Search NASA⌕ Search

SEARCH · Search NASA

Results for “Wave Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

A comparative study of three techniques for using the spectral matrix in wave analysis

Three techniques - power spectral analysis, coherency analysis, and wave analysis - for studying ULF waves in the magnetosphere are described. These techniques, while mathematically dissimilar, are all based on the assumption that, at any single frequency, a single plane wave, propagating along the normal to the plane, is present. Wave polarization parameters provided by these techniques are important in the development of models of wave generation. A comparative study of the three techniques was carried out using simulated data involving known wave and noise properties and real ULF event data from ATS 1 and 6.

Arthur, C. W.↗
NASA NTRS1995

Plane-wave analysis of solar acoustic-gravity waves: A (slightly) new approach

The plane-wave decomposition of the acoustic-gravity wave effects observed in the photosphere provides a computationally efficient technique that probes the structure of the upper convective zone and boundary. In this region, the flat sun approximation is considered as being reasonably accurate. A technique to be used for the systematic plane-wave analysis of Michelson Doppler imager data, as part of the solar oscillations investigation, is described. Estimates of sensitivity are presented, and the effects of using different planar mappings are discussed. The technique is compared with previous approaches to the three dimensional plane-wave problem.

Bogart, Richard S.↗
NASA NTRS1983

Flutter and forced response of mistuned rotors using standing wave analysis

A standing wave approach is applied to the analysis of the flutter and forced response of tuned and mistuned rotors. The traditional traveling wave cascade airforces are recast into standing wave arbitrary motion form using Pade approximants, and the resulting equations of motion are written in the matrix form. Applications for vibration modes, flutter, and forced response are discussed. It is noted that the standing wave methods may prove to be more versatile for dealing with certain applications, such as coupling flutter with forced response and dynamic shaft problems, transient impulses on the rotor, low-order engine excitation, bearing motions, and mistuning effects in rotors.

Dugundji, J.↗
NASA NTRS1983

Flutter and forced response of mistuned rotors using standing wave analysis

A standing wave approach is applied to the analysis of the flutter and forced response of tuned and mistuned rotors. The traditional traveling wave cascade airforces are recast into standing wave arbitrary motion form using Pade approximants, and the resulting equations of motion are written in the matrix form. Applications for vibration modes, flutter, and forced response are discussed. It is noted that the standing wave methods may prove to be more versatile for dealing with certain applications, such as coupling flutter with forced response and dynamic shaft problems, transient impulses on the rotor, low-order engine excitation, bearing motion, and mistuning effects in rotors.

Bundas, D. J.↗
NASA NTRS1993

Review of rigorous coupled-wave analysis and of homogeneous effective medium approximations for high spatial-frequency surface-relief gratings

A review of the rigorous coupled-wave analysis as applied to the diffraction of electro-magnetic waves by gratings is presented. The analysis is valid for any polarization, angle of incidence, and conical diffraction. Cascaded and/or multiplexed gratings as well as material anisotropy can be incorporated under the same formalism. Small period rectangular groove gratings can also be modeled using approximately equivalent uniaxial homogeneous layers (effective media). The ordinary and extraordinary refractive indices of these layers depend on the gratings filling factor, the refractive indices of the substrate and superstrate, and the ratio of the freespace wavelength to grating period. Comparisons of the homogeneous effective medium approximations with the rigorous coupled-wave analysis are presented. Antireflection designs (single-layer or multilayer) using the effective medium models are presented and compared. These ultra-short period antireflection gratings can also be used to produce soft x-rays. Comparisons of the rigorous coupled-wave analysis with experimental results on soft x-ray generation by gratings are also included.

Glytsis, Elias N.↗
NASA NTRS1988

Weak-wave analysis of shock interaction with a slipstream

A weak wave analysis of shock interaction with a slipstream is presented. The theory is compared to that for the acoustic case and to the exact nonlinear analysis. Sample calculations indicate that the weak wave theory yields a good approximation to the exact solution when the shock waves are sufficiently weak that the associated entropy increase is negligible. A qualitative discussion of the case of counterflowing streams is also included.

Barger, Raymond L.↗
NASA NTRS1990

'Wave' analysis of Venus ionospheric flux ropes

The behavior of the general field fluctuations observed by the Pioneer Venus Orbiter magnetometer in the Venusian ionosphere is approached via the application of wave-analysis techniques to their compressional amplitude, ellipticity, and polarization. The most marked change in these properties occurs within about 15 deg of the terminator; ellipticity and compressional power plummet, implying that flux ropes either drastically change in character there or are confined to the dayside hemisphere, within about 75 percent of the subsolar point. Attention is given to a heuristic model which attempts to unify dayside flux-rope and 'terminator wave' interpretations.

Luhmann, J. G.↗
NASA NTRS1991

AE Source Orientation by Plate Wave Analysis

Lead breaks (Hsu-Neilsen source) were used to generate simulated acoustic emission signals in an aluminum plate at angles of 0, 30, 60, and 90 degrees with respect to the plane of the plate. This was accomplished by breaking the lead on slots cut into the plate at the respective angles. The out-of-plane and in-plane displacement components of the resulting signals were detected by broad band transducers and digitized. Analysis of the waveforms showed them to consist of the extensional and flexural plate modes. The amplitude of both components of the two modes was dependent on the source orientation angle. This suggests that plate wave analysis may be used to determine the source orientation of acoustic emission sources.

Gorman, Michael R.↗
NASA NTRS1981

Further SEASAT SAR coastal ocean wave analysis

Analysis techniques used to exploit SEASAT synthetic aperture radar (SAR) data of gravity waves are discussed and the SEASAT SAR's ability to monitor large scale variations in gravity wave fields in both deep and shallow water is evaluated. The SAR analysis techniques investigated included motion compensation adjustments and the semicausal model for spectral analysis of SAR wave data. It was determined that spectra generated from fast Fourier transform analysis (FFT) of SAR wave data were not significantly altered when either range telerotation adjustments or azimuth focus shifts were used during processing of the SAR signal histories, indicating that SEASAT imagery of gravity waves is not significantly improved or degraded by motion compensation adjustments. Evaluation of the semicausal (SC) model using SEASAT SAR data from Rev. 974 indicates that the SC spectral estimates were not significantly better than the FFT results.

Kasischke, E. S.↗
NASA NTRS1992

A general numerical model for wave rotor analysis

Wave rotors represent one of the promising technologies for achieving very high core temperatures and pressures in future gas turbine engines. Their operation depends upon unsteady gas dynamics and as such, their analysis is quite difficult. This report describes a numerical model which has been developed to perform such an analysis. Following a brief introduction, a summary of the wave rotor concept is given. The governing equations are then presented, along with a summary of the assumptions used to obtain them. Next, the numerical integration technique is described. This is an explicit finite volume technique based on the method of Roe. The discussion then focuses on the implementation of appropriate boundary conditions. Following this, some results are presented which first compare the numerical approximation to the governing differential equations and then compare the overall model to an actual wave rotor experiment. Finally, some concluding remarks are presented concerning the limitations of the simplifying assumptions and areas where the model may be improved.

Paxson, Daniel W.↗
NASA NTRS1968

Acoustic wave analysis

The primary mechanism for generation of acoustic waves in a centrifugal pump, due to the rotor/stator interaction, is an unsteady source at the entrance of the blade row as represented by the unsteady velocity field. The amplitudes of wave generated by pressure loading on the blades and by velocity boundary condition are compared.

Jackson, E. D.↗
NASA NTRS1995

Full-Wave Analysis Of MMICs Using A Generalized Yee Algorithm

Improved method of temporal analysis of propagation of electro-magnetic waves in monolithic microwave integrated circuits (MMICs) implemented by generalized version of traditional Yee algorithm. Provides more accurate mathematical modeling for analysis and design of MMICs. Based on unstructured and otherwise irregular grids. Grids readily fitted to conductive and dielectric circuit elements having realistically complex three-dimensional shapes. Better for modeling important and geometrically complex phenomena like fringing fields.

Lansing, Faiza S.↗