Search NASA⌕ Search

SEARCH · Search NASA

Results for “Welch method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Multiple Point Dynamic Gas Density Measurements Using Molecular Rayleigh Scattering

A nonintrusive technique for measuring dynamic gas density properties is described. Molecular Rayleigh scattering is used to measure the time-history of gas density simultaneously at eight spatial locations at a 50 kHz sampling rate. The data are analyzed using the Welch method of modified periodograms to reduce measurement uncertainty. Cross-correlations, power spectral density functions, cross-spectral density functions, and coherence functions may be obtained from the data. The technique is demonstrated using low speed co-flowing jets with a heated inner jet.

Seasholtz, Richard↗
NASA NTRS1998

Transfer function analysis of dynamic cerebral autoregulation in humans

To test the hypothesis that spontaneous changes in cerebral blood flow are primarily induced by changes in arterial pressure and that cerebral autoregulation is a frequency-dependent phenomenon, we measured mean arterial pressure in the finger and mean blood flow velocity in the middle cerebral artery (VMCA) during supine rest and acute hypotension induced by thigh cuff deflation in 10 healthy subjects. Transfer function gain, phase, and coherence function between changes in arterial pressure and VMCA were estimated using the Welch method. The impulse response function, calculated as the inverse Fourier transform of this transfer function, enabled the calculation of transient changes in VMCA during acute hypotension, which was compared with the directly measured change in VMCA during thigh cuff deflation. Beat-to-beat changes in VMCA occurred simultaneously with changes in arterial pressure, and the autospectrum of VMCA showed characteristics similar to arterial pressure. Transfer gain increased substantially with increasing frequency from 0.07 to 0.20 Hz in association with a gradual decrease in phase. The coherence function was > 0.5 in the frequency range of 0.07-0.30 Hz and < 0.5 at < 0.07 Hz. Furthermore, the predicted change in VMCA was similar to the measured VMCA during thigh cuff deflation. These data suggest that spontaneous changes in VMCA that occur at the frequency range of 0.07-0.30 Hz are related strongly to changes in arterial pressure and, furthermore, that short-term regulation of cerebral blood flow in response to changes in arterial pressure can be modeled by a transfer function with the quality of a high-pass filter in the frequency range of 0.07-0.30 Hz.

NASA Discipline Cardiopulmonary↗
NASA NTRS2012

Analysis of Dynamic Data from Supersonic Retropropulsion Experiments in NASA Langley's Unitary Plan Wind Tunnel

Recent experimental supersonic retropropulsion tests were conducted at the NASA Langley Research Center Unitary Plan Wind Tunnel Test Section 2 for a range of Mach numbers from 2.4 to 4.6. A 5-inch 70-degree sphere-cone forebody model with a 10-inch cylindrical aftbody experimental model was used which is capable of multiple retrorocket configurations. These configurations include a single central nozzle on the center point of the forebody, three nozzles at the forebody half-radius, and a combination of the first two configurations with no jets being plugged. A series of measurements were achieved through various instrumentation including forebody and aftbody pressure, internal pressures and temperatures, and high speed Schlieren visualization. Specifically, several high speed pressure transducers on the forebody and in the plenum were implemented to look at unsteady flow effects. The following work focuses on analyzing frequency traits due to the unsteady flow for a range of thrust coefficients for single, tri, and quad-nozzle test cases at freestream Mach 4.6 and angle of attack ranging from -8 degrees to +20 degrees. This analysis uses Matlab s fast Fourier transform, Welch's method (modified average of a periodogram), to create a power spectral density and analyze any high speed pressure transducer frequency traits due to the unsteady flow.

Codoni, Joshua R.↗
NASA NTRS1977

Three-dimensional low Reynolds number flows with a free surface

The two-dimensional leveling problem (Degani, Gutfinger, 1976) is extended to three dimensions in the case where the flow Re number is very low and attention is paid to the free surface boundary condition with surface tension effects included. The no-slip boundary condition on the wall is observed. The numerical solution falls back on the Marker and Cell (MAC) method (Harlow and Welch, 1965) with the computation region divided into a finite number of stationary rectangular cells (or boxes in the 3-D case) and fluid flow traverses the cells (or boxes).

Degani, D.↗
NASA NTRS1976

The fast decoding of Reed-Solomon codes using fermat theoretic transforms and continued fractions

It is shown that Reed-Solomon (RS) codes can be decoded by using a fast Fourier transform algorithm over finite fields GF(F sub n) where F sub n is a Fermat prime, and continued fractions. This new transform decoding method is simpler than the standard method for RS codes. The computing time of this new decoding algorithm in software can be faster than the standard decoding method for RS codes.

Welch, L. R.↗
NASA NTRS1989

Cloud field classification based upon high spatial resolution textural features. II - Simplified vector approaches

This paper compares the results of cloud-field classification derived from two simplified vector approaches, the Sum and Difference Histogram (SADH) and the Gray Level Difference Vector (GLDV), with the results produced by the Gray Level Cooccurrence Matrix (GLCM) approach described by Welch et al. (1988). It is shown that the SADH method produces accuracies equivalent to those obtained using the GLCM method, while the GLDV method fails to resolve error clusters. Compared to the GLCM method, the SADH method leads to a 31 percent saving in run time and a 50 percent saving in storage requirements, while the GLVD approach leads to a 40 percent saving in run time and an 87 percent saving in storage requirements.

Chen, D. W.↗
NASA NTRS2023

Dynamically Rendering Rough Terrain with Minimal Memory Overhead

Rendering highly detailed terrain is a process with the potential to consume a great deal of a computer’s random access memory (RAM). In a browser-based application, this resource is limited even further, leading to the necessity to use alternative methods of rendering the large amount of data needed for high detail. This report describes one such method that places the onus of rendering on the speed of the graphics processing unit (GPU) rather than on the computer’s memory. By removing attribute buffers, which contribute greatly to memory costs, from the rendering pipeline and generating the requisite attributes on the fly using a heightmap texture instead, it is estimated that memory usage can be cut down to one-sixth that of the previous method.

Visualization↗
NASA NTRS1987

Hubble Space Telescope servicing - Experience base for a new era

An account is given of the conceptual evolution of the Hubble Space Telescope's (HST) maintenance methodology, and the belated recognition of its long-term support requirements, as well as measures conceived for the extension of this orbiting observatory's service life, and the prospective benefits derivable by comparable programs from HST experience. Attention is given to HST cost and capability tradeoffs, the maintenance concept's definition, the integrated logistic support planning instituted by the program and its failure-prediction methods, as well as the institutional support base employed.

Welch, James C.↗
NASA NTRS1978

The fast decoding of Reed-Solomon codes using Fermat theoretic transforms and continued fractions

It is shown that Reed-Solomon (RS) codes can be decoded by using a fast Fourier transform (FFT) algorithm over finite fields GF(F sub n), where F sub n is a Fermat prime, and continued fractions. This new transform decoding method is simpler than the standard method for RS codes. The computing time of this new decoding algorithm in software can be faster than the standard decoding method for RS codes.

Reed, I. S.↗
NASA NTRS1975

Plan for the uniform mapping of earth resources and environmental complexes from Skylab imagery. Assessment of natural vegetation, environmental, and crop analogs

The author has identified the following significant results. For interpreting a wide range of natural vegetation analogs, S-190A color infrared and the ERTS-1 color composite were consistently more useful than were conventional color or black and white photos. Color infrared was superior for five vegetation analogs while color was superior for only three. The errors in identification appeared to associate more with black and white single band images than with multiband color. For rice crop analogs, spectral and spatial discriminations both contribute to the usefulness of images for data collection. Tests and subjective analyses conducted in this study indicated that the spectral bands exploited in color infrared film were the most useful for agricultural crop analysis. Accuracy of crop identification on any single date of Skylab images was less than that of multidate analysis due to differences in crop calendar, cultural practices used, rice variety, planting date, planting method, water use, fertilization, disease, or mechanical problems.

Poulton, C. E.↗
NASA NTRS1988

Cartographic feature extraction with integrated SIR-B and Landsat TM images

A digital cartographic multisensor image database of excellent geometry and improved resolution was created by registering SIR-B images to a rectified Landsat TM reference image and applying intensity-hue-saturation enhancement techniques. When evaluated against geodetic control, RMSE(XY) values of approximately + or - 20 m were noted for the composite SIR-B/TM images. The completeness of cartographic features extracted from the composite images exceeded those obtained from separate SIR-B and TM image data sets by approximately 10 and 25 percent, respectively, indicating that the composite images may prove suitable for planimetric mapping at a scale of 1:100,000 or smaller. At present, the most effective method for extracting cartographic information involves digitizing features directly from the image processing display screen.

Welch, R.↗
NASA NTRS1993

The effects of cloud inhomogeneities upon radiative fluxes, and the supply of a cloud truth validation dataset

A series of cloud and sea ice retrieval algorithms are being developed in support of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Science Team objectives. These retrievals include the following: cloud fractional area, cloud optical thickness, cloud phase (water or ice), cloud particle effective radius, cloud top heights, cloud base height, cloud top temperature, cloud emissivity, cloud 3-D structure, cloud field scales of organization, sea ice fractional area, sea ice temperature, sea ice albedo, and sea surface temperature. Due to the problems of accurately retrieving cloud properties over bright surfaces, an advanced cloud classification method was developed which is based upon spectral and textural features and artificial intelligence classifiers.

Welch, Ronald M.↗
NASA NTRS1991

Infrared Thermometer

Diatek Corporation, San Diego, CA and the Jet Propulsion Lab developed the Diatek Model 7000 aural thermometer which weighs only eight ounces, and measures temperature in less than two seconds using infrared astronomy technology to measure the amount of infrared energy emitted by the eardrum (the same way temperature of stars and planets is measured). This method avoids contact with mucous membranes, virtually eliminating the possibility of cross infection, and permits temperature measurement of newborn, critically ill, or incapacitated patients. Diatek Corporation was purchased by Welch Allyn Inc. The Diatek Model 7000 is now marketed as SureTemp.

Source record↗
NASA NTRS1977

Walsh transforms and signal detection

The detection of signals using Walsh power spectral estimates is analyzed. In addition, a generalization of this method of estimation is evaluated. The conclusion is that Walsh transforms are not suitable tools for the detection of weak signals in noise.

Welch, L. R.↗
NASA NTRS1999

True Concurrent Thermal Engineering Integrating CAD Model Building with Finite Element and Finite Difference Methods

Thermal engineering has long been left out of the concurrent engineering environment dominated by CAD (computer aided design) and FEM (finite element method) software. Current tools attempt to force the thermal design process into an environment primarily created to support structural analysis, which results in inappropriate thermal models. As a result, many thermal engineers either build models "by hand" or use geometric user interfaces that are separate from and have little useful connection, if any, to CAD and FEM systems. This paper describes the development of a new thermal design environment called the Thermal Desktop. This system, while fully integrated into a neutral, low cost CAD system, and which utilizes both FEM and FD methods, does not compromise the needs of the thermal engineer. Rather, the features needed for concurrent thermal analysis are specifically addressed by combining traditional parametric surface based radiation and FD based conduction modeling with CAD and FEM methods. The use of flexible and familiar temperature solvers such as SINDA/FLUINT (Systems Improved Numerical Differencing Analyzer/Fluid Integrator) is retained.

Panczak, Tim↗
NASA NTRS2006

Key Issues for Navigation and Time Dissemination in NASA's Space Exploration Program

The renewed emphasis on robotic and human missions within NASA's space exploration program warrants a detailed consideration of how the positions of objects in space will be determined and tracked, whether they be spacecraft, human explorers, robots, surface vehicles, or science instrumentation. The Navigation Team within the NASA Space Communications Architecture Working Group (SCAWG) has addressed several key technical issues in this area and the principle findings are reported here. For navigation in the vicinity of the Moon, a variety of satellite constellations have been investigated that provide global or regional surface position determination and timely services analogous to those offered by GPS at Earth. In the vicinity of Mars, there are options for satellite constellations not available at the Moon due to the gravitational perturbations from Earth, such as two satellites in an aerostationary orbit. Alternate methods of radiometric navigation as considered, including one- and two-way signals, as well as autonomous navigation. The use of a software radio capable of receiving all available signal sources, such as GPS, pseudolites, and communication channels, is discussed. Methods of time transfer and dissemination are also considered in this paper.

Nelson, R. A.↗
NASA NTRS2023

Development of Level of Detail System and First-Person Camera for the GCAS Visualization Suite

The use of data-driven simulations has become standard practice as part of planning for future space missions. These simulations allow visualizing the data interactively to show what the data represents, as well as the importance of the data in the context of the mission. Using this visualized data can enhance users’ understanding of it and accelerate analysis efforts related to missions planned around it. Three-dimensional (3D) visualization software was developed to allow creating 3D representations of various communication systems, as well as the physical terrain of the Moon, for upcoming missions. The goal of this software development effort was to create interactive visualization capabilities in the Glenn Research Center Communication Analysis Suite (GCAS) using data exported from MATLAB® (MathWorks, Inc.) scripts. This software had the functionality to visualize the line of sight and dynamic link margins of the communication satellites orbiting the Earth and the Moon. One important addition to this was the visualization of the terrain data located within the GeoTIFF files, which were produced in an effort to understand the Moon’s terrain. Proper displacement values of this data have to be visualized to showcase where craters are located and how the shadow casting works with said craters at different points of the day, as well as analysis of possible landing sites for future lunar expeditions. The graphics library coded in JavaScript, three.js, had been previously selected for developing this visualization software. The software was revised to conform to modern standards, then further developed to convert the MATLAB® data into JavaScript 3D objects and Blender GL Transmission Format Binary file (GLB) objects, which were to be imported into the scene. In the process, a variety of other testing projects were created to be combined with this project at a later point; these included the first-person camera movements around spherical objects to portray human movement around the Moon, GeoTIFF loading methods, data transfer methods for incorporating the elevation data into the scene, and level of detail (LOD) capabilities to decrease memory usage and rendering time.

Visualization↗