Search NASA⌕ Search

SEARCH · Search NASA

Results for “Venusian”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Laboratory simulation of Venusian lightning

Evidence of lightning activity in the Venusian atmosphere has been obtained from the Venera 9, 11, and 12 spacecraft, and from the Pioneer Venus Orbiter (PVO). However, a search for optical pulses expected from Venusian lightning using the star sensor on the PVO did not detect any signals. It has been suggested that the star sensor did not detect lightning because Venusian lightning does not radiate in the 500- to 900-nm spectral region detected by the star sensor. In this paper, spectra obtained from a laboratory simulation of Venusian lightning are discussed. Both the laboratory spectrum and the results of a theoretical calculation of line intensities show that Venusian lightning can be expected to radiate strongly in the 600- to 900-nm spectral region. Hence, the failure of the star sensor to detect lightning must be caused by the low flashing rate or by the low intensity of Venusian lightning.

Borucki, W. J.↗

Crater destruction on the Venusian highlands by tectonic processes

It is apparent that few, if any, craters as old, or highly modified as Imbrian craters on the surface of the moon are present on the Venusian highlands, or indeed anywhere on the planet's surface. Degraded craters such as those seen on the Moon, Mercury, or Mars are conspicuously absent. Furthermore, virtually all the impact craters on the Venusian surface show modification only by extensional tectonics, whereas the Venusian highlands show modification by compression, strike-slip movement, and finally by extension. Presumably at an earlier time, the surface of Venus resembled the surfaces of the other inner planets. The relatively recent resurfacing event that produced the plains units may be a mechanism for covering the older craters in the plains, but these vast outpourings of lava cannot be invoked as a mechanism for covering the craters on the Venusian highlands. If the plains units had covered the highlands, the entire Venusian surface would appear to be as smooth as the plains units that are embayed by and, therefore, postdate the highlands. The last major tectonic events to affect the highlands such as those seen on Ovda Regio appear to be thrust faulting with consequent folding, followed by at least three episodes of strike-slip faulting and finally extensional faulting. To test whether such tectonic movements could have destroyed highlands crater, a preliminary experiment was conducted by using a Lunar Orbiter mosaic of the lunar uplands as an analog for the ancient Venusian highlands.

Pohn, Howard A.↗

Lunar and Venusian radar bright rings

Twenty-one lunar craters have radar bright ring appearances which are analogous to eleven complete ring features in the earth-based 12.5 cm observations of Venus. Radar ring diameters and widths for the lunar and Venusian features overlap for sizes from 45 to 100 km. Radar bright areas for the lunar craters are associated with the slopes of the inner and outer rim walls, while level crater floors and level ejecta fields beyond the raised portion of the rim have average radar backscatter. It is proposed that the radar bright areas of the Venusian rings are also associated with the slopes on the rims of craters. The lunar craters have evolved to radar bright rings via mass wasting of crater rim walls and via post-impact flooding of crater floors. Aeolian deposits of fine-grained material on Venusian crater floors may produce radar scattering effects similar to lunar crater floor flooding. These Venusian aeolian deposits may preferentially cover blocky crater floors producing a radar bright ring appearance. It is proposed that the Venusian features with complete bright ring appearances and sizes less than 100 km are impact craters. They have the same sizes as lunar craters and could have evolved to radar bright rings via analogous surface processes.

Thompson, T. W.↗

Venusian sinuous rilles

After a preliminary assessment of venusian channels, it now seems to be clear that the channels have distinctive classes, which imply a wide range of formation parameters and formation mechanisms. They include outflow channels mainly formed by mechanical erosion from very high discharge flow, and canali-type channels requiring either constructional process or mechanical erosion by rather exotic low-viscosity lava such as carbonatite or sulfur. Here we focus on venusian sinuous rilles. Venusian sinuous rilles are generally simple, and originate from a collapsed source. They are shallow and narrow downstream. The venusian sinuous rilles are distinct from canali-type channels, which exhibit almost constant morphologies throughout their entire length, and from outflow channels, which are characterized by wide anastomosing reaches. The lunar sinuous rilles could have been formed initially as constructional channels. However, incision was caused by the long flow duration and high temperatures of eruption, along with relatively large discharge rates, possibly assisted by a low viscosity of the channel-forming lava. Channel narrowing and levee formation suggest relatively fast cooling. The venusian channels could have had a similar sequence of formation including rapid cooling. Assuming the substrate is typical tholeiitic lava, the flowing lavas' temperatures have to be higher than the melting temperature of the substrate. The flow should have a low viscosity to cause turbulence and keep a high Reynolds number to sustain efficient thermal erosion. Determining eruption conditions also provide insights to estimate lava composition. Assuming a channel is formed mostly by thermal erosion, the channel's length and longitudinal profile are functions of lava properties. The depth profiles of the channel are measured by radar foreshortening methods and stereo images. Eruption conditions of channel forming lava can be estimated by the methods developed by Hulme.

Komatsu, G.↗

Formation of Venusian canali - Considerations of lava types and their thermal behaviors

Because liquid water is unstable at present venusian surface conditions, the discovery of channels (termed 'canali') on Venus thousands of kilometers long was not predicted. Low viscosity lavas that remain fluid for several thousand kilometers are considered to be the canali-forming agents; possible compositions of Venusian canali-forming lavas include komatiite and high-Fe-Ti 'lunar'-type basalts. Results of analytical and numerical models of these lavas reveal that total cooling is more efficient on Venus than on Earth, suggesting that Venusian lavas rapidly form insulating crusts, and, thus, that the canali lavas were essentially 'tube-fed.' The models also reveal that thermal erosion should be less efficient on Venus than on Earth, suggesting that Venusian channels are either the product of mechanical (rather than thermal) erosion or constructional processes.

Gregg, Tracy K. P.↗

Phase Transitions and Melting in the Venusian Basaltic Crust: Implications for Crustal Recycling

Understanding phase transitions and melting in the Venusian crust and the associated changes in density are critical to constrain crustal thickness, recycling, and remelting processes. For example, average surface conditions on Venus of 92 bars and 460 °C correspond to low-grade metamorphic conditions on Earth equivalent to hornfels- and greenschist-facies. Further, the primary igneous mineralogy in the Venusian crust should be replaced by metamorphic minerals over time and potentially melt, as temperatures and pressures increase with depth along geothermal gradients. Here, we use Perple_X (Connolly, 2005), a Gibbs free energy minimization program to calculates table phase equilibria over a range of pressure and temperature conditions for whole-rock compositions of a dry basalt, alkali basalt, and peridotite. Further, we extract mineral abundancies along five geotherms of 5, 10, 15, 20 and 25 °C/km and calculate the rock density after the extraction of melt. On the coldest geotherm of 5 °C/km, melting would start at ~ 197 km and ~121 km in the basalt and alkali basalt, respectively, and therefore at depths that significantly exceed the estimated thickness of the Venusian crust (8-25 km). A density cross-over, where the crustal density would exceed that of the mantle could potentially induce delamination and is estimated to occur at ~ 40 km for both compositions. On the 10 °C/km geotherm, melting of the basalt starts at 65 km and melt extraction only causes a gradual densification due the formation of initially lower melt proportions. In contrast, the alkali basalt starts to melt at a depth of ~ 57 km and the subsequent densification of the residual composition could trigger delamination at ~ 60km depth. For hotter geotherms (i.e., 25 °C/km gradient), melting would occur at shallower depths of 21 – 23 km. However, the basalt will not get significantly denser than the mantle while the residuum of the alkali basalt would reach a density cross-over at 30 km. Hence, differences in Venusian crustal compositions can significantly influence the thickness of the crust on individual geotherms. Our results demonstrate that phase transitions and melting are strongly dependent on the assumed geotherm and could, combined with geodynamic models, further constrain crustal parameters.

Julia Semprich↗

Morphometric comparison of Icelandic lava shield volcanoes versus selected Venusian edifices

Shield volcanoes are common landforms on the silicate planets of the inner Solar System, and a wide variety have recently been documented on Venus by means of Magellan observations. In this report, we emphasize our recently completed morphometric analysis of three representative Icelandic lava shields: the classic Skjaldbreidur edifice, the low-reflief Lambahraun feature, and the monogenetic Sandfellshaed shield, as the basis for comparison with representative venusian edifices (greater than 60 km in diameter). Our detailed morphometric measurements of a representative and well-studied set of Icelandic volcanoes permits us to make comparisons with our measurements of a reasonable subset of shield-like edifices on Venus on the basis of Magellan global radar altimetry. Our study has been restricted to venusian features larger than approximately 60 km in basal diameter, on the basis of the minimum intrinsic spatial resolution (8 km) of the Magellan radar altimetry data. Finally, in order to examine the implications of landform scaling from terrestrial simple and composite shields to larger venusian varieties, we have considered the morphometry of the subaerial component of Mauna Loa, a type-locality for a composite shield edifice on Earth.

Garvin, James B.↗

Meander properties of Venusian channels

Venusian lava channels have meander dimensions that relate to their mode of formation. Their meander properties generally follow terrestrial river trends of wavelength (L) to width (W) ratios, suggesting an equilibrium adjustment of channel form. Slightly higher L/W for many Venusian channels in comparison to terrestrial rivers may relate to nonaqueous flow processes. The unusually low L/W values for some Venusian and lunar sinuous rilles probably indicate modification of original meander patterns by lava-erosional channel widening.

Komatsu, G.↗

Computer Code Study of Asteroid Entry into Venusian Atmosphere: Pressure and Density Fields

Analysis of the cratering records on the Moon, Mercury, and Mars have shown similar size-frequency distributions of craters produced during the late heavy bombardment of the inner solar system (Strom, 1988). Venus provides a valuable data base of information on the impacting population for more recent time. Because of resurfacing events, the Venusian cratering record has been estimated to be only about 500 million years old, and for the most part is in pristine condition, thereby producing an opportunity to discover the properties (size/velocity distribution) of the objects that recently impacted its surface. The Magellan IR mapping of the Venusian surface has produced an extremely high-quality set of crater topographies. The observed deficit of small craters is qualitatively explained by atmospheric effects on impactor breakup and the retardation effects of pressure on crater formation. Information about resurfacing history and impactor flux population can only be conjectured using arrant approximations for atmospheric effects on crater size scaling, such as assuming the absence of pressure effects or using other ad hoc approximations for this dependence. The recent work by Ivanov et al.(1986; 1992); Phillips et al.(199 1; 1992); Schaber et al. (1992) and others support the notion that atmospheric effects may have strongly influenced the Venusian cratering record. The work reported here looks at the potential synergism of aerodynamic entry and the gas dynamic flow fields that govern during the time scale and in the vicinity of crater formation.

Schmidt, Robert M.↗

Ambient Effects on Basalt and Rhyolite Lavas under Venusian, Subaerial, and Subaqueous Conditions

Both subaerial and subaqueous environments have been used as analog settings for Venus volcanism. To assess the merits of this, the effects of ambient conditions on the physical properties of lava on Venus, the seafloor, and land on Earth are evaluated. Rhyolites on Venus and on the surface of Earth solidify before basalts do because of their lower eruption temperatures. Rhyolite crust is thinner than basalt crust at times less than about an hour, especially on Venus. At later times, rhyolite crust is thicker because of its lower latent heat relative to basalt. The high pressure on the seafloor and Venus inhibits the exsolution of volatiles in lavas. Vesicularity and bulk density are proportional, so that lavas of the same composition should be more dense on the seafloor and less dense on land. Because viscosity depends partly upon the fraction of unvesiculated water in a melt, basalts with the same initial volatile abundance will be least viscous on the seafloor and most viscous on land. Assuming the same preeruptive H2O contents, molten rhyolites on Venus will have viscosities approx. 10% that of rhyolites on land. Despite lower expected viscosities, under-water flows are more buoyant and should have heights like subaerial and Venusian lavas of the same composition and extrusive history. In cases where the influence of crust is insignificant, a volume of rhyolite will have a higher aspect ratio than the same volume of basalt, no matter what the environment. If flow rheology is dominated by the presence of strong crust, aspect ratios differ little among environments or between compositions. These analyses support a rhyolitic interpretation for the composition of Venusian festooned flows and a basaltic interpretation for the composition of Venusian steep-sided domes. Although ambient effects are significant, extrusion rate and eruption history must also be considered to explain analogous volcanic landforms on Earth and Venus.

Bridges, Nathan T.↗

Preliminary Analysis of Pyrite Reactivity Under Venusian Temperature and Atmosphere

Measurements of Venus surface chemistry suggest a basaltic composition with a predominantly CO2 atmosphere. In order to understand the reactivity of certain possible mineral species on the surface, previous simulation chambers conduct experiments at 1 atmosphere with a simplified CO2 atmosphere. Following this procedure, pyrite (FeS2) samples are used to estimate the reactivity of sulfide minerals under a Venusian atmosphere and climate. Sulfurous gas species have been identified and quantified in the Venusian atmosphere, and sulfurous gas and mineral species are known to be created through volcanism, which is suggested to still occur on the surface of Venus. This experimentation is necessary to constrain reactions that could occur between the surface and atmosphere of Venus to understand terrestrial geology in a thick and hot greenhouse atmosphere. Quantifying this reaction can lead to approximations necessary for further experimentation in more complex environments such as those in the GEER chamber at Glenn Research Center that can simulate pressure along with temperature and a more inclusive and representative Venusian atmosphere.

Venus surface↗

Consequences of Tidal Dissipation in a Putative Venusian Ocean

The solar tide in an ancient Venusian ocean is simulated using a dedicated numerical tidal model. Simulations with varying ocean depth and rotational periods ranging from minus 243 to 64 sidereal Earth days are used to calculate the tidal dissipation rates and associated tidal torque. The results show that the tidal dissipation could have varied by more than 5 orders of magnitude, from 0.001 to 780 gigawatts (GW), depending on rotational period and ocean depth. The associated tidal torque is about 2 orders of magnitude below the present day Venusian atmospheric torque, and could change the Venusian daylength by up to 72 days per million years depending on rotation rate. Consequently, an ocean tide on ancient Venus could have had significant effects on the rotational history of the planet. These calculations have implications for the rotational periods of similarly close-in exoplanetary worlds and the location of the inner edge of the liquid water habitable zone.

Dynamical evolution and stability↗

Consequences of Tidal Dissipation in a Putative Venusian Ocean

The solar tide in an ancient Venusian ocean is simulated using a dedicated numerical tidal model. Simulations with varying ocean depth and rotational periods ranging from −243 to 64 sidereal Earth days are used to calculate the tidal dissipation rates and associated tidal torque. The results show that the tidal dissipation could have varied by more than 5 orders of magnitude, from 0.001 to 780 GW, depending on rotational period and ocean depth. The associated tidal torque is about 2 orders of magnitude below the present day Venusian atmospheric torque, and could change the Venusian daylength by up to 72 days per million years depending on rotation rate. Consequently, an ocean tide on ancient Venus could have had significant effects on the rotational history of the planet. These calculations have implications for the rotational periods of similarly close-in exoplanetary worlds and the location of the inner edge of the liquid water habitable zone.

planets and satellites↗

Comparison of Venusian lightning observations

Spacecraft observations of Venusian lightning are reviewed to determine the energy dissipation rate. Optical sensors provide data on the total energy dissipated per flash, so long as the contributions of atomic oxygen and ionized carbon are accounted for. Radio probes yield information on the total lightning occurrences. Venera 9-12 radio surveys are reviewed, and event rates of 20-30/sec for Venera 11 are mentioned. Venera 9 observed a sole, 70 sec event period on the Venusian nightside. Comparisons are made between the recorded electromagnetic energy levels and terrestrial lightning data. The nightside occurrence rate is calculated to be 0.08 strokes/sq km per year, while the dayside exhibits 85 flashes/sq km per sec. Energy dissipation rates ranging from 0.0012-0.25 W/sq m are calculated for various flash durations. It is suggested that the lightning occurs in the clouds as part of an organized meteorological system.

Borucki, W. J.↗

Transport of Venusian rolling 'stones' by wind?

Simulations of Venusian wind processes are described which show that particles are moved by 'rolling' at wind speeds as much as 30 percent lower than those required for saltation threshold. This mode of wind transport is only observed for sustained periods in water on earth; thus, there are similarities between aqueous fluid transport on earth and atmospheric transport on Venus. The formation of small sand ridges and grooves oriented parallel to the wind direction is associated with the rolling of grains in Venusian simulations and these structures may be unique aeolian features on Venus.

Greeley, R.↗

Chemical analysis of aerosol in the Venusian cloud layer by reaction gas chromatography on board the Vega landers

The experiment on sulfuric acid aerosol determination in the Venusian cloud layer on board the Vega landers is described. An average content of sulfuric acid of approximately 1 mg/cu m was found for the samples taken from the atmosphere at heights from 63 to 48 km and analyzed with the SIGMA-3 chromatograph. Sulfur dioxide (SO2) was revealed in the gaseous sample at the height of 48 km. From the experimental results and blank run measurements, a suggestion is made that the Venusian cloud layer aerosol consists of more complicated particles than the sulfuric acid water solution does.

Gelman, B. G.↗

The age of the Venusian surface - Estimates using terrestrial crater data

It is hypothesized that the age of the Venusian northern hemisphere surface studied thus far could be as great as the average age of the earth's crust (450 Myr). This possibility arises because of the uncertainty of the role of active and inactive cometary nuclei in the crateral history of the earth. If the observed Venusian surface were 1 Byr old, then there would be traces of the impacts of a half dozen or more large cometary nuclei which penetrated the atmosphere and formed craters over 100 km in diameter.

Schaber, G. G.↗

VLF emission bursts in the terrestrial and Venusian nightside troughs

It is shown here that the 100-Hz emission bursts in the Venusian nightside ionosphere are remarkably similar to those of the terrestrial VLF saucer emissions in terms of their spatial and temporal characteristics and the properties of their magnetoplasma environment. It is proposed that the generation mechanism for such VLF sources should be considered as a viable alternative to lightning as a source of Venusian ionospheric whistler-mode emissions.

Maeda, Kaichi↗