Wigner energy in irradiated graphite: A first-principles study
Not Available
Mei, Zhi-Gang (ORCID:0000000242497532)↗
SEARCH · Search NASA
Results for “Wigner Energy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Integration of a Wigner effect-based energy storage system with an advanced nuclear reactor
In this work, an innovative energy storage concept based on the purposeful creation of defects in crystalline material by neutron irradiation is presented. Lattice defects are generated when heavy particles collide with the atoms in a crystal structure, i.e., if the incoming particles have enough energy, recoil atoms are displaced from their initial lattice sites. Most of the displaced atoms will eventually combine with nearby vacancies, but some of them will come to rest in non-ideal locations. The energy held by displaced atoms is called Wigner energy. Lattice defects can migrate and form clusters, and the Wigner energy can be released from these groupings if sufficient activation energy is provided. In the nuclear industry, this effect is well-known since it represented an issue for graphite-moderated reactors. This work presents the conceptual design of an engineering system that exploits this physical process to store the energy of neutrons in advanced reactor concepts. In the first part of the paper, the theoretical performance of an energy storage system based on the Wigner effect is described. Given the lattice properties and the compatibility with the harsh reactor environment, graphite was selected as the candidate material for the irradiation targets. Both experimental data and molecular dynamics simulations confirmed that this system can achieve performance comparable with state-of-the-art batteries in terms of stored energy density. In the second part of the paper, the engineering challenges of this innovative technology and the proposed solutions are described. After defining the optimal irradiation conditions, the different steps of the operation of the proposed energy system (from energy storing to energy harvesting) were defined. Finally, the integration of this concept with advanced reactor designs, i.e., a Sodium-cooled Fast Reactor and a Molten Salt-cooled Reactor, was investigated and the corresponding performance was evaluated.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
On the importance of np-pairs in the isovector pairing model
Abstract It is shown that the isovector np-pair number operator can be realized in the O (5) quasi-spin basis. The computation of the isovector np-pair number is demonstrated for even-even and odd-odd ds -shell nuclei described by the charge-independent mean field plus isovector pairing model restricted within the O (5) seniority-zero subspace, thereby binding energies and low-lying excited states of these ds -shell nuclei are fit, along with estimates for the isovector neutron-proton pairing contributions. For reasonable neutron-proton pairing strengths the isovector np-pairing energy contribution to the total binding energy in odd-odd N = Z nuclei is systematically larger than that in the even-even nuclei. In sum, the results suggest that the isovector np-pairing mode is favored in odd-odd N = Z nuclei; and additionally, a decrease in the double binding-energy difference for odd-odd nuclei is primarily due to the symmetry and Wigner energy contributions to the binding energy.
Physics↗
Precision mass measurement of lightweight self-conjugate nucleus 80 Zr
Protons and neutrons in the atomic nucleus move in shells analogous to the electronic shell structures of atoms. The nuclear shell structure varies due to changes of the nuclear mean field with the number of neutrons N and protons Z, and these variations can be probed by measuring mass differences between nuclei. The N=Z=40 self-conjugate nucleus 80 Zr is of particular interest as its proton and neutron shell structures are expected to be very similar, and its ground state is highly deformed. Here, we provide evidence for the existence of a deformed double shell closure in 80Zr through high precision Penning trap mass measurements of 80-83 Zr. Our mass values show that 80Zr is significantly lighter, and thus more strongly bound than predicted. This can be attributed to the deformed shell closure at N=Z=40 and the large Wigner energy. A statistical Bayesian model mixing analysis employing several global nuclear mass models demonstrates difficulties with reproducing the observed mass anomaly using current theory.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Revealing hidden defects through stored energy measurements of radiation damage
With full knowledge of a material’s atomistic structure, it is possible to predict any macroscopic property of interest. In practice, this is hindered by limitations of the chosen characterization techniques. For example, electron microscopy is unable to detect the smallest and most numerous defects in irradiated materials. Instead of spatial characterization, we propose to detect and quantify defects through their excess energy. Differential scanning calorimetry of irradiated Ti measures defect densities five times greater than those determined using transmission electron microscopy. Our experiments also reveal two energetically distinct processes where the established annealing model predicts one. Molecular dynamics simulations discover the defects responsible and inform a new mechanism for the recovery of irradiation-induced defects. The combination of annealing experiments and simulations can reveal defects hidden to other characterization techniques and has the potential to uncover new mechanisms behind the evolution of defects in materials.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Understanding Material Damage and Degradation through Thermal Property Instruments
Quantifying material damage and degradation under reactor conditions enables researchers to make important predictions regarding reactor safety and efficiency. More specifically, thermal property instruments serve as a powerful tool in quantifying the evolution of thermal properties under irradiation, and hence, are necessary in qualifying fuels and materials for reactor use. In addition to providing insight into thermal properties, some instruments may provide a new means of quantifying radiation damage, a challenge in modern nuclear materials research.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Mapping charge excitations in generalized Wigner crystals
Transition metal dichalcogenide-based moiré superlattices exhibit strong electron-electron correlations, thus giving rise to strongly correlated quantum phenomena such as generalized Wigner crystal states. Evidence of Wigner crystals in transition metal dichalcogenide moire superlattices has been widely reported from various optical spectroscopy and electrical conductivity measurements, while their microscopic nature has been limited to the basic lattice structure. Theoretical studies predict that unusual quasiparticle excitations across the correlated gap between upper and lower Hubbard bands can arise due to long-range Coulomb interactions in generalized Wigner crystal states. However, the microscopic proof of such quasiparticle excitations is challenging because of the low excitation energy of the Wigner crystal. Here, in this study, we describe a scanning single-electron charging spectroscopy technique with nanometre spatial resolution and single-electron charge resolution that enables us to directly image electron and hole wavefunctions and to determine the thermodynamic gap of generalized Wigner crystal states in twisted WS 2 moiré heterostructures. High-resolution scanning single-electron charging spectroscopy combines scanning tunnelling microscopy with a monolayer graphene sensing layer, thus enabling the generation of individual electron and hole quasiparticles in generalized Wigner crystals. We show that electron and hole quasiparticles have complementary wavefunction distributions and that thermodynamic gaps of ~50 meV exist for the 1/3 and 2/3 generalized Wigner crystal states in twisted WS 2 .
36 MATERIALS SCIENCE↗
Simulation-based methodology to assess the lattice defects creation as energy storing process
In nuclear industry, damages caused to in-core structural materials by high-energy neutrons have been studied for years. Recently, the possibility of storing energy through the creation of defects in crystalline materials via heavy particle bombardment was investigated. To evaluate the potential of the Wigner effect as energy-storing process, a graphite-moderated Molten Salt Reactor was adopted as a test case. Neutronics simulations performed with OpenMC Monte Carlo code allowed estimating the amount of energy released during fission events, the fraction that is deposited in graphite, and the fraction that has the potential to cause radiation damages. Additionally, molecular dynamics simulations were then performed to study the evolution of cascades triggered by high-energy neutrons. As a major outcome, a more accurate estimate of the radiation damage with respect to the traditional approaches was obtained, and the fraction of the deposited neutron energy that can be stored through long-lived defects was quantified.
25 ENERGY STORAGE↗
Entanglement maximization in low-energy neutron-proton scattering
The entanglement properties of neutron-proton scattering are investigated using a measure that counts the number of entangled pairs produced by the action of a scattering operator on a given initial neutron-proton state. All phase shifts relevant for scattering at laboratory energies up to 350 MeV are used. Entanglement is found to depend strongly on the initial state. Entanglement is maximized in very low energy scattering if the initial spin state is | ↑ ↓ >, but not if the initial state is | ↑ ↑ > . At such energies the Hamiltonian obeys Wigner SU(4) symmetry, and an entanglement maximum is a sign of that symmetry. At higher energies the angular dependence of entanglement is strong and the entanglement is large for many scattering angles. Furthermore, the tensor force is shown to play a significant role in producing entanglement at laboratory kinetic energies greater than about 50 MeV.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Repartitioned Brillouin-Wigner perturbation theory with a size-consistent second-order correlation energy
Second-order Møller-Plesset perturbation theory (MP2) often breaks down catastrophically in small-gap systems, leaving much to be desired in its performance for myriad chemical applications such as noncovalent interactions, thermochemistry, and dative bonding in transition metal complexes. This divergence problem has reignited interest in Brillouin-Wigner perturbation theory (BWPT), which is regular at all orders but lacks size consistency and extensivity, severely limiting its application to chemistry. In this work, we propose an alternative partitioning of the Hamiltonian that leads to a regular BWPT perturbation series that, through the second order, is size-extensive, size-consistent (provided its Hartree–Fock reference is also), and orbital invariant. Here, our second-order size-consistent Brillouin-Wigner (BW-s2) approach can describe the exact dissociation limit of H 2 in a minimal basis set, regardless of the spin polarization of the reference orbitals. More broadly, we find that BW-s2 offers improvements relative to MP2 for covalent bond breaking, noncovalent interaction energies, and metal/organic reaction energies, although rivaling coupled-cluster with single and double substitutions for thermochemical properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Neutron-unbound states in 31 Ne
Background: The Island of Inversion near the N = 20 shell gap is home to nuclei with reordered single-particle energy levels compared to the spherical shell model. Studies of 31 Ne have revealed that its ground state has a halo component, characterized by a valence neutron orbiting a deformed 30 Ne core. This lightly-bound nucleus with a separation energy of only S n = 170 keV is expected to have excited states that are neutron unbound. Purpose: The purpose of this experiment was to investigate the low-lying excited states in 31 Ne that decay by the emission of a single neutron. Methods: An 89 MeV/u 33 Mg beam impinged on a segmented Be reaction target. Neutron unbound states in 31 Ne were populated via a two-proton knockout reaction. The 30 Ne fragment and associated neutron from the decay of 31 Ne were detected by the MoNA-LISA-Sweeper experimental setup at the National Superconducting Cyclotron Laboratory. Invariant mass spectroscopy was used to reconstruct the two-body decay energy ( 30 Ne + n). Results: The two-body decay energy spectrum exhibits two features: a low-lying peak at 0.30 ± 0.17 MeV and a broad enhancement at 1.50 ± 0.33 MeV, each fit with an energy-dependent asymmetric Breit-Wigner line shape representing a resonance in the continuum. Accompanying shell model calculations using the FSU interaction within NuShellX, combined with cross-section cal culations using the eikonal reaction theory, indicate that these peaks in the decay energy spectrum are caused by multiple resonant states in 31 Ne. Conclusions: In this study, excited states in 31 Ne were observed for the first time. Transitions from calculated shell model final states in 31 Ne to bound states in 30 Ne are in good agreement with the measured decay energy spectrum. Cross-section calculations for the two-proton knockout populating 31 Ne states as well as spectroscopic factors pertaining to the decay of 31 Ne into 30 Ne are used to examine the results within the context of the shell model expectations.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Thermal activation signatures of the Anderson insulator and the Wigner solid forming near ν = 1
When interactions overcome disorder, integer quantum Hall plateaus support topological phases with different bulk insulators. In the center of the ν = 1 plateau the bulk is an Anderson-type insulator, while in the flanks of the plateau the bulk is the integer quantum Hall Wigner solid. We find that the activation energy along the ν = 1 plateau exhibits a very dramatic nonmonotonic dependence on the magnetic field, a dependence that is strongly correlated with the stability regions of the two phases. Furthermore, the activation energy has an unexpected minimum at the boundary between the Anderson insulator and the Wigner solid. Our findings constrain the theory of the integer quantum Hall Wigner solid, determine its thermodynamic properties, and reveal unusual behavior at the boundary between the Anderson insulator and the Wigner solid. Published by the American Physical Society 2024
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Bilayer Wigner crystals in a transition metal dichalcogenide heterostructure
One of the first theoretically predicted manifestations of strong interactions in many-electron systems was the Wigner crystal, in which electrons crystallize into a regular lattice. The crystal can melt via either thermal or quantum fluctuations. Quantum melting of the Wigner crystal is predicted to produce exotic intermediate phases and quantum magnetism because of the intricate interplay of Coulomb interactions and kinetic energy. However, studying two-dimensional Wigner crystals in the quantum regime has often required a strong magnetic field or a moiré superlattice potential, thus limiting access to the full phase diagram of the interacting electron liquid. Here we report the observation of bilayer Wigner crystals without magnetic fields or moiré potentials in an atomically thin transition metal dichalcogenide heterostructure, which consists of two MoSe 2 monolayers separated by hexagonal boron nitride. We observe optical signatures of robust correlated insulating states at symmetric (1:1) and asymmetric (3:1, 4:1 and 7:1) electron doping of the two MoSe 2 layers at cryogenic temperatures. Here, we attribute these features to bilayer Wigner crystals composed of two interlocked commensurate triangular electron lattices, stabilized by inter-layer interaction. The Wigner crystal phases are remarkably stable, and undergo quantum and thermal melting transitions at electron densities of up to 6 × 10 12 per square centimetre and at temperatures of up to about 40 kelvin. Our results demonstrate that an atomically thin heterostructure is a highly tunable platform for realizing many-body electronic states and probing their liquid–solid and magnetic quantum phase transitions.
36 MATERIALS SCIENCE↗
Density Dependence of the Phases of the v = 1 Integer Quantum Hall Plateau in Low Disorder Electron Gases
Recent magnetotransport measurements in low-disorder electron systems confined to GaAs/AlGaAs samples reveal that the v = 1 integer quantum Hall plateau is broken into three distinct regions. These three regions are associated with two phases with different types of bulk localization: the Anderson insulator is due to random quasiparticle localization, and the integer quantum Hall Wigner solid is due to pinning of a stiff quasiparticle lattice. Universal properties of the v = 1 plateau are highlighted: the structure of the stability diagram, the nonmonotonic dependence of the activation energy on the filling factor, and the alignment of features of the activation energy with features of the stability regions of the different phases are found to be similar in three samples spanning a wide range of electron densities. Quantitative differences between the samples are also discussed, such as the dependence of the onset temperature and the activation energy of the integer quantum Hall Wigner solid on the electron density. The findings provide insights into the localization behavior along the v = 1 integer quantum Hall plateau in the low disorder regime.
Anderson insulator↗
Fermionic mean-field theory as a tool for studying spin Hamiltonians
The Jordan–Wigner transformation permits one to convert spin 1/2 operators into spinless fermion ones, or vice versa. In some cases, it transforms an interacting spin Hamiltonian into a noninteracting fermionic one, which is exactly solved at the mean-field level. Even when the resulting fermionic Hamiltonian is interacting, its mean-field solution can provide surprisingly accurate energies and correlation functions. Furthermore, Jordan–Wigner is, however, only one possible means of interconverting spin and fermionic degrees of freedom. Here, we apply several such techniques to the XXZ and J 1 –J 2 Heisenberg models, as well as to the pairing or reduced Bardeen–Cooper–Schrieffer Hamiltonian, with the aim of discovering which of these mappings is most useful in applying fermionic mean-field theory to the study of spin Hamiltonians.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Thermal and Quantum Melting Phase Diagrams for a Magnetic-Field-Induced Wigner Solid
A sufficiently large perpendicular magnetic field quenches the kinetic (Fermi) energy of an interacting two-dimensional (2D) system of fermions, making them susceptible to the formation of a Wigner solid (WS) phase in which the charged carriers organize themselves in a periodic array in order to minimize their Coulomb repulsion energy. In low-disorder 2D electron systems confined to modulation-doped GaAs heterostructures, signatures of a magnetic-field-induced WS appear at low temperatures and very small Landau level filling factors ($\textit{ν}$ ≃ 1/5). In dilute GaAs 2D hole systems, on the other hand, thanks to the larger hole effective mass and the ensuing Landau level mixing, the WS forms at relatively higher fillings ($\textit{ν}$ ≃ 1/3). Here we report our measurements of the fundamental temperature vs filling phase diagram for the 2D holes’ WS-liquid thermal melting. Moreover, via changing the 2D hole density, we also probe their Landau level mixing vs filling WS-liquid quantum melting phase diagram. In this work, we find our data to be in good agreement with the results of very recent calculations, although intriguing subtleties remain.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
The derivation of CRSS in pure Ti and Ti-Al alloys
The work focuses on the determination of the critical resolved shear stress (CRSS) in titanium (Ti) and titanium-aluminum (Ti-Al) alloys, influenced by an array of factors such as non-symmetric fault energies and minimum energy paths, dislocation core-widths, short-range order (SRO) effects which alter the local atomic environment, and tension-compression (T-C) asymmetry affected by intermittent slip motion. To address these multifaceted complexities, an advanced theory has been developed, offering an in-depth understanding of the mechanisms underlying slip behavior. The active slip systems in these materials are basal, prismatic, and pyramidal planes, with the latter involving both $\langle$a$\rangle$ and $\langle$c + a$\rangle$ dislocations. Each slip system is characterized by distinct Wigner-Seitz cell configurations for misfit energy calculations, varying partial dislocation separation distances, and unique dislocation trajectories—all critical to precise CRSS calculations. The theoretical CRSS results were validated against a comprehensive range of experimental data, demonstrating a strong agreement and underscoring the model's efficacy.
Critical stress↗
Bimetallic-Derived Catalytic Structures for CO 2 -Assisted Ethane Activation
In recent years, the simultaneous upgrading of CO 2 and ethane has emerged as a promising approach for generating valuable gaseous (CO, H 2 , and ethylene) and liquid (aromatics and C 3 oxygenates) chemicals from the greenhouse gas CO 2 and large-reserved shale gas. The key challenges for controlling product selectivity lie in the selective C-H and C-C bond cleavage of ethane with the assistance of CO 2 . Bimetallic-derived catalysts likely undergo alloying or oxygen-induced segregation under reaction conditions, thus providing diverse types of interfacial sites, e.g., metal/support (M/M'O x ) interface and metal oxide/metal (M'O x /M) inverse interface, that are beneficial for selective CO 2 -assisted ethane upgrading. The alloying extent can be initially predicted by cohesive energy and atomic radius (or Wigner-Seitz radius), while the preference for segregation to form the on-top suboxide can be approximated using the work function, electronegativity, and binding strength of adsorbed oxygen. Furthermore, bimetallic-derived catalysts are typically supported on high surface area oxides. Modifying the reducibility and acidity/basicity of the oxide supports and introducing surface defects facilitate CO 2 activation and oxygen supplies for ethane activation. Using in situ synchrotron characterization and density functional theory (DFT) calculations, we found that the electronic properties of oxygen species influence the selective cleavage of C-H/C-C bonds in ethane, with electron-deficient oxygen over the metal (or alloy) surface promoting nonselective bond scission to produce syngas and electron-enriched oxygen over the metal oxide/metal interface enhancing selective C-H scission to yield ethylene. Here, we further demonstrate that the preferred structures of the catalyst surfaces, either alloy surfaces or metal oxide/metal inverse interfaces, can be controlled through the appropriate choice of metal combinations and their atomic ratios. Through a comprehensive comparison of experimental results and DFT calculations, the selectivity of C-C/C-H bond scission is correlated with the thermodynamically favorable bimetallic-derived structures (i.e., alloy surfaces or metal oxide/metal inverse interfaces) under reaction conditions over a wide range of bimetallic catalysts. These findings not only offer structural and mechanistic insights into bimetallic-derived catalysts but also provide design principles for selective catalysts for CO 2 -assisted activation of ethane and other light alkanes. This Account concludes by discussing challenges and opportunities in designing advanced bimetallic-derived catalysts, incorporating new reaction chemistries for other products, employing precise synthesis strategies for well-defined structures with optimized site densities, and leveraging time/spatial/energy-resolved in situ spectroscopy/scattering/microscopy techniques for comprehensive structural analysis. The research methodologies established here are helpful for the investigation of dynamic alloy and interfacial structures and should inspire more efforts toward the simultaneous upgrading of CO 2 and shale gas.
03 NATURAL GAS↗