SEARCH · Search NASA

Results for “ZERO VELOCITY CURVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS2015

End of Life Disposal for Three Libration Point Missions through Manipulation of the Jacobi Constant and Zero Velocity Curves

The aim of this investigation is to determine the feasibility of mission disposal by inserting the spacecraft into a heliocentric orbit along the unstable manifold and then manipulating the Jacobi constant to prevent the spacecraft from returning to the Earth-Moon system. This investigation focuses around L1 orbits representative of ACE, WIND, and SOHO. It will model the impulsive delta-V necessary to close the zero velocity curves after escape through the L1 gateway in the circular restricted three body model and also include full ephemeris force models and higher fidelity finite maneuver models for the three spacecraft.

Wind↗

NASA NTRS2015

End of Life Disposal for Three Libration Point Missions through Manipulation of the Jacobi Constant and Zero Velocity Curves

Flight Dynamics Facility (FDF) located at NASA Goddard Space Flight Center (GSFC) provides the flight dynamics expertise for three Sun-Earth Moon L1 missions. Advanced Composition Explorer (ACE) launched August 1997 Solar and Heliospheric Observatory (SOHO) launched December 1995 Global Geospace Science WIND satellite launched November 1994 entered Lagrange point orbit in 2004.

Ace↗

NASA NTRS1962

THE RESTRICTED THREE BODY PROBLEM. I. THE SURFACES OF ZERO VELOCITY IN REGULARIZED COORDINATES. 2. THE EULER PROBLEM BY GRAPHICAL ANALYSIS

Three body problem zero velocity curves - euler two center problem by graphical analysis - guidance systems

EULER EQUATION↗

NASA NTRS2013

Lyapunov Orbits in the Jupiter System Using Electrodynamic Tethers

Various researchers have proposed the use of electrodynamic tethers for power generation and capture from interplanetary transfers. The effect of tether forces on periodic orbits in Jupiter-satellite systems are investigated. A perturbation force is added to the restricted three-body problem model and a series of simplifications allows development of a conservative system that retains the Jacobi integral. Expressions are developed to find modified locations of equilibrium positions. Modified families of Lyapunov orbits are generated as functions of tether size and Jacobi integral. Zero velocity curves and stability analyses are used to evaluate the dynamical properties of tether-modified orbits.

Cassini↗

NASA NTRS1967

Theory of Orbits.

Book on theory of orbits covering restricted problem of three bodies, two bodies in rotating coordinate system and periodic orbits

LIBRATIONAL MOTION↗

NASA NTRS1996

A Study of the Development of Steady and Periodic Unsteady Turbulent Wakes Through Curved Channels at Positive, Zero, and Negative Streamwise Pressure Gradients, Part 1

The turbomachinery wake flow development is largely influenced by streamline curvature and streamwise pressure gradient. The objective of this investigation is to study the development of the wake under the influence of streamline curvature and streamwise pressure gradient. The experimental investigation is carried out in two phases. The first phase involves the study of the wake behind a stationary circular cylinder (steady wake) in curved channels at positive, zero, and negative streamwise pressure gradients. The mean velocity and Reynolds stress components are measured using a X-hot-film probe. The measured quantities obtained in probe coordinates are transformed to a curvilinear coordinate system along the wake centerline and are presented in similarity coordinates. The results of the steady wakes suggest strong asymmetry in velocity and Reynolds stress components. However, the velocity defect profiles in similarity coordinates are almost symmetrical and follow the same distribution as the zero pressure gradient straight wake. The results of Reynolds stress distributions show higher values on the inner side of the wake than the outer side. Other quantities, including the decay of maximum velocity defect, growth of wake width, and wake integral parameters, are also presented for the three different pressure gradient cases of steady wake. The decay rate of velocity defect is fastest for the negative streamwise pressure gradient case and slowest for the positive pressure gradient case. Conversely, the growth of the wake width is fastest for the positive streamwise pressure gradient case and slowest for the negative streamwise pressure gradient. The second phase studies the development of periodic unsteady wakes generated by the circular cylinders of the rotating wake generator in a curved channel at zero streamwise pressure gradient. Instantaneous velocity components of the periodic unsteady wakes, measured with a stationary X-hot-film probe, are analyzed by the phase averaging techniques. The temporal distribution of velocity and Reynolds stress components obtained in a stationary frame of reference are transformed to a spatial distribution in a relative frame of reference. Profiles of phase-averaged velocity and Reynolds stress distributions in the relative frame of reference and similarity coordinates are presented. The velocity defect and Reynolds stress distributions agree with the results of the wake development behind a stationary cylinder in the curved channel at zero streamwise pressure gradient. The phase-averaged third-order correlations, presented in the relative frame of reference and similarity coordinates, show pronounced asymmetric features.

Schobeiri, M. T.↗

NASA NTRS1987

Analysis of photopole data reduction models

An analysis of the total impulse obtained from a buried explosive charge can be calculated from displacement versus time points taken from successive film frames of high speed motion pictures of the explosive event. The indicator of that motion is a pole and baseplate (photopole), which is placed on or within the soil overburden. Here, researchers are concerned with the precision of the impulse calculation and ways to improve that precision. Also examined here is the effect of each initial condition on the curve fitting process. It is shown that the zero initial velocity criteria should not be applied due to the linear acceleration versus time character of the cubic power series. The applicability of the new method to photopole data records whose early time motions are obscured is illustrated.

Cheek, James B.↗

NASA NTRS1983

A new calibration of the extragalactic distance scale using Cepheids and RR Lyrae stars

Visual absolute magnitudes of classical Cepheids, metal-poor RR Lyrae stars and short-period type II Cepheids have been determined with very high precision by combining a large number of old and new astrophysical data. Five independent methods (four observational and one theoretical) have been successfully used: (1) secular and statistical parallaxes; (2) moving-group parallaxes; (3) cluster main-sequence fitting; (4) the Baade-Wesselink method and its modifications; and (5) light-curve and velocity-curve fitting (the theoretical method). With these five adopted methods, the zero point of the galactic and extragalactic distance scale can be set on a relatively firm and self-consistent basis. Classical Cepheids and RR Lyrae stars now provide essentially identical distances to nearby galaxies: the distance modulus to the Large Magellanic Cloud is 18.5 and to the Small Magellanic Cloud is 18.8, both with an uncertainty of 0.1. The distance to the center of our Galaxy is 8.6 plus or minus 0.5 kiloparsecs. The major uncertainty in these values lies in the correction for interstellar extinction.

Stothers, R. B.↗

NASA NTRS1983

Prediction of structures and magnetic orientations in solid alpha and beta-O2

A quasi-harmonic-lattice-dynamics method coupled with a pattern-recognition optimization scheme is used to determine the minimum energy structures and magnetic orientations of solid oxygen. It is shown that the magnetic interaction is responsible for the stability of alpha-O2 with respect to beta-O2 at zero temperature and pressure. The calculated alpha-O2 lattice parameters, magnetic orientations, and sublimation energy are in good agreement with experiment. Phonon dispersion curves are calculated at vector k not equal to zero and the acoustic sound velocities are determined. The rms translational and orientational fluctuations from equilibrium are also calculated. The beta-O2 phase is described by constraining the magnetic moments so that the magnetic Hamiltonian preserves the hexagonal symmetry of the crystal. The calculated lattice parameters are in good agreement with the experiments, and a three-sublattice, quasi-helical magnetic orientation is predicted from structural and energetic considerations.

Etters, R. D.↗

NASA NTRS1992

Wall functions for the kappa-epsilon turbulence model in generalized nonorthogonal curvilinear coordinates

A k-epsilon turbulence model suitable for compressible flow, including the new wall function formulation, has been incorporated into an existing compressible Reynolds-averaged Navier-Stokes code, F3D. The low Reynolds number k-epsilon model of Chien (1982) was added for comparison with the present method. A number of features were added to the F3D code including improved far-field boundary conditions and viscous terms in the streamwise direction. A series of computations of increasing complexity was run to test the effectiveness of the new formulation. Flow over a flat plate was computed by using both orthogonal and nonorthogonal grids, and the friction coefficients and velocity profiles compared with a semi-empirical equation. Flow over a body of revolution at zero angle of attack was then computed to test the method's ability to handle flow over a curved surface. Friction coefficients and velocity profiles were compared to test data. All models gave good results on a relatively fine grid, but only the wall function formulation was effective with coarser grids. Finally, in order to demonstrate the method's ability to handle complex flow fields, separated flow over a prolate spheroid at angle of attack was computed, and results were compared to test data. The results were also compared to a k-epsilon model by Kim and Patel (1991), in which one equation model patched in at the wall was employed. Both models gave reasonable solutions, but improvement is required for accurate prediction of friction coefficients in the separated regions.

Sondak, D. L.↗

NASA NTRSDate not supplied

Simulation of Fluid Flow and Collection Efficiency at Low Stokes Number

Numerical simulations of fluid flow and collection efficiency for a Science Engineering Associates (SEA) Robust probe are presented. The cases cover a range of freestream velocity from 10-135 m/s, and particle sizes from 1-200 µm. This combination produces results for Stokes numbers in the range of 0.07-1092. A blended modified Stokes (defined in the paper) is introduced which covers a range of 0.07-146. Of particular interest is the collection efficiency of the sensing element (a forward-facing half-pipe), Etot, in the low Stokes number regime. It was observed that the collection efficiency of the sensing area approached one for large Stokes numbers (>100) as expected. As blended modified Stokes number approached one, the Etot dropped to approximately 0.5. By blended modified Stokes numbers of 0.3, the Etot has dropped to essentially zero. Plotting collection versus blended modified Stokes number, the different freestream velocities collapsed quite well on to a single curve. The paper presents a discussion on the flowfield and local collection efficiency, beta, in an effort to explain the predictions. Of particular interest is what is essentially a shadow zone in plain sight. As the Stokes number is reduced, the local beta along the centerline of the half-pipe goes to zero. This occurs at Stokes numbers where the overall collection, Etot, is still appreciable. An empirical relation was developed to allow for corrected collection values at low Stokes numbers. The correlation remains within 2% for blended modified Stokes numbers above 1, and within 6% for all cases.

Instrumentation↗

NASA NTRSDate not supplied

Simulation of Fluid Flow and Collection Efficiency at Low Stokes Number

Instrumentation↗

NASA NTRS1985

Observational studies of the symbiotic stars. III High-dispersion IUE and H-alpha observations of EG Andromedae

High-dispersion IUE and optical spectra are presented for the symbiotic star EG Andromedae (HD 4174). Remarkable emission-line strength and profile variations are confirmed for the S IV, O IV, C IV, and He II ultraviolet lines as well as H-alpha. Accurate cross-correlation absorption-line velocities determined from Ti I, Ca I, and Fe I features convincingly demonstrate that EG And is a single-lined spectroscopic binary. The velocity curve suggests that the photometric ephemeris reported by Smith in 1980 should be revised by a redefinition of zero phase by about 0.08 of a period. The primary of the system may be similar to the central star of a planetary nebula embedded in a dense nebula with a mild stellar wind. The behavior of the emission lines is interpreted to indicate that the primary and its surrounding nebula suffer a partial eclipse by the cool giant secondary.

Oliversen, N. A.↗

NASA NTRS1998

A Report from the Thermal Science Research Center (TSRC)

A vertical flow loop was designed and assembled to determine the local (circumferential and axial) and mean wall temperature distributions for single-phase and two-phase (subcooled and saturated) downward flow in both uniformly-heated and single-side heated vertical channels. Freon-11 was used as the working fluid in order to directly relate and compare the results with a previous experimental campaign which employed this same working fluid. For a given steady-state experiment, the following parameters were held constant: (1) exit pressure, (2) inlet temperature, and (3) mass velocity. For a given configuration of the 2.2 m long cylindrical channel test section, which had a 1.2 m long heated section, the applied heat rate was varied from zero through successive quasi-steady states to a level which corresponded to localized film boiling in the test section. The measurements showed that the boiling curve changes significantly at higher mass velocities with respect to both the circumferential and axial directions. The slope of the boiling curve changes in a non-monotonic fashion with respect to the circumferential directions. The slope of the boiling curve changes in a non-monotonic fashion with respect to the circumferential direction. The measurements point to the existence of a dry-out phenomenon occurring at multiple levels of the applied heat for the single-side heated channel. In comparing the heat transfer for horizontal channel flow with a vertically downward flow, the results show that significantly lower heat transfer occurs in the horizontal flow. However, this trend reverses as both the Reynolds number and the applied heat rate increase. Both the Liu-Winterton and Shah correlations were compared with the experimental data. The Shah correlation predicted the uniformly heated tube data better. When a thermal hydraulic diameter approach was used for the single-side heated case, the data at upstream locations for Z/L less than 0.5 was bounded above by the Liu-Winterton correlation and below by the Shah correlation. At Z/L = 0.5, the Shah correlation bounded the data; and for Z/L greater than 0.5, both correlations overpredicted the data with the Shah correlation being closest to the data. The present results indicate that additional correlational development is needed. In addressing some of the advanced space thermal management objectives concerning accommodating high heat fluxes in non-uniformly heated systems, a large battery of experiments 88 have been completed where local two-dimensional wall temperature variations were measured for both single-phase and two-phase flow in a single-side heated circular tube. As noted above, the results show significant axial and circumferential variations. Accurately accounting for such variations can result in optimized future advanced space, enhanced (high heat flux) thermal management systems.

Boyd, Ronald D.↗

NASA NTRS1974

A review of turbulence measurements in compressible flow

A survey of turbulence measurements in compressible flows is presented. The majority of turbulence measurements at super- and hypersonic speeds were made for the zero pressure gradient, turbulent boundary layer. It was found that the nondimensional turbulent stress terms for the zero pressure gradient flow appear to agree closely with equivalent incompressible measurements in the outer part of the boundary layer. The stress terms were nondimensionalized by the wall value of shear stress and plotted versus the distance from the wall, nondimensionalized by the boundary-layer thickness. Indirect evaluation of the total shear stress distribution from mean velocity measurements for both super- and hypersonic flows (zero pressure gradient, two-dimensional flows) indicate a near universal distribution. These total shear stress curves also agree very closely with measured incompressible shear stress distributions. Recent laser anemometer measurements of the turbulent Reynolds shear stress (puv), reported by Johnson and Rose for a Mach number 2.9 flow, are in reasonable agreement with the expected total shear stress curve over the outer 60% of the boundary layer.

Sandborn, V. A.↗

NASA NTRS1986

Residual stress measurements in carbon steel

External dc magnetic field-induced changes in natural velocity of Rayleigh surface waves were measured in steel specimens under various stress conditions. The low field slopes of curves representing the fractional changes of natural velocity were proved to provide correct stress information in steels with different metallurgical properties. The slopes of curves under uniaxial compression, exceeding about one third of the yield stress, fell below zero in all the specimens when magnetized along the stress axis. The slopes under tension varied among different steels but remained positive in any circumstances. The stress effect was observed for both applied and residual stress. A physical interpretation of these results is given based on the stress-induced domain structure changes and the delta epsilon effect. Most importantly, it is found that the influence of detailed metallurgical properties cause only secondary effects on the obtained stress information.

Heyman, J. S.↗

NASA NTRS1999

Edge-Flames in Von Karman Swirling Flows

Classical understanding of diffusion flames dictates that they, unlike the premixed flames, do not possess a characteristic propagation velocity and are constrained by stoichiometric requirements at the flame surface. However, it has been commonly observed that when local extinction occurs within a diffusion flame sheet, the edges that are formed propagate with distinct speeds. In general, the propagation speed of these edges depend on their geometrical shape (concave, convex, or straight) among other factors. Recently, Buckmaster investigated the dynamics of straight diffusion flame edges separating burning and quenched regions using simplified one-dimensional models. He showed that these flame edges can have positive, negative, or zero velocity depending on the Damkoehler number of the equilibrium diffusion flame that support them. It was also shown that this unsteady flame-edge behavior is intrinsically linked to S-curve behavior of the diffusion flame with varying Damkoehler number. When the system Damkoehler number lies between the extinction and ignition limits, flame edges can propagate as an "ignition wave" or as a "failure wave," and for a critical Damkoehler number remain as a stationary flame-edge. We have extend Buckmaster's 1-d model to more general edge-flame configurations where the edges appear as "flame holes" or as "flame disks". These two configurations along with the straight-edge case cover the entire range of possible edge-flame geometry observable in planar diffusion-flame sheets. A generalized map of edge-flame propagation velocities as a function of the system Damkoehler number and the edge-flame radius is presented. Experimentally we show that edge flames can be created using diffusion flames embedded in von Karman boundary layers. In a von Karman boundary layer, the flow is generated by spinning a solid (fuel) disk in a quiescent ambient gas. Under normal gravity we were able to produce "flame disks" over a range of fuel-disk rotational velocities varying from 0 to 20 revolutions per second, by orienting the burning surface of the fuel disk facing downward.

Nayagam, Vedha↗

NASA NTRS1976

An experimental investigation of an axisymmetric jet in a coflowing airstream

The flow development of an axisymmetric jet exhausting into a moving airstream has been studied. The jet has a Reynolds number of 22,600, and the ratio of the jet velocity to the wind tunnel velocity is 5.1 to 1. The flow field of the axisymmetric jet was examined at locations varying from approximately zero to eight diameters downstream of the orifice. Of primary concern at each downstream location was the mapping of the one point statistical properties of the flow, including mean velocity, turbulent intensity, and intermittency. Autocorrelations and power spectral density curves were determined for both the fluctuating velocity field and the concentration signal at various distances from the jet's center line for different downstream locations. A laser Doppler velocimeter, using a phase locked loop processor, was used to make the desired velocity field measurements which were compared with hot wire anemometer and pressure probe data.

Catalano, G. D.↗