Wire-mesh sensors: A review of methods and uncertainty in multiphase flows relative to other measurement techniques
Not Available
Tompkins, Casey (ORCID:0000000300112304)↗
SEARCH · Search NASA
Results for “WIRE MESH”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Charged particle tracking through electrostatic wire meshes using the finite element method
Wire meshes are used across many disciplines to accelerate and focus charged particles, however, analytical solutions are non-exact and few codes exist which simulate the exact fields around a mesh with physical sizes. A tracking code based in Matlab-Simulink using field maps generated using finite element software has been developed which tracks electrons or ions through electrostatic wire meshes. The fields around such a geometry are presented as an analytical expression using several basic assumptions, however, it is apparent that computational calculations are required to obtain realistic values of electric potential and fields, particularly when multiple wire meshes are deployed. The tracking code is flexible in that any quantitatively describable particle distribution can be used for both electrons and ions as well as other benefits such as ease of export to other programs for analysis. The code is made freely available and physical examples are highlighted where this code could be beneficial for different applications.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
CCD Photometry of bright stars using objective wire mesh
Obtaining accurate photometry of bright stars from the ground remains problematic due to the danger of overexposing the target and/or the lack of suitable nearby comparison stars. The century-old method of using objective wire mesh to produce multiple stellar images seems promising for the precise CCD photometry of such stars. Furthermore, our tests on β Cep and its comparison star, differing by 5 mag, are very encouraging. Using a CCD camera and a 20 cm telescope with the objective covered by a plastic wire mesh, in poor weather conditions, we obtained differential photometry with a precision of 4.5 mmag per two minute exposure. Our technique is flexible and may be tuned to cover a range as big as 6-8 mag. We discuss the possibility of installing a wire mesh directly in the filter wheel.
79 ASTRONOMY AND ASTROPHYSICS↗
Robust computational framework for wire-mesh sensor potential field calculations
Not Available
Clifford, Corey E.↗
Hydrodynamic and magnetohydrodynamic simulations of wire turbulence
In this paper, we report on simulations of laboratory experiments in which magnetized supersonic flows are driven through a wire mesh. The goal of the study was to investigate the ability of such a configuration to generate supersonic, MHD turbulence. We first report on the morphological structures that develop in both magnetized and non-magnetized cases. We then analyze the flow using a variety of statistical measures, including power spectra and probability distribution functions of the density. Using these results we estimate the sonic mach number in the flows downstream of the wire mesh. Finally, we find the initially hypersonic (M s = 20) planar shock through the wire mesh does lead to downstream turbulent conditions. However, in both magnetized and non-magnetized cases, the resultant turbulence was marginally supersonic to transonic (M s ~1), and highly anisotropic in structure.
(Magnetohydrodynamics) MHD↗
Dynamics of dust particles confined in imposed potential structures in strongly magnetized, low-temperature plasmas
A new phenomenon called imposed ordered structures has been of particular interest to the dusty plasma community within the past several years. These structures are a new type of pattern formation within a dusty plasma in which the dust particles become fixed to a background confining potential whose spatial structure is determined by some conducting element present in the plasma. In previous works, this element has typically been a conducting wire mesh. One of the unanswered questions is whether the dust particles become trapped beneath the conducting surface of the mesh or in the gaps (holes) between the wires. This work makes use of a new electrode whose shape is designed to mimic that of wire mesh, but with much larger dimensions to facilitate in situ diagnostic measurements. Observations of the dust show that particles become confined to the regions beneath the holes of this new electrode. Measurements of the dust particle velocities allow for a determination of the kinetic energy within the dust cloud which show that the particles are in an energetic steady state. Further, comparisons of spatial profiles of the particle velocities also show that the dust particles typically reside in areas of increased plasma glow, possibly being trapped by plasma filaments.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Investigation of Mechanical and Electromagnetic Interference Shielding Properties of Nickel–CFRP Textile Composites
The most common materials used for electromagnetic interference shielding are metals and their alloys. However, those materials are heavy and highly reflective. In order to eliminate or reduce the intensity of wave radiation in their working environment, lightweight materials that have interference shielding properties are needed. In this paper, nickel wire mesh yarns (warps) were woven into carbon fibers-reinforced plastic yarns (wefts) to produce metal–carbon textile composite materials. The plain weave and 2/2 twill weave techniques were used, and the woven fabrics were laminated to manufacture experimental test samples. The nickel, which has high magnetic permeability and good electric conductivity, and carbon fibers, which have good electrical, thermal and mechanical properties, were used together to achieve the desired properties. The shielding effectiveness of each sample was investigated using a network analyzer connected with coaxial transmission line test in accordance with ASTM 4935-99 standard, with the frequencies ranging from 500 MHz to 1.5 GHz. Here, the plain weave structure showed higher shielding effectiveness than twill weave. The absorption losses for both materials were relatively greater than reflection losses. In reference to the orientation of wire mesh yarns about the loading axis, the tensile strengths in the transversal direction were 19.04 and 16.34% higher than the tensile strengths in longitudinal direction for plain weave and twill weave, respectively. The fractography analysis with SEM showed a ductile fracture of wire mesh and brittle fracture of epoxy matrix and carbon fibers.
36 MATERIALS SCIENCE↗
Multi-parametric approach towards the assessment of radon and thoron progeny exposures
Conventionally, the dosimetry is carried out using radon and thoron gas concentration measurements and doses have been assigned using assumed equilibrium factors for the progeny species, which is inadequate pertaining to the variations in equilibrium factors and possibly due to significant thoron. In fact, since the true exposures depend upon the intricate mechanisms of progeny deposition in the lung, therefore an integrated approach for the assessment of progeny is essential. In this context, the recently developed deposition based progeny concentration measurement techniques (DTPS: Direct Thoron progeny sensors and DRPS: Direct Radon progeny sensors) appear to be best suited for radiological risk assessments both among occupational workers and general study populations. DTPS and DRPS consist of aluminized mylar mounted LR115 type passive detectors, which essentially detects the alpha particles emitted from the deposited progeny atoms on the detector surface. It gives direct measure of progeny activity concentrations in air. DTPS has a lower limit of detection limit of 0.1 Bq/m{sup 3} whereas that for DRPS is 1 Bq/m{sup 3}, hence are perfectly suitable for indoor environments. These DTPS and DRPS can be capped with 200-mesh type wire-screen to measure the coarse fraction of the progeny concentration and the corresponding coarse fraction deposition velocities as well as the time integrated fine fraction. DTPS and DRPS can also be lodged in an integrated sampler wherein the wire-mesh and filter-paper are arranged in an array in flow-mode, to measure the fine and coarse fraction concentration separately and simultaneously. The details are further discussed in the paper.
61 RADIATION PROTECTION AND DOSIMETRY↗
Electrode ink deposition system for high-throughput polymer electrolyte fuel cell
Systems for creating electrodes for polymer electrolyte membrane fuel cells include an XY stage having a heated vacuum table physically coupled to the XY stage. The vacuum table has a working face with a plurality of channels formed therein to communicate vacuum pressure from a port coupled to a vacuum source to the channels. A sheet of perforated heat-conductive material has staggered holes configured to evenly distribute the vacuum pressure from the channels through the perforated sheet. A heat-conductive wire mesh is placed over the perforated sheet, and has openings smaller than the staggered holes such that a membrane material placed on the wire mesh is not deformed by the vacuum pressure. A nanopipette or micropipette coupled to a pump is configured to deposit electrode ink onto an exposed surface of the membrane material as the controller device causes the XY stage to move the vacuum table to control deposition of the electrode ink onto the surface of the membrane material.
Park, Jae Hyung↗
Evaluating performance of two-group interfacial area transport equation for vertical small and large diameter pipes
In the two-fluid transport model, the coupling of mass, momentum and energy transfer between phases is highly dependent on interfacial area transfer terms. Several research efforts in the past have been focused on the development of an interfacial area transport equation model (IATE), in order to eliminate the drawbacks of static flow regime maps currently used in best-estimate thermal-hydraulic system codes. The IATE attempts to model the dynamics that are involved in two phase flows by accounting for the different interaction mechanisms affecting bubble transport in the flow. The further development and validation of IATE models has been hindered by the lack of adequate experimental data in regions beyond the bubbly flow regime. At the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) experiments utilizing wire mesh sensors have been performed over all flow regimes, establishing a database of high-resolution (in space and time) data. Two sets of data from small and large diameter pipes fitted with wire mesh sensors is utilized in this work. Analysis of flow conditions in the bubbly, churn turbulent and annular flow regimes is presented. The performance of the Fu-Ishii two-group model is evaluated against small diameter database. Results indicate good performance (< 10% error) for small group 1 bubbles, and poor performance for large group 2 bubbles. The Smith two-group large diameter IATE model is evaluated for the large diameter database. In low void-fraction regimes, the Smith model performs well. In high void-fraction regimes, there is poor group-wise interfacial area prediction - however the total interfacial area is erroneously predicted well as group-wise errors compensate each other. Overall, the study suggests that further efforts and re-evaluation of closure terms are needed in order to extend the range of validity of the IATE models. (authors)
42 ENGINEERING↗
Methods for the characterization of imposed, ordered structures in MDPX
Dusty plasmas have been studied in argon, radio frequency (rf) glow discharge plasmas with magnetic fields up to 1.5 T. Plasmas were formed between a powered bottom electrode and a grounded top electrode in which an aluminum wire mesh is fixed in the center. This work will examine the experimental conditions at which imposed, ordered structures form within the dusty plasma. These imposed, ordered structures, as reported in earlier works, are characterized by the alignment of dust particles to the spatial structure of the wire mesh in the top electrode and occur at high magnetic fields (B ≥ 1 T) and low neutral pressure (P ≤ 100 mTorr). A pair of parameters will be established to characterize the degree to which the dust particles are affected by these imposed ordered structures on both long and short time scales. Finally, using these parameters, it will be shown that a correlation exists between the onset of imposed, ordered structures and the magnetization of ions within the plasma.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
A simple template-based transfer method to fabricate Bradbury–Nielsen gates with uniform tension for ion mobility spectrometry
A Bradbury–Nielsen gate (BNG) consists of two interleaved and electrically isolated sets of wires. It is usually used to gate or modulate ion beams. Uniformly tense wires can remain parallel, equidistant, and coplanar over a wide working temperature range, which is critical to reliable BNG performance. Hence, this study analyzes the non-uniform tension of wires wound using traditional sequential winding methods in which the elastic modulus of the metal wire is much larger than that of the insulation substrate. To address this problem, a simple and reliable template-based transfer method is developed. First, a template with large elastic modulus is used to fabricate a wire mesh with uniform tension. The mesh is then transferred to the substrate. Theoretically, this method reduces the non-uniformity of the tension in wires to less than 2%; therefore, it is used to construct a BNG with stainless steel wire, a stainless steel template, and a printed circuit board substrate. The BNG was installed in our homebuilt ion mobility spectrometer. To confirm that the performance of the BNG meets the requirements of portable ion mobility spectrometry, signal intensity and resolution (approximately 30) were experimentally determined.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Fourier-based methods for removing mesh anomalies from angle resolved photoemission spectra
Recent improvements to spatial resolution in angle-resolved photo-emission spectroscopy (ARPES) have made it common to perform measurements with a very brief dwell time, for the purpose of mapping the spectral function over large surface regions. However, rapid measurement modalities can suffer a grid-like intensity modulation due to a wire mesh that is typically placed in front of the ARPES detector to block stray electrons. Here, we explore Fourier-based methods that can effectively remove this artifact, and improve the quality of ARPES images obtained in rapid scanning modes. In conclusion, an open source software package is provided containing implementations of demonstrated algorithms.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Optical configuration optimization and calibration for the POINT system on EAST
Calibration of the polarimeter system is one of the key elements to determine the overall measurement accuracy. The anisotropic reflection and transmission properties of the mesh beam splitters can easily distort the polarization state of the circularly polarized beams. Using a rotating crystal quartz λ/2-waveplate to replace the plasma can effectively allow us to obtain the ratio of the measured Faraday rotation angle to the known rotation angle of the waveplate. This ratio is used to estimate the calibration factor for each chord to be accurately determined and help to minimize distortions introduced by the wire-mesh beam splitters. With the novel configuration optimization, the distortion of polarization state is effectively eliminated.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Design and production of the high voltage electrode grids and electron extraction region for the LZ dual-phase xenon time projection chamber
The dual-phase xenon time projection chamber (TPC) is a powerful tool for direct-detection experiments searching for WIMP dark matter, other dark matter models, and neutrinoless double-beta decay. Successful operation of such a TPC is critically dependent on the ability to hold high electric fields in the bulk liquid, across the liquid surface, and in the gas. Careful design and construction of the electrodes used to establish these fields is therefore required. We present the design and production of the LUX-ZEPLIN (LZ) experiment's high-voltage electrodes, a set of four woven mesh wire grids. Grid design drivers are discussed, with emphasis placed on design of the electron extraction region. Here, we follow this with a description of the grid production process and a discussion of steps taken to validate the LZ grids prior to integration into the TPC.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
An unattended device for high-voltage sampling and passive measurement of thoron decay products
An integrating measurement device for the concentration of airborne thoron decay products was designed and calibrated. It is suitable for unattended use over up to several months also in inhabited dwellings. The device consists of a hemispheric capacitor with a wire mesh as the outer electrode on ground potential and the sampling substrates as the inner electrode on +7.0 kV. Negatively charged and neutral thoron decay products are accelerated to and deposited on the sampling substrates. As sampling substrates, CR39 solid-state nuclear track detectors are used in order to record the alpha decay of the sampled decay products. Nuclide discrimination is achieved by covering the detectors with aluminum foil of different thickness, which are penetrated only by alpha particles with sufficient energy. Devices of this type were calibrated against working level monitors in a thoron experimental house. The sensitivity was measured as 9.2 tracks per Bq/m{sup 3} × d of thoron decay products. The devices were used over 8 weeks in several houses built of earthen material in southern Germany, where equilibrium equivalent concentrations of 1.4–9.9 Bq/m{sup 3} of thoron decay products were measured.
54 ENVIRONMENTAL SCIENCES↗
Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures
The last 50 years has witnessed significant improvement in film cooling technologies while transpiration cooling is still not implemented in turbine airfoil cooling. Although transpiration cooling could provide higher cooling efficiency with less coolant consumption compared to film cooling, the fine pore structure and high porosity in transpiration cooling metal media always raised difficulties in conventional manufacturing. Recently, the rapid development of additive manufacturing (AM) has provided a new perspective to address such challenge. With the capability of the innovative powder bed selective laser metal sintering (SLMS) AM technology, the complex geometries of transpiration cooling part could be precisely fabricated and endued with improved mechanical strength. This study utilized the SLMS AM technology to fabricate the transpiration cooling and film cooling structures with Inconel 718 superalloy. Five different types of porous media including two perforated plates with different hole pitches, metal sphere packing, metal wire mesh, and blood vessel shaped passages for transpiration cooling were fabricated by EOS M290 system. One laidback fan-shaped film cooling coupon was also fabricated with the same printing process as the control group. Heat transfer tests under three different coolant mass flow rates and four different mainstream temperatures were conducted to evaluate the cooling performance of the printed coupons. The effects of geometry parameters including porosity, surface outlet area ratio, and internal solid–fluid interface area ratio were investigated as well. The results showed that the transpiration cooling structures generally had higher cooling effectiveness than film cooling structure. The overall average cooling effectiveness of blood vessel-shaped transpiration cooling reached 0.35, 0.5, and 0.57, respectively, with low (1.2%), medium (2.4%), and high (3.6%) coolant injection ratios. The morphological parameters analysis showed the major factor that affected the cooling effectiveness most was the internal solid–fluid interface area ratio for transpiration cooling. This study showed that additive manufactured transpiration cooling could be a promising alternative method for turbine blade cooling and worthwhile for further investigations.
Engineering↗