the most visually striking rocks, found at 4 locations, consist of tan‐weathering nodules in a dark green matrix. The purpose of this study was to investigate the origin of these nodular rocks. All rocks show evidence of greenschistfacies metamorphism, but relict igneous textures are preserved locally. Apart from the nodules, Ca‐amphibole is ubiquitous in all rock types. Nodules are dominated by serpentine or talc (+magnetite +/- chromite), and many show a thin (less than or equal to 5 mm) radially oriented shell of serpentine against adjacent matrix. The nodules are ultramafic (Mg# approx. 80-90, up to7,563 ppm Cr, up to 2,038 ppm Ni), and their normative mineralogy is dominated by olivine and orthopyroxene. Thus, they represent metamorphosed harzburgites and pyroxenites. Matrix minerals are dominantly amphibole + chlorite, along with variable amounts of talc + magnetite. Some matrix samples are chlorite‐rich, probably reflecting metasomatic reaction with nodules (i.e., they are small‐scale ''blackwalls''). Matrix samples are also ultramafic (high Mg#, Cr, and Ni). The matrix of the nodule‐bearing outcrops is essentially the same as other chlorite‐amphibole rocks elsewhere in the pluton. We consider these rocks to represent emplacement of an original hornblende peridotite crystal mush (a mixture of crystals and hydrous melt), which locally carried harzburgitic nodules. The nodules most likely represent the earliest‐formed cumulates from the Diana Mills parent magma.

Owens, Brent E.↗

High-resolution TEM study of jimthompsonite, chesterite, and chain-width disorder in Archean ultramafic rocks from Isua, West Greenland

This paper reported transmission electron microscopy observations of alteration products of an ultramafic rock from Isua, Greenland. Ca-Mg-carbonate mineral of dolomite is considered as a stable sink for carbon dioxide injected into potential ultramafic rocks. The structural relationship between dolomite and its host Ca-Mg-silicate minerals was observed. Ca-Mg-silicate minerals of pyroxene and amphibole may provide Ca-Mg source and nucleation site.

58 GEOSCIENCES↗

Clumped-isotope thermometry of magnesium carbonates in ultramafic rocks

Here, magnesium carbonate minerals produced by reaction of H 2 O–CO 2 with ultramafic rocks occur in a wide range of paragenetic and tectonic settings and can thus provide insights into a variety of geologic processes, including deposition of ore-grade, massive-vein cryptocrystalline magnesite; formation of hydrous magnesium carbonates in weathering environments; and metamorphic carbonate alteration of ultramafic rocks. However, the application of traditional geochemical and isotopic methods to infer temperatures of mineralization, the nature of mineralizing fluids, and the mechanisms controlling the transformation of dissolved CO 2 into magnesium carbonates in these settings is difficult because the fluids are usually not preserved.

58 GEOSCIENCES↗

An integrated experimental–modeling approach to identify key processes for carbon mineralization in fractured mafic and ultramafic rocks

Abstract Controlling atmospheric warming requires immediate reduction of carbon dioxide (CO2) emissions, as well as the active removal and sequestration of CO2 from current point sources. One promising proposed strategy to reduce atmospheric CO2 levels is geologic carbon sequestration (GCS), where CO2 is injected into the subsurface and reacts with the formation to precipitate carbonate minerals. Rapid mineralization has recently been reported for field tests in mafic and ultramafic rocks. However, unlike saline aquifers and depleted oil and gas reservoirs historically considered for GCS, these formations can have extremely low porosities and permeabilities, limiting storage volumes and reactive mineral surfaces to the preexisting fracture network. As a result, coupling between geochemical interactions and the fracture network evolution is a critical component of long-term, sustainable carbon storage. In this paper, we summarize recent advances in integrating experimental and modeling approaches to determine the first-order processes for carbon mineralization in a fractured mafic/ultramafic rock system. We observe the critical role of fracture aperture, flow, and surface characteristics in controlling the quantity, identity, and morphology of secondary precipitates and present where the influence of these factors can be reflected in newly developed thermo-hydro-mechanical–chemical models. Our findings provide a roadmap for future work on carbon mineralization, as we present the most important system components and key challenges that we are overcoming to enable GCS in mafic and ultramafic rocks.

58 GEOSCIENCES↗

Ultramafic parent magmas for mare basalts?

Solidification products of basaltic magmas (fine grained basalts and ultramafic glasses) at the Apollo 15 site were examined. Consideration of simple MgO-6IO2-Al2O3 systematics plus results of calculations of fractional crystallization was reviewed. Suggestions are presented to account for the lack of correlation between the ultramafic glasses and basalts.

Longhi, J.↗

Spatial greenstone-gneiss relationships: Evidence from mafic-ultramafic xenolith distribution patterns

The distribution patterns of mafic-ultramafic xenoliths within Archaean orthogneiss terrain furnish an essential key for the elucidation of granite-greenstone relations. Most greenstone belts constitute mega-xenoliths rather than primary basin structures. Transition along strike and across strike between stratigraphically low greenstone sequences and xenolith chains demonstrate their contemporaneity. These terrains represent least deformed cratonic islands within an otherwise penetratively foliated deformed gneiss-greenstone crust. Whereas early greenstone sequences are invariably intruded by tonalitic/trondhjemitic/granodioritic gneisses, stratigraphically higher successions may locally overlap older gneiss terrains and their entrained xenoliths unconformably. The contiguity of xenolith patterns suggests their derivation as relics of regional mafic-ultramafic volcanic crustal units and places limits on horizontal movements between individual crustal blocks.

Glikson, A. Y.↗

Highly evolved and ultramafic lithologies from Apollo 14 soils

Eighteen 2-4-mm fragments were extracted from several Apollo 14 soil samples and examined by instrumental neutron activation analysis, and were studied petrographically. Results indicate that these rock fragments span almost the whole range of magma evolution, from ultramafic cumulates to extreme differentiates that were apparently produced by silicate liquid immiscibility. Three of the fragments are dimict granitic breccias composed of granitic clasts intruded by a ferropyroxenitic glass, and may represent an immmiscible melt pair that has been remixed by impact. Two fragments are ultramafic rocks, including a dunite with very low REE abundances and a peridotite/impact melt breccia.

Morris, R. W.↗

Ultramafic Terranes and Associated Springs as Analogs for Mars and Early Earth

Putative extinct or extant Martian organisms, like their terrestrial counterparts, must adopt metabolic strategies based on the environments in which they live. In order for organisms to derive metabolic energy from the natural environment (Martian or terrestrial), a state of thermodynamic disequilibrium must exist. The most widespread environment of chemical disequilibrium on present-day Earth results from the interaction of mafic rocks of the ocean crust with liquid water. Such environments were even more pervasive and important on the Archean Earth due to increased geothermal heat flow and the absence of widespread continental crust formation. The composition of the lower crust and upper mantle of the Earth is essentially the-same as that of Mars, and the early histories of these two planets are similar. It follows that a knowledge of the mineralogy, water-rock chemistry and microbial ecology of Earth's oceanic crust could be of great value in devising a search strategy for evidence of past or present life on Mars. In some tectonic regimes, cross-sections of lower oceanic crust and upper mantle are exposed on land as so-called "ophiolite suites." Such is the case in the state of California (USA) as a result of its location adjacent to active plate margins. These mafic and ultramafic rocks contain numerous springs that offer an easily accessible field laboratory for studying water/rock interactions and the microbial communities that are supported by the resulting geochemical energy. A preliminary screen of Archaean biodiversity was conducted in a cold spring located in a presently serpentinizing ultramafic terrane. PCR and phylogenetic analysis of partial 16s rRNA, sequences were performed on water and sediment samples. Archaea of recent phylogenetic origin were detected with sequences nearly identical to those of organisms living in ultra-high pH lakes of Africa.

Blake, David↗

Olivine Dissolution and Formation of Secondary phases in Ultramafic Soils

Introduction: Olivine has been proposed as an indicator for the duration of water-rock interaction within Martian rocks and sediments [1-3]. The use of olivine as a mineralogical indicator for past aqueous alteration on Mars requires interpretation of a complex combination of factors including pH, temperature, and composition [5,6]. Here, we examine the persistence of natural olivine within terrestrial ultramafic soils (Fe/Mg-rich, Al-poor) developing under different climatic conditions and the incipient dissolution of emplaced forsterite (Fo) and fayalite (Fa) surfaces to investigate environmental effects on incipient olivine dissolution, olivine persistence in soils, and formation of secondary phases. Methods: Field Sites. We examined olivine weathering and secondary material formation in ultramafic soils at 6 sites in the Klamath Mountains (KM) of northern California with a mean annual temperature of ~12.8℃ and precipitation of ~55.7-95.4 cm/year [7], and soil pH of ~6.5-7.3; 4 sites in the Tablelands (TB) of Newfoundland, Canada with a mean annual temperature of <3.9℃ and precipitation of ~120.0 cm/year [8], and soil pH of ~7.7; and at 3 sites at Pickhandle Gulch (PG), Nevada with a mean annual temperature of ~14.4℃ and precipitation of ~14.1 cm/year [7], and soil pH of ~8.5. Sampling sites span an age range of ~12.1-50+ kya in the Klamath Mountains [9,10] and ~13-30 kya in the Tablelands [11]. Pickhandle Gulch sites are undated. Parent Material and Soil Analyses. Polished thin sections of bulk soil prepared by Wagner Petrographic, Inc were carbon-coated and analyzed on a JEOL 2100 SEM in back-scattered electron mode in the EMIL lab at UNLV and at the 13-ID-E synchrotron beamline at Argonne National Laboratory using µXRF, µXRD, and XAS. Soil and parent material samples were powdered in a Fritsch pulverisette and analyzed by XRD and soil by VNIR. Soil preparation is further described in [12]. Disk Preparation, Burial, and Collection. Fo disks were cut from a column prepared via hot-pressing and Fa disks by sintering synthetic fayalite powder, see [13] for detail. Disks were polished to a 0.25-micron level with diamond grit. Disks were buried in 3 KM soils, 4 TB soils, and 3 PG soils, collected after exactly 365 days, and washed gently with 100% reagent grade ethanol to remove potential adhered soil material. Weathered disks and soil samples were stored in a -20℃ freezer until analysis. Unaltered control disks prepared identically to the buried disks were stored at -20℃ for the duration of the experiment. Disk Analyses. One Fo and Fa disk from each climate zone was analyzed on a variable pressure Zeiss Supra 40VP SEM at Northern Arizona University. A separate Fo and Fa disk from each climate zone was analyzed by XPS using a Physical Electronics VersaProbe II at the Penn State Univ. Materials Characterization Lab after a Na-dodecyl sulfate wash and ozonation to remove carbon contamination as in [14]. VNIR measurements were conducted at Johnson Space Center using an ASD FieldSpec3 under ambient lab conditions on a separate Fo and Fa disk from each climate zone. One separate Fo and Fa control sample was analyzed for each technique for comparison with weathered samples. XPS uncertainty was determined from 5 repeat measurements on controls. Results: Bedrock and Soil Results Olivine is present in the parent material in the KM and TB. Olivine is found in ~12.1 ka KM soils but is absent from all older soils, while persisting into the oldest (>20 ka) TB soil (Figure 1). In both locations, olivine is found as cores surrounded by a serpentine rind (Figure 2). VNIR spectra from the analyzed soils possess strong OH-associated spectral features at ~2.33 µm indicating the presence of Mg-rich phyllosilicates as well as ferric-oxide features at ~0.92 µm in the KM (Figure 3). Primary crystalline silicate grains mostly incorporate Fe2+, while poorly crystalline weathering rinds are best fit by ferric oxide XAS standards (Figure 4). µXRF also shows that Fe and Ni concentrate in weathering rinds and Cr remains within interior silicate grains (Figure 4). Buried Sample Results All Fo surfaces exhibited formation of dissolution features including shallow pitting not observed on controls. Dissolution features were most visually widespread on the KM disk (Figure 5). Leaching of Mg from KM and TB Fo disks was evident from <1.6 Mg/Si ratios measured by XPS (Figure 6). Fe-rich precipitates in SEM (Figure 5) and Fe presence in XPS scans (Figure 6) indicate Fe deposition onto KM and TB Fo disk surfaces. The appearance of a spectral feature at 0.55 µm in the VNIR spectra from the TB Fo suggests this Fe is ferric (Figure 7). The PG Fo appears least altered, with minimal formation of dissolution features in SEM (Figure 5), a Mg/Si ratio inconsistent with leaching (~2) (Figure 6), and VNIR spectra almost identical to the control sample. Analysis of Fa surfaces is ongoing. The higher temperatures and more acidic pH in the KM soils likely drive the faster dissolution of the Fo disks described above. While the TB soils experience greater precipitation than in the KM, the cooler temperatures and more basic soil pH facilitate observable but more limited alteration. The dry climate and basic soil pH at PG lead to minimal dissolution of the PG disk surfaces.

A D Feldman↗

Subsurface mafic and ultramafic rock mapping and analysis for carbon mineralization in the United States (SubMAP-CO 2 )

Achieving durable, gigaton-scale carbon dioxide (CO₂) removal will require the development of storage strategies that are both permanent and scalable. Among the available options, carbon mineralization in mafic and ultramafic rocks offers a uniquely robust pathway for long-term CO₂ sequestration, converting CO₂ into thermodynamically stable carbonate minerals. While surface exposures of these lithologies have been extensively studied, particularly in ophiolitic and volcanic settings, the potential for carbon mineralization in the subsurface remains comparatively underexplored at national scale. This gap limits the ability to assess storage capacity, accessibility, and deployment pathways for mineralization-based carbon management in the United States.

08 HYDROGEN↗

Chelation-Driven Chemistry Controls Dissolution Pathways for Facile Critical Mineral Recovery from Ultramafic Resources

The efficient recovery of critical minerals, such as nickel (Ni) and manganese (Mn) from the subsurface is of vital importance, given their role in modern technologies ranging from batteries to advanced alloys. This study explores an approach that employs chelation to enhance critical mineral recovery from ultramafic rocks using chelating ligands under ambient pressures and systematically evaluates the extraction process for the first time. Experimental results demonstrate the superior performance of EDTA and PrDTA in achieving high extraction efficiencies for both Ni and Mn. To further highlight the ability for optimization, the fluid exchange and variation of fluid-to-rock ratio experiments were conducted, revealing tunable controls for engineering recovery. We show that under optimized conditions, a Ni extraction efficiency of ?82% and a Mn extraction efficiency of ~60% is achieved at ambient pressures, which is equivalent to over 23 times the current global Ni production, and 2 million metric tonnes (MMT) greater than the current global Mn production. From both in-situ and ex-situ mining perspectives, the results highlight the potential of chelation to advance sustainable mineral processing. Overall, this work highlights the environmental benefits of innovative ligand-assisted recovery methods, addressing the critical need for the efficient utilization of olivine resources.

Krishnan, Keerthana↗