Photo-electrochemical Effect in the Amorphous Cobalt Oxide Water Oxidation Catalyst Cobalt–Phosphate (CoPi)
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “Water oxidation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electrochemical Corrosion and Catalysis Dynamics of Tin Oxide during Water Oxidation
Metal oxide corrosion severely limits anodic electrocatalysis, particularly at high potentials in acidic environments, where degradation pathways remain poorly defined. This study establishes explicit connections between corrosion and electrocatalysis on tin oxide during water oxidation by examining the roles of lattice defects, reactive oxygen species, interfacial pH variations, and speciation of corroded tin in acid. We first demonstrate the presence of structural defects such as oxygen vacancies and substoichiometric Sn(II) species by integrating electron paramagnetic resonance spectroscopy, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis. Kohn–Sham density functional theory calculations reveal that explicit water structures thermodynamically stabilize reaction intermediates and lower reaction overpotentials. Moreover, we propose that water dissociation leads to hydrogen-bonding networks formed by H* and OH* intermediates, which may span the entire catalyst surface and decrease the interfacial pH to drive corrosion. In contrast, the electrochemical generation of reactive oxygen species is shown to play a minor role in catalyst corrosion during water oxidation using inductively coupled plasma mass spectrometry coupled with selective chemical scavengers. Square-wave voltammetry combined with rotating ring-disk electrodes is used to reveal that under open-circuit conditions, only Sn(IV) cations chemically dissolve from tin oxide, while both Sn(IV) and Sn(II) species electrochemically corrode during water oxidation. Our results unveil a dynamic and complicated interplay between corrosive and catalytic pathways on metal oxide electrocatalysts: a decrease in interfacial pH due to water oxidation exacerbates Sn(II)/Sn(IV) corrosion. Subsequently, the electrochemical corrosion of Sn(II)/Sn(IV) facilitates product formation from lattice oxygen, while the redeposition of corroded Sn(II) as Sn(IV) can enable oxygen exchange with water. By elucidating the roles of defects and interfacial chemistry, this work provides a roadmap for engineering improved electrocatalysts that balance activity and stability, a critical step toward scalable and durable energy technologies.
36 MATERIALS SCIENCE↗
Effect of Electrolyte Ions on Iridium Oxide-Based Water Oxidation Catalysis
The oxygen evolution reaction often limits the efficiency of renewable fuel syntheses due to its sluggish reaction kinetics. Of the factors that have been studied to improve this important reaction is how the choice of the electrolyte may alter the reaction kinetics. Despite its importance, sys-tematic studies of this effect have been relatively rare. Herein, we report an effort toward correcting this deficiency by investigating the effect of nitrate on water oxidation catalyzed by IrO x . The results show that nitrate can suppress the reaction, resulting in a decrease of the rate and an increase in the Tafel slope. The effect was found to be consistent with a microkinetic model incorporating competitive adsorption between reac-tion intermediates and nitrate, suggesting that the reaction mechanism was unaffected by anion identity. Moreover, this blocking effect exhibited dependence on the cations, following a trend Li + ≈ Na + ≈ K + > Cs + > TEA + . The results are expected to find broad applications in electrocatalysis.
Tafel slope analysis↗
Reconstruction of Thiospinel to Active Sites and Spin Channels for Water Oxidation
Water electrolysis is a promising technique for carbon neutral hydrogen production. A great challenge remains at developing robust and low-cost anode catalysts. Many pre-catalysts are found to undergo surface reconstruction to give high intrinsic activity in the oxygen evolution reaction (OER). The reconstructed oxyhydroxides on the surface are active species and most of them outperform directly synthesized oxyhydroxides. The reason for the high intrinsic activity remains to be explored. Here, a study is reported to showcase the unique reconstruction behaviors of a pre-catalyst, thiospinel CoFe 2 S 4 , and its reconstruction chemistry for a high OER activity. The reconstruction of CoFe 2 S 4 gives a mixture with both Fe–S component and active oxyhydroxide (Co(Fe)O x H y ) because Co is more inclined to reconstruct as oxyhydroxide, while the Fe is more stable in Fe–S component in a major form of Fe 3 S 4 . The interface spin channel is demonstrated in the reconstructed CoFe 2 S 4 , which optimizes the energetics of OER steps on Co(Fe)O x H y species and facilitates the spin sensitive electron transfer to reduce the kinetic barrier of O–O coupling. The advantage is also demonstrated in a membrane electrode assembly (MEA) electrolyzer. Finally, this work introduces the feasibility of engineering the reconstruction chemistry of the precatalyst for high performance and durable MEA electrolyzers.
36 MATERIALS SCIENCE↗
Ultrathin alumina passivation for improved photoelectrochemical water oxidation catalysis of tin oxide sensitized by a phosphonate-functionalized perylene diimide first without, and then with, CoOy
Previously, a photoanode composed of nanostructured SnO 2 coated with the perylene diimide dye N,N'-bis(phosphonomethyl)-3,4,9,10-perylenediimide (PMPDI) plus photoelectrochemically deposited cobalt oxide (CoO y ) was shown to photoelectrochemically oxidize water at 31 ± 7% faradaic efficiency. A non-ideal part of that prior system is that the addition of the known CoO y water oxidation catalyst (WOC) resulted in a reduction of the total photocurrent rather than the anticipated increase, due to an increase in charge-carrier recombination. Herein, we show deposition of an ultrathin alumina overlayer applied by atomic layer deposition (ALD) on the SnO 2 /PMPDI photoanode can improve the photoactivity and catalytic activity of the system; the addition a ca. 1 nm-thick AlO x layer deposited on a 4000 nm (i.e., 4 micron) thick mesoporous anode system can and does have a positive, 2.5-fold improvement in the steady-state photocurrent with 29 ± 9% faradaic efficiency vs. the control anode without alumina passivation by reducing charge-carrier recombination. Moreover, ALD-deposited AlO x layer does help support the understanding of the “anti-catalysis” of co-depositing a CoO y WOC on the SnO 2 /PMPDI DS-PECs—specifically the picture of direct CoO y –SnO 2 contact-mediated recombination—but that AlO x layer was unable to improve the photocurrent in a net SnO 2 /PMPDI/AlO x (/CoO y ) system. We attribute the lack of a performance enhancement by CoOy WOC to incomplete coverage of each SnO 2 nanoparticle by the AlO x . Overall, we find the addition of an optimized ultrathin AlOx layer (0.6 nm thick; deposited at 85 °C) improves the SnO 2 /PMPDI/AlO x system's photoactivity by a factor of up to ca. 3-fold with reduced recombination. These results document that metal-oxide passivation by low-temperature ALD can be an effective strategy for improving the water oxidation performance of even nanostructured dye sensitized-photoelectrochemical cell.
36 MATERIALS SCIENCE↗
Comparative Techno-Economic and Life Cycle Analysis of Water Oxidation and Hydrogen Oxidation at the Anode in a CO 2 Electrolysis to Ethylene System
We compare the economic viability of employing hydrogen oxidation versus water oxidation at the anode of a commercial-scale electrolysis plant that converts CO 2 to ethylene. We vary the electrolyzer capital cost, membrane lifetime, and renewable electricity price to represent a current and future market scenario. We find that anodic hydrogen oxidation with membraneless reactor design can reduce the electrolyzer capital cost by up to 48% and reduce electricity demand by at least 50% with the current underdeveloped electrolyzer market. These capital and operating cost savings could further lead to a lower ethylene production cost from anodic hydrogen oxidation than the anodic water oxidation system with hydrogen supplied at less than $\$6$ kg. In the future scenario with a fully developed electrolyzer market and cheap renewable electricity, we find that the anodic hydrogen oxidation system requires hydrogen cheaper than $0.7/kg to compete with the anodic water oxidation system. Moreover, hydrogen oxidation at the anode enables extremely low cradle-to-gate emission ethylene by utilizing negative emission hydrogen such as biomass gasification with carbon capture and sequestration, ~240% lower than ethylene produced from the wind/solar electricity-driven water oxidation system. Furthermore, this low carbon footprint ethylene can further boost the economic competitiveness for anodic hydrogen oxidation with a future carbon credit market.
54 ENVIRONMENTAL SCIENCES↗
Reorganization Energies for Interfacial Proton-Coupled Electron Transfer to a Water Oxidation Catalyst
The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled electron transfer (PCET) from a conductive metal oxide (In 2 O 3 :Sn, ITO) to a surface-bound water oxidation catalyst were extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (k inj > 10 8 s -1 ) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, −ΔG°, to a saturating limit, k max , with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of k max for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in k max and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru–O bond length for PCET. Extending Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. Furthermore, this study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.
Catalysts Kinetic parameters↗
Spin pinning effect to reconstructed oxyhydroxide layer on ferromagnetic oxides for enhanced water oxidation
Producing hydrogen by water electrolysis suffers from the kinetic barriers in the oxygen evolution reaction (OER) that limits the overall efficiency. With spin-dependent kinetics in OER, to manipulate the spin ordering of ferromagnetic OER catalysts (e.g., by magnetization) can reduce the kinetic barrier. However, most active OER catalysts are not ferromagnetic, which makes the spin manipulation challenging. In this work, we report a strategy with spin pinning effect to make the spins in paramagnetic oxyhydroxides more aligned for higher intrinsic OER activity. The spin pinning effect is established in oxideFM/oxyhydroxide interface which is realized by a controlled surface reconstruction of ferromagnetic oxides. Under spin pinning, simple magnetization further increases the spin alignment and thus the OER activity, which validates the spin effect in rate-limiting OER step. The spin polarization in OER highly relies on oxyl radicals (O∙) created by 1 st dehydrogenation to reduce the barrier for subsequent O-O coupling.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Accessing Molecular Dimeric Ir Water Oxidation Catalysts from Coordination Precursors
Not Available
Hu, Gongfang↗
General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System
The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.
Catalysts↗
Exploring the potential of high entropy perovskite oxides as catalysts for water oxidation
Electrochemical water splitting is a promising technology to renewably generate hydrogen from water with no carbon footprint. However, the catalytic efficiency is hindered by the sluggishness of the oxygen evolution reaction (OER) at the anode. Therefore, developing earth-abundant, stable, and efficient OER catalysts is of keen interest. Recent studies have demonstrated that high entropy perovskite oxides (HEPOs) can exhibit superior OER activity and excellent electrochemical stability due to the synergistic effects of the multiple cations and the high entropy configuration effect. In this opinion paper, we point out the strengths and discuss the challenges and future prospects for HEPO-based electrocatalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation
Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.
Layers↗
High-Performance Iridium–Molybdenum Oxide Electrocatalysts for Water Oxidation in Acid: Bayesian Optimization Discovery and Experimental Testing
Ir oxides are costly and scarce catalysts for oxygen evolution reaction (OER) in acid. There has been extensive interest in developing alternatives that are either Ir-free or require smaller amounts of Ir to drive the reactions at acceptable rates. One design strategy is to identify Ir-based mixed oxides that achieve similar performance while requiring smaller amounts of Ir. The obstacle to this strategy has been a very large phase space of the Ir-based mixed metal oxides, in terms of the metals combined with Ir and the different crystallographic structures of the mixed oxides, which prevents a thorough exploration of possible materials. In this work, we developed a workflow that uses machine-learning-aided Bayesian optimization in combination with density functional theory to make the exploration of this phase space plausible. This screening identified Mo as a promising dopant for forming acid-tolerant Ir-based oxides for the OER. We synthesized and characterized the Ir–Mo mixed oxides in the form of thin-film electrocatalysts with a known surface area. We show that these mixed oxides exhibited overpotentials ~30 mV lower than a pure Ir control while maintaining 24% lower Ir dissolution rates than the Ir control. Furthermore, these findings suggest that Mo is a promising dopant and highlight the promise of machine learning to guide the experimental exploration and optimization of catalytic materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ligand Tuning in Cu(pyalk)2 Water Oxidation Electrocatalysis
Molecular copper water oxidation electrocatalysts have been extensively studied in recent years for their potential use in artificial photosynthetic systems for solar energy conversion. Although ligand modification and its ability to influence catalytic properties is a key advantage of molecular systems, there are, as yet, few examples of systematic studies of these effects. Our oxidatively resistant pyalk (2-pyridyl-2-propanoate) ligand forms a complex with copper(II) that catalyzes water oxidation and provides an attractive scaffold for systematic ligand tuning. Here, we report a series of analogous copper complexes with electron-donating (methoxy-) and -withdrawing (methoxycarbonyl-) groups at the para-position of the pyalk ligand. Trends in the pKa and redox potential align with first-principles predictions for the electron-withdrawing and electron-donating groups. While the modified complexes show good activity for water oxidation, lowered faradaic efficiency in comparison to the parent complex highlights the importance of stability considerations for catalyst tuning.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Understanding the Electronic Structure Evolution of Epitaxial LaNi1-xFexO3 Thin Films for Water Oxidation
Rare earth nickelates including LaNiO3 are promising catalysts for water electrolysis to produce oxygen gas. Recent studies report that Fe substitution for Ni can significantly enhance the oxygen evolution reaction (OER) activity of LaNiO3. However, the role of Fe in increasing activity remains ambiguous, with potential origins both structural and electronic in nature. Here, by utilizing a series of epitaxial LaNi1-xFexO3 thin films synthesized by oxygen-assisted molecular beam epitaxy, we report that Fe substitution tunes the oxidation state of Ni in LaNi1-xFexO3 and a volcano-like OER trend is observed with x = 0.375 being the most active. Spectroscopy and ab initio modeling reveal that the high-valent Fe3+? B-site cationic species strongly increases the transition metal (TM) 3d bandwidth via Ni-O-Fe bridges and enhances the TM 3d-O 2p hybridization, boosting the OER activity. Furthermore, pH-dependent electrochemical measurements suggest that the OER on LaNi1-xFexO3 involves a lattice oxygen-mediated mechanism.
LaNiO3, Fe substitution, charge transfer, lattice ↗
Mechanisms of water oxidation on heterogeneous catalyst surfaces
Water oxidation, an essential step in photosynthesis, has attracted intense research attention. Understanding the reaction pathways at the electrocatalyst/water interface is of great importance for the development of water oxidation catalysts. How the water is oxidized on the electrocatalyst surface by the positive charges is still an open question. This review summarizes current advances in studies on surface chemistry within the context of water oxidation, including the intermediates, reaction mechanisms, and their influences on the reaction kinetics. The Tafel analyses of some electrocatalysts and the rate-laws relative to charge consumption rates are also presented. Moreover, how the multiple charge transfer relies on the intermediate coverage and the accumulated charge numbers is outlined. Finally, the intermediates and rate-determining steps on some water oxidation catalysts are discussed based on density functional theories.
14 SOLAR ENERGY↗
In Situ Formation of Nano Ni?Co Oxyhydroxide Enables Water Oxidation Electrocatalysts Durable at Hig
Explore the source record for details and available documents.
Abed, Jehad↗
Covalent Triazine-Based Frameworks with Ru-tda Based Catalyst Anchored via Coordination Bond for Photoinduced Water Oxidation
Light-induced water splitting (hν-WS) for the production of hydrogen as a solar fuel is considered a promising sustainable strategy for the replacement of fossil fuels. An efficient system for hν-WS involves a photoactive material that, upon shining light, is capable of separating and transferring charges to catalysts for the hydrogen and oxygen evolution processes. Covalent triazine-based frameworks (CTFs) represent an interesting class of 2D organic light-absorbing materials that have recently emerged thanks to their tunable structural, optical and morphological properties. Typically, catalysts (Cat) are metallic nanoparticles generated in situ after photoelectroreduction of metal precursors or directly drop-casted on top of the CTF material to generate Cat-CTF assemblies. Here, in this work, the synthesis, characterization and photocatalytic performance of a novel hybrid material, Ru-CTF, is reported, based on a CTF structure featuring dangling pyridyl groups that allow the Ru-tda (tda is [2,2':6',2'“-terpyridine]-6,6'”-dicarboxylic acid) water oxidation catalyst (WOC) unit to coordinate via covalent bond. The Ru-CTF molecular hybrid material can carry out the light-induced water oxidation reaction efficiently at neutral pH, reaching values of maximum TOF of 17 h -1 and TONs in the range of 220 using sodium persulfate as a sacrificial electron acceptor.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗