Search NASA⌕ Search

SEARCH · Search NASA

Results for “WATER INFLUX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Rapid and precise tracking of water influx and efflux across cell membranes induced by a pulsed electric field

Quantitative measurements of water content within a single cell are notoriously difficult. In this work, we introduce a single-shot optical method for tracking the intracellular water content, by mass and volume, of a single cell at video rate. We utilize quantitative phase imaging and a priori knowledge of a spherical cellular geometry, leveraging a two-component mixture model to compute the intracellular water content. We apply this technique to study CHO-K1 cells responding to a pulsed electric field, which induces membrane permeabilization and rapid water influx or efflux depending upon the osmotic environment. The effects of mercury and gadolinium on water uptake in Jurkat cells following electropermeabilization are also examined.

59 BASIC BIOLOGICAL SCIENCES↗

Vertical Transport of Water/Contaminant Due to Intermittent Water Influx on the Ground Surface of Vadose Zone - 20088

For movement of moisture and transport of contaminants in the vertical direction, two equations, the Richards equation and the advection-dispersion equation, are solved in a vadose zone for prescribed water and contaminant influx conditions at the ground surface. Two different boundary conditions are considered, one with a single peak of sinusoidal variation and four peaks of finite duration, each of which is sinusoidal in shape. The moisture migration is solved and then the contaminant transport, which is coupled to moisture movement, is solved. In the case of a single influx on the ground surface, at first the hydraulic head and moisture content show a peak. Then above the peak and below the ground surface, the peaks tend to die out, showing a tendency to return to the initial state. The vertical profile of concentration also shows a single peak, which soon becomes stagnant because downward water migration is faster than concentration profile movement. In the case of four intermittent array of peaks, the hydraulic head and moisture content profiles tend to merge and combine together. The concentration profiles show appearance of four peaks clearly. However, although the peak value of concentration remains quite constant, the values may vary with the sorption coefficient because of repeated influx of water and contaminant through the top boundary, the ground surface. The penetration depth decreases with an increasing sorption coefficient. (authors)

54 ENVIRONMENTAL SCIENCES↗

New model of Saturn's ionosphere with an influx of water from the rings

A radically different model of Saturn's ionosphere is proposed in which water plays a major role as a minor constituent present by downward diffusion from an external source. The model ionosphere is a classical F2 type layer resulting from the photodissociative production of H(+) from H2 and rapid chemical loss by a series of charge exchange reactions with water. A planet-wide influx of about 4 x 10 to the 7th molecules/sq cm/s of water from the rings is consistent with the observed ionospheric electron densities. An enhanced influx of water occurs at latitudes (-38, +44 deg) connected magnetically at the inner edge of Saturn's B ring, where an electromagnetic erosion process takes place. The present-day influx at these latitudes may be as large as 2 x 10 to the 9th molecules/sq cm/s.

Connerney, J. E. P.↗

Lessons from Earth Aerobiology for Venus Astrobiology

Venus’s clouds have often suggested as a possible habitat. The constraints governing putative airborne life in such a habitat in turn inform priorities and strategies for remote and in situ exploration, methods by which resulting biosignatures might be detected, exoplanet habitability assessment, and planetary protection concerns. Lessons drawn from studying Earth’s aerobiosphere can help improve this understanding. There are altitude ranges within Venus’s clouds in which temperature, pressure, particle size, and radiation appear to be within the limits of microbial life on Earth, and life cycles involving S- and Fe-based redox metabolism have been proposed. However, given the lack of a habitable surface reservoir, a long-term stable Venus aerobiosphere would require that the reproduction rate of the airborne microbes be faster than the settling rate of airborne microbes due to gravity, or eventually the population would be depleted; put another way, the mean generation time would need to exceed the mean residence time. This creates a joint constraint of aerosol dynamics, potential nutrient availability and energy influx, and bioenergetic costs such as desiccation and radiation damage. Even at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair and growth in response to transient water influx, such as from volcanism, is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – thus will also improve our understanding of Venus in an astrobiology context. In Earth’s troposphere, warm water clouds can carry 103 – 105 cells/mL, some metabolically active. However, Earth’s stratospheric sulfate aerosol layer may be a better analogue: supercooled sulfuric acidaerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 μm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Though ‘hot spots’ can occur associated with tropospheric mixing, viable cells in stratospheric samples are rare (~102 cells/m3), and primarily inactive forms such as spores. It is not yet clear whether such bioaerosols are associated with sulfate aerosols or simply co-located, and reproduction in situ has not yet been observed. In this model of a sparse, largely dormant Venus ecosystem, a single transect on descent is likely to pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. A targeted strategy would sample through an aerial region with some upwelling from surface sources, andtake multiple transects separated in time and space. This is compatible with other in situ science goals seeking to understand the dynamics and heterogeneities of Venus’s clouds.

Lower atmosphere↗

Lessons from Earth Bioaerosol Sampling for Venus Habitability & Biosignature Science

Venus’s clouds are often discussed as a potential habitat. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – will improve our understanding of Venus in an astrobiology context. Lessons from Earth’s aerobiosphere can inform these requirements and interpretation of results. A stable Venus aerobiosphere would need microorganisms to reproduce faster than they settle out due to gravity. This is a joint constraint of the potential nutrients and energy influx, bioenergetic costs such as desiccation and radiation damage, and aerosol dynamics. Though life cycles involving S- and Fe-based redox metabolism have been proposed, at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair, growth and reproduction in response to transient water influx (perhaps volcanism) is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. In Earth’s troposphere, clouds can carry 103 – 105 cells/mL, some metabolically active. A better analogue may be Earth’s stratospheric sulfate aerosol layer: supercooled sulfuric acid aerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 µm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Viable cells isolated from this region are rare (~102 cells/m3), though ‘hot spots’ at tropospheric mixing occur. Cells are primarily in inactive forms such as spores, and it is unclear if any are associated with sulfate aerosols or simply co-located. Given the heterogeneities in Venus clouds and the model of a sparse, largely dormant ecosystem, a single transect on descent would most likely pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. Even a passive aerial platform (balloon) may end up following a single air mass over its lifetime. A better strategy for Venus would target an aerial region with some upwelling from surface sources, and take multiple transects separated in time and space. Earth’s stratospheric bioaerosol population could provide a starting point for estimating the required lower volume and detection limits.

Earth↗

Irrigation-induced land water depletion aggravated by climate change

Agricultural irrigation has experienced rapid expansion, and its growing freshwater consumption is potentially exacerbating water scarcity issues. Previous studies predominantly relied on observations or land-only simulations, often neglecting land–atmosphere interactions or failing to capture long-term evolution. We therefore analyse the effects of historical irrigation expansion on water fluxes and resources using seven Earth system models. Here we show that irrigation expansion in many regions substantially decreases the net water influx from the atmosphere to land, further aggravating the existing drying trends caused by climate change. For example, irrigation expansion changed the trend of this net influx from −0.664 ( ± 0.283) to −1.461 ( ± 0.261) mm yr −2 in South Asia after 1960. Consequently, the local terrestrial water storage depletion rate is substantially enlarged by irrigation expansion (for example, from −2.559 ( ± 0.094) to −16.008 ( ± 0.557) mm yr −1 ). Our results attribute the land water loss to irrigation expansion and climate change, calling for immediate solutions to tackle the negative trends.

irrigation↗

Shifting groundwater fluxes in bedrock fractures: Evidence from stream water radon and water isotopes

Geologic features (e.g., fractures and alluvial fans) can play an important role in the locations and volumes of groundwater discharge and degree of groundwater-surface water (GW-SW) interactions. However, the role of these features in controlling GW-SW dynamics and streamflow generation processes are not well constrained. GW-SW interactions and streamflow generation processes are further complicated by variability in precipitation inputs from summer and fall monsoon rains, as well as declines in snowpack and changing melt dynamics driven by warming temperatures. Using high spatial and temporal resolution radon and water stable isotope sampling and a 1D groundwater flux model, we evaluated how groundwater contributions and GW-SW interactions varied along a stream reach impacted by fractures (fractured-zone) and below the fractured hillslope (non-fractured zone) in Coal Creek, a Colorado River headwater stream affected by summer monsoons. During early summer, groundwater contributions from the fractured zone dominated, but declined throughout the summer. Groundwater contributions from the non-fractured zone were constant throughout the summer and became proportionally more important later in the summer. We hypothesize that groundwater in the non-fractured zone is dominantly sourced from a high-storage alluvial fan at the base of a tributary that is connected to Coal Creek throughout the summer and provides consistent groundwater influx. Water isotope data revealed that Coal Creek responds quickly to incoming precipitation early in the summer, and summer precipitation becomes more important for streamflow generation later in the summer. We quantified the change in catchment dynamic storage and found it negatively related to stream water isotope values, and positively related to modeled groundwater discharge and the ratio of fractured zone to non-fractured zone groundwater. Importantly, we interpret these relationships as declining hydrologic connectivity throughout the summer leading to late summer streamflow supported predominantly by shallow flow paths, with variable response to drying from geologic features based on their storage. As groundwater becomes more important for sustaining summer flows, quantifying local geologic controls on groundwater inputs and their response to variable moisture conditions may become critical for accurate predictions of streamflow.

54 ENVIRONMENTAL SCIENCES↗

The ionosphere of Uranus - A myriad of possibilities

A one-dimensional model has been used to study the effects of exospheric temperature, methane and water influx, ionospheric outflow, and electron precipitation on the composition and structure of the ionosphere of Uranus. Peak ion concentrations range from 1000 to 1 million per cu cm with a wide variation in peak altitude, which depends strongly on the exospheric temperature. In all the cases considered, H(+) is the major ion in the topside ionosphere. At altitudes near or below the peak, H3(+) and CH5(+) can dominate, depending on the magnitude of CH4 and H2O influx. Atomic hydrogen column depths above the methane absorbing layer exceed 10 to the 17th per sq cm and can produce large (400 R) emissions of resonantly scattered Lyman-alpha. In the sunlit polar cap, electron precipitation with energy fluxes of 0.6 to 1.0 erg/sq cm s results in direct production of Lyman-alpha emissions that exceed 1 kR.

Chandler, M. O.↗

Current review of the Jupiter, Saturn, and Uranus ionospheres

The ionospheres of the major planets Jupiter, Saturn, and Uranus are reviewed in light of Pioneer and Voyager observations. Some refinements to pre-Voyager theoretical models are required to explain the results, most notably the addition of significant particle ionization from 'electroglow' and auroral processes and the need for additional chemical loss of protons via charge exchange reactions with water. Water from the Saturn rings has been identified as a major modifier of the Saturn ionosphere and water influx from satellites and/or meteorites may also be important at Jupiter and Uranus as well, as evidenced by the observed ionospheric structure and the identification of cold stratospheric carbon monoxide at Jupiter.

Waite, J. H., Jr.↗

Emerging Contaminants: Identification, Life Cycle, and Key Challenges - 20415

The term 'emerging contaminants' and its multiple variants has come to refer to previously overlooked compounds discovered in the environment which represent a potential threat to human and ecological receptors. These compounds may be discovered in the environment as new analytical techniques are developed and/or as new monitoring programs for drinking water and groundwater are implemented, while the threat to receptors may be realized through advances in understanding of toxicology and pathways to receptors. Emerging contaminants present unique and considerable challenges as demands to address them can outpace the understanding of their toxicity, their need for regulation, their occurrence, and techniques for treating the environmental media they affect. With these challenges in mind, this paper serves as a primer for understanding emerging contaminants. The paper will lay a foundation for understanding emerging contaminants through three key topics: 1. Who identifies emerging contaminants? An overview of the various stakeholder groups around the world working on identifying potential emerging contaminants and developing systems for screening potential candidates, prioritizing, and ultimately generating regulations will be provided. 2. How Chemicals Rise into Awareness as Emerging Contaminants. The process by which contaminants emerge through a cycle of awareness, characterization, management and regulation will be discussed. Current emerging contaminants will be discussed in the context of the life cycle: emerging contaminants where impacts to drinking water supplies are driving public awareness (e.g. per and polyfuoroalkyl substances (PFASs) and 1,4-dioxane), emerging contaminants impacted by changing regulatory standards or development and debate on toxicity (e.g., hexavalent chromium, 1,2,3-trichloropropane, trichloroethylene in vapor intrusion), and those with evolving understanding of impacts and usage (e.g., microplastics). 3. Key Challenges. Unique challenges associated with emerging contaminants, including visibility and public sensitivity, uncertainty and vulnerability, will be discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remote semi-continuous flow rate logging seepage meter

The movement of groundwater and its associated solutes from upland regions was implicated in the degradation of receiving surface water bodies. Current efforts to directly measure this influx of water incorporate manually operated seepage meters which are hindered by severe limitations. A prototype seepage meter was developed by NASA Langley Research Center and Virginia Polytechnic Institute and State University that will allow for the semi-continuous collection and data logging of seepage flux across the sediment water interface. The meter is designed to operate at depths to 40 meters, and alleviate or minimize all disadvantages associated with traditional methods while remaining cost effective. The unit was designed to operate independently for time periods on the order of weeks with adjustable sample sequences depending upon hydrologic conditions. When used in conjunction with commercially available pressure transducers, this seepage meter allows for correlations to be made between groundwater discharge and tidal/sea state conditions in coastal areas. Field data from the Chesapeake Bay and Florida Bay systems are presented.

Reay, William G.↗

Comet Shoemaker-Levy-9 impact with Jupiter: Aeronomical predictions

The fragments of comet Shoemaker-Levy-9 will enter the atmosphere of Jupiter during July 20-26, 1994. Significant amounts of water vapor will be injected into the upper atmosphere of Jupiter either from the comet itself or from the lower atmosphere of Jupiter. The photochemistry of both the neutral gas and the ionosphere will be greatly altered by the influx of this water vapor or the atomic oxygen generated by the dissociation of the water. Enhanced abundances of H2O (or other species such as NH3) in the atmosphere above the homopause should persist for at least a year and should be globally distributed. The odd oxygen (i.e., O or H2O or OH) associated with the cometary water influx alters the ion chemistry by removing H(+) ions, which also has the effect of reducing the ionospheric electron density because H(+) is ordinarily the main ion species in the Jovian ionosphere. The density of H3(+), both in the auroral and non-auroral ionosphere, will also be reduced due to presence of water. This ion species has been detected spectroscopically at Jupiter, and a drop in its abundance should be detectable. The major ion species will become H3O(+) which could reach a peak density as high as 10(exp 4)/cu cm in the non-auroral ionosphere and 10(exp 5)/cu cm in the auroral ionosphere. It should be possible to detect this ion species spectroscopically from Earth-based observatories.

Cravens, T. E.↗

CO2 on Titan

A sharp stratospheric emission feature at 667/cm in the Voyager infrared spectra of Titan is associated with the nu2 Q branch of CO2. A coupling of photochemical and radiative-transfer theory yields an average mole fraction above the 110 mbar level of (1.5 + 1.5 or - 0.8) x 10 to the -9th, with most of the uncertainty being due to imprecise knowledge of the vertical distribution. CO2 is found to be in a steady state, with its abundance being regulated principally by the 72 K cold trap near the tropopause and secondarily by the rate at which water-bearing meteoritic material enters the top of the atmosphere. An influx of water about 0.4 times that at the top of the terrestrial atmosphere is consistent with a combination of the observed CO2 abundance and a steady-state CO mole fraction of 0.00011; the thoeretical value for CO is close to the value observed by Lutz et al. (1983), although there are large margins for error in both numbers. If steady-state conditions for CO prevail, little information is available regarding the evolution of Titan's atmosphere.

Samuelson, R. E.↗

Constraining Venus Cloud Habitability: Earth's Aerobiosphere as an Analogue Environment

The potential habitability of Venus's cloud and haze layers has been debated for decades, with interest fueled by observations including disequilibria in atmospheric chemistry, strongly UV-absorbing particles, and (most recently) a controversial phosphine detection. Venus cloud temperature and pressure are clement by Earth standards; however, the calculated high acid activity and low water activity may exceed the limits of Earth biochemistry, based on observed life in extreme environments. A significant challenge in understanding Venus's habitability is the lack of an appropriate terrestrial analogue environment. Life has not been found in hydrothermal systems approaching Venus aerosol acidities, but these systems also contain high levels of other harsh solutes. Earth's stratospheric sulfate layer is a partial match in terms of acidity, desiccation, size, and isolation from the surface, but the few samples returned from these altitudes have yielded only sparse, inactive cells. Earth's tropospheric cloud droplets have an active microbial presence, but are larger and far more water-rich than Venus aerosols; tropospheric times aloft are also similar to microbial generation times, making Earth's aerobiosphere dependent on continuous surface replenishment. Direct detection of potential biosignatures from a single transect is challenging; Earth's cloud microbiota yields 102 - 108 viable cells per mL, equivalent to one per 103 - 109 particles, with highly dynamic and heterogeneous distribution. The most important in situ measurement for Venus cloud habitability is detailed aerosol composition: confirmation of acid and water activity, presence of potentially bioavailable nutrients and energy, and potential presence of organic matter. Modeling Venus cloud aerosol residence time in comparison to periodic influxes of water and photochemical energy, and thus the ability of an ecosystem to maintain itself over time, would also address a significant habitability constraint particular to aerobiospheres.

Venus↗

Cassini/CIRS Observations of Water Vapor in Saturn's Stratosphere

The Composite Infrared Spectrometer (CIRS) on the Cassini spacecraft has obtained numerous spectra of Saturn at varying spectral and spatial resolutions since Saturn Orbit Insertion in 2004. Emission lines due to water vapor in Saturn's stratosphere were first detected using whole-disk observations from the Infrared Space Observatory (Feuchtgruber et al 1997) and subsequently confirmed by the Submillimeter Wave Astronomy Satellite (Rergin et al 2000). CIRS has detected water and the data permit the retrieval of the latitudinal variation of water on Saturn. Emission lines of H2O on Saturn are very weak in the CIRS data. Thus. large spectral averages as well as improvements in calibration are necessary to detect water vapor. Zonally averaged nadir spectra were produced every 10 degrees of latitude. Stratospheric temperatures in the 0.5 - 5.0 mbar range were obtained by inverting spectra of CH4 in the v4 band centered at 1304 cm(exp -1). The origin of water vapor is believed to be from the ablation of micrometeorites containing water ice, followed by photochemistry. This external source of oxygen originates either from the Saturn system (from the rings or perhaps from Enceladus) or from the interplanetary medium. Connerney (1986) proposed a mechanism to transport water from the inner edge of the B-ring along magnetic field lines to specific latitudes (50N and 44S) on Saturn. Prange et al (2006) interpreted a minimum in the abundance of acetylene from ultraviolet spectra near 41S on Saturn as possibly due to an enhanced influx of water. Existing CIRS far-IR spectra are at relatively low spatial resolution, but observations at closer range planned for the extended mission will be able to test the "ring rain" mechanism by searching for localized water vapor enhancement at midlatitudes.

Bjoraker, G. L.↗

Cassini/CIRS Observations of Water Vapor in Saturn's Stratosphere

The Composite Infrared Spectrometer (CIRS) on the Cassini spacecraft has obtained numerous spectra of Saturn at varying spectral and spatial resolutions since Saturn Orbit Insertion in 2001. Emission lines due to water vapor in Saturn's stratosphere were first detected using whole-disk observations from the Infrared Space Observatory [1] and subsequently confirmed by the Submillimeter Wave Astronomy Satellite [2], CIRS has detected water and the data permit the retrieval of the latitudinal variation of water on Saturn. Emission lines of H2O on Saturn are very weak in the CIRS data. Thus, large spectral averages as well as improvements in calibration are necessary to detect water vapor. long integrations at the full 0.5/cm spectral resolution were performed at targeted latitudes on Saturn. High emission angles were chosen to enhance stratospheric emission. Over the course of the prime and extended mission a set of observations has been built up spaced roughly every 10 degrees of latitude. Stratospheric temperatures in the 0.5 - 5.0 mbar range were obtained by inverting spectra of CH4 in the v'4 band centered at 1501/cm. The origin of water vapor is believed to be from the ablation of micrometeorites containing eater ice, followed by photochemistry. This external source of oxygen originates either from the Saturn system (from the rings or perhaps from Enceladus) or from the interplanetary medium. Connerney [3] proposed a mechanism to transport water from the inner edge of the B-ring along magnetic field lines to specific latitudes (50N and 44S) on Saturn. Prange et al [4] interpreted a minimum in the abundance of acetylene from ultraviolet spectra gear 41S on Saturn as possibly due to an enhanced influx of water. We will be able to test the "ring rain" mechanism by searching, for localized water vapor enhancement at mid-latitudes. Our results may be used to constrain photochemical models of Saturn's stratosphere [5].

Bjoraker, Gordon↗

Proposed Mars Surveyor Landing Sites in Northern Meridiani Sinus, Southern Elysium Planitia, and Argyre Planitia

Our objective is to propose two landing sites that the Mars Surveyor 2001 Lander and Athena Rover could go to on Mars that should meet the safety requirements of the spacecraft landing system and optimize surface operations (chiefly driven by power and communications requirements). An additional site within Argyre Planitia, initially proposed by Parker to the Mars Surveyor Landing Site program, is also proposed for potential consideration for post-2001 missions to Mars, as it is well outside the current latitude limits for the Athena Rover. All three sites are designed to be situated as close to a diversity of geologic units within a few kilometers of the landing site so that diversity can be placed in a geologic context. This objective is very different from the Mars Pathfinder requirement to land at a site with a maximum chance for containing a diversity of rocks within a few tens of meters of the lander. That requirement was driven by the Sojourner mobility limit of a few tens of meters. It can be argued that the Athena project, with its much larger mobility capability, might actually want to avoid such a site, because placing collected samples in geologic context would be difficult. While it has been argued, both before and after the Mars Pathfinder landing, that the provenance for local blocks may be determined by orbiter spectra, primarily from the MGS TES instrument, our ability to do so has yet to be demonstrated. Indeed, several months after conclusion of the Pathfinder mission, we have yet to reach a consensus on the composition of local materials. Our primary data set for selecting a landing site within the latitude and elevation constraints of the 2001 mission is the Viking Orbiter image archive. The site must be selected to place the landing ellipse so as to avoid obvious hazards, such as steep slopes, large or numerous craters, or abundant large knobs. For this purpose, we chose a resolution limit of better than 50 m/pixel. This necessarily excludes from the present study images from current and future orbiter spacecraft, until such data does become readily available. Within each proposed region, it may be possible to identify additional sites once these data become available. Second, the fine-component thermal inertia data, should be greater than about 5 or 6 cgs Units (10(exp -3) cal/sq cm s(exp -0.5)/K). Low thermal inertias imply dusty environments, which could pose a mobility hazard. Similarly, the albedo of the site should not be particularly high, which would also suggest dusty surfaces. Low albedos are preferred, as they often coincide with low Viking red:violet ratios and indicate less dusty surfaces. Next, the Modeled Block Abundance should also not be too high or too low. Based on the Viking Lander and Mars Pathfinder experiences, percentages of blocks should be on the order of 5-25%. Too many blocks could pose a hazard to the landing and mobility. Too few blocks could also indicate a dusty surface. Primary Landing Site: Northern Meridiani Sinus (Proposed by T. J. Parker and K., S. Edgett) Vital Statistics: (1) Latitude, Longitude: 0-3 N, 350-2 W. *Elevation (Viking): about0.5-1.5 Ian. (2) Viking Orbiter Image coverage: Excellent coverage by 15 - 25 m/pixel images (orbits 709A and 410B). Possible stereo coverage in region where two orbits overlap (probably small parallax angle, as these orbits are not listed in NASA Contractor Report 3501) (3) Albedo: about .18 -.26 (4) Block Abundance: 5-26% (5)Fine-Component Thermal Inertia: 5-9 cgs units This region consists of bright deposits similar to those described by Edgett et al, that also lie within a prominent dark albedo region. These deposits are flat-lying, to such a degree that they ramp against topography rather than draping over it. This led Edgett and Parker to suggest that they may be subaqueous sediments, possibly lacustrine or marine evaporites, laid down sometime from the late Noachian to middle Hesperian (age determination pending crater counts). A contact between this material and elevated, dissected highlands to the south was identified , and is described by Edgett et al. Our desire in proposing this landing site is to sample the edge of this deposit where it has been exposed through etching, presumably eolian deflation (the deposit, though in the highlands, is itself only lightly to moderately cratered). This should enable access to in situ stratigraphy. The actual landing site will be selected where slopes are not expected to be steep, such that the rover itself should be able to traverse them and sample layered materials on the way, either up or down the slope. Perhaps due to uncertainties at this time as to the friability or meter-scale roughness of the deposit, it might make sense to place the landing ellipse on the exhumed highland surface adjacent to the deflated margin of the deposit and plan on driving to the deposit rather than landing on it and driving downslope. This should also enable imaging the margin for evidence of layering should it prove too difficult to climb. A target ellipse on the highland surface should also allow Athena access to ancient Noachian highland materials, particularly if placed near crater ejecta or an inlier of knobby material. Secondary Landing Site: Southern Elysium Planitia (Proposed by T. J. Parker) Vital Statistics: (1) Latitude, Longitude: 1.5-3.5 S, 195-198 W. (2) Elevation (Viking): -1.0 km. (3) Viking Orbiter Image coverage: Excellent coverage by 15 - 25 m/pixel images (orbit 725). Possible stereo coverage between images from beginning and end of orbit that overlap (probably small parallax angle) (4) Albedo: about .27-.28 (5) Block Abundance: 4-7% (6) Fine-Component Thermal Inertia: about 3 cgs units This region consists of eroded knobby material, probably of Noachian age, though much of the crater population has been destroyed, that is onlapped at a sharp contact by an extensive plains unit in southern Elysium Planitia that is Amazonian in age. The plains materials have been attributed to unusually low-viscosity flood lavas from fissures south of the Elysium volcanic rise, or to lacustrine materials associated with a large, Amazonian lake at the source of Marte Vallis. Parker and Schenk presented evidence in support of the latter interpretation, though they attributed the putative shore morphology to an embayment of a northern plains ocean into the southern Elysium region. Detailed examination of the margin of the deposit, showing erosion, not simply burial, of small crater rims and fluidized ejecta blankets, also points to lacustrine or marine sedimentation rather than volcanic plains burial. The plains surface exhibits a "crusty" appearance that many researchers have attributed to pressure ridges in lava flows. In a lacustrine context, they also resemble pressure ridges in desiccated evaporite deposits and salt-rimmed pools (now dry) similar in scale and morphology to spectacular, hundred meter-scale pool rims in alkaline Lake Natron, East African Rift. The eroded highland margin surface adjacent to these plains appears to be fairly smooth, even at 15 m/pixel. Isolated knob inliers are scattered from a few kilometers to several tens of "kilometers apart. Heights of the knobs have not been measured yet but, based on experience with similar features in the Pathfinder landing ellipse, are probably typically on the order of several tens of meters high and smaller, though some of the largest knobs in the region are probably up to a few hundred meters high. Two craters larger than a kilometer in diameter, with fluidized deposits, lie nearby the proposed landing site. Very high-resolution images from MOC should help to determine whether a landing site navigable by the Athena rover could be placed in this region. The space between knobs and craters is large enough to enable placement of a target landing ellipse between them but still provide access to one or more of them and to the margin of the Elysium plains material. Post-2001 Mars Surveyor Landing Site: Argyre Planitia (Proposed by T. J. Parker) Vital Statistics: (1) Latitude, Longitude: 55-56 S, 41-43 W. (2) Elevation (Viking): 1.0 km. (3) Viking Orbiter Image coverage: Excellent coverage by 40 m/pixel images (orbits 567B, 568B, and 569B). Excellent stereo coverage with large parallax angles over the entire landing site region, and much of central and southern Argyre. (4) Albedo: about .23-.24 (5) Block Abundance: No data (6) Fine-Component Thermal Inertia: No data The floors of both the Argyre and Hellas basins contain etched layered materials that are probably thick accumulations of channel or lacustrine sediments. The deposits in Hellas are much more eroded than those in Argyre, and Hellas lacks a channel outlet. Argyre is unique in that Uzboi Vallis flowed out of the basin, requiring overflow of a standing body of water within Argyre. This makes it the largest impact basin on Mars with channels both draining into it and flowing out from it. Hellas' channels may be catastrophic flood channels, whereas Argyre was fed by modest-scale valley networks, though the outlet at Uzboi Vallis was a catastrophic flood Highland craters and basins of this kind should be high-priority landing targets for missions intended to focus on the search for either prebiotic organic materials or even simple fossil microorganisms. Basins with internally-draining valley networks should be preferred over flood channels, as they could have provided the long-term influx of water favorable to the origin of life. (Catastrophic floods are not conducive to fossil preservation, due to their very short durations and high transportation energies). They also afford an opportunity to study the evolution of the planet's climate and volatiles during the period of time between the late Noachian and early Hesperian, when a drastic change from a proposed early warm, wet climate to one more closely resembling the modern environment is thought to have occurred. Large basin

Parker, T. J.↗

Electromagnetic wave absorption of multifunctional cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash: Effects of microstructure and hydration

Highlights: • The cementitious composite shows excellent wide-band electromagnetic wave absorption in a frequency range of 2–18 GHz. • The PVA fibers and the fly ash change the dielectric properties of the cementitious composite by Debye polarization. • The iron oxide of the cementitious binders contributes to the magnetic properties of the composites. • The impacts of the microstructure and the hydration of the cementitious composite on its microwave absorption are analyzed. This paper devises a novel method for the adjustment of the pore structure and the hydration of cement to improve the electromagnetic wave absorption of the cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash in a frequency range of 2–18 GHz. The underlying mechanism of the absorption is investigated to explore the possibility of the structural and functional integration of these composites. The electromagnetic parameters of the prepared cementitious composites and those of the raw materials are analyzed in a frequency range of 0.5–18 GHz. Moreover, the pore structure and the chemical environment of the cementitious composites are examined by mercury intrusion porosimetry (MIP), back-scattered electron detector (BSE), and X-ray photoelectron spectroscopy (XPS). The results indicate that the PVA fibers and the high-volume fly ash have a positive effect on electromagnetic wave absorption of the cementitious composites through the adjustment of their pore structure and hydration.

36 MATERIALS SCIENCE↗