Search NASA⌕ Search

SEARCH · Search NASA

Results for “VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reassessment of Birch's Law on hcp‐Fe From Ultrasonic Sound Velocity Measurement and Implications on the Velocity Profiles of Earth's Inner Core

Here, we performed in situ X-ray diffraction and ultrasonic sound velocity measurements on hcp-Fe up to 15 GPa, 873 K in a multi-anvil apparatus. The elastic moduli and their pressure and temperature derivatives were determined by fitting the velocity and density data to the third-order finite strain equations, yielding K S0 = 169.0(57) GPa, K$^{′}_{S0}$ = 5.4(6), (∂K S /∂T) P = −0.031(3) GPa/K, G 0 = 104.5(27) GPa, G$^{′}_{0}$ = 1.7(2), (∂G/∂T) P = −0.060(2) GPa/K. Within the experimental P-T range, we find significant temperature effect on the density-velocity (ρ − V P or S ) relations and caution the use of the temperature-independent Birch's law for extrapolation to core conditions. Furthermore, temperature-induced velocity decrease is more significant in V S than in V P , offering a possible explanation for the high Poisson's ratio in the core. Extrapolations based on our results together with previous experimental data suggest that V P of hcp-Fe aligns with PREM at Earth's core conditions, while Vs and density are approximately 10% and 2.7% higher than PREM, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Pressure-induced velocity softening in natural orthopyroxene at mantle temperature

In this study, we have measured the compressional and shear wave velocities of (Mg 1.77 Fe 0.22 Ca 0.01 )Si 2 O 6 natural orthopyroxene up to 13.5 GPa and 873 K using ultrasonic interferometry in conjunction with in situ synchrotron X-ray diffraction and imaging techniques. Previous acoustic experiments on orthoenstatite (OEn) MgSiO 3 indicated that both compressional and shear velocities (V P and V S ) of OEn undergo continuous velocity softening above 9 GPa at room temperature, which has been attributed to the phase transition from OEn to the metastable, high-pressure clinoenstatite HPCEn2. For the first time, our results suggest that pressure-induced velocity softening can occur in natural orthopyroxene at high-temperature conditions relevant to the Earth's cold subduction zones. As a result, estimates of the impedance and velocity contrasts between orthopyroxene (Opx) and high-pressure clinopyroxene (HPCpx) have been calculated, and the possibility of this phase transformation being a plausible candidate for seismic X-discontinuities at depth around 250–350 km is re-evaluated.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Spiral Galaxies Flat Rotational Velocity Curve Explained by the Constant Group Velocity of a Nonlinear Density Wave

The rotation velocity curves of stars in galaxies, the motions of pairs of galaxies, and the behavior of galaxies in clusters and super-clusters all indicate that there is a lack of mass on different scales in the universe. In this paper, we derive the expression for rotational velocity using the nonlinear density wave theory considering only stellar components and we show that such theory can support the observed flat rotational velocity curve due to the main property of the soliton wave, which is a constant group velocity of the wave. The surface mass density (SMD) function, used to derive gravitational potential gradient and rotational velocity, is not assumed but rather derived as a solution of the nonlinear Srödinger equation, on the contrary to the widely used, in the literature, exponential disk approximation. Three parameters relevant to the curve shape are the intensities of equilibrium SMD, the amplitude of the wave, and total angular velocity or differential rotation, equivalently. Since the shape of the rotational velocity is highly sensitive to the mentioned parameters, this theory eventually provides a method for a very accurate estimation of galaxy mass and angular velocity as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Temporal changes of seismic velocities in the San Jacinto Fault zone associated with the 2016 M w 5.2 Borrego Springs earthquake

We study temporal changes of seismic velocities associated with the 10 June 2016 Mw 5.2 Borrego Springs earthquake in the San Jacinto fault zone, using nine component Green's function estimates reconstructed from daily cross correlations of ambient noise. The analysed data are recorded by stations in two dense linear arrays, at Dry Wash (DW) and Jackass Flat (JF), crossing the fault surface trace ~3 km northwest and southeast of the event epicentre. The two arrays have 9 and 12 stations each with instrument spacing of 25–100 m. Relative velocity changes (δv/v) are estimated from arrival time changes in the daily correlation coda waveforms compared to a reference stack. The obtained array-average δv/v time-series exhibit changes associated with the Borrego Springs event, superposed with seasonal variations. The earthquake-related changes are characterized by a rapid coseismic velocity drop followed by a gradual recovery. This is consistently observed at both arrays using time- and frequency-domain δv/v analyses with data from different components in various frequency bands. Larger changes at lower frequencies imply that the variations are not limited to the near surface material. A decreasing coseismic velocity reduction with coda wave lapse time indicates larger coseismic structural perturbations in the fault zone and near-fault environment compared to the surrounding rock. Observed larger changes at the DW array compared to the JF array possibly reflect the northwestward rupture directivity of the Borrego Springs earthquake.

Geochemistry & Geophysics↗
DOE OSTI2022

Velocity Profiling of a Gas–Solid Fluidized Bed Using Electrical Capacitance Volume Tomography

In this study, a method of producing velocity profile maps from electrical capacitance volume tomography (ECVT) measurements by reconstructing displacement from measured changes in capacitance is developed and applied to fluidized bed systems. The mapping of the reconstruction leverages the gradient of the sensitivity distribution of the ECVT sensor to circumvent the need for image cross correlation techniques. Experimental data of both bubbling and slugging fluidized beds are collected in a cold flow model. Adaptation of the technique is discussed in detail, and velocity profiles are obtained for a range of gas flow rates. The produced velocity maps are compared against the established methods of cross correlation and against empirical correlations from the literature and are found to agree well in tracking slug and bubble velocity. The exception is when the tracked object is large relative to the ECVT sensor dimensions, a scenario that can be avoided through proper sensor design. The quantities of average velocity, momentum, and solid and gas volume fraction are derived from the image and velocity profiles. The results demonstrate and extend the power of ECVT as a measurement tool for the study and monitoring of gas–solid fluidized beds by providing a computationally cheaper alternative to 3-D cross correlation for deriving velocity profiles.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Sound velocities of iron-nickel (Fe90Ni10) alloy up to 8 GPa and 773 K: The effect of nickel on the elastic properties of bcc-iron at high P-T

Sound velocities of iron and iron-based alloys at high pressure and high temperature are crucial for understanding the composition and structure of Earth’s and other telluric planetary cores. In this study, we performed ultrasonic interferometric measurements of both compressional (ν P ) and shear (ν S ) velocities on a polycrystalline body-centered-cubic (bcc)-Fe 90 Ni 10 up to 8 GPa and 773 K. The elastic moduli and their pressure and temperature derivatives are derived from least-square fits to third-order finite strain equations, yielding K S0 = 154.2(8) GPa, G 0 = 73.2(2) GPa, K' S0 = 4.6(2), G' 0 = 1.5(1), ∂K S /∂T = –0.028(1) GPa/K, and ∂G/∂T = –0.023(1) GPa/K. Furthermore, a comparison with literature data on bcc-Fe suggests that nickel not only decreases both P and S wave velocities but also weakens the temperature effects on the elastic moduli of Fe-Ni alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Efficient 3-D velocity model building using joint inline and crossline plane-wave wave-equation migration velocity analyses

SUMMARY Wave-equation migration velocity analysis (WEMVA) is an image-domain inversion method for velocity model building. Automatic plane-wave WEMVA (PWEMVA) calculates the moveouts of plane-wave common-image gathers (CIGs) by searching a best-fitting parabola with semblance analysis and backprojects residual CIG moveouts into wavefield wave paths with a reflection tomographic kernel. However, 3-D PWEMVA is very computationally expensive because 3-D reflection tomographic inversion requires at least five 3-D reverse-time migrations per iteration and stores two types of source wavefields at model boundaries. We develop a joint inline and crossline PWEMVA method for efficient 3-D velocity model building. We alternatively implement the inline and crossline PWEMVAs with a constraint for each other, in which we iteratively construct the 3-D velocity model update through 1-D spline interpolation of 2-D gradients. The inline and crossline joint inversion is practical since PWEMVA only inverts for low-wavenumber velocity perturbations along wave paths, and the method can take less than 1 per cent of the computational cost of full 3-D PWEMVA. To construct unaliased plane waves for our joint inline and crossline PWEMVA, we develop a 3-D data interpolation method in the frequency–wavenumber (FK) domain to recover regularly and randomly missing traces. The method minimizes the misfit on sufficiently localized data subsets with iterative optimal step lengths and a gradient preconditioner that iteratively selects dominant dips along different azimuths. In numerical experiments, we use a 3-D synthetic seismic data set and a land 3-D field seismic data set acquired at the Farnsworth CO2-EOR (enhanced oil recovery) field to demonstrate the efficacy of our velocity model building and data interpolation methods.

Liu, Xuejian↗
DOE OSTI2022

Mutually promoting or constraining? Disentangling the superimposed effect of velocity and illuminance on fish motion in low-velocity flows with a novel metric

Global climate change, species invasion, and human activities such as the construction of hydraulic facilities are contributing to the worldwide degradation of fish stocks. As a pivotal environmental factor that affects fish migration and population distribution, low-velocity flow has not drawn enough attention despite its extensive presence in various ecoregions. Herein, to understand the behavioural profiles of fish in low-velocity flow, we examined the motility and swimming performance of two representative cyprinids, grass carp (GC, Ctenopharyngodon idella) and silver carp (SC, Hypophthalmichthys molitrix), under the combined effect of different flow velocities and illuminance ranges. The two species were exposed to two flow velocities (0.15 and 0.25 m/s) and three illuminance ranges (100.0 – 0.9 lx, 300.0 – 2.5 lx, and 700.0 – 4.9 lx). A novel behavioural metric, composed of light preference, cruising swimming speed, rheotaxis index (RI), swimming stability (SS), and the probability of moving forwards/backwards over a certain distance (PM f -0.1 and PM b -0.1), was developed to depict the motion strategy of fish fully. By investigating the individual distribution of the fish in light gradient, we confirmed the scototaxis of GC and found the oscillating light preference in SC that changed from 84.4 – 10.2 lx to 6.0 – 2.1 lx and disappeared with increasing illuminance. At the given velocities, the RI and SS increased in both species with a faster flow, and SC was more forward-prone and stable than GC. Despite its fluctuating light preference, the higher illuminances heightened the RI and SS in SC; while in GC, higher illuminances inhibited the SS and had no impact on the RI. The results of PM f -0.1 and PM b -0.1 indicated that a higher flow velocity could facilitate temporary upstream swimming in both species, while illuminance could promote the same effect in SC only. Finally, our study proposed possible moving manoeuvres in fine-scale spatio-temporal scenarios such as attraction flow and untraditional passages and provides valuable insights into fish community dynamics, laying the groundwork for alleviating the threat from invasive species and for future fish population recovery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Grain boundary velocity and curvature are not correlated in Ni polycrystals

Grain boundary velocity has been believed to be correlated to curvature, and this is an important relationship for modeling how polycrystalline materials coarsen during annealing. We determined the velocities and curvatures of approximately 52,000 grain boundaries in a nickel polycrystal using three-dimensional orientation maps measured by high-energy diffraction microscopy before and after annealing at 800°C. Unexpectedly, the grain boundary velocities and curvatures were uncorrelated. Instead, we found strong correlations between the boundary velocity and the five macroscopic parameters that specify grain boundary crystallography. The sensitivity of the velocity to grain boundary crystallography might be the result of defect-mediated grain boundary migration or the anisotropy of the grain boundary energy. The absence of a correlation between velocity and curvature likely results from the constraints imposed by the grain boundary network and implies the need for a new model for grain boundary migration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Strong effect of liquid Fe–S on elastic wave velocity of olivine aggregate: Implication for the low velocity anomaly at the base of the lunar mantle

The origin of the seismic low velocity zone (LVZ) observed at the base of the lunar mantle is important for understanding the nature of the lunar mantle. Liquid Fe–S is considered as a possible candidate of the cause of the LVZ. However, effect of liquid Fe–S on elastic wave velocity of mantle rock has been considered to be minor, according to theoretical estimation based on the high dihedral angle of liquid Fe–S in olivine aggregate observed in previous microstructural analysis of polished sample cross sections. Here, in this work, we carry out direct measurements of elastic wave velocities of liquid Fe–S-bearing olivine aggregate and report strong reduction of the elastic wave velocities in the presence of liquid Fe–S. The effects of liquid Fe–S in olivine aggregates are much more pronounced than the theoretical estimation. Three-dimensional X-ray microtomography analysis reveals that the geometry of liquid Fe–S strongly depends on the size, with larger liquid Fe–S blobs having low aspect ratios, which may predominantly affect elastic wave velocity. Since smaller spherical Fe–S blobs are much more abundant than the larger elongated blobs, conventional dihedral angle analyses based on scanning electron microscope images tend to statistically over-sample smaller blobs and under-sample larger blobs. Our results suggest that the LVZ at the base of the lunar mantle can be explained by the presence of 4.3–5.0 vol.% liquid Fe–S. The LVZ may be a hidden reservoir of highly siderophile elements (HSEs), which may explain the low abundance of HSEs in the lunar mantle compared to the Earth.

58 GEOSCIENCES↗
DOE OSTI2020

The Sixth Data Release of the Radial Velocity Experiment (RAVE). I. Survey Description, Spectra, and Radial Velocities

The Radial Velocity Experiment (Rave) is a magnitude-limited (9 < I < 12) spectroscopic survey of Galactic stars randomly selected in Earth’s southern hemisphere. The Rave medium-resolution spectra (R ~ 7500) cover the Ca-triplet region (8410–8795 Å). The sixth and final data release (DR6) is based on 518,387 observations of 451,783 unique stars. Rave observations were taken between 2003 April 12 and 2013 April 4. Here we present the genesis, setup, and data reduction of Rave as well as wavelength-calibrated and flux-normalized spectra and error spectra for all observations in Rave DR6. Furthermore, we present derived spectral classification and radial velocities for the Rave targets, complemented by cross-matches with Gaia DR2 and other relevant catalogs. A comparison between internal error estimates, variances derived from stars with more than one observing epoch, and a comparison with radial velocities of Gaia DR2 reveals consistently that 68% of the objects have a velocity accuracy better than 1.4 km s{sup –1}, while 95% of the objects have radial velocities better than 4.0 km s{sup –1}. Stellar atmospheric parameters, abundances and distances are presented in a subsequent publication. The data can be accessed via the Rave website (http://rave-survey.org) or the Vizier database.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Forward modeling of Doppler velocity interferometer system for improved shockwave measurements

We report that when near-instantaneous shocks are recorded by using a Doppler velocity interferometer velocity interferometer system for any reflector (VISAR), they typically exceed the detector’s ability to react and “skipped fringes” result, where its visibility briefly reduces. Traditionally, replacing skipped fringes required guesswork in analysis, which increased arrival time errors. Second, the use of long but velocity-sensitive interferometer delays with fast detectors which can resolve the delay has traditionally been avoided because of the fear of confusing the arrival time signal. However, shorter delays produce smaller fringe phase shifts per velocity and, thus, can decrease velocity precision. We realize that while some loss of fringe information occurs at shock events, this is often just a partial loss and the residual fringe information can still hold valuable information. We describe a forward model (FM) of the interferometer action and detector blurring that assists with VISAR fringe analysis at skipping events: (1) more precise shock arrival times, (2) arrival time precision not limited by long delays, and (3) improved ghost subtraction, which improves accuracy over a broad time region. Lastly, we demonstrate the utility of a FM on National Ignition Facility and Laboratory for Laser Energetics Omega shots and discuss data process methods to increase the high time resolution of VISAR systems despite their limitations and complexities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Excitation of the Transverse Wave with Phase Velocity Lower than the Velocity of Light in an Equilibrium Plasma

The work of external sources uniformly distributed in a homogeneous plasma and exciting in it a circularly polarized wave with phase velocity lower than the velocity of light is analyzed. It is demonstrated that the plasma becomes transparent for the wave in the potential wells of which a sufficiently large number of electrons is trapped. The charged particle shielding effect disappears, and the excited wave amplitude becomes greater than the amplitude of the same wave in vacuum. If the frequency of the external sources approaches the resonant frequency of the wave loaded by the trapped electrons, the wave amplitude increases and reaches a maximum at resonance. The transverse wave excited by the external sources at the resonant frequency is capable to self-propagate in plasma with phase velocity lower than the velocity of light independently of the support by the external sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

High P‐T Sound Velocities of Amphiboles: Implications for Low‐Velocity Anomalies in Metasomatized Upper Mantle

Abstract Metasomatized mantle xenoliths containing hydrous minerals, such as amphiboles, serpentine, and phlogopite, likely represent the potential mineralogical compositions of the metasomatized upper mantle, where low seismic velocities are commonly observed. This study presents the first experimentally determined single‐crystal elasticity model of an Fe‐free near Ca, Mg‐endmember amphibole tremolite at high pressure and/or temperature conditions (maximum pressure 7.3(1) GPa, maximum temperature 700 K) using Brillouin spectroscopy. We found that sound velocities of amphiboles strongly depend on the Fe content. We then calculated the sound velocities of 441 hydrous‐mineral‐bearing mantle xenoliths collected around the globe, and quantitatively evaluated the roles that amphiboles, phlogopite and serpentine played in producing the low velocity anomalies in the metasomatized upper mantle.

Geology↗
DOE OSTI2022

Machine-learning identification of the variability of mean velocity and turbulence intensity for wakes generated by onshore wind turbines: Cluster analysis of wind LiDAR measurements

Light detection and ranging (LiDAR) measurements of isolated wakes generated by wind turbines installed at an onshore wind farm are leveraged to characterize the variability of the wake mean velocity and turbulence intensity during typical operations, which encompass a breadth of atmospheric stability regimes and rotor thrust coefficients. The LiDAR measurements are clustered through the k-means algorithm, which enables identifying the most representative realizations of wind turbine wakes while avoiding the imposition of thresholds for the various wind and turbine parameters. Considering the large number of LiDAR samples collected to probe the wake velocity field, the dimensionality of the experimental dataset is reduced by projecting the LiDAR data on an intelligently truncated basis obtained with the proper orthogonal decomposition (POD). The coefficients of only five physics-informed POD modes are then injected in the k-means algorithm for clustering the LiDAR dataset. The analysis of the clustered LiDAR data and the associated supervisory control and data acquisition and meteorological data enables the study of the variability of the wake velocity deficit, wake extent, and wake-added turbulence intensity for different thrust coefficients of the turbine rotor and regimes of atmospheric stability. Furthermore, the cluster analysis of the LiDAR data allows for the identification of systematic off-design operations with a certain yaw misalignment of the turbine rotor with the mean wind direction.

17 WIND ENERGY↗
DOE OSTI2020

An Extreme-precision Radial-velocity Pipeline: First Radial Velocities from EXPRES

The EXtreme-PREcision Spectrograph (EXPRES) is an environmentally stabilized, fiber-fed, R = 137,500, optical spectrograph. It was recently commissioned at the 4.3 m Lowell Discovery Telescope near Flagstaff, Arizona. The spectrograph was designed with a target radial-velocity (RV) precision of 30 cm s{sup −1}. In addition to instrumental innovations, the EXPRES pipeline, presented here, is the first on-sky, optical, fiber-fed spectrograph to employ many novel techniques—including an “extended flat” fiber used for wavelength-dependent quantum efficiency characterization of the CCD, a flat-relative optimal extraction algorithm, chromatic barycentric corrections, chromatic calibration offsets, and an ultra-precise laser frequency comb for wavelength calibration. We describe the reduction, calibration, and RV analysis pipeline used for EXPRES and present an example of our current sub-meter-per-second RV measurement precision, which reaches a formal, single-measurement error of 0.3 m s{sup −1} for an observation with a per-pixel signal-to-noise ratio of 250. These velocities yield an orbital solution on the known exoplanet host 51 Peg that matches literature values with a residual rms of 0.895 m s{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Neutron star kick velocity induced by neutrino chirality flip and a lower bound for the neutrino magnetic moment

We study the neutrino chirality flip during the birth of a neutron star, produced in a core made of strange quark matter. This mechanism is applied to the neutron star kick velocity problem and we show that it is efficient when the neutrino magnetic moment is not smaller than 4.7 × 10 −15 μ B , where μ B is the Bohr magneton. When this lower bound is combined with the most stringent upper bound, our results set a range for the neutrino magnetic moment given by 4.7 × 10 −15 ≤ μ ν / μ B ≤ (0.1 − 0.4) × 10 −11 . The obtained kick velocities for natal conditions are consistent with the observed ones and span the correct range of radii for typical magnetic field intensities.

Ayala, Alejandro↗
DOE OSTI2025

Tidal energy resource characterization measurements at Cook Inlet’s East Foreland: Velocity and turbulence

To characterize tidal current and turbulence at a top tidal energy site off the East Foreland in Cook Inlet, Alaska, United States, three moorings were deployed for two months between July and August 2021, and a transect survey was conducted over the course of two tidal cycles at the end of the deployment period. Measurements of velocity and turbulence were then analyzed to better understand the site's hydrodynamics and power potential. Analysis reveals that swift, north-flowing flood currents peak at 4~m/s, while south-flowing ebb currents reach just over 3~m/s. Turbulence intensity ranges from 23\% at the seafloor to 8\% near the surface, and the presence of the foreland creates more intense turbulence near-shore during ebb tide than flood. Power availability at the site could be as high as 720~MW, or 13~kW/m$^2$, though the energy available to a marine energy device will be smaller than this estimate because of water-to-wire efficiency and wake losses. The results from this measurement campaign will inform the validation of a high-resolution tidal hydrodynamic model, as well as early tidal energy projects that are beginning to move beyond the prototyping and demonstration stages to full-scale deployments.

McVey, James R.↗