Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical Visibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Reduction of display artifacts by random sampling

The application of random-sampling techniques to remove visible artifacts (such as flicker, moire patterns, and paradoxical motion) introduced in TV-type displays by discrete sequential scanning is discussed and demonstrated. Sequential-scanning artifacts are described; the window of visibility defined in spatiotemporal frequency space by Watson and Ahumada (1982 and 1983) and Watson et al. (1983) is explained; the basic principles of random sampling are reviewed and illustrated by the case of the human retina; and it is proposed that the sampling artifacts can be replaced by random noise, which can then be shifted to frequency-space regions outside the window of visibility. Vertical sequential, single-random-sequence, and continuously renewed random-sequence plotting displays generating 128 points at update rates up to 130 Hz are applied to images of stationary and moving lines, and best results are obtained with the single random sequence for the stationary lines and with the renewed random sequence for the moving lines.

Ahumada, A. J., Jr.↗
NASA NTRS1986

Visibility and aerosol measurement by diode-laser random-modulation CW lidar

Examples of diode laser (DL) random-modulation continuous wave (RM-CW) lidar measurements are reported. The ability of the measurement of the visibility, vertical aerosol profile, and the cloud ceiling height is demonstrated. Although the data shown here were all measured at night time, the daytime measurement is, of course, possible. For that purpose, accurate control of the laser frequency to the center frequency of a narrow band filter is required. Now a new system with a frequency control is under construction.

Takeuchi, N.↗
NASA NTRS1977

Voyager imaging experiment

The Voyager imaging experiment, which involves two independently operated television systems (a narrow- and a wide-angle camera), is designed to conduct investigations of the atmospheres and surface properties of Jupiter, Saturn, their satellites and Saturn's rings. Objects of the investigations include the horizontal and vertical structure of visible clouds, the vertical structure of high, optically thin scattering layers on Jupiter and Saturn, the Great Red Spot, the South Equatorial Belt, chromophores on Io and Titan, the geology of several satellites, the masses, spin axes and periods of rotation of several satellites, the radial distribution of material in Saturn's rings, and the optical scattering properties of the primaries, rings, and satellites at a variety of wavelengths and phase angles.

Smith, B. A.↗
NASA NTRS1974

Venus - Vertical transport rates in the visible atmosphere

The cloud particles on Venus are sufficiently small for their vertical distribution to be strongly affected by atmospheric turbulence. Reasonably firm estimates of the vertical distribution of cloud particles can be made from current interpretations of refraction, polarization, and absorption band data. These enable very firm upper limits to be placed on average vertical mass diffusion coefficients in the visible atmosphere. These upper limits are independent of the cloud particle composition or mode of formation, and of changes in the particle size distribution with altitude.

Prinn, R. G.↗
NASA NTRS1993

Three dimensional modeling of cirrus during the 1991 FIRE IFO 2: Detailed process study

A three-dimensional model of cirrus cloud formation and evolution, including microphysical, dynamical, and radiative processes, was used to simulate cirrus observed in the FIRE Phase 2 Cirrus field program (13 Nov. - 7 Dec. 1991). Sulfate aerosols, solution drops, ice crystals, and water vapor are all treated as interactive elements in the model. Ice crystal size distributions are fully resolved based on calculations of homogeneous freezing of solution drops, growth by water vapor deposition, evaporation, aggregation, and vertical transport. Visible and infrared radiative fluxes, and radiative heating rates are calculated using the two-stream algorithm described by Toon et al. Wind velocities, diffusion coefficients, and temperatures were taken from the MAPS analyses and the MM4 mesoscale model simulations. Within the model, moisture is transported and converted to liquid or vapor by the microphysical processes. The simulated cloud bulk and microphysical properties are shown in detail for the Nov. 26 and Dec. 5 case studies. Comparisons with lidar, radar, and in situ data are used to determine how well the simulations reproduced the observed cirrus. The roles played by various processes in the model are described in detail. The potential modes of nucleation are evaluated, and the importance of small-scale variations in temperature and humidity are discussed. The importance of competing ice crystal growth mechanisms (water vapor deposition and aggregation) are evaluated based on model simulations. Finally, the importance of ice crystal shape for crystal growth and vertical transport of ice are discussed.

Jensen, Eric J.↗
NASA NTRS1988

Mobile lidar system for measurement of water vapor mixing ratio and ozone number density

The Water Vapor Lidar was modified and extended to make differential absorption measurements of ozone. Water vapor measurements make use of a weak molecular scattering process known as Raman scattering. It is characterized by a shift in wavelength of the scattered beam of light relative to the incident one. Some of the energy of the incident photon is converted to vibrational or rotational energy within the molecule leaving the scattered photon shifted to a slightly longer wavelength. When performing water vapor measurements, profiles are acquired of water vapor mixing ratio from near the ground to beyond 7 km every 2 minutes. By forming a color composite image of the individual profiles, the spatial and temporal evolution of water vapor is visible with vertical resolution of 75 to 150m and temporal resolution of 2 minutes. The ozone lidar is intended for use as a cross calibration facility for other stationary ozone lidar systems. The ozone measurement employs the technique known as differential absorption. The backscattered laser radiation from two different wavelengths is measured. Successful measurements of 308 nm returns were made from 80 km with an averaging period of 6 hours. Using these data and a standard atmosphere density curve, an ozone number density profile was made which agrees very well with the standard ozone curve between 20 and 40 km.

Whiteman, D.↗
NASA NTRS1989

A simple analytical formula to compute clear sky total and photosynthetically available solar irradiance at the ocean surface

A simple but accurate analytical formula was developed for computing the total and the photosynthetically available solar irradiances at the ocean surface under clear skies, which takes into account the processes of scattering by molecules and aerosols within the atmosphere and of absorption by the water vapor, ozone, and aerosols. These processes are parameterized as a function of solar zenith angle, aerosol type, atmospheric visibility, and vertically integrated water-vapor and ozone amounts. Comparisons of the calculated and measured total and photosynthetically available solar irradiances for several experiments in tropical and mid-latitude ocean regions show 39 and 14 Wm/sq m rms errors (6.5 and 4.7 percent of the average measured values) on an hourly time scale, respectively. The proposed forumula is unique in its ability to predict surface solar irradiance in the photosynthetically active spectral interval.

Frouin, Robert↗
NASA NTRS1993

A mineralized zone in Western Candor Chasma, Mars

Spectral evidence from Viking and Phobos orbiting spacecraft suggests the local development of crystalline ferric oxides in a small region within Mars' equatorial Valles Marineris canyon system. This is the same area noted for its anomalous coloration in Viking Orbiter image 583 A by McEwen. The unique hue of the region in Viking color data is due to a reduced green filter reflectance, relative to violet and red, in comparison to surrounding materials of similar albedo or average reflectance. For this reason, the region does not appear spectrally distinctive in later Survey Mission images which were acquired without the green filter. In high resolution, the spectral unit can be seen to correspond to two 20 km long depressions on the margins of Candor Mensa, a heavily eroded plateau-forming deposit on the canyon floor. Laminae are conspicuous in several places on the plateau, particularly where 15 to 20 cycles of alternating bright and dark laminae are exposed at approximately 200 meter vertical intervals. Laminae are also visible on the steep, vertically fluted cliffs to the south of this depression. Concentric laminae indicate a basis in the depression on the southeastern margin of Candor Mensa at the location of the less pronounced hue anomaly. A distinct lineation at the base of the scarp at the western end of the canyon transects mottled canyon floor deposits believed to be among the youngest in the Valles marineris. Water is implicated in the formation of the iron oxides, since the steep surfaces of layered sediments elsewhere on Candor Mensa show no evidence of unusual coloration despite the fact that these materials were deposited concurrently with the strata exposed in the depressions. This suggests that the mineralization is secondary in nature and developed locally in association with the depressions, which could have ponded surface runoff or groundwater seepage.

Geissler, P. E.↗
NASA NTRS1979

Wavelength dependence of polarization. XXXV - Vertical structure of scattering layers above the visible Venus clouds

Results of multiple-scattering computations based on whole-disk and Digicon polarization observations are presented which indicate vertical inhomogeneity in the upper atmosphere of Venus. It is shown that the whole-disk observations support a thin upper haze layer of 0.18-micron particles and that the low polarization observed near the limb and terminator requires a haze of slightly larger particles. The Digicon polar regions are found to exhibit increased polarization, which is compatible with CO2 absorption measurements and is explained by increased molecular scattering above the clouds. The decrease in cloud-top height for latitudes greater than 45 deg is estimated to be approximately 1.4 km.

Lane, W. A.↗
NASA NTRS1985

Spectroradiometric calibration of the Thematic Mapper and Multispectral Scanner system

The effects of the atmosphere on propagating radiation must be known in order to calibrate an in orbit sensor using ground based measurements. A set of model atmosphere parameters, applicable to the White Sands (New Mexico) area is defined with particular attention given to those parameters which are required as input to the Herman Code. The radial size distribution, refractive index, vertical distribution, and visibility of aerosols are discussed as well as the molecular absorbers in the visible and near IR wavelength which produce strong absorption lines. Solar irradiance is also considered.

Palmer, J. M.↗
NASA NTRS1985

Pool fire-ventilation crossflow experiments in a simulated aircraft cabin interior

An experimental facility has been built to study pool fire dynamics and flame spread behavior in a 1/3-scale simulated aircraft interior; attention is presently given to pool fire ventilation crossflow using a 'channel' pool fire subjected to crossflow velocities that replicate postcrash conditions in a wide body aircraft. Crossflow velocity is noted to have a strong effect on visible flame geometry, tilting the flame over sharply. A reverse flow ceiling jet of hot gases was also present in all tests, however, and extended far upstream of the fire, so that despite the appearance of the visible flame, the vertical momentum of the plume was strong enough to establish the reverse flow layer and spread smoke and toxic gases upstream against a significant ventilating flow.

Bankston, C. P.↗
NASA NTRS1996

Development of the command data system and ground software for the SEDSAT-1 microsatellite

SEDSAT-1 is designed to be a low cost scientific satellite which is to be used to perform a minimum of five tasks which include: (1) the acquisition of a number of important parameters associated with the tethering processes from the payloads perspective (such as accelerations incurred and imaging data of the tether during deployment), (2) to act as a remote sensing platform for making measurements of the Earth's Atmosphere (allowing research to be performed in such areas as vertical lightning observation, visible light spectrography, and cloud cover studies, (3) to act as a general purpose amateur radio communication satellite relaying information back to earth, (4) to demonstrate the feasibility of the deployment in low earth orbit of advanced technology such as the Gallium Arsenide Solar Cells, Nickel Metal Hydride batteries, and multi-chip module technology and, (5) to support student's active participation in applying the disciplines of engineering and science to space-based hardware platforms. The project includes the Three-axis Accelerometer System, TAS, Experiment which is designed to report the accelerations that the satellite undergoes during the tethering operations and during the second phase of the mission when the free floating satellite comes in contact with orbit debris. The SEASIS (SEDS Earth, Atmosphere, and Space Imaging System) is another SEDSAT experiment designed to provide images of the tether during its deployment and the earth during the second phase of the mission. To control these experiments and virtually all other satellite operations the Command Data System, CDS is employed. This system utilizes a moderate complexity micro-controller controlled by tasks operating under a real-time operating system to dynamically monitor and control the satellite. The scope of this researchers efforts has been in the general area of coordinating and assisting the student researchers with the development of the CDS and ground station interfaces. This included the low level CDS hardware design and the formulization of a general software plan and schedule for both the CDS and ground station portions of the project.

Wells, B. Earl↗
NASA NTRS2002

Cloud Algorithm Design and Performance for the 2002 Geoscience Laser Altimeter System Mission

A satellite borne lidar instrument, the Geoscience Laser Altimeter System (GLAS), is to be launched in late 2002 and will provide continuous profiling of atmospheric clouds and aerosol on a global basis. Data processing algorithms have been developed to provide operational data products in near real time. Basic data products for cloud observations are the height of the top and bottom of single to multiple cloud layers and the lidar calibrated observed backscatter cross section up to the level of signal attenuation. In addition the optical depth and vertical profile of visible extinction cross section of many transmissive cloud layers and most haze layers are to be derived. The optical thickness is derivable in some cases from the attenuation of the molecular scattering below cloud base. In other cases an assumption of the scattering phase function is required. In both cases a estimated correction for multiple scattering is required. The data processing algorithms have been tested in part from aircraft measurements used to simulated satellite data. The GLAS lidar observations will be made from an orbit that will allow inter comparison with all other existing satellite cloud measurements.

Spinhirne, J. D.↗
NASA NTRS1982

Properties of dust in the Martian atmosphere and its effect on temperature structure

Data from the Viking lander imaging experiment and the IRIS experiment on board the Mariner 9 Orbiter are used to develop a one-dimensional radiative-convective model to describe the Mars temperature profile. Photography was employed to determine the optical depth, mean size, shape, visible absorption coefficient, and vertical distribution of aerosols in the Mars atmosphere. The calculation procedures are outlined, particularly for the particle size distribution function, which indicated a cross-sectional average particle radius of 2.5 microns. Dust-free conditions in the atmosphere near the equator and at lower altitudes permit full surface absorption of sunlight and subsequent adiabatic lapse rates. Difficulties were encountered in accurately modeling temperature profiles to fit Viking lander data, and resultant variations are attributed to effects of both suspended dust particles and large scale circulation.

Pollack, J. B.↗
NASA NTRS1983

Solar control of winter mesospheric echo occurrence at Poker Flat, Alaska

Winter mesospheric echoes are observed between about 55 and 80 km when auroral absorption is present during daylight hours. Relatively steady auroral absorption during sunrise and sunset periods causes a distinct onset and decay signature in mesospheric echo occurrence. The echo onset and disappearance time are shown versus height by the inclined lines for four different dates. The more vertical lines give the visible sunlight height/time curves for both sunrise (SR) and sunset (SS). The data is combined and replotted to give the morning onset height and the afternoon disappearance height as a function of solar zenith angle. Echoes are not observed at the lowest heights in the morning until the solar zenith angle is less than 90 deg. The afternoon echoes at the lowest heights also start to disappear as soon as the solar zenith angle exceeds 90 deg, implying that the solar component which sustains the mesospheric echo is screened by a layer extending up to about 60 km. The morning echo at 73 km onsets near the time of visible sunrise, but in the afternoon the 73 km echo lasts well past visible sunset.

Ecklund, W. L.↗
NASA NTRS1992

Additional results on space environmental effects on polymer matrix composites: Experiment A0180

Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure.

Tennyson, R. C.↗
NASA NTRS2019

Advances in Neural Network Detection and Retrieval of Multilayer Clouds for CERES Using Multispectral Satellite Data

An artificial neural network (ANN) algorithm, employing several Aqua MODIS infrared channels, the retrieved total cloud visible optical depth, and vertical humidity profiles is trained to detect multilayer (ML) ice-over-water cloud systems as identified by matched CloudSat and CALIPSO (CC) data. The multilayer ANN, or MLANN, algorithm is also trained to retrieve the optical depth and the top and base heights of the upper-layer ice clouds in ML systems. The trained MLANN was applied to independent MODIS data resulting in a combined ML and single layer hit rate of 80% (77%) for nonpolar regions during the day (night). The results are more accurate than currently available methods and the previous version of the MLANN. Upper-layer cloud top and base heights are accurate to ±1.2 km and ±1.6 km, respectively, while the uncertainty in optical depth is ±0.457 and ±0.556 during day and night, respectively. Areas of further improvement and development are identified and will be addressed in future versions of the MLANN.

CERES↗
NASA NTRS1992

A physical model of Titan's aerosols

A modeling effort is presented for the nature of the stratospheric haze on Titan, under several simplifying assumptions; chief among these is that the aerosols in question are of a single composition, and involatile. It is further assumed that a one-dimensional model is capable of simulating the general characteristics of the aerosol. It is suggested in this light that the detached haze on Titan may be a manifestation of organized, Hadley-type motions above 300 km altitude, with vertical velocities of 1 cm/sec. The hemispherical asymmetry of the visible albedo may be due to organized vertical motions within the upper 150-200 km of the haze.

Toon, O. B.↗