Search NASA⌕ Search

SEARCH · Search NASA

Results for “ZINC ADDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Iodide manipulation using zinc additives for efficient perovskite solar minimodules

Abstract Interstitial iodides are the most critical type of defects in perovskite solar cells that limits efficiency and stability. They can be generated during solution, film, and device processing, further accelerating degradation. Herein, we find that introducing a small amount of a zinc salt- zinc trifluoromethane sulfonate (Zn(OOSCF 3 ) 2 ) in the perovskite solution can control the iodide defects in resultant perovskites ink and films. CF 3 SOO ̶ vigorously suppresses molecular iodine formation in the perovskites by reducing it to iodide. At the same time, zinc cations can precipitate excess iodide by forming a Zn-Amine complex so that the iodide interstitials in the resultant perovskite films can be suppressed. The perovskite films using these additives show improved photoluminescence quantum efficiency and reduce deep trap density, despite zinc cations reducing the perovskite grain size and iodide interstitials. The zinc additives facilitate the formation of more uniform perovskite films on large-area substrates (78-108 cm 2 ) in the blade-coating process. Fabricated minimodules show power conversion efficiencies of 19.60% and 19.21% with aperture areas of 84 and 108 cm 2 , respectively, as certified by National Renewable Energy Laboratory (NREL), the highest efficiency certified for minimodules of these sizes.

14 SOLAR ENERGY↗
NASA NTRS1990

The effects of zinc addition on the environmental stability of Al-Li alloys

It was found that relatively small addition of Zn can improve the stress corrosion cracking (SCC) resistance of Al-Li alloys. However, the mechanism by which this is accomplished is unclear. The role that Zn plays in altering the behavior of Alloy 8090 is investigated. Early results suggest that Zn additions increase the volume fraction of delta(Al3Li) precipitation and differential scanning calorimetry (DSC) on these alloys confirms this. The four alloys studied each had initial compositions lying in the 8090 window and had varying amounts of Zn added to them. Alloy 8090, like other Al-Li alloys, displays a delta' precipitate free zone (PFZ) upon artificial aging along the grain and subgrain boundaries. However Zn additions greatly decreased or eliminated a delta' PFZ after 100 hours at 160 C. This implies that the subgrain boundary precipitation kinetics are being altered and suppressed. Furthermore, there appears to be a window of Zn concentration above which a delta ' PFZ can reappear with the nucleation and growth of a currently unidentified precipitate on the boundaries. Polarization experiments were performed and the results presented. The experiments were performed in deaerated 3.5 w/o NaCl in both as received (T3) condition and at peak aging of 100 hours at 160 C. The aging profile was determined via Vickers Hardness tests.

Kilmer, Raymond J.↗
NASA NTRS1991

The effect of zinc additions on the environmental stability of Alloy 8090 (Al-Li-Cu-Mg-Zr)

Stress corrosion cracking (SCC) remains a problem in both Al-Li and conventional Al heat treatable alloys. It has recently been found that relatively small additions (less than or approximately 1 wt-percent) of Zn can dramatically improve the SCC performance of alloy 8090 (Al-Li-Cu-Mg-Zr). Constant load time to failure experiments using cylindrical tensile samples loaded between 30 and 85 percent of TYS indicate improvements of orders of magnitude over the baseline 8090 for the Zn-containing alloys under certain aging conditions. However, the toughnesses of the alloys were noticeably degraded due to the formation of second phase particles which primarily reside on grain and subgrain boundaries. EDS revealed that these intermetallic particles were Cu and Zn rich. The particles were present in the T3 condition and were not found to be the result of quench rate, though their size and distribution were. At 5 hours at 160 C, the alloys displayed the greatest susceptibility to SCC but by 20 hours at 160 C the alloys demonstrated markedly improved TTF lifetimes. Aging past this time did not provide separable TTF results, however, the alloy toughnesses continued to worsen. Initial examination of the alloys microstructures at 5 and 20 hours indicated some changes most notably the S' and delta' distributions. A possible model by which this may occur will be explored. Polarization experiments indicated a change in the trend of E(sub BR) and passive current density at peak aging as compared to the baseline 8090. Initial pitting experiments indicated that the primary pitting mechanism in chloride environments is one occurring at constituent (Al-Fe-Cu) particles and that the Cu and Zn rich boundary precipitates posses a breakaway potential similar to that of the matrix acting neither anodic or cathodic in the first set of aerated 3.5 w/o NaCl experiments. Future work will focus on the identification of the second phase particles, evaluation of K(sub 1SCC) and plateau da/dt via both DCB and slow strain rate techniques. A lower Zn content variant will be examined in the near future in hopes of optimizing toughness, density and SCC performance.

Kilmer, Raymond J.↗
DOE OSTI2023

Assessing the Behavior of Moderately Volatile Elements on the Moon in Order to Constrain Processes of Magmatic Evolution and Planetary Accretion

Heterogeneous isotopic compositions of Zn and Ga in lunar basalts and highlands rocks indicate that secondary processing affected the stable isotopic composition of major lunar reservoirs. It follows that these fractionating processes must be identified and characterized in order to make robust estimates for the isotopic composition of the mare basalt source regions or the bulk silicate Moon (BSM). Contrary to previous assertions (e.g., Kato & Moynier, 2017), MVEs such as Zn and Ga do not behave similarly on the Moon, in line with differences in their chemical behavior and volatility. There is clear evidence that impact reworking fractionates zinc isotopes but, in addition, zinc isotopes are also highly sensitive to the formation of Ti-bearing oxides such as ilmenite. In contrast, gallium is far less susceptible to volatile reworking, but its isotopic composition is fractionated during incorporation into plagioclase (Wimpenny et al., 2022; Render et al., 2023). Based on these findings we conclude that current isotopic compositions of Zn and Ga in lunar rocks, such as those measured for the mare basalt suite, are unlikely to be representative of the bulk Moon when it accreted. As such, estimates for the MVE isotopic composition of the BSM derived from mare basalts may not be accurate, which may have implications for the incorporation of these data into dynamical models of the Moon’s formation. In the following, we discuss the main findings from this project in more detail, focusing on the behaviour of zinc and gallium isotopic systematics in lunar rocks and the processes that control their isotopic fractionation on the Moon.

58 GEOSCIENCES↗
NASA NTRS1983

Additive for zinc electrodes

A zinc electrode for alkaline cells includes up to about ten percent by weight of Ba(OH)2.8H2O with about five percent being preferred. The zinc electrode may or may not be amalgamated with mercury.

Soltis, D. G.↗
DOE OSTI2022

Structure and Function of the Zinc Binding Protein ZrgA from Vibrio cholerae

ATP binding cassette (ABC) transporters are the primary means by which bacteria acquire trace elements from the environment. They rely on solute binding proteins (SBPs) to bind the relevant substrate and deliver it to the integral membrane permease for ATP-powered import into the cytoplasm. SBPs of cluster A-I are known to facilitate the transport of essential metals zinc, manganese, and iron, and many have been characterized to date. A group of ABC transporter operons dubbed zinc-regulated genes (zrg) have recently been shown to transport zinc with putative SBPs (zrgA) bearing no homology to the classical cluster A-I family, and a recent crystal structure of a representative protein from Pseudomonas aeruginosa shows no structural similarity to classical SBPs. Thus, the ZrgA proteins appear to represent a newly discovered family of zinc SBPs widespread among Gram-negative bacteria, including human pathogens. Here, we have determined the crystal structure of ZrgA from Vibrio cholerae and characterized its zinc binding in vitro and function in vivo. We also assessed the role of a histidine-rich sequence that appears to be a hallmark of ZrgA proteins that is particularly long in V. cholerae ZrgA. The results show that the zrgA gene is critical to the function of the operon, consistent with a function as an SBP in this system. Further, the His-rich region is not essential to the function of ZrgA, but it does provide additional zinc binding sites in vitro. The structure and zinc binding data for ZrgA reveal interesting differences between it and its homologue from P. aeruginosa, illustrating diversity within this little-studied protein family.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Material-Dependent Antagonistic Effects between Soot and ZDDP

While soot in engine oil is known to accelerate the wear of diesel and gasoline direct-injection compression-ignition engines, there is a lack of consensus on the wear mechanism though various hypotheses have been proposed in the literature. Particularly, some recently observed antagonistic effects between soot and a common lubricant antiwear additive, zinc dialkyldithiophosphate (ZDDP), while others did not. The discrepancy is, in part, explained by the strong alloy dependence of such antagonism discovered in this study. Specifically, four alloys, 52100 steel and M2, M50, and A2 tool steels, are tested in lubricants containing carbon black (CB, a soot surrogate) with and without ZDDP present. Adding the CB alone to the oil increases the wear rate for all steel alloys as expected. However, distinct wear performance is observed for the four steel alloys when ZDDP is introduced to the CB-containing oil: while the 52100 steel has notable wear reduction, the three tool steels suffer significant wear increase. Comprehensive tribofilm characterization suggests that the Mo content in the steel alloy and the sulfur from ZDDP strongly influence wear behavior. The combination of CB/Mo-catalyzed sulfidation and CB-accelerated abrasion is hypothesized to be responsible for the high wear of the Mo-alloyed tool steels.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Effect of Zinc on the Structural, Electrical, and Mechanical Properties of YBCO-123 Superconducting Nanoparticles Prepared by an Acetate-Based Sol-Gel Process

In this study, zinc (Zn)-doped YBaCuO (YBCO)-123-based high-temperature superconducting samples were produced using the sol-gel method, which is commonly used for preparing nanosize materials. Zn ions were substituted by Cu ions (YBa{sub 2}Cu{sub 3-x}Zn{sub x}O), and Zn doping effects on structural, electrical, and mechanical properties of the YBCO-123 superconductors were examined in detail. Undoped sample was prepared under same conditions. X-ray diffraction analysis (XRD) was used to determine phase analysis and lattice parameters of the superconducting samples. To analyze the microstructure properties, scanning electron microscope (SEM) measurements were performed. Resistivity and microhardness measurements were also carried out for superconducting and mechanic properties, respectively. Vickers microhardness, young modulus, fracture toughness, and yield strength values of the samples were calculated. Microhardness measurements were analyzed using the Kick’s law, proportional sample resistance (PSR) model, EPD model, the Hays-Kendall (HK) approach, and indentation-induced cracking (IIC) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Synthesis and structure of Sr 14 Zn 1+ x As 11 and Eu 14 Zn 1+ x As 11 (x ≤ 0.5). New members of the family of pnictides isotypic with Ca 14 AlSb 11 , exhibiting a new type of structural disorder

Systematic investigation of the ternary systems A–Zn–As (A = Sr, Eu) led to the discovery of two new ternary phases, Sr 14 Zn 1+x As 11 and Eu 14 Zn 1+x As 11 (x ≤ 0.5). Both title compounds were structurally characterized by single-crystal X-ray diffraction. The basic structure of these new arsenides is akin to that of the numerous other pnictides adopting the tetragonal Ca 14 AlSb 11 structure type (space group I4 1 / acd (No. 142); Z = 8). The main difference is the presence of an interstitial Zn atom, located in a nearly trigonal-planar coordination environment of three As atoms. Four such fragments share common edges with the regular ZnAs 4 tetrahedron, to form an unusual new structural unit with the formula [Zn 1+x Sb 8] . The small uptake of additional zinc is needed to augment the overall valence electron count, thereby driving the system to an electronically charge-balanced state. Upon partial substitution of the nominally divalent Sr with a trivalent La, the equivalent of electron doping, the structure rids itself of the interstitial zinc, as demonstrated on the example of Sr 13.30(2) La 0.70 ZnAs 11 , which was also structurally characterized by single-crystal X-ray diffraction as part of this study. In conclusion, electronic structure calculations for the idealized composition Sr 14 ZnAs 11 confirm the speculated electron-deficient assignment, and suggest intrinsic semiconducting behavior for the one-electron richer Sr 14 Zn 1+x As 11 (x = 0.5) and Sr 13 LaZnAs 11 , respectively.

36 MATERIALS SCIENCE↗
NASA NTRS1993

NASA-UVA Light Aerospace Alloy and Structures Technology Program (LA2ST)

The NASA-UVA Light Aerospace Alloy and Structures Technology (LA2ST) Program continues a high level of activity. Progress achieved between 1 Jan. and 30 Jun. 1993 is reported. The objective of the LA2ST Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and thermal gradient structures in collaboration with NASA-Langley researchers. The following projects are addressed: environmental fatigue of Al-Li-Cu alloys; mechanisms of localized corrosion and environmental fracture in Al-Cu-Li-Mg-Ag alloy X2095 and compositional variations; the effect of zinc additions on the precipitation and stress corrosion cracking behavior of alloy 8090; hydrogen interactions with Al-Li-Cu alloy 2090 and model alloys; metastable pitting of aluminum alloys; cryogenic fracture toughness of Al-Cu-Li + In alloys; the fracture toughness of Weldalite (TM); elevated temperature cracking of advanced I/M aluminum alloys; response of Ti-1100/SCS-6 composites to thermal exposure; superplastic forming of Weldalite (TM); research to incorporate environmental effects into fracture mechanics fatigue life prediction codes such as NASA FLAGRO; and thermoviscoplastic behavior.

Gangloff, Richard P.↗
DOE OSTI2022

Identity of the reversible hole traps in InP/ZnSe core/shell quantum dots

Density functional theory calculations are combined with time-resolved photoluminescence experiments to identify the species responsible for reversible trapping of holes following photoexcitation of InP/ZnSe/ZnS core/shell/shell quantum dots (QDs) having excess indium in the shell. Several possible assignments are considered, and a substitutional indium adjacent to a zinc vacancy, In 3+ /V Zn 2- , is found to be the most likely. This assignment is consistent with the observation that trapping occurs only when the QD has excess indium and is supported by experiments showing that the addition of zinc oleate or acetate decreases the extent of trapping, presumably by filling some of the vacancy traps. We also show that addition of alkyl carboxylic acids causes increased trapping, presumably by creation of additional zinc vacancies. The calculations show that either a single In 2+ ion or an In 2+ -In 3+ dimer is much too easily oxidized to form the reversible traps observed experimentally, while In 3+ is far too difficult to oxidize. Additional experimental data on InP/ZnSe/ZnS QDs synthesized in the absence of chloride demonstrates that the reversible traps are not associated with Cl - . Furthermore, a zinc vacancy adjacent to a substitutional indium is calculated to have its highest occupied orbitals about 1 eV above the top of the valence band of bulk ZnSe, in the appropriate energy range to act as reversible traps for quantum confined holes in the InP valence band. The associated orbitals are predominantly composed of p orbitals on the Se atoms adjacent to the Zn vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Evaluation and auger analysis of a zinc-dialkyl-dithiophosphate antiwear additive in several diester lubricants

The wear of pure iron in sliding contact with hardened M-2 tool steel was measured for a series of synthetic diester fluids, both with and without a zinc dialkyl dithiophosphate (ZDP) antiwear additive, as test lubricants. Selected wear scars were analyzed by an Auger emission spectroscopy (AES) depth profiling technique in order to assess the surface film elemental composition. The ZDP was an effective antiwear additive for all the diesters except dibutyl oxalate and dibutyl sebacate. The high wear measured for the additive-containing oxalate was related to corrosion; the higher wear measured for the additive-containing sebacate was due to an oxygen interaction. The AES of dibutyl sebacate surfaces run in dry air and in dry nitrogen showed large differences only in the amount of oxygen present. The AES of worn surfaces where the additive was effective showed no zinc, only a little phosphorus, and large amounts of sulfur.

Brainard, W. A.↗
NASA NTRS1986

Solid lubrication design methodology, phase 2

The high temperature performance of solid lubricated rolling elements was conducted with a specially designed traction (friction) test apparatus. Graphite lubricants containing three additives (silver, phosphate glass, and zinc orthophosphate) were evaluated from room temperature to 540 C. Two hard coats were also evaluated. The evaluation of these lubricants, using a burnishing method of application, shows a reasonable transfer of lubricant and wear protection for short duration testing except in the 200 C temperature range. The graphite lubricants containing silver and zinc orthophosphate additives were more effective than the phosphate glass material over the test conditions examined. Traction coefficients ranged from a low of 0.07 to a high of 0.6. By curve fitting the traction data, empirical equations for slope and maximum traction coefficient as a function of contact pressure (P), rolling speed (U), and temperature (T) can be developed for each lubricant. A solid lubricant traction model was incorporated into an advanced bearing analysis code (SHABERTH). For comparison purposes, preliminary heat generation calculations were made for both oil and solid lubricated bearing operation. A preliminary analysis indicated a significantly higher heat generation for a solid lubricated ball bearing in a deep groove configuration. An analysis of a cylindrical roller bearing configuration showed a potential for a low friction solid lubricated bearing.

Pallini, R. A.↗
DOE OSTI2019

Effect of Zn Concentration on the Structure, Morphology, and Magnetic Behavior of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrofluid

In this work, we investigated the effect of doping zinc ions onto nickel ferrite upon the structure, morphology, and magnetic properties of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles (x = 0, 0.25, and 0.75) prepared via co-precipitation method. X-ray diffraction analysis showed the presence of the most intense peak corresponding to the (311) crystallographic orientation of NiFe{sub 2}O{sub 4} cubic spinel phase, and the crystallite size obtained from Scherrer formula increased from 6.8 to 11.2 nm when the Zn concentration increases from x = 0 to x = 0.75. Fourier transform infrared spectroscopy analysis confirmed the presence of a prominent band associated to the vibrations of metal ions, as a feature of spinel ferrite phase formation, observing that their band positions were very sensitive to Zn doping concentration. Transmission electron microscopy studies allowed to determinate that for all Zn concentrations, the particle sizes are around 15 nm. The magnetic properties were studied by using the vibrating sample magnetometer at room temperature. The results reveal superparamagnetic behavior determined by the shape of the hysteresis loop, presenting decreased coercive magnetic field and increased saturation magnetization, with increased zinc concentration. Additionally, from field cooling and zero field cooling curves, we can observe the typical behavior of the blocking process assembly of superparamagnetic nanoparticles. Alternate current susceptibility measurements show that the blocking temperature is frequency dependent and shifts toward higher temperatures by increasing the frequency, a characteristic of superparamagnetic, and glassy systems. Furthermore, τ{sub 0}, related to the jump attempt frequency of the magnetic moment of the nanoparticle between the opposite directions of the magnetization easy axis, is in the range of 2 × 10{sup −10} and 7 × 10{sup −13} s for the three different Zn concentrations, which agrees with characteristic of non-interacting superparamagnetic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Photoluminescence of ZnO/C Nanocomposites Formed by the Sol-Gel Method

Films of undoped zinc oxide (ZnO) and of ZnO/C nanocomposite were formed by the sol-gel method on glass substrates and on fiberglass using zinc acetate as a precursor and with the addition of zinc chloride respectively. Analysis of the photoluminescence spectra of ZnO/C films at high (N{sub 2}-laser) and low (HeCd-laser) excitation levels made it possible to establish the defining role of bound excitons in this process at 20–60 K, due to the presence of chlorine residues in the films. With the temperature raised to 300 K the role of recombination through the 1LO- and 2LO-phonon replicas of free exciton levels and impurity-defect levels begins to dominate in the photoluminescence of the ZnO/C films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗