Search NASA⌕ Search

SEARCH · Search NASA

Results for “Warm Critical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Results of the KRUSTY Warm Critical Experiments

The Kilowatt Reactor Using Stirling TechnologY (KRUSTY) was a prototypic nuclear-powered test of a 5-kW(thermal) Kilopower space reactor. This paper presents results from the KRUSTY warm critical experiments, which were completed prior to the final system test. The first set of criticals comprised cold or zero-power criticals; i.e., the core was not heated by fission power. These were followed by three warm criticals, where fission power heated the core to 200°C, 300°C, and 450°C, respectively. These criticals provided the data, confidence, and regulatory framework that were needed to proceed with the KRUSTY nuclear system test. The criticals also provided valuable data for the benchmarking of codes applicable to all nuclear systems. Finally, a comparison of KRUSTY results to pretest predictions is provided, and overall, the models matched the experimental results very closely.

David I. Poston↗

The ice-core record - Climate sensitivity and future greenhouse warming

The prediction of future greenhouse-gas-warming depends critically on the sensitivity of earth's climate to increasing atmospheric concentrations of these gases. Data from cores drilled in polar ice sheets show a remarkable correlation between past glacial-interglacial temperature changes and the inferred atmospheric concentration of gases such as carbon dioxide and methane. These and other palaeoclimate data are used to assess the role of greenhouse gases in explaining past global climate change, and the validity of models predicting the effect of increasing concentrations of such gases in the atmosphere.

Lorius, C.↗

High-Altitude Hydration System

Three methods are being developed for keeping water from freezing during high-altitude climbs so that mountaineers can remain hydrated. Three strategies have been developed. At the time of this reporting two needed to be tested in the field and one was conceptual. The first method is Passive Thermal Control Using Aerogels. This involves mounting the fluid reservoir of the climber s canteen to an inner layer of clothing for better heat retention. For the field test, bottles were mounted to the inner fleece layer of clothing, and then aerogel insulation was placed on the outside of the bottle, and circumferentially around the drink straw. When climbers need to drink, they can pull up the insulated straw from underneath the down suit, take a sip, and then put it back into the relative warmth of the suit. For the field test, a data logger assessed the temperatures of the water reservoir, as well as near the tip of the drink straw. The second method is Passive Thermal Control with Copper-Shielded Drink Straw and Aerogels, also mounted to inner layers of clothing for better heat retention. Braided wire emanates from the inside of the fleece jacket layer, and continues up and around the drink straw in order to use body heat to keep the system-critical drink straw warm enough to keep water in the liquid state. For the field test, a data logger will be used to compare this with the above concept. The third, and still conceptual, method is Active Thermal Control with Microcontroller. If the above methods do not work, microcontrollers and tape heaters have been identified that could keep the drink straw warm even under extremely cold conditions. Power requirements are not yet determined because the thermal environment inside the down suit relative to the external environment has not been established. A data logger will be used to track both the external and internal temperatures of the suit on a summit day.

Parazynski, Scott E.↗

Arctic Cloud Response to a Perturbation in Sea Ice Concentration: The North Water Polynya

Surface and atmosphere energy exchanges play an important role in the Arctic climate system by influencing the lower atmospheric stability and humidity, sea ice melt and growth, and surface temperature. Sea ice significantly alters the character of these energy exchanges relative to ice-free ocean. The observed decline in Arctic sea ice since 1979 motivates questions related to the evolving role of surface-atmosphere coupling and potential feedbacks on the Arctic system. Due to the strong wintertime cloud warming effect, a critical question concerns the potential response of low clouds to Arctic sea ice decline. Previous approaches relied on interannual variability to investigate the cloud response to sea ice decline. However, the covariation between atmospheric conditions and sea ice makes it difficult to define an observational control when using interannual variability. To circumvent this difficulty, we exploit the recurring North Water polynya, an episodic opening in the northern Baffin Bay sea ice, as a natural laboratory to isolate the cloud response to a rapid, near-step perturbation in sea ice. Our results show that during the event, (a) low-cloud cover is 10%–33% larger over the polynya than nearby sea ice, (b) cloud liquid water content is up to 400% larger over the polynya than nearby sea ice, and (c) the surface cloud radiative effect is 18 W/sq. m larger over the polynya than nearby sea ice. Our results provide evidence that the low-cloud response during a polynya is a positive feedback lengthening the event.

Emily E. Monroe↗

A critical analysis of the modified equation technique of Warming and Hyett

The modified equation technique of Warming and Hyett (1974), which evaluates the behavior of a difference scheme by means of the coefficients of a certain modified equation, established a link between such coefficients and the multiplication factor obtained from the von Neumann analysis. It follows from this pioneering work that modified equations should be derived from the difference scheme, rather than from the original differential equation; a rigorous investigation is presently made of this link without resort to their original interpretation. Only partial validity is establishable for the case of multilevel schemes.

Chang, Sin-Chung↗

Electronic packaging for extended Mars surface missions

Extended Mars missions will require vehicles to survive a large number of extended temperature cycles. To address this issue for electronics, previous strategies have been to locate critical electronics in a "warm electronics box" where thermal management is more easily maintained. However, that strategy limits the number and location of electronics. An alternative strategy allows electronics to be remotely located on actuator and wheel arms with no heating which has the advantage of distributed control.

Mojarradi, Mohammad M.↗

Premonsoon Aerosol Characterization and Radiative Effects Over the Indo-Gangetic Plains: Implications for Regional Climate Warming

The Himalayas have a profound effect on the South Asian climate and the regional hydrological cycle, as it forms a barrier for the strong monsoon winds and serves as an elevated heat source, thus controlling the onset and distribution of precipitation during the Indian summer monsoon. Recent studies have suggested that radiative heating by absorbing aerosols, such as dust and black carbon over the Indo-Gangetic Plains (IGP) and slopes of the Himalayas, may significantly accelerate the seasonal warming of the Hindu Kush-Himalayas-Tibetan Plateau (HKHT) and influence the subsequent evolution of the summer monsoon. This paper presents a detailed characterization of aerosols over the IGP and their radiative effects during the premonsoon season (April-May-June) when dust transport constitutes the bulk of the regional aerosol loading, using ground radiometric and spaceborne observations. During the dust-laden period, there is a strong response of surface shortwave flux to aerosol absorption indicated by the diurnally averaged forcing efficiency of -70 W/sq m per unit optical depth. The simulated aerosol single-scattering albedo, constrained by surface flux and aerosol measurements, is estimated to be 0.89+/- 0.01 (at approx.550 nm) with diurnal mean surface and top-of-atmosphere forcing values ranging from -11 to -79.8 W/sq m and +1.4 to +12 W/sq m, respectively, for the premonsoon period. The model-simulated solar heating rate profile peaks in the lower troposphere with enhanced heating penetrating into the middle troposphere (5-6 km), caused by vertically extended aerosols over the IGP with peak altitude of approx.5 km as indicated by spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization observations. On a long-term climate scale, our analysis, on the basis of microwave satellite measurements of tropospheric temperatures from 1979 to 2007, indicates accelerated annual mean warming rates found over the Himalayan-Hindu Kush region (0.21 C/decade+/-0.08 C/decade) and underscores the potential role of enhanced aerosol solar absorption in the maximum warming localized over the western Himalayas (0.26 C/decade f 0.09 C/decade) that significantly exceed the entire HKHT and global warming rates. We believe the accelerated warming rates reported here are critical to both the South Asian summer monsoon and hydro-glaciological resource variability in the Himalayan-Hindu Kush snowpack and therefore to the densely populated downstream regions.

Gautam, Ritesh↗

Stratospheric warmings - Observations and theory

Winter stratospheric-warming observations and associated theories are reviewed. Major warmings occur on the average every other year and may be considered an important climatological component of the winter stratosphere. The warming results from eddy heat transport from equatorial latitudes into the polar regions. The eddies chiefly responsible for the transport are the planetary-scale waves which may attain amplitudes twice their monthly average values in the lower stratosphere prior to the warming. In the troposphere this amplitude increase is associated with the development of blocking patterns. The warming is shown to have a strong nonzonal component in the upper stratosphere, a feature not fully recognized by modelers. The critical-level theory of the sudden stratospheric warming provides a simple dynamic explanation of the event. The close connection between blocking in the troposphere and the development of the sudden warming is likely to be a result of resonance of free planetary waves in a stratospheric wind cavity.

Schoeberl, M. R.↗

Testing in Support of Fission Surface Power System Qualification

The strategy for qualifying a FSP system could have a significant programmatic impact. The US has not qualified a space fission power system since launch of the SNAP-10A in 1965. This paper explores cost-effective options for obtaining data that would be needed for flight qualification of a fission system. Qualification data could be obtained from both nuclear and non-nuclear testing. The ability to perform highly realistic nonnuclear testing has advanced significantly throughout the past four decades. Instrumented thermal simulators were developed during the 1970s and 1980s to assist in the development, operation, and assessment of terrestrial fission systems. Instrumented thermal simulators optimized for assisting in the development, operation, and assessment of modern FSP systems have been under development (and utilized) since 1998. These thermal simulators enable heat from fission to be closely mimicked (axial power profile, radial power profile, temperature, heat flux, etc.) and extensive data to be taken from the core region. For transient testing, pin power during a transient is calculated based on the reactivity feedback that would occur given measured values of test article temperature and/or dimensional changes. The reactivity feedback coefficients needed for the test are either calculated or measured using cold/warm zero-power criticals. In this way non-nuclear testing can be used to provide very realistic information related to nuclear operation. Non-nuclear testing can be used at all levels, including component, subsystem, and integrated system testing. FSP fuels and materials are typically chosen to ensure very high confidence in operation at design burnups, fluences, and temperatures. However, facilities exist (e.g. ATR, HFIR) for affordably performing in-pile fuel and materials irradiations, if such testing is desired. Ex-core materials and components (such as alternator materials, control drum drives, etc.) could be irradiated in university or DOE reactors to ensure adequate radiation resistance. Facilities also exist for performing warm and cold zero-power criticals.

Houts, Mike↗

Impact of Assimilating GOES-Derived Land Surface Variables into the PSU/NCAR MM5

Land surface processes are known to have a profound impact on the overlying atmosphere over a wide range of spatial and temporal scales. Many atmospheric numerical models include special parameterizations to improve the specification and partitioning of surface fluxes which are critical to the accurate prediction of warm season boundary layer behavior, organized mesoscale circulations, and convective precipitation. However, the added degrees of freedom resulting from the inclusion of vegetation and soil schemes require the specification of additional surface parameters such as vegetative resistances, green vegetation fraction, leaf area index, soil physical and hydraulic characteristics, and the vertical distribution of soil moisture. As satellite data have become more readily available in recent years, many investigations have attempted to use these new measurements to infer missing components of the surface energy budget. Sensitivity studies have shown land-skin temperature (LST) tendencies during the mid-morning hours are strongly sensitive to the surface moisture availability (a function of soil wetness and vegetation) and less sensitive to other parameters such as surface roughness. Based upon results from these and other studies, developed a simple technique that dynamically assimilates Geostationary Operational Environmental Satellite (GOES) derived land-surface products into the surface energy budget of a mesoscale model. The purpose of this paper is to demonstrate that assimilating the GOES satellite data has the potential to improve the representation of land surface characteristics within the model without prior knowledge of the land surface characteristics. The assimilation technique is presented in Section 2 and the numerical experiments are detailed in Section 3. Preliminary results and conclusions are presented in Sections 4 and 5, respectively.

Lapenta, William M.↗

Nonvolatile Memory Solution for Near-Term NASA Missions

Nonvolatile memory (NVM) system that could reliably function in extreme environments is one of the most critical components for many spacecrafts being developed for NASA missions to be launched in next four to seven years. NVM supports the computer system in saving and updating critical state data required for a warm restart after power cycling or in case of a power bus failure. It also provides a power independent mass storage capacity for the scientific data gathered by the instruments. In some cases the window for gathering such data is very small and occurs only once in a given mission. Commercially popular and fully developed Flash NVM technology is inappropriate for many reasons such as the limited read write cycles with slower access speeds, radiation intolerance, higher Single Event Upsets (SEU) rates, etc. It is desirable to have an NVM system based upon a robust cell technology making it immune to the SEUs and with sufficient radiation hardness. Availability of such NVM system seems to be still 5 to 10 years in the future. Meanwhile, it is possible to provide an interim hybrid solution by combining the existing rad-hard technologies. Additional information is contained in the original extended abstract.

Patel, J. U.↗

Mountain-wave drag in the stratosphere and mesosphere inferred from observed winds and a simple mountain-wave parameterization scheme

A daily analysis of mountain-wave propagation through observed, global wind, and temperature fields in January and August is presented. Winds and temperatures are obtained from the daily 18-level NMC Climate Analysis Center. Mountain-wave properties are deduced from a simple, gravity wave parameterization scheme in which the effects of topographic anisotropy (ridge orientation) are explicitly included. Planetary waves in the northern winter stratosphere are found to play an important role in modulating the magnitude and distribution of inferred mountain-wave drag in the middle atmosphere. The Aleutian anticyclone is found to effectively block mountain waves generated over western North America from reaching the mesosphere by inducing local mountain-wave-critical levels in the stratosphere. Stratospheric sudden warmings have a similar effect at all longitudes so that during months with sudden warmings the average inferred drag in the mesosphere is reduced by a factor of 4 to 5 from its normal value. Partly as a consequence of larger planetary-wave filtering in the Northern Hemisphere, inferred mountain-wave drag in the southern winter mesosphere is found to be comparable to that in the northern winter mesosphere. Almost all of the mountain wave drag exerted on the southern middle atmosphere is found to originate over the southern Andes and Antarctic Peninsula.

Bacmeister, Julio T.↗

Measurements of Ice Particles in Tropical Cirrus Anvils: Importance in Radiation Balance

Cirrus is important in the radiation balance of the global atmosphere, both at solar and thermal infrared (IR) wavelengths. In particular cirrus produced by deep convection over the oceans in the tropics may be critical in controlling processes whereby energy from warm tropical oceans is injected to different levels in the tropical atmosphere to subsequently influence not only tropical but mid latitude climate. Details of the cloud composition may differentiate between a net cooling or warming at these levels. The cloud composition may change depending on the input of nuclei from volcanic or other sources. Observations of cirrus during the FIRE-2 Project over Coffeyville, Kansas and by satellite demonstrate that cirrus, on occasion, is composed not only of larger particles with significant fall velocity (few hundred micrometers, 0.5 m/s) but much more numerous small particles, size 10-20 micrometers, with small fall velocity (cm/s), which may sometimes dominate the radiation field. This is consistent with emissivity measurements. In the thermal IR, ice absorption is strong, so that ice particles only 10 micrometers thick are opaque, at some wavelengths; on the other hand at other wavelengths and in the visible, ice is only moderately to weakly absorbing. It follows that for strongly absorbing wavelengths the average projected area of the ice particles is the important parameter, in weakly absorbing regions it is the volume (mass) of ice which is important. The shape of particles and also their internal structure may also have significant effect on their radiative properties. In order to access the role of cirrus in the radiation budget it is necessary to measure the distribution of ice particles sizes, shapes and concentrations in the regions of interest. A casual observation of any cirrus cloud shows that there is variability down to a scale of at least a few 100 m; this is confirmed by radar and lidar remote sensing. Thus aircraft measurements designed to give insight into the spatial distribution of radiation properties of ice crystals must be capable of examination of concentration, size and shape over a distance ideally of 100 m or less and to detect particles down to a size below which radiative effects are no longer significant.

Foster, Theodore↗

Physical and Optical/Radiative Characteristics of Aerosol and Cloud Particles in Tropical Cirrus: Importance in Radiation Balance

Whether cirrus clouds heat or cool the Earth-atmosphere system depends on the relative importance of the cloud shortwave albedo effect and the cloud thermal greenhouse effect. Both are determined by the distribution of ice condensate with cloud particle size. The microphysics instrument package flown aboard the NASA DC-8 in TOGA/COARE included an ice crystal replicator, a 2D Greyscale Cloud Particle Probe and a Forward Scattering Spectrometer Aerosol Probe. In combination, the electro-optical instruments permitted particle size measurements between 0.5 micrometer and 2.6 millimeter diameter. Ice crystal replicas were used to validate signals from the electrooptical instruments. Both optical and scanning electron microscopy were utilized to analyze aerosol and ice particle replicas between 0.1 micrometer and several 100 micrometer diameter. In first approximation, the combined aerosol-cloud particle spectrum in several clouds followed a power law N alpha D(sup -2.5). Thus, large cloud particles carried most of the condensate mass, while small cloud and aerosol particles determined the surface area. The mechanism of formation of small particles is growth of (hygroscopic, possibly ocean-derived) aerosol particles along the Kohler curves. The concentration of small particles is higher and less variable in space and time, and their tropospheric residence time is longer, than those of large cloud particles because of lower sedimentation velocities. Small particles shift effective cloud particle radii to sizes much smaller than the mean diameter of the cloud particles. This causes an increase in shortwave reflectivity and IR emissivity, and a decrease in transmissivity. Occasionally, the cloud reflectivity increased with altitude (decreasing temperature) stronger than did cloud emissivity, yielding enhanced radiative cooling at higher altitudes. Thus, cirrus produced by deep convection in the tropics may be critical in controlling processes whereby energy from warm tropical oceans is injected to different levels in the atmosphere to subsequently influence not only tropical but mid-latitude climate.

Pueschel, R. F.↗

Light Absorption in the Stratosphere: Trend, Soot Aerosol Concentration and Contribution by...

The light absorption coefficient, Beta(a) of the stratospheric aerosol is an important quantity that determines its radiative effects. When combined with the aerosol scattering coefficient, Beta(a) it becomes possible to evaluate the aerosol single scatter albedo, omega = Beta(s)/(Beta(s) + Beta(a)) which is essential for modeling the overall radiative effects of the stratospheric aerosol. Pollack1 determined that omega = 0.98 is a critical value that separates stratospheric cooling from warming.

Pueschel, R. F.↗

Large-scale dynamics of the stratosphere and mesosphere during the MAP/WINE campaign winter 1983 to 1984 in comparison with other winters

For the MAP/WINE winter temperature and wind measurements of rockets were combined with SSU radiances (Stratospheric Sounder Unit onboard the NOAA satellites) and stratopause heights from the Solar Mesosphere Explorer (SME) to get a retrieved data set including all available information. By means of this data set a hemispheric geopotential height, temperature and geostrophic wind fields eddy transports for wave mean flow interaction and potential vorticity for the interpretation of nonlinear wave breaking could be computed. Wave reflection at critical lines was investigated with respect of stratospheric warmings. The meridional gradient of the potential vorticity and focusing of wave activity is compared with derived data from satellite observations during other winters.

Petzoldt, K.↗

Alaska Transportation & Infrastructure - Identifying Permafrost Subsidence Using NASA Earth Observations to Pinpoint Road & Infrastructure Vulnerability in Fairbanks, Alaska

A rapidly warming Arctic has compromised the structural integrity of critical infrastructure through accelerated permafrost thaw and thermokarst development underlying these areas. Infrastructure, including roads, bridges, and airports across the state of Alaska are particularly at risk, as permafrost underlies ~85% of the state. However, monitoring the impacts of permafrost thaw on infrastructure is largely limited to in situ observations and frequently identified after the damage is evident. In order to assist transportation and infrastructure decision-makers in Alaska, this project identified and quantified areas of surface subsidence near critical infrastructure. Seasonal interferograms were created using Sentinel-1 C-band Synthetic Aperture Radar (SAR) and L-band Uninhabited Aerial Vehicle SAR (UAVSAR) data to identify areas experiencing surface deformation. Additionally, Light Detection and Ranging (LiDAR) datasets were used to validate select interferograms created between 2017 and 2019. Validation of subsidence detection across platforms was performed over a 7x8 sq. kilometer field site for 2017. UAVSAR and Sentinel-1 seasonal deformation returns produced consistent spatial deformation patterns with residual root mean squared errors of 13 and 21 millimeters, respectively. These results suggest that both UAVSAR and Sentinel-1 platforms are capable of detecting surface subsidence. The higher resolution of UAVSAR is better able to resolve localized subsidence features of less than 80 meters, but is limited by temporal resolution.In conjunction, UAVSAR and Sentinel-1 can provide complementary spatial and temporal resolutions for subsidence analysis in the absence of in situ data.

Patrick Saylor↗

Alaska Transportation & Infrastructure Identifying Permafrost Subsidence Using NASA Earth Observations to Pinpoint Road and Infrastructure Vulnerability in Fairbanks, Alaska

A rapidly warming Arctic has compromised the structural integrity of critical infrastructure through accelerated permafrost thaw and thermokarst development underlying these areas. Infrastructure, including roads, bridges, and airports across the state of Alaska are particularly at risk, as permafrost underlies ~85% of the state. However, monitoring the impacts of permafrost thaw on infrastructure is largely limited to in situ observations and frequently identified after the damage is evident. In order to assist transportation and infrastructure decision-makers in Alaska, this project identified and quantified areas of surface subsidence near critical infrastructure. Seasonal interferograms were created using Sentinel-1 C-band Synthetic Aperture Radar (SAR) and L-band Uninhabited Aerial Vehicle SAR (UAVSAR) data to identify areas experiencing surface deformation. Additionally, Light Detection and Ranging (LiDAR) datasets were used to validate select interferograms created between 2017 and 2019. Validation of subsidence detection across platforms was performed over a 7x8 sq. kilometer field site for 2017. The strongest relationship in spatial deformation is observed between Sentinel-1 and UAVSAR with a residual root mean square error of 20 mm. These results suggest that both UAVSAR and Sentinel-1 platforms are capable of detecting surface subsidence. The higher resolution of UAVSAR is better able to resolve localized subsidence features of less than 80 meters, but is limited by temporal resolution. In conjunction, UAVSAR and Sentinel-1 can provide complementary spatial and temporal resolutions for subsidence analysis in the absence of in situ data.

DEVELOP Tech Paper↗