Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Impact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Regionalized Life-Cycle Water Impacts of Microalgal-Based Biofuels in the United States

While algal biofuels have the potential to reduce the national reliance on fossil fuels, high water consumption associated with algal biomass cultivation represents a major concern potentially compromising the sustainable commercialization of this technology. This study focuses on quantifying the water footprint (WF) and water scarcity footprint (WSF) of renewable diesel derived from algal biomass and provides insights into where algal cultivation is less water-intensive than traditional ethanol and biodiesel feedstocks. Results are generated with an engineering process model developed to predict the life-cycle water consumption, considering green, blue, and gray water, of algae facilities across the United States at a high spatiotemporal resolution. The total WFs for Florida and Arizona are determined to be 13.1 and 17.6 m 3 GJ –1 , respectively. The blue WF in Arizona is shown to be 8.5 times larger than in Florida, while the green WF is 4.5 times smaller, but when combined into a total WF, there is just a 26% difference between the two locations. The analysis reveals that the total life-cycle WFs of algal renewable diesel are smaller than the optimal WFs of corn ethanol and soybean biodiesel. Algal systems benefit from higher growth rates and offer the opportunity to manage wastewater streams, therefore generating smaller green and gray WFs than those of conventional biofuels. Here, the WSF analysis identifies the Gulf Coast as the most suitable region for algal cultivation, with cultivation in the western US shown to exacerbate local water stress levels.

54 ENVIRONMENTAL SCIENCES↗

GeoVision Analysis Supporting Task Force Report: Impacts-The Employment Opportunities, Water Impacts, Emission Reductions, and Air Quality Improvements of Achieving High Penetrations of Geothermal Power in the United States

This report describes research and analysis performed in support of the U.S. Department of Energy Geothermal Technologies Office for its Geothermal Vision Study. A summary of the study is captured in DOE’s report, GeoVision: Harnessing the Heat Beneath Our Feet and included ground-breaking, detailed research on geothermal technologies. The study projects and quantifies the future electric and nonelectric deployment potentials of these geothermal technologies within a range of scenarios in addition to their impacts on U.S. jobs, the economy, and environment. Coordinated by the U.S. Department of Energy Geothermal Technologies Office, the Geothermal Vision Study development relied on collecting, modeling, and analyzing robust data sets through seven national laboratory partners that were organized into eight technical task force groups. These task forces and their respective principal leading national laboratory are listed in Table F-1. The table also provides a guide to the final research documents produced by each GeoVision task force. In most cases, these were prepared as laboratory reports, and they are referenced accordingly. Consult these external reports for detailed discussions of the topics contained within, which form the basis of the GeoVision analysis.

15 GEOTHERMAL ENERGY↗

Burned forests impact water supplies

Wildland fire impacts on surface freshwater resources have not previously been measured, nor factored into regional water management strategies. But, large wildland fires are increasing and raise concerns about fire impacts on potable water. Here we synthesize long-term records of wildland fire, climate, and river flow for 168 locations across the United States. We show that annual river flow changed in 32 locations, where more than 19% of the basin area was burned. Wildland fires enhanced annual river flow in the western regions with a warm temperate or humid continental climate. Wildland fires increased annual river flow most in the semi-arid Lower Colorado region, in spite of frequent droughts in this region. In contrast, prescribed burns in the subtropical Southeast did not significantly alter river flow. These extremely variable outcomes offer new insights into the potential role of wildfire and prescribed fire in regional water resource management, under a changing climate.

Science & Technology - Other Topics↗

Flow around a corner in the water impact problem

In this work, we study the local flow in the vicinity of a flat sector of arbitrary angle α in the water impact problem as motivated by recent experimental observations in the author's laboratory. The key question is as to why the ejecta formed during the impact at zero deadrise angle is considerably higher along a straight edge of the sector compared to that near a sharp corner α < π, e.g., if the impacting body is a rectangular plate. Resolving this question is made possible by the discovered here mathematical equivalence of the problem to electromagnetic diffraction phenomena. The main result of the present study is the revealed and quantified influence of the geometry of a flat plate corner on the fluid flow around it, which also contributes to the understanding of certain three-dimensional effects in the water impact problem and provides a generalization of the classical two-dimensional results on the impact at zero deadrise angle. The offered theoretical solution is also qualitatively supported with the help of particle image velocimetry measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Water Impacts of the Electricity Sector (Presentation)

This presentation discusses the water impacts of the electricity sector. Nationally, the electricity sector is a major end-user of water. Water issues affect power plants throughout the nation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Water impacts of U.S. biofuels: Insights from an assessment combining economic and biophysical models

Biofuels policies induce land use changes (LUC), including cropland expansion and crop switching, and this in turn alters water and soil management practices. Policies differ in the extent and type of land use changes they induce and therefore in their impact on water resources. We quantify and compare the spatially varying water impacts of biofuel crops stemming from LUC induced by two different biofuels policies by coupling a biophysical model with an economic model to simulate the economically viable mix of crops, land uses, and crop management choices under alternative policy scenarios. We assess the outputs of an economic model with a high-resolution crop-water model for major agricultural crops and potential cellulosic feedstocks in the US to analyze the impacts of three alternative policy scenarios on water balances: a counterfactual ‘no-biofuels policy’ (BAU) scenario, a volumetric mandate (Mandate) scenario, and a clean fuel-intensity standard (CFS) scenario incentivizing fuels based on their carbon intensities. While both biofuel policies incentivize more biofuels than in the counterfactual, they differ in the mix of corn ethanol and advanced biofuels from miscanthus and switchgrass (more corn ethanol in Mandate and more cellulosic biofuels in CFS). The two policies differ in their impact on irrigated acreage, irrigation demand, groundwater use and runoff. Net irrigation requirements increase 0.7% in Mandate and decrease 3.8% in CFS, but in both scenarios increases are concentrated in regions of Kansas and Nebraska that rely upon the Ogallala aquifer for irrigation water. Our study illustrates the importance of accounting for the overall LUC and shifts in agricultural production and management practices in response to policies when assessing the water impacts of biofuels.

09 BIOMASS FUELS↗

Permeation testing of thermal power plant cooling water impacts of Graphite Oxide (GO)/polymer membranes

The purpose of this project was to investigate how thermoelectric power plant cooling water impacts the energy demands, permeance, and ion rejection of GO/polymer membranes using extended permeation testing. Treatment of cooling tower blowdown water is challenging since this water contains scalants (e.g.: silica, calcium sulfate, calcium carbonate) which can precipitate on membranes, decreasing membrane efficiency and lifetime. In this collaboration with EPRI and a Southwestern US utility, the performance of GO/polymer membranes in desalinating cooling tower blowdown water from three natural-gas fueled power plants was evaluated. Results of cross-flow desalination test durations of three to four weeks demonstrated the long-term stability of the membranes. GO/polymer desalination membranes were shown to tolerate drinking-water level chlorination, which could reduce capital and operational costs. Biofouling and scale formation were minimal on the GO surface, suggesting that industry standard intensive cleaning steps could be reduced. Results also demonstrated pressure-tunable rejection which would allow treat-to-need water recycling, thus likely reducing energy costs for these membranes. Further development of biofouling and scaling resistant desalination membranes could lead to reduced cost for water treatment, potentially allowing for greater use of non-traditional water supplies for thermoelectric power plants.

Biedermann, Laura↗

Anchoring Strategies for Marine Renewable Energy at the Sandia Water Impact Facility

This report documents the formulation and preliminary analysis of potential anchoring strategies for use in future WEC testing at the Sandia Water Impact Facility given the existing 5-ton and 10-ton concrete blocks at the facility. Three anchoring strategies are created that are applicable to different mooring configurations for existing WECs of interest for testing. The three anchoring strategies have a maximum allowable load of between 24.57 kN and 281.17 kN, depending on whether the 5-ton or 10-ton blocks are used, with Strategy 3 with 10-ton blocks having the highest allowable load. The AquaHarmonics and CalWave xWave WECs can be tested up to a 1:1.5 and 1:1.15 scale, respectively, while maintaining a mooring configuration very close to the one used in ocean deployment. The requirements for the mooring lines, shackles, and triplates needed to support the three strategies are also calculated, with commercially available products specified. Finally, the padeyes connected to the existing concrete blocks are assessed and determined to be satisfactory for the loading expected with these anchoring strategies.

16 TIDAL AND WAVE POWER↗

Water Impacts of High Solar PV Electricity Penetration

This analysis provides a detailed national and regional description of the water-related impacts and constraints of high solar electricity penetration scenarios in the U.S. in 2030 and 2050. A modified version of the Regional Energy Deployment System (ReEDS) model that incorporates water resource availability and costs as a constraint in each of its 134 Balancing Area (BA) regions was utilized to explore national and regional differences in water use impacts and solar deployment locations under different solar energy cost and water availability scenarios (Macknick et al. 2015). Water resource availability and cost data are from recently completed research at Sandia National Laboratories (Tidwell et al. 2013a). Scenarios analyzed include two business-as-usual solar energy cost cases, one with and one without considering available water resources, and four solar energy cost cases that meet the SunShot cost goals (i.e., $1/watt for utility-scale PV systems), with varying levels of water availability restrictions. This analysis provides insight into the role solar energy technologies have in the broader electricity sector under scenarios of water constraints.

14 SOLAR ENERGY↗

Deep Water Impact Ensemble Data Set

Asteroids of various sizes, speeds, and compositions are zipping around the solar system with potential future Earth engagements. Most of the earth is covered in ocean and impacts would likely occur in deep ocean water. The IEEE SciVis Contest 2018 is dedicated to the visualization and analysis of simulations designed to study asteroid impacts in deep ocean water.

"asteroid impact" meteor "in situ" visualization↗

Modeling Climate-Water Impacts on Electricity Sector Capacity Expansion: Preprint

Climate change has the potential to exacerbate water availability concerns for thermal power plant cooling, which is responsible for 41% of U.S. water withdrawals. This analysis describes an initial link between climate, water, and electricity systems using the National Renewable Energy Laboratory (NREL) Regional Energy Deployment System (ReEDS) electricity system capacity expansion model. Average surface water projections from Coupled Model Intercomparison Project 3 (CMIP3) data are applied to surface water rights available to new generating capacity in ReEDS, and electric sector growth is compared with and without climate-influenced water rights. The mean climate projection has only a small impact on national or regional capacity growth and water use because most regions have sufficient unappropriated or previously retired water rights to offset climate impacts. Climate impacts are notable in southwestern states that purchase fewer water rights and obtain a greater share from wastewater and other higher-cost water resources. The electric sector climate impacts demonstrated herein establish a methodology to be later exercised with more extreme climate scenarios and a more rigorous representation of legal and physical water availability.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Quantifying Water Impacts from Thermoelectric Power Plants for US States and Counties - LCAXIX

This work was presented at the American Center for Life Cycle Assessment 2019 Conference (LCAXIX) in Tucson, AZ on September 24, 2019. Thermoelectric power is responsible for 41% of all freshwater withdrawals in the United States. Reliability for power plants responding to changes in water resource availability is a concern. A robust and efficient model to determine the water use for the power generation sector for any given year could be used to identify plants that contribute a significant amount of stress on the local water supply. The National Energy Technology Laboratory (NETL) has a model that analyzes EIA 860 and 923 water use data for thermoelectric power plants. NETL and Argonne National Lab (ANL) collaborated to integrate this enhanced dataset into the AWARE-US (Available Water Remaining for the contiguous US) model to find regional water stress impacts.

Carlson, Derrick R.↗

Toward Validation of Toxicological Interpretation of Diffusive Gradients in Thin Films in Marine Waters Impacted by Copper

Determination of Mytilus galloprovincialis larvae median effect concentration (EC50), of Cu in coastal marine waters by diffusive gradient in thin-films (DGT), has been shown to effectively reduce the need to consider dissolved organic carbon (DOC) concentration and quality. West coast marine and estuarine organisms’ chronic toxicity test protocol was used to validate previously modelled protective effects, afforded to highly sensitive marine larvae by ligand competition, in five diverse site waters. The results demonstrate significant narrowing of toxicological endpoints, where EC50s ranged from 3.74 – 6.67 µg/L as CDGT Cu versus 8.76 – 26.8 µg/L as CuDISS over a DOC range of 0.74 – 3.11 mg/L. Additionally, DOC quality (characterized by fluorescence excitation and emission matrices) indicates that the heterogeneity of competing Cu binding ligands, in common marine waters, minimizes the need for class determinations toward explaining the degree of protection, when assumptions in criterion maximum concentration (CMC) setting are conservative. A CDGT Cu EC50 of 3.7 µg/L, and corresponding CMC CDGT Cu of 1.8 µg/L, for universal application by regulatory compliance-monitoring programs, are proposed as a superior approach toward both integration of dynamic water quality over effective exposure periods and quantification of biologically-relevant trace Cu speciation and are demonstrated by in situ data.

Diffusive Gradients in Thin-films, copper, seawate↗

Climate-Water Impacts on Interconnection-Scale Electricity System Planning

A growing literature emphasizes the importance of integrating climate change impacts into electricity system planning. Rising average temperatures can increase and shift electricity demand while reducing generator and transmission efficiency. Changes to water availability and quality can reduce the output of thermally cooled generators and hydropower. Electric power grids across the US and globally are undergoing transformational changes that present new opportunities and challenges to reliability assurance. However, electric utilities and system operators have limited internal capabilities to incorporate these effects into planning practices. This work addresses gaps in utility and system planner practices by integrating climate-water-electricity expertise from universities and U.S. Department of Energy National Laboratories with electricity system planners and stakeholders in the Western Electricity Coordinating Council (WECC). Using a highly collaborative approach, global climate model data, high-resolution hydrology models, and long-term electric sector capacity expansion tools are employed to analyze a range of climate outcomes for future electricity scenarios aligned with recent WECC planning studies. Doing so allows WECC to expand its climate-agnostic planning assessments to consider how future temperature and precipitation patterns could influence generation and transmission planning. We explore how changes to climate-water conditions can affect power plant investment and operation, system economics, and environmental impacts, providing an expanded perspective on interconnection-wide decision making under climate uncertainty.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Laboratory-size three-dimensional x-ray microscope with Wolter type I mirror optics and an electron-impact water window x-ray source

We constructed a laboratory-size three-dimensional water window x-ray microscope that combines wide-field transmission x-ray microscopy with tomographic reconstruction techniques, and observed bio-medical samples to evaluate its applicability to life science research fields. It consists of a condenser and an objective grazing incidence Wolter type I mirror, an electron-impact type oxygen Kα x-ray source, and a back-illuminated CCD for x-ray imaging. A spatial resolution limit of around 1.0 line pairs per micrometer was obtained for two-dimensional transmission images, and 1-μm scale three-dimensional fine structures were resolved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗