Benefits and biases of VHF and GPS telemetry: A case study of American alligator spatial ecology: Comparison of VHF and GPS Technology
Not provided.
Biodiversity & Conservation↗
SEARCH · Search NASA
Results for “VHF”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanical design and fabrication of the VHF-gun, the Berkeley normal-conducting continuous-wave high-brightness electron source
A high repetition rate, MHz-class, high-brightness electron source is a key element in future high-repetition-rate x-ray free electron laser-based light sources. The VHF-gun, a novel low frequency radio-frequency gun, is the Lawrence Berkeley National Laboratory (LBNL) response to that need. The gun design is based on a normal conducting, single cell cavity resonating at 186 MHz in the VHF band and capable of continuous wave operation while still delivering the high accelerating fields at the cathode required for the high brightness performance. The VHF-gun was fabricated and successfully commissioned in the framework of the Advanced Photo-injector EXperiment, an injector built at LBNL to demonstrate the capability of the gun to deliver the required beam quality. In conclusion, the basis for the selection of the VHF-gun technology, novel design features, and fabrication techniques are described.
47 OTHER INSTRUMENTATION↗
TH-AB-209-09: Quantitative Imaging of Electrical Conductivity by VHF-Induced Thermoacoustics
Purpose: To demonstrate that very high frequency (VHF) induced thermoacoustics has the potential to provide quantitative images of electrical conductivity in Siemens/meter, much as shear wave elastography provides tissue stiffness in kPa. Quantitatively imaging a large organ requires exciting thermoacoustic pulses throughout the volume and broadband detection of those pulses because tomographic image reconstruction preserves frequency content. Applying the half-wavelength limit to a 200-micron inclusion inside a 7.5 cm diameter organ requires measurement sensitivity to frequencies ranging from 4 MHz down to 10 kHz, respectively. VHF irradiation provides superior depth penetration over near infrared used in photoacoustics. Additionally, VHF signal production is proportional to electrical conductivity, and prostate cancer is known to suppress electrical conductivity of prostatic fluid. Methods: A dual-transducer system utilizing a P4-1 array connected to a Verasonics V1 system augmented by a lower frequency focused single element transducer was developed. Simultaneous acquisition of VHF-induced thermoacoustic pulses by both transducers enabled comparison of transducer performance. Data from the clinical array generated a stack of 96-images with separation of 0.3 mm, whereas the single element transducer imaged only in a single plane. In-plane resolution and quantitative accuracy were measured at isocenter. Results: The array provided volumetric imaging capability with superior resolution whereas the single element transducer provided superior quantitative accuracy. Combining axial images from both transducers preserved resolution of the P4-1 array and improved image contrast. Neither transducer was sensitive to frequencies below 50 kHz, resulting in a DC offset and low-frequency shading over fields of view exceeding 15 mm. Fresh human prostates were imaged ex vivo and volumetric reconstructions reveal structures rarely seen in diagnostic images. Conclusion: Quantitative whole-organ thermoacoustic tomography will be feasible by sparsely interspersing transducer elements sensitive to the low end of the ultrasonic range.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
High-Rate Fabrication of a-Si-Based Thin-Film Solar Cells Using Large-Area VHF PECVD Processes
The University of Toledo (UT), working in concert with it’s a-Si-based PV industry partner Xunlight Corporation (Xunlight), has conducted a comprehensive study to develop a large-area (3ft x 3ft) VHF PECVD system for high rate uniform fabrication of silicon absorber layers, and the large-area VHF PECVD processes to achieve high performance a-Si/a-SiGe or a-Si/nc-Si tandem junction solar cells during the period of July 1, 2008 to Dec. 31, 2011, under DOE Award No. DE-FG36-08GO18073. The project had two primary goals: (i) to develop and improve a large area (3 ft × 3 ft) VHF PECVD system for high rate fabrication of > = 8 Å/s a-Si and >= 20 Å/s nc-Si or 4 Å/s a-SiGe absorber layers with high uniformity in film thicknesses and in material structures. (ii) to develop and optimize the large-area VHF PECVD processes to achieve high-performance a-Si/nc-Si or a-Si/a-SiGe tandem-junction solar cells with >= 10% stable efficiency. Our work has met the goals and is summarized in “Accomplishments versus goals and objectives”.
14 SOLAR ENERGY↗
Study of CNT growth using nanocatalyst Ag precursor by HWC-VHF-PECVD
The study of CNT growth has been done by using silver (Ag) nanocatalyst as a guide precursor on corning glass 7059 substrate. The silver catalyst was prepared by the evaporation method by varying deposition time for 50, 25, and 14 seconds. The silver films were then annealed at temperature of 400°C for 4 hours. From Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) results the grain sizes are 65 nm, 57 nm, and 33 nm, and also the atomic compositions are 6,06%, 4,52%, and 3,73% for 14, 25 and 50 seconds samples, respectively. The 33 nm samples were then used for CNT growth by using Hot Wire Cell (HWC) – Very High Frequency (VHF) – Plasma Enhanced Chemical Vapor Deposition (PECVD) at 275 ° C deposition temperature and pressure of 300 mTorr. The rf power was varied from 8 to 20 watts, with deposition time for 60 minutes. The methane (CH4) 99.999% was used as Carbon sources. Hydrogen gas (H2) was used to etch the oxide layer formed during the pre-deposition process. The diameter and length for the CNT are 125 nm and 1.650 to 2.989 nm respectively.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Effect of power on growth of nanocrystalline silicon films deposited by VHF PECVD technique for solar cell applications
An investigation of the effect of power on the deposition of nanocrystalline silicon thin films were carried out using a gaseous mixture of silane and hydrogen in the 60MHz assisted VHF plasma enhanced chemical vapor deposition (PECVD) technique. The power was varied from 10 to 50 watt maintaining all other parameters constant. Corresponding layer properties w.r.t. material microstructure, optical, hydrogen content and electrical transport are studied in detail. The structural properties have been studied by Raman spectroscopy and x-ray diffraction (XRD). The presence of nano-sized crystals and their morphology have been investigated using atomic force microscopy (AFM). The role of bonded hydrogen content in the films have been studied from the results of Fourier transform infrared spectroscopy. It was observed from the results that with increase in power, crystalline volume fraction increases and crystallite size changes from 4 to 9 nm. The optical band gap varies from 1.7 to 2.1eV due to quantum confinement effect and which further can be explained with reduced hydrogen content. These striking features of nc-Si films can be used to fabricate stable thin film solar cells.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Graphene-based tunable non-foster circuit for VHF applications
This paper presents a negative impedance converter (NIC) based on graphene field effect transistors (GFETs) for VHF applications. The NIC is designed following Linvill’s open circuit stable (OCS) topology. The DC modelling parameters of GFET are extracted from a device measured by Meric et al. [IEEE Electron Devices Meeting, 23.2.1 (2010)] Estimated parasitics are also taken into account. Simulation results from Keysight Advanced Design System (ADS) show good NIC performance up to 200 MHz and the value of negative capacitance is directly proportional to the capacitive load. In addition, it has been shown that by varying the supply voltage the value of negative capacitance can also be tuned. The NIC stability has been tested up to 2 GHz (10 times the maximum operation frequency) using Nyquist stability criterion to ensure there are no oscillation issues.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Description of the code ANVIL (ANisotropic Vhf Impulse Location)
In this paper, we have developed a general, three-dimensional method to locate sources of earth-directed radiation which takes into account the flight paths of reflected signals. While time-of-arrival algorithms exist for locating radio sources using line-of-sight propagation paths, radio sources originating above the surface of the earth will not necessarily emit strong power along direct paths to satellites. A combination of direct and ground-reflected pulses or only ground-reflected signals from such sources could be received by satellite-borne sensors. The work presented here applies to satellite detection of sub-ionospheric radio sources in a vacuum environment with ideal reflection off the earth's surface. Because satellites are not static receivers, their configuration with respect to a radio source is not always optimal. Therefore, a statistical study is performed using 1000 randomized configurations of 24 satellites in middle earth orbit. For each configuration, the radio source latitude and longitude is fixed, and its altitude is varied from 1 to 97 km. An analytic direct-path algorithm using the five satellites nearest the radio source provides an initial guess for the radio source latitude and longitude. We find that, using this approximation, the mean error in the calculated nadir location has a maximum value of 134 m for the 97-km source altitude. The coordinates of the initial guess are used to define the origin of a grid within which an all-points search refinement is performed. Finally, using this procedure, the overall maximum mean error in radio source position is found to be on the order of the computational grid size.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
EMR Analysis of Vaguely Defined Commercial Systems Re: EMR Analysis of Motorola Handheld Radios APX 7000 and APX 8000 with VHF and UHF bands
Modern manufacturing requires the use of many Commercial Off-The Shelf (COTS) tools and systems on the production floor. Wireless communications is prevalent in modern COTS devices. COTS equipment come with little information regarding what EXACTLY is in the equipment. Many vendors do not even have data for what is in their equipment – built to spec. Our industry has unique requirements and very few vendors design to meet our needs.
99 GENERAL AND MISCELLANEOUS↗
Using the SLAC VHF and UHF Radio Systems
Explore the source record for details and available documents.
Struven, W.↗
Investigating the Accuracy of Water Models through the Van Hove Correlation Function
In this study, we present molecular-simulation-based calculations of the Van Hove correlation function (VHF) of water using multiple modeling approaches: classical molecular dynamics with simple three-site nonpolarizable models, with a polarizable model, and with a reactive force field; density functional tight-binding molecular dynamics; and ab initio molecular dynamics. Due to the many orders of magnitude difference in the computational cost of these approaches, we investigate how small and short the simulations can be while still yielding sufficiently accurate and interpretable results for the VHF. We investigate the accuracy of the different models by comparing them to recently published inelastic X-ray scattering measurements of the VHF. We find that all of the models exhibit qualitative agreement with the experiments, and in some models and for some properties, the agreement is quantitative. This work lays the foundation for future simulation approaches to calculating the VHF for aqueous solutions in bulk and under nanoconfinement.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Combined Optical and Radio-Frequency Perspectives on a Hybrid Cloud-To-Ground Lightning Flash Observed by the FORTE Satellite
In this work, we use the coincident optical and radio-frequency (RF) measurements taken by the Fast On-orbit Recording of Transient Events (FORTE) satellite to shed light on common optical signatures recorded by NASA and NOAA lightning imagers during Cloud-to-Ground (CG) lightning. We build flash cluster data for FORTE using the same techniques as the NASA/NOAA instruments to document the optical/RF evolution of an oceanic hybrid -CG flash. The flash began with strong Very High Frequency (VHF)-band emission from a Narrow Bipolar Event (NBE) that initiated a period of normal bilevel intracloud (IC) activity in two vertical layers (8 and 12 km) that lasted for 490 ms. VHF waveforms show step leader activity ahead of the return stroke. All impulsive VHF sources after the stroke come from the lower (8 km) layer. K-changes are noted following the return stroke, but no subsequent strokes are detected. The optical flash began 136 ms after the NBE RF pulse. Twenty-two of the 33 optical groups were dim and occurred during the in-cloud phase of the flash. This activity included both isolated pulses and sustained periods of illumination over tens of milliseconds. Initial cloud pulses accounted for 23% of the total optical radiance from the flash. Illumination during the return stroke contributed 58% of the total radiance, and the K-changes and cloud pulses after the stroke supplied the remaining 19%. These results highlight the benefit of having RF alongside optical lightning measurements for clarifying signatures in the optical data and providing information on their physical origins.
54 ENVIRONMENTAL SCIENCES↗
Combined Optical and Radio-Frequency Measurements of a Lightning Megaflash by the FORTE Satellite
The optical and VHF instrumentation on the Fast On-Orbit Recording of Transient Events (FORTE) satellite is used to document the combined phenomenology evolution of a lightning “megaflash” – mesoscale lightning that propagates laterally over exceptional distances. We identify a FORTE flash whose maximum extent was 82 km and inferred length over multiple distinct branches exceeded 100 km. This flash lasted 1.2 s and produced 250 optical and 591 RF events. We find that the channel development mapped by FORTE’s pixelated lightning imager (LLS) occurred at a typical speed of 2.6x10 5 m s -1 and was accompanied by sustained periods of VHF emission that could individually exceed 100 ms in duration. The impulsive IC events generated by the flash indicate that this development occurred at altitudes between 3 and 8 km. Four +CG strokes were identified in the VHF waveform data that are responsible for two of the three highly-radiant LLS groups (two of the +CGs were not as optically bright as the others). These strokes occurred at different locations throughout the flash footprint with the most distant strokes separated by approximately 50 km. These space-based observations match previous observations of megaflashes as well as ground-based measurements of negative leader development during “spider” lightning, suggesting that FORTE is sensing the same phenomena.
Peterson, Michael Jay↗
Insights Into Lightning K‐Leader Initiation and Development From Three Dimensional Broadband Interferometric Observations
Abstract We report detailed observations of K‐leaders and the activity between them with the three‐dimensional Broadband Interferometric Mapping and Polarization system (BIMAP‐3D) at Los Alamos National Laboratory. It is found that K‐leaders have a general propagation trend of initial acceleration and then gradual deceleration, and the corresponding very high frequency (VHF) radiation power is exponentially correlated with the leader speed. Based on the 3D development and simultaneous electric field change measurement, some simple K‐leaders can be modeled with time‐evolving point charges at the propagating leader tip and at the stationary origin. We found that the charge magnitude increases during the initial acceleration stage and stays relatively constant for the rest of the development. K‐leaders are observed to interact with other branches; the branches affect the leader's propagation speed, and may affect the charge transfer. After the occurrence of a K‐leader, VHF emissions are quenched for several milliseconds. VHF sources then reappear in an impulsive and scattered manner as “twinkling,” and these sources are found not uniquely on the so‐called needles, but also on the main channel. These twinkling sources start near the apparent positive leader tip, and extend back toward the direction of the flash origin at about 10 5 m/s, while the apparent positive tip continues to extend forward at about 10 4 m/s. The twinkling extending toward the direction of flash origin appears to initiate the following K‐leader, although it may be interrupted by a K‐leader along a different branch, or simply die out without more K‐leader activity.
54 ENVIRONMENTAL SCIENCES↗
Radio Frequency Sensor: Very High Frequency Radio Frequency Lightning Detection in Geostationary Orbit
Abstract The Radio Frequency Sensor (RFS), a new radio frequency lightning detector, was launched into geosynchronous orbit in December 2021, and first collected data in January 2022. RFS is a specialized software‐defined radio receiver that detects, records, and reports impulsive broadband radio‐frequency (RF) signatures from lightning in the very high frequency (VHF; 30–300 MHz) range. Its vantage point from a Western hemisphere geosynchronous orbit provides unique opportunities to study evolution of RF lightning signatures over the durations of thunderstorms over the Americas and Pacific Ocean. Its overlapping view with the Geostationary Lightning Mappers (GOES‐16 & 17) enables additional comparisons between the sources of optical emissions and associated VHF emissions that were not possible with previous sensors. We find that RFS preferentially detects bright VHF signals called transionospheric pulse pairs (trans‐ionospheric pulse pairs (TIPPs)). It is estimated that more than 85% of the RFS‐detected lightning events are TIPPs. This paper presents initial results from the first year and a half of on‐orbit operation.
54 ENVIRONMENTAL SCIENCES↗
Quantum metrology of low-frequency electromagnetic modes with frequency upconverters
We present the RF Quantum Upconverter (RQU) and describe its application to quantum metrology of electromagnetic modes between dc and the very high frequency band (VHF) ( ≲ 300 MHz). The RQU uses a Josephson interferometer made up of superconducting loops and Josephson junctions to implement a parametric interaction between a low-frequency electromagnetic mode (between dc and VHF) and a mode in the microwave C Band ( ∼ 5 GHz), analogous to the radiation pressure interaction between electromagnetic and mechanical modes in cavity optomechanics. We analyze RQU performance with quantum amplifier theory and show that the RQU can operate as a quantum-limited op-amp in this frequency range. It can also use nonclassical measurement protocols equivalent to those used in cavity optomechanics, including back-action evading (BAE) measurements, sideband cooling, and two-mode squeezing. These protocols enable experiments using dc VHF electromagnetic modes as quantum sensors with sensitivity better than the standard quantum limit (SQL). We demonstrate signal upconversion from low frequencies to the microwave C band using an RQU and show a phase-sensitive gain (extinction ratio) of 46.9 dB , which is a necessary step towards the realization of full BAE. Published by the American Physical Society 2025
Kuenstner, Stephen E. (ORCID:0000000346128846)↗
Upward propagation of gigantic jets revealed by 3D radio and optical mapping
Occasionally, lightning will exit the top of a thunderstorm and connect to the lower edge of space, forming a gigantic jet. Here, we report on observations of a negative gigantic jet that transferred an extraordinary amount of charge between the troposphere and ionosphere (~300 C). It occurred in unusual circumstances, emerging from an area of weak convection. As the discharge ascended from the cloud top, tens of very high frequency (VHF) radio sources were detected from 22 to 45 km altitude, while simultaneous optical emissions (777.4 nm OI emitted from lightning leaders) remained near cloud top (15 to 20 km altitude). This implies that the high-altitude VHF sources were produced by streamers and the streamer discharge activity can extend all the way from near cloud top to the ionosphere. The simultaneous three-dimensional radio and optical data indicate that VHF lightning networks detect emissions from streamer corona rather than the leader channel, which has broad implications to lightning physics beyond that of gigantic jets.
54 ENVIRONMENTAL SCIENCES↗
Quantum metrology of low frequency electromagnetic modes with frequency upconverters
We describe the RF Quantum Upconverter (RQU) and describe its application to quantum metrology of electromagnetic modes between dc and the Very High Frequency band (VHF) (≲300MHz). The RQU uses a Josephson interferometer made up of superconducting loops and Josephson junctions to implement a parametric interaction between a low-frequency electromagnetic mode (between dc and VHF) and a mode in the microwave C Band (~ 5GHz), analogous to the radiation pressure interaction between electromagnetic and mechanical modes in cavity optomechanics. The RQU can operate as a quantum-limited op-amp, or use protocols from optomechanics to implement non-classical measurement protocols equivalent to those used in cavity optomechanics, including back-action evading (BAE) measurements, sideband cooling, and two-mode squeezing. Furthermore, these protocols enable experiments using dc-VHF electromagnetic modes as quantum sensors.
Kuenstner, Stephen E.↗