Search NASA⌕ Search

SEARCH · Search NASA

Results for “XPS measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Toward the origins of binding energy shifts and “satellites” formation during plasma-XPS measurements

In-plasma x-ray photoelectron spectroscopy (plasma-XPS) emerges as a powerful platform for real-time, in situ chemical analysis under conditions relevant to semiconductor processing and other plasma-enabled technologies. This study investigates the origins of binding energy (BE) shifts and the formation of “satellite” peaks observed during plasma-XPS measurements across conductive, dielectric, and gas-phase systems. Using a standard laboratory-based ambient pressure XPS apparatus coupled with an alternating current (AC)-driven capacitively coupled plasma source, we demonstrate that metastable surface species, such as transient Au oxides, can be detected during plasma exposure, revealing chemical states that are hardly accessible using conventional ultrahigh vacuum (UHV) XPS. In dielectric samples (e.g., undoped diamond, sapphire), we observe pressure- and plasma-type-dependent BE shifts of more than 50 eV, attributed to x-ray-induced and plasma-mediated surface charging. These shifts are mitigated at higher pressures/plasmas or in electronegative plasmas (e.g., O 2 ), the latter due to enhanced charge compensation mechanisms involving slow negative ions. For gas-phase species, AC-plasma excitation leads to spectral broadening and the emergence of “satellite” peaks with energy separations of a few electron volts, linked to oscillating local plasma potentials in the probing volume. Furthermore, these findings highlight the complex and important interplay between plasma parameters, surface charging, and local electric fields in shaping XPS spectra. Overall, plasma-XPS emerges as a critical metrological tool for probing transient surface chemistry, with implications for semiconductor processing, material synthesis, and plasma diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Addressing the sensitivity of signals from solid/liquid ambient pressure XPS (APXPS) measurement

Ambient pressure XPS has demonstrated its great potential in probing the solid/liquid interface, which is a central piece in electrocatalytic, corrosion, and energy storage systems. Additionally, despite the advantage of ambient pressure XPS being a surface sensitive characterization technique, the ability of differentiating the surface adsorbed species (~Å scale) and bulk electrolyte (~10 nm scale) in the spectrum depends on the delicate balance between bulk solution concentration (C), surface coverage (θ), bulk liquid layer thickness (L), and inelastic mean free path (λ) as a function of photon energy. By investigating a model system of gold dissolving in a bromide solution, the connection between theoretical prediction at the atomic resolution and macroscopic observable spectrum is established.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The XPS of pyridine: A combined theoretical and experimental analysis

A detailed analysis of the N(1s) and C(1s) X-Ray Photoelectron Spectroscopy (XPS) is made, where the measured XPS is compared with theoretical Sudden Approximation (SA) intensities and theoretical XPS Binding Energies (BEs). There is remarkably good agreement between the theoretical predictions and the measured XPS; in particular, the different full width at half maximum values for the C(1s) and N(1s) BEs are explained in terms of unresolved C(1s) BEs for the different C atoms in pyridine. Here, this work demonstrates that the combination of theory and XPS measurements can extract analysis of the XPS relevant to the molecular electronic structure. The theory used is based on fully relativistic self-consistent field solutions of the Dirac–Coulomb Hamiltonian, and the SA is used to determine relative XPS intensities.

Binding Energies (BEs)↗
DOE OSTI2023

Chemical significance of x-ray photoelectron spectroscopy binding energy shifts: A Perspective

The principal intent of this Perspective is to review the mechanisms that are responsible for the shifts of binding energies, ΔBE, observed in x-ray photoelectron spectroscopy (XPS) measurements and so to relate the shifts to the electronic structure and the chemical bonding in the systems studied. To achieve this goal, several theoretical considerations are necessary beyond just the calculation of XPS BEs. Though briefly discussed here, we are not primarily interested in absolute values of BE or quantitation using relative intensities. Within the molecular orbital (MO) theory framework, it is shown that the analysis of orbital properties is critical for the correct interpretation of XPS. In particular, rigorous definitions are given for the initial state and final state contributions to BEs and to BE shifts, ΔBE. It is first shown how the BEs of core levels are related to the electronic structure by consideration of the BEs for a model atomic system to establish the origins and magnitudes of BE shifts. The mechanisms established for the model system are then applied to a review of XPS measurements and MO theory on a set of real examples. An important focus of the paper is to demonstrate that, in many cases, initial state mechanisms allow for a definitive interpretation of the XPS BE shifts and that an important role of theory is to provide qualitative explanations rather than quantitative agreement with XPS measurements. The mechanisms established are a guide to the interpretation of XPS measurements and consideration of these mechanisms may suggest additional calculations that would be useful. It is concluded that there is still a bright future for the coupling of ab initio MO theory with XPS measurements.

Materials Science↗
DOE OSTI2021

Two-dimensional correlation analysis for x-ray photoelectron spectroscopy

Abstract X-ray photoelectron spectroscopy (XPS) measures the binding energy of core-level electrons, which are well-localised to specific atomic sites in a molecular system, providing valuable information on the local chemical environment. The technique relies on measuring the photoelectron spectrum upon x-ray photoionisation, and the resolution is often limited by the bandwidth of the ionising x-ray pulse. This is particularly problematic for time-resolved XPS, where the desired time resolution enforces a fundamental lower limit on the bandwidth of the x-ray source. In this work, we report a novel correlation analysis which exploits the correlation between the x-ray and photoelectron spectra to improve the resolution of XPS measurements. We show that with this correlation-based spectral-domain ghost imaging method we can achieve sub-bandwidth resolution in XPS measurements. This analysis method enables XPS for sources with large bandwidth or spectral jitter, previously considered unfeasible for XPS measurements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

The XPS of Azines: A Comparative Study

A detailed analysis is presented of the X-ray Photoelectron Spectroscopy, XPS, of thin films of three Azines: Pyrazine, Pyridine and Pyrimidine. This includes not only the binding energies of the various core ionizations but also their intensities. A major focus is to compare our theoretical predictions with our measured XPS for N(1s) and C(1s) as a basis for assigning the features and for justifying the broadening parameters that must be applied to the theoretical results. The C(1s) XPS of Pyridine and Pyrimidine are significantly broadened because of unresolved XPS for their inequivalent C atoms. The extent of the binding energy, BE, shifts and the XPS intensities for the unique C atoms, which are responsible for this broadening, are obtained from the theory. The additional broadening parameters to be applied to the theory to enable comparison with measured XPS are discussed in terms of lifetime broadening, experimental resolution, and BE shifts in different layers of the thin film. A novel feature of our analysis is that it is necessary to invoke surface core level shifts to explain and to justify the broadenings needed to apply to the theoretical results to have a complete comparison with the measured XPS. The results presented have general value for extracting chemical and physical information from XPS.

Bagus, Paul↗
DOE OSTI2021

Vapor-phase grafting of a model aminosilane compound to Al 2 O 3 , ZnO, and TiO 2 surfaces prepared by atomic layer deposition

Atomic layer deposition (ALD) is a highly versatile surface functionalization technique that can conformally coat both planar and porous substrates. Here we use ALD metal oxide layers to establish a well-defined starting surface for vapor-phase surface organic modification. Vapor-phase (3-aminopropyl)triethoxysilane (APTES) surface silanization of ALD Al 2 O 3 , ZnO and TiO 2 surfaces were studied at 100 °C, 150 °C and 200 °C. In situ quartz crystal microbalance (QCM) and Fourier-transform infrared (FTIR) spectroscopy measurements, and ex situ atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) measurements showed uniform monolayer silane formation through self-limiting APTES reaction. We observed a higher surface density of grafted APTES species following silanization at 100 °C compared to 200 °C, and we attribute this to the temperature-dependent reactivity of the surface hydroxyls and changes in the mode of APTES reaction. The FTIR and XPS measurements revealed that APTES reacts with Al 2 O 3 and ZnO exclusively through metal siloxy bond formation. However, APTES reacts with TiO 2 through both siloxy bond formation and ammonium salt formation via the amine group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Removal of Surface Carbonate from Lithium-Ion Battery Cathode Materials via Vapor-Phase Fluorination

Herein, ultrathin metal-fluoride barrier coatings on the surface of lithium-ion battery (LIB) cathodes can improve cycling stability and prevent corrosion by acidic byproducts in the electrolyte. Atomic layer deposition (ALD) is an effective method to deposit ultrathin metal fluoride coatings on LIB cathodes. Although numerous studies have demonstrated the benefit of ALD metal fluoride coatings to LIB performance, comparatively few works have examined the effect of individual ALD precursors on the cathode surface. This paper uses X-ray photoelectron spectroscopy (XPS) measurements to elucidate the surface chemical changes on LIB cathode material surfaces upon exposure to the ALD metal fluoride precursor, hydrogen fluorine pyridine (HFPy). We found a decrease in surface carbonate and an increase in surface fluoride after HFPy exposure suggesting the conversion of lithium carbonate (Li 2 CO 3 ) to lithium fluoride (LiF). This conversion is desirable given that Li 2 CO 3 degrades LIB performance, whereas LiF provides an excellent physio-chemical barrier against chemical attack during cycling. Scanning transmission electron microscopy, X-ray energy dispersive spectroscopy, and XPS measurements following HFPy exposure to Li 2 CO 3 powder revealed the formation of a conformal LiF shell around the Li 2 CO 3 particles. Finally, we confirmed the complete conversion of similar to 7 nm ALD Li 2 CO 3 films on silicon from HFPy exposure using XPS and spectroscopic ellipsometry. The elimination of problematic Li 2 CO 3 from LIB cathode surfaces and conversion into a protective LiF coating via a single precursor vapor treatment may provide a cost-effective method for enhancing LIB performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Operando XPS in reactive plasmas: The importance of the wall reactions

In this article, advancements in differential pumping and electron optics over the past few decades have enabled x-ray photoelectron spectroscopy (XPS) measurements at (near-)ambient pressures, bridging the pressure gap for characterizing realistic sample chemistries. Recently, we have demonstrated the capabilities of an ambient pressure XPS setup for in situ plasma environment measurements, allowing plasma-surface interactions to be studied in operando rather than using the traditional before-and-after analysis approach. This new “plasma-XPS” technique facilitates the identification of reaction intermediates critical for understanding plasma-assisted surface processes relevant to semiconductor nanomanufacturing, such as physical vapor deposition, etching, atomic layer deposition, and many other plasma applications. In this paper, we apply the plasma-XPS approach to monitor real-time surface chemical changes on a model Ag(111) single crystal exposed to oxidizing and reducing plasmas. We correlate surface-sensitive data with concurrent gas-phase XPS measurements and residual gas mass-spectrum analysis of species generated during plasma exposure, highlighting the significant role of plasma-induced chamber wall reactions. Ultimately, we demonstrate that plasma-XPS provides comprehensive insights into both surface and gas-phase chemistry, establishing it as a versatile and dynamic characterization tool with broad applications in microelectronics research. Finally, we outline potential enhancements and future metrology directions to advance plasma-XPS investigations further.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evolution of Metastable Phases During Mg Metal Corrosion: An In Situ Cryogenic X-ray Photoelectron Spectroscopy Study

Magnesium and its alloys are potential structural materials candidates for a wide variety of applications due to their high strength-to-weight ratio. However, ductility and poor corrosion resistance under ambient environmental conditions are the bottleneck for industrial deployment. Designing passivation layers and/or corrosion resistant alloys requires fundamental understanding of the corrosion process. The traditional ex-situ spectroscopic measurements of polycrystalline metal surface with ubiquitous surface impurities and grain boundaries only provided an indistinct view of the corrosion process. To clearly distinguish the mechanism and sequence of corrosion process, we employed in-situ cryo-based x-ray photoelectron spectroscopy (XPS) measurements on Mg single crystal surface exposed to aqueous salt solution. Clean Mg (0001) surfaces were exposed to pure D2O and NaCl aqueous solution (5 wt% NaCl+95 wt% D2O). The interfacial reactions were studied using multimodal analysis including XPS, x-ray diffraction (XRD) and scanning electron microscopy (SEM). In contrast to previous studies, our experiments demonstrated the formation of magnesium chloride hydroxide hydrate during aqueous salt corrosion processes. Evidence of metastable ClO* radicals were also found during the initial aqueous salt solution exposure.

Shutthanandan, Vaithiyalingam↗
DOE OSTI2025

Selective Adsorption of Thiol-Containing Molecules on Copper Sulfide Surfaces via Molecule–Surface Disulfide Bridges

Recent results in the fields of nanoenhanced agriculture and expanding interest in prebiotic chemistry have placed increased emphasis on understanding the chemically selective interaction of small molecules with the surfaces of metal sulfides. Here, we present an integrated experimental and computational study of the interaction of thiol-containing molecules with copper sulfide (covellite) surfaces in aqueous media. In situ Fourier-transform infrared (FTIR) measurements and ex situ X-ray photoelectron spectroscopy (XPS) measurements show that molecules bearing free thiol groups, including glutathione and cysteine, bind strongly to CuS (covellite) nanoparticles and to CuS (001) single crystals, while control studies show that similar molecules lacking the free thiol group exhibit much less binding. Additional experiments show that these thiol-containing molecules interact transiently with CuO nanoparticle surfaces but are readily removed by rinsing. The FTIR and XPS experiments demonstrate that adsorption of molecular thiols to CuS surfaces occurs in a chemically selective manner. Further experimental studies and density functional calculations show that the preferred mode of binding is through the surface S atoms, forming a Solid–S–S–Molecule disulfide linkage. While the role of disulfide linkages in controlling structure and function of proteins and other biomolecules is widely known, the formation of surface disulfide linkages as a motif for covalent molecular binding at surfaces has not been established previously.

36 MATERIALS SCIENCE↗
DOE OSTI2025

TR-XPS Realtime Analysis Tool (ArroyoXPS) v0.1

The ALS has developed a Time-Resolved X-ray Photoelectron Spectroscopy (TR-XPS) technique, which involves applying a specific pattern of voltage curves to a sample while measuring XPS peaks. This pattern is repeated over multiple cycles, and changes in the material's response provide valuable scientific insights. Traditionally, file-based analysis workflows have been used: scans are run for a predetermined time, and after one or more scans are complete, calculations are made. ArroyoXPS changes this by offering in-experiment scan and analysis, allowing researchers to gain insights before a scan is finished. This enables them to adjust experimental parameters quickly, potentially saving valuable beamtime. ArroyoXPS includes tools for integrating with beamline control systems, performing analysis, and visualizing scan data in a web browser.

McReynolds, Dylan [Lawrence Berkeley National Labo↗
DOE OSTI2021

Cesium-Induced Active Sites for C–C Coupling and Ethanol Synthesis from CO 2 Hydrogenation on Cu/ZnO(000$\bar{1}$) Surfaces

The efficient conversion of carbon dioxide, a major air pollutant, into ethanol or higher alcohols is a big challenge in heterogeneous catalysis, generating great interest in both basic scientific research and commercial applications. Here, we report the facilitated methanol synthesis and the enabled ethanol synthesis from carbon dioxide hydrogenation on a catalyst generated by codepositing Cs and Cu on a ZnO(000$\bar{1}$) substrate. A combination of catalytic testing, X-ray photoelectron spectroscopy (XPS) measurements, and calculations based on density functional theory (DFT) and kinetic Monte Carlo (KMC) simulation was used. The results of XPS showed a clear change in the reaction mechanism when going from Cs/Cu(111) to a Cs/Cu/ZnO(000$\bar{1}$) catalyst. The Cs-promoting effect on C–C coupling is a result of a synergy among Cs, Cu, and ZnO components that leads to the presence of CH x and CH y O species on the surface. Furthermore, according to the DFT-based KMC simulations, the deposition of Cs introduces multifunctional sites with a unique structure at the Cu–Cs–ZnO interface, particularly being able to promote the interaction with CO 2 and thus the methanol synthesis predominantly via the formate pathway. More importantly, it tunes the CHO binding strongly enough to facilitate the HCOOH decomposition to CHO via the formate pathway, but weakly enough to allow further hydrogenation to methanol. The fine-tuning of CHO binding also enables a close alignment of a CHO pair to facilitate the C–C coupling and eventually ethanol synthesis. Our study opens new possibilities to allow the highly active and selective conversion of carbon dioxide to higher alcohols on widely used and low-cost Cu-based catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multimode Characterization Approach for Understanding Cell-Level PV Performance and Degradation

Cell-level degradation processes impact the economic viability and large-scale deployment prospects for both established and emerging photovoltaic (PV) technologies. This project addresses the need to develop experimental and device-modeling approaches for studying cell-level degradation processes in photovoltaic (PV) devices using a variety of characterization techniques that provide access to complementary material and device properties. Our results demonstrate that by coupling characterization results with device modeling it is possible to develop comprehensive understanding of processes leading to performance limitations and degradation. This project developed a suite of novel measurement techniques including pulsed-light-bias operando X-ray and photoelectron spectroscopy (popXPS), light-biased scanning microwave impedance microscopy (sMIM), and near-field transport imaging (TI). In addition, operando characterization methodologies and in situ stressing capabilities have been developed and applied for techniques including electron-beam-induced current (EBIC), cathodoluminescence (CL), and Kelvin probe force microscopy (KPFM). Device-physics models were developed and applied to simulate correlative, multi-mode measurements to extract material and device parameters that control performance degradation. These characterization and modeling techniques were applied in a multi-mode approach to probe cell-level degradation mechanisms in Cd(Se,Te) and hybrid perovskite PV devices. Together these efforts contribute to foundational PV degradation science by establishing a framework for understanding PV performance degradation at the cell level and benefit the U.S. PV industry by providing resources in the form of novel experimental capabilities, knowledge gained, and available expertise that can accelerate research and development of improved PV device materials and architectures. The project provided a comprehensive understanding of degradation in baseline Cd(Se,Te) solar cells provided by our collaborators at Colorado State University (CSU). EBIC and CL-based measurements and revealed unusual collection and recombination profiles in these devices, which underwent significant changes with during stressing. KPFM and operando XPS measurements showed that device stressing permanently alters energy-band alignments at the (Mg,Zn)O/Cd(Se,Te) interface, which in turn account for an observed loss in fill factor. Studies on hybrid perovskite devices were hampered to a significant extent by delays related to the pandemic. Nevertheless, a set of hybrid perovskite devices (supplied through an NREL-industry partnership) were stress tested and characterized with techniques including EBIC, sMIM, popXPS/popUPS and optically excited TI. Available results from these measurements informed the device modeling effort and suggest that defects and related band offsets at the C60/LiF/hybrid perovskite interface are the primary source of degradation in these devices.

14 SOLAR ENERGY↗
DOE OSTI2021

Single Nanoflake Photoelectrochemistry Reveals Intrananoflake Doping Heterogeneity That Explains Ensemble-Level Photoelectrochemical Behavior

Transition metal dichalcogenide (TMD) nanoflake thin films are attractive electrode materials for photoelectrochemical (PEC) solar energy conversion and sensing applications, but their photocurrent quantum yields are generally lower than those of bulk TMD electrodes. The poor PEC performance has been primarily attributed to enhanced charge carrier recombination at exposed defect and edge sites introduced by the exfoliation process. Here, a single nanoflake PEC approach reveals how an alternative effect, doping heterogeneity, limits ensemble-level PEC performance. Photocurrent mapping and local photocurrent–potential (i–E) measurements of MoS 2 nanoflakes exfoliated from naturally occurring bulk crystals revealed the presence of n- and p-type domains within the same nanoflake. Interestingly, the n- and p-type domains in the natural MoS 2 nanoflakes were equally efficient for iodide oxidation and tri-iodide reduction (IQE values exceed 80%). At the single domain-level, the natural MoS 2 nanoflakes were nearly as efficient as nanoflakes exfoliated from synthetic n-type MoS 2 crystals. Single domain-level i–E measurements explain why natural MoS 2 nanoflakes exhibit an n-type to p-type photocurrent switching effect in ensemble-level measurements: the n- and p-type diode currents from individual domains oppose each other upon illuminating the entire nanoflake, resulting in zero photocurrent at the switching potential. Furthermore, the doping heterogeneity effect is likely due to nonideal stoichiometry, where p-type domains are S-rich according to XPS measurements. Although this doping heterogeneity effect limits photoanode or photocathode performance, these findings open the possibility to synthesize efficient TMD nanoflake photocatalysts with well-defined lateral p- and n-type domains for enhanced charge separation.

14 SOLAR ENERGY↗
DOE OSTI2022

Anodic Interfacial Evolution in Extremely Fast Charged Lithium-Ion Batteries

Interfacial reaction mechanisms at the anode/separator interface play a central role in the performance and safety of lithium-ion batteries during fast charging. We report a mechanistic study on the evolution and interactions of the aging mechanisms at the anode/separator interface in lithium cobalt oxide/graphite pouch cells charged with variable charging rates (1–6C) over 10 cycles. In situ electrochemical measurements, including voltage relaxation, Coulombic efficiency, and direct current internal resistance, indicated an incremental lithium loss until the C rates were ≤5C. A substantial capacity fade is observed in the first few cycles of fast charging, but the magnitude of capacity fade progressively diminishes with the number of cycles, indicating a suppression in the lithium deposition mechanism. Post-mortem film thickness, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) analyses were performed to elucidate the evolution of electrolyte decomposition, the solid–electrolyte interface (SEI), lithium plating, and film fracture mechanisms with C rate. XPS measurements confirmed an increasing lithium concentration in an SEI film with an increase in the C rate. SEM images showed a growth of dendritic lithium on the anode surface from 1C to 3C. Precrack formation leading to an interfacial film fracture was observed at higher C rates. Furthermore, a differential analysis of the discharge capacity indicated a possible two-phase delithiation from the anode and reduced cathodic lithiation due to lithium loss at high C rates.

36 MATERIALS SCIENCE↗