Search NASA⌕ Search

SEARCH · Search NASA

Results for “YTTRIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparative study of three yttrium organometallic compounds for the stabilization of the cubic phase in YSZ deposited by PE-CVD

In this work, the efficiencies of three organometallic yttrium precursors used to produce YSZ coatings by plasma-enhanced chemical vapor deposition were studied. Yttrium (III) acetylacetonate, Y (acac) 3 , yttrium (III) hexafluoroacetylacetonate, Y (acacF 6 ) 3 , and yttrium (III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate), Y (tmhd) 3 , were used to stabilize the cubic phase in zirconia deposited at temperatures from 500 to 800 °C. Our results showed that at temperatures between 500 and 600 °C, Y (tmhd) 3 appeared to be the most efficient dopant as it introduced the highest concentration of yttria (1–2.7 mol%) with only 6.4–5.6 at.% carbon. However, at 700 and 800 °C, Y (acac) 3 introduced twice as much yttria (8–15 mol%) as Y (tmhd) 3 with almost the same amount of carbon (5.4–3 at.%). Conversely, Y (acacF6)3 was the least efficient as it maintained a low concentration of yttria of around 0.7–1.8 mol% with 3.6–8.2 at.% carbon for all the deposition temperatures. Among these precursors, only Y (acac) 3 surpassed 8 mol% yttria and achieved a fully stabilized cubic phase at 800 °C, with the remaining samples stabilizing only the tetragonal phase. The tetragonal phase was stabilized due to the formation of crystallites of around 10 nm. The observed difference in the efficiency of the three precursors was correlated to important differences in their decomposition behavior as observed by mass spectrometry and thermogravimetry/differential scanning calorimetry.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Transmission EBSD (t-EBSD) as Tool to Investigate Nanostructures in Superconductors

The transmission electron backscatter diffraction (t-EBSD) technique has proven to be an indispensable tool for the analysis of microstructures of superconducting samples, both high-T{sub c} samples (YBa{sub 2}Cu{sub 3}O{sub y}, Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8}) as well as MgB{sub 2} or iron-based materials. The knowledge of the grain boundary properties (misorientation, length, width) is essential for the further optimization of sample performance. Any addition of secondary phase(s) to improve the flux pinning properties is required to be of nanometer dimensions, so the higher achievable resolution and the better imaging properties are important to obtain reasonably high image quality to enable automated orientation mapping. The orientation maps reveal not only the location and the shape of the inclusions within the superconducting matrix or at the grain boundaries but also their influence on the surrounding superconducting matrix, which also plays an important role in flux pinning. In the case of sintered MgB{sub 2} bulk samples, the demand for higher critical current densities leads to MgB{sub 2} grains in the 100-nm range, which is already difficult to be studied by means of conventional EBSD. Furthermore, t-EBSD is useful for the analysis of specific microstructures of unconventional superconductors like superconducting foams or superconducting nanowire networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Preparation and Characterization of YBa 2 Cu 4 O 8 Superconductor

Solid-state reaction of appropriate amounts of Y 2 O 3 , BaCOs, and CuO for 2 h at 800°C in flowing oxygen with a total pressure of 2.7 x 10 2 Pa (2 mm Hg), followed by cooling and annealing at 750°C for 10 h in oxygen at ambient pressure, has produced orthorhombic YBa 2 Cu 4 O 8 (124) as the main phase with YBa 2 Cu 3 O x (123) as an impurity phase. After the as-calcined powder was annealed in oxygen at 800°C for 24 h under ambient pressure, the phase purity improved considerably. Calcined 124 powder was pressed into pellets and rapidly annealed at temperatures from 870°C to 935°C. At these temperatures, the 124 decomposed into 123. The superconducting transition temperature, T c , of the annealed samples depended upon the annealing temperature and atmosphere. The decomposed samples have been characterized by low field RF SQUID magnetometer and high resolution transmission electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

AC Magnetic Susceptibility of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Substituted by Nd{sup 3+} and Ca{sup 2+} Ions

Effect of Nd{sup 3+} and Ca{sup 2+} ion substitutions in Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} (Y-358) was studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), electrical resistivity, and ac magnetic susceptibility measurements. Superconducting samples of type Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} (with 0 ≤ x, y ≤ 0.4) were synthesized by the standard solid-state reaction technique. XRD patterns revealed that all the samples were mainly composed of Y-358 phase with orthorhombic structure. SEM micrographs showed that Nd{sup 3+} and Ca{sup 2+} ion substitutions had the ability to alter the grain morphology of Y-358 to irregular randomly oriented grains with smaller average grain sizes. The temperature-dependent electrical resistivity curves indicated that the superconducting transition temperature T{sub c} was decreased from 96.51 to 87.41 K as the substitution contents were increased from 0 to 0.4. Detailed AC magnetic susceptibility measurements were done using a quantum design physical property measurement system (PPMS) at different dc fields (B = 0.5–20 kG) and frequency of 1 kHz. A comparison between electrical resistivity and AC magnetic susceptibility data was performed. It was found that T{sub cs} obtained from AC magnetic susceptibility were much lower than those obtained from the resistivity measurements, for all studied samples. This was discussed in terms of filamentary paths that could produce sharp pronounced drops in diamagnetism. Generally, the depression in T{sub c} was attributed to the decrease in relative volume fraction of Y-358 or due to trapping of mobile holes or other mechanism connected with oxygen vacancy disorder. Werthamer–Helfand–Hohenberg (WHH) theory was employed to study the temperature dependence of the upper critical magnetic field B{sub c2}(T) for the samples. The relative importance of both orbital and paramagnetic effects in the suppression of superconductivity was described with the aid of Maki parameter (κ{sub M}). The estimated values of the upper critical magnetic field at 0 K, B{sub c2}(0), were found to decrease from 37.3 to 13.5 T as Nd{sup 3+} and Ca{sup 2+} contents were increased from 0 to 0.4. This decrement was attributed to the weak electron–phonon coupling and to the orbital as well as spin pair breaking mechanisms. Furthermore, Ginzburg–Landau coherence length ξ{sub GL} of Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} was found to increase with the increase of the Nd{sup 3+} and Ca{sup 2+} contents. Therefore, Nd{sup 3+} and Ca{sup 2+} ions play an important role in the pair-breaking mechanism and in suppressing superconductivity of the Y-358 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Structure and Magnetic Properties of the Ti-Doped Pyrochlore Molybdate Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7}

The structural, heat capacity, and magnetic properties of Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} were investigated in this work. Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} maintains the pyrochlore structure, but lattice constants are observed to decrease continuously with the Ti{sup 4+} doping. The magnetic measurements indicate a magnetic phase transition at low temperature for all Ti-doped samples, and the Ti{sup 4+} doping suppresses the transition temperature. This is ascribed to the diluted effect of nonmagnetic Ti{sup 4+} substitution of magnetic Mo{sup 4+}. The heat capacity data confirm that the low-temperature magnetic phase is spin glass in the Ti{sup 4+}-doped Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} system. The M(H) data reveals the coexistence of antiferromagnetic and ferromagnetic interactions at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Simulation of femtosecond interferometry when studying the effect of intense laser irradiation of a transparent medium

A method for comparing experimental and simulation results obtained when transmitting a femtosecond laser pulse through a material is proposed. This method is based on computer reproduction of photographs recorded using femtosecond interferometry. A numerical analysis of the spatial and temporal evolution of an intense (∼10{sup 13} W cm{sup −2}) pulse propagating in the bulk of yttrium aluminium garnet is presented. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Controlling the Properties of Spin–Wave Transport in a Semiring Magnon Microwavevguide

Spin-wave transport along a waveguide structure with disturbed translational symmetry has been investigated. A semiring portion of a magnon microwaveguide has been made of a YIG film. It has been shown that one can control the dynamic magnetization spatial distribution by varying the magnetic biasing angle in the microwaveguide plane. Under such conditions, the transmission coefficient of standing waves changes noticeably. The structure suggested in this paper allows the rotation of spin-wave signals in an irregular configuration under the conditions of surface magnetostatic wave propagation. This effect may be used in planar magnon networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1984

Method of forming a relatively stable slip of silicon metal particles and yttrium containing particles

The method concerns forming a relatively stable slip of silicon metal particles and yttrium containing particles. In one embodiment, a casting slip of silicon metal particles is formed in water. Particles of a yttrium containing sintering aid are added to the casting slip. The yttrium containing sintering aid is a compound which has at least some solubility in water to form Y.sup.+3 ions which have a high potential for totally flocculating the silicon metal particles into a semiporous solid. A small amount of a fluoride salt is added to the casting slip which contains the yttrium containing sintering aid. The fluoride salt is one which will produce fluoride anions when dissolved in water. The small amount of the fluoride anions produced are effective to suppress the flocculation of the silicon metal particles by the Y.sup.+3 ions so that all particles remain in suspension in the casting slip and the casting slip has both an increased shelf life and can be used to cast articles having a relatively thick cross-section. The pH of the casting slip is maintained in a range from 7.5 to 9. Preferably, the fluoride salt used is one which is based on a monovalent cation such as sodium or ammonia. The steps of adding the yttrium containing sintering aid and the fluoride salt may be interchanged if desired, and the salt may be added to a solution containing the sintering aid prior to addition of the silicon metal particles.

Dickie, Ray A.↗
NASA NTRS1990

Synthesis of Y1Ba2Cu3O(sub x) superconducting powders by intermediate phase reaction

One of the more striking problems for the synthesis of the Y1Ba2Cu3Ox compound is the high-temperature decomposition of the BaCO3. This compound is present as raw material or as an intermediate compound in chemical processes such as amorphous citrate, coprecipitation oxalate, sol-gel process, acetate pyrolisis, etc. This fact makes difficult the total formation reaction of the Y1Ba2Cu3Ox phase and leads to the presence of undesirable phases such as the BaCuO2 phase, the 'green phase', Y2BaCuO5 and others. Here, a new procedure to overcome this difficulty is studied. The barium cation is previously combined with yttrium and/or copper to form intermediate compounds which can react between them to give Y1Ba2Cu3Ox. BaY2O4 and BaCu2O3 react according to the equation BaY2O4+3BaCu2O3 yields 2Y1Ba2Cu3Ox. BaY2O4 is a stable compound of the Y2O3-BaO system; BaCu2O3 is an intimate mixture of BaCuO2 and uncombined CuO. The reaction kinetics of these phases have been established between 860 and 920 C. The phase evolution has been determined. The crystal structure of the Y1Ba2Cu3Ox obtained powder was studied. According to the results obtained from the kinetics study the Y1Ba2Cu3Ox the synthesis was performed at temperatures of 910 to 920 C for short treatment times (1 to 2 hours). Pure Y1Ba2Cu3Ox was prepared, which develops orthorombic type I structure despite of the cooling cycle. Superconducting transition took place at 91 K. The sintering behavior and the superconducting properties of sintered samples were studied. Density, microstructure and electrical conductivity were measured. Sintering densities higher than 95 percent D(sub th) were attained at temperatures below 940 C. Relatively fine grained microstructure was observed, and little or no-liquid phase was detected.

Moore, C.↗
DOE OSTI2019

Magnetic Interactions on Oxide Ferromagnet/Ferromagnetic Intermetallide Interface

The magnetic properties of heterostructures consisting of two films are studied. The upper layer involves rare-earth intermetallic nanostructured superlattices consisting of exchange-coupled layers (TbCo{sub 2}/FeCo){sub n} (TCFC), and the lower layer includes either epitaxial manganite La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) with optimum strontium doping or an epitaxial film of an yttrium–iron garnet Y{sub 3}Fe{sub 5}O{sub 12} (YIG) with a Bi additive. TCFC is a ferromagnet having high Curie temperature and provides controllable induced magnetic anisotropy. Experimental studies showed that the interlayer interaction of the TCFC/LSMO heterostructure is antiferromagnetic. There was an increase in the FMR line width in the structures due to the flow of a spin current through the interface between two films. There was electric voltage in the TCFC/YIG heterostructure induced in the TCFC intermetallide film, due to an inverse spin Hall effect under ferromagnetic resonance conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Superconductivity up to 243 K in the yttrium-hydrogen system under high pressure

The discovery of superconducting H 3 S with a critical temperature T c ~200 K opened a door to room temperature superconductivity and stimulated further extensive studies of hydrogen-rich compounds stabilized by high pressure. Here, we report a comprehensive study of the yttrium-hydrogen system with the highest predicted T c s among binary compounds and discuss the contradictions between different theoretical calculations and experimental data. We synthesized yttrium hydrides with the compositions of YH 3 , YH 4 , YH 6 and YH 9 in a diamond anvil cell and studied their crystal structures, electrical and magnetic transport properties, and isotopic effects. We found superconductivity in the Im-3m YH 6 and P6 3 /mmc YH 9 phases with maximal T c s of ~220 K at 183 GPa and ~243 K at 201 GPa, respectively. Fm-3m YH 10 with the highest predicted T c > 300 K was not observed in our experiments, and instead, YH 9 was found to be the hydrogen-richest yttrium hydride in the studied pressure and temperature range up to record 410 GPa and 2250 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

Method of reducing the green density of a slip cast article

The method disclosed in this specification is one of reducing the green density of an article cast in a slip casting operation. The article is cast from a casting slip containing silicon metal particles, yttrium containing particles, and a small amount of a fluoride salt which is effective to suppress flocculation of the silicon metal particles by y.sup.+3 ions derived from the yttrium containing particles. The method is characterized by the following step. A small amount of compound which produces a cation which will partly flocculate the particles of silicon metal is added to the casting slip. The small amount of this compound is added so that when the casting slip is slip cast into a casting mold, the partly flocculated particles of silicon will interrupt an otherwise orderly packing of the particles of silicon and particles of yttrium. In this manner, the green density of the slip cast article is reduced and the article may be more easily nitrided.

Mangels, John A.↗
DOE OSTI2025

Investigation of High-Temperature Compatibility of Select Oxides with Yttrium Hydride for Micro and Space Reactor Applications

Yttrium hydride is a promising material for a high-temperature neutron moderator in advanced micro and space reactors due to its high hydrogen density and relative thermal stability compared to other metal hydrides. However, yttrium hydride desorbs hydrogen rapidly at temperatures above 800°C, which is below the operational temperature range of some reactor designs. A hydrogen barrier coating of oxide on the hydride surface may inhibit hydrogen loss at 800°C and beyond, but the high-temperature compatibility between yttrium hydride and many oxides is currently unknown. The high-temperature compatibility of Al 2 O 3 , MgO, and Y 2 O 3 with YH 1.92 was examined by subjecting mixed oxide–hydride pellets to a 1200°C heat treatment then using a combination of diffractometry, microscopy, and spectroscopy to determine changes in the pellet composition as a result. Yttrium scavenged oxygen from both Al 2 O 3 and MgO to form Y 2 O 3 , resulting in significant loss of YH 1.92 . Yttrium reacted with reduced aluminum to form YAl 2 and several other compounds. Reduced magnesium volatilized above 1091°C and vacated the pellet. Only Y 2 O 3 did not appreciably react with YH 1.92 . Of the three oxides tested, only Y 2 O 3 was compatible with YH 1.92 at 1200°C based on the experimental criteria.

compatibility↗
DOE OSTI2024

Comprehensive Synthesis and Structural Trends in Tetramethyl Diglycolamide (TMDGA) Nitrate Complexes with Lanthanides and Americium

Complexes of N,N,N',N'-tetramethyl diglycolamide (TMDGA), a hydrophilic diglycolamide (DGA) proposed as an aqueous phase holdback reagent, have been crystallized for the majority of the lanthanide series (excluding promethium), yttrium, and americium to deepen our structural understanding of trivalent metal ion (M 3+ ) DGA coordination compounds in the presence of nitrate counter-anions. The presented collection of 16 complexes with accompanying single-crystal structures, taking formulas [M(TMDGA) 3 ][M(NO 3 ) 6 ] (M = La, Ce, Pr, Nd, Sm, Am), [M(TMDGA) 3 ][M(NO 3 ) 5 (H 2 O)] 1–x [M(NO 3 ) 4 (H 2 O) 2 ] x (NO 3 ) 1+x (M = Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb), [M(TMDGA) 3 ] 2 [M(NO 3 ) 4 (H 2 O) 2 ] 0.75 [M(NO 3 ) 5 (H 2 O)] 1.25 (NO 3 ) 2.75 ·H 2 O (M = Lu), and [M(TMDGA) 3 ][M(NO 3 ) 5 (H 2 O)](NO 3 )·CH 3 OH (M = Y) were all synthesized via solvent diffusion of reaction mixtures containing the metal nitrate M(NO 3 ) 3 ·nH 2 O and TMDGA. Single-crystal X-ray diffraction analyses of these new structures show that each TMDGA complex comprises of three TMDGA ligands coordinating the metal ion via carbonyl and etheric oxygen atoms forming [M(TMDGA) 3 ] 3+ cations. Spectroscopy measurements under high pressure displayed notable differences in the f → f transition shifting between that of Nd(III) and Am(III). Shifting of transitions by 2.0 nm were observed in Nd up to 8.50 ± 0.09 GPa, while Am saw shifting between 11.0 to 13.5 nm at pressures up to 20.06 ± 1.90 GPa. The local geometry in these complexes is a distorted spherical capped square antiprism (CSAPR-9) except for of the yttrium complex, which exhibits a distorted spherical tricapped trigonal prismatic (TCTPR-9) geometry. Further, the anions that form concomitantly with the TMDGA complexes are composed of hexanitrato species for the early lanthanide ions (lanthanum to samarium); whereas the remaining smaller lanthanides did not possess sufficiently large ionic radii to coordinate six bidentate nitrate anions, instead, one or two nitrate anions are situated in the outer sphere. The systematic progression of changes in the anionic environments of these complexes outlines the changing coordination habits afforded by the lanthanide contraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Diverse high-pressure chemistry in Y-NH 3 BH 3 and Y–paraffin oil systems

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors—ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y 3 H 11 , Y 2 H 9 , Y 4 H 23 , Y 13 H 75 , and Y 4 H 25 . The study also uncovered a carbide (YC 2 ) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Structural, Morphological, Electrical and Magnetic Properties of Yttrium-Substituted Co-Zn Ferrites Synthesized by Double Sintering Technique

A series of rare earth Y{sup 3+} ion substituted Co-Zn ferrites Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) have been synthesized by conventional double sintering technique from the oxide powders of Co, Zn, Fe, and Y. The XRD, FESEM, EDS, DC resistivity, dielectric measurements, VSM, and Curie temperature (T{sub c}) analysis have been used to investigate structural, morphological, electrical, and magnetic properties. Single phase of cubic spinel structure has been confirmed up to x < 0.06, and a small amount of secondary phase YFeO{sub 3} has also been detected for x > 0.06. The lattice parameter initially decreases than increases with yttrium concentrations. The FESEM image shows that the grains and grain boundaries are distinct and uniformly distributed and the purity has also been endorsed from the EDS spectra. The average grain size decreases at x = 0.02 and then increases with Y substitution. The long range mobility of charge carriers and presence of localized charge carriers with retreat from the Debye-like behavior in the compositions have been explored using electric modulus and impedance. The magnetic strength diminishes owing to existence of magnetic dilution in the A-B interactions subsequent to the T{sub c} declines with the x contents. The value of saturation magnetization decreases with increasing Y{sup 3+} contents that indicates that the domain wall motion become tougher due to substitution of foreign ions Y{sup 3+} that possess larger ionic radius. Therefore, the Y{sup 3+} substituted Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) ferrites with high resistivity and low losses has implications to be used in high frequency and power supply devices applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Electrodeposition of Magnonic V(tetracyanoethylene) 2 Thin Films

Molecule-based magnetic materials have been identified as promising candidates for application in magnonic technologies, owing not only to their solution processability but also because they can exhibit narrow ferromagnetic resonance (FMR) linewidths and low Gilbert damping coefficients—crucial prerequisites for the transmission of coherent magnons over macroscopic distances. In particular, V(TCNE) 2 , a compound with a threedimensional network structure composed of vanadium(II) centers linked by tetracyanoethylene (TCNE •− ) radical anions, displays magnonic properties comparable to yttrium iron garnet, the quintessential magnonic material in the field. However, existing solution and chemical vapor deposition methods for synthesizing V(TCNE) 2 require the use of highly reactive zero-valent molecular vanadium precursors, stymying research on this important material. Herein, we report a facile electrochemical method for the deposition of thin films of V(TCNE) 2 using readily obtainable and stable divalent vanadium precursors and TCNE •− anions generated by electrochemical reduction. Magnetization measurements reveal that the films exhibit ferrimagnetic ordering above room temperature, consistent with V(TCNE) 2 films synthesized via other methods. Moreover, the electrodeposited films exhibit narrow FMR linewidths as low as 17.5 G and a low Gilbert damping coefficient of 1.1 × 10 −3 , values that are on par with some currently integrated metallic magnonic materials. More generally, these results demonstrate that electrodeposition can provide a straightforward means of generating highperformance magnonic materials using readily available molecular precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Bonding similarities and differences between Y–Sb–Te and Sc–Sb–Te phase-change memory materials

The scandium (Sc) – alloyed Sb 2 Te 3 phase-change alloy has recently been found to enable ultrafast crystal nucleation due to the formation of Sc-stabilized octahedral motifs in the amorphous phase, rendering cache-type phase-change memory feasible. When yttrium (Y) is added, however, non-octahedral bonding patterns form in the amorphous Sb 2 Te 3 -based network even though Y has a valence electron configuration similar to that of Sc and also forms perfect octahedral bonding environments with tellurium in the YTe crystal. Here we elucidate the origin of this difference between Sc and Y, by carrying out thorough ab initio simulations and orbital-based bonding analyses on amorphous Y–Sb–Te and Sc–Sb–Te compounds. We also demonstrate how the smooth overlap of atomic positions (SOAP) similarity kernel can be used to quantify the structural similarity of local motifs in the amorphous phase with respect to various crystalline yttrium and scandium tellurides, both in the nearest-neighbor shell and beyond. We discover that the bonding contrast of Y- and Sc-centered structural motifs in amorphous Sb 2 Te 3 stems from their parent crystals at high Te concentrations. The larger atomic radius of Y and the weaker charge transfer when bonded with Te is found to allow more Te neighbors and cause a more open bonding environment, leading to higher coordination numbers and non-octahedral environments. We discuss the implications of the different local environments for practical applications in memory devices.

36 MATERIALS SCIENCE↗