Search NASA⌕ Search

SEARCH · Search NASA

Results for “ZIRCON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The Effects of Experimentally Induced Zircon Annealing on Melt Inclusion-Zircon Geochemistry: A Case Study of Archean Zircon From the Barberton Complex

Crystalline melt inclusions (MIs) in Archean zircons can potentially constrain the evolution of magmatic processes. However, to obtain a homogeneous glassy MI representative of the parent melt, devitrified MIs must be heated at temperatures above the liquidus. Although, it is well known that radiation damaged domains in MI-host zircon undergo temperature-time dependent annealing, the effects of annealing on zircon stable isotope and trace element compositions has received less attention. In this study, we heated multiple aliquots of low-magnetism zircons with relatively low levels of radiation damage (Deff<9.6x1014 α-events/mg) from a 3.304 Ga tonalite gneiss xenolith from the Barberton greenstone belt (sample B87-18; Kamo and Davis, 1994) in an internally-heated pressure vessel at 0.4GPa and 1000–1200°C. Zircons were imaged by SEM (CL, BSE) to determine the zoning patterns around the MIs. The radiation damage preserved in the heated and unheated zircons was determined by measuring broadening of the 3(SiO4) Raman stretching band of zircon (FWHM). Oxygen isotope ratios (δ18O), OH/O ratios, and trace and rare earth element (TREE) concentrations were measured in the zircons and MIs using SIMS. The FWHM and Raman shift of the zircon 3(SiO4) band show a systematic increase of zircon crystallinity with increasing experimental temperature. Despite increasing crystallinity, the 3(SiO4) FWHM is not correlated with δ18O(Zrn) values in the heated or unheated zircons, suggesting that δ18O was not altered by laboratory heating in these low initial radiation damage zircons. FWHM and OH/O are positively correlated in both heated and unheated zircons. The unheated zircons have the largest FWHM and OH/O (OH/OMAX=3.5×10-4) suggesting that H2O was lost during experimental heating due to the progressive annealing of radiation-damaged domains in the zircons. Zircon TREE concentrations and FWHM values are not correlated despite the presence of TREE altered domains in both the heated and unheated zircons. Our results demonstrate that pre-experimental zircon TREE concentrations and δ18O(Zrn) remain intact during laboratory heating of crystalline MIs in zircon, while secondary H2O hosted in radiation damaged domains is partially lost. Thus, MIs in low initial radiation damage Archean zircon are a potentially viable tool for constraining melt compositions.

Joseph P. Gonzalez↗

Coordinated U–Pb geochronology, trace element, Ti-in-zircon thermometry and microstructural analysis of Apollo zircons

Here, we present the results of a coordinated SIMS U–Pb, trace element, Ti-in-zircon thermometry, and microstructural study of 155 lunar zircons separated from Apollo 14, 15, and 17 breccia and soil samples that help resolve discrepancies between the zircon data, the lunar whole rock history and lunar magma ocean crystallization models. The majority of lunar grains are detrital fragments, some nearly 1 mm in length, of large parent crystals suggesting that they crystallized in highly enriched KREEP magmas. The zircon age distributions for all three landing sites exhibit an abundance of ages at ~4.33 Ga, however they differ in that only Apollo 14 samples have a population of zircons with ages between 4.1 and 3.9 Ga. These younger grains comprise only 10% of all dated lunar zircons and are usually small and highly shocked making them more susceptible to Pb-loss. These observations suggest that the majority of zircons crystallized before 4.1 Ga and that KREEP magmatism had predominantly ceased by this time. We also observed that trace element analyses are easily affected by contributions from inclusions (typically injected impact melt) within SIMS analyses spots. After filtering for these effects, rare-earth element (REE) abundances of pristine zircon are consistent with one pattern characterized by a negative Eu anomaly and no positive Ce anomaly, implying that the zircons formed in a reducing environment. This inference is consistent with crystallization temperatures based on measured Ti concentrations and new estimates of oxide activities which imply temperatures ranging between 958 ± 57 and 1321 ± 100 °C, suggesting that zircon parent magmas were anhydrous. Together, the lunar zircon ages and trace elements are consistent with a ≤300 My duration of KREEP magmatism under anhydrous, reducing conditions. We also report two granular texture zircons that contain baddeleyite cores, which both yield 207 Pb– 206 Pb ages of 4.33 Ga. These grains are our best constraints on impact ages within our sample population, and suggest at least one large impact is contemporaneous with the most common time of magmatic zircon formation on the Moon’s crust visited by the Apollo missions.

58 GEOSCIENCES↗

Insights Into Reconstructing REE Compositions of Melt From Zircon-Melt Partition Coefficients Using Zircon-Hosted Melt Inclusions From the Yellowstone Volcanic Province

Establishing the major and trace element composition of the Earth’s melts (Hadean to recent) is essential for understanding crustal evolution. Due to its physical-chemical resilience, zircon spans the complete age spectra of Earth’s history, and thus provides the only physical record from the early Earth. However, the petrological context i.e., the melt from which zircon crystallised, is often lost, except for inclusions of melt preserved within zircon. Melt inclusions in zircon (MI) provide a valuable tool to constrain zircon-melt REE partition coefficients (D REE ), which are used with the zircon REE chemistry to reconstruct melt compositions. Such reconstruction requires accurate partition coefficients, which are particularly sensitive to temperature, but also to pressure and melt composition. We determined the major and trace element compositions of 60 co-existing zircon-MI pairs from two ~ 2 Ma age rhyolites (the caldera-forming Huckleberry Ridge Tuff; HRT-C and the post-caldera Blue Creek Flow; BC-1) of the Yellowstone Plateau volcanic field by EPMA and SIMS, and calculated a set of 60 zircon-MI partition coefficients. The MI from both units are glassy with average silica contents of 78.30 ± 0.74 and 77.19 ± 1.11 wt %, and Ti-in-zircon crystallisation temperatures are 839 ± 36 and 835 ± 35 oC. Measured D REE patterns for each population (n = 30) are tightly constrained and exhibit a smooth pattern spanning ~ six orders of magnitude from La to Lu, (with exceptions at Ce and Eu), and for the HRT exhibit greater curvature (i.e., flatter) between the MREE to HREE compared to the BC-1. D REE patterns for the HRT have small to moderate Ce anomalies (Ce/Ce* Di 50 ± 40), whereas those in the BC-1 are larger (98 ± 45), and both units exhibit negligible to positive Eu anomalies (Eu/Eu* Di 1.07 ± 0.89 and 1.80 ± 2.01, respectively). We compare the trace element compositions of the MI to bulk-glass compositions from Yellowstone to assess any differences, which are small, then compare the measured MI compositions to those reconstructed using published partition coefficients (natural, empirical and experimental). The choice of D REE for reconstruction of the melt REE pattern results in differing petrogenetic interpretations.

Laura J. Crisp↗

Atom probe tomography analysis of the reference Zircon GJ-1: An interlaboratory study

In recent years, atom probe tomography (APT) has been increasingly used to study minerals, and in particular the mineral zircon. Zircon (ZrSiO 4 ) is ideally suited for geochronology by utilising the U-Th-Pb isotope systems, and trace element compositions are also widely used to constrain petrogenetic processes. However, while standard geoanalytical techniques provide information at micron scale lengths, the unique combination of chemical/isotopic sensitivity and spatial resolution of APT allows compositional and textural measurements at the nanoscale. This round robin study aims to define the reproducibility of APT data across research facilities and assess the role of different aspects of the atom probe workflow on reproducibility. This is essential to allow correct evaluation of APT results and full utilization of this emerging technique within the geoscience community. In this study, nine samples from the same homogemeous, GJ-1/87 zircon reference grain were sent to nine APT institutes in Europe, USA, Canada and Australia. Each institute conducted three different rounds of APT analyses: using (i) unconstrained analysis parameters, [1] pre-defined analysis parameters, and (iii) a data analysis exercise. Data such as the measured composition, acquisition parameters, or mass spectrum peak identifications, were recorded and analyzed. We observe a significant variation in the measured composition across this round robin study as well as the number of trace elements identified. These differences are thought to directly result from the user's choice of peak identification, ranging and background correction model. The type of instrument does not seem to be a critical factor. Consequently, comparison of absolute trace element data on zircon using APT between laboratories is only valid if the same workflow has been ensured.

round robin, atom probe tomography, reference zirc↗

Lead in zircon at the atomic scale

Lead-doped zircon crystals, which were synthesized under three different conditions (Watson et al. 1997): dry at 1430 °C at atmospheric pressure without P2O5; wet at 900 °C at 1.5 GPa in the presence of P2O5; and wet at 800 °C at 1.0 GPa without P2O5, have been investigated to understand the mechanisms of Pb incorporation into zircon at the sub-micrometer scale, using various electron microscopy techniques including high-resolution transmission electron microscopy (HRTEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Four different mechanisms in which Pb may be incorporated into zircon have been identified. In the P-free synthesis, Pb-oxide hydrate particles, 50–200 nm in size, are embedded in zircon. Each Pb-particle is associated with a single vesicle, ~50 nm. Lead in the zircon structure is possibly incorporated under the detection limit value of energy-dispersive X-ray analysis (EDX) by means of: (1) Zr4+ = Pb2+ + 2H+ at less than ~0.1 wt%. In the system with P, Pb-phases occur in three different forms: Pb-rich domains concentrated along cleavage planes or grain boundaries without any evident crystal form; numerous Pb-phosphate particles, as large as 100 nm, embedded heterogeneously in the zircon crystal; and homogeneous distribution of Pb in the zircon structure at less than ~1 wt% as determined by EDX. These results suggest that charge balance is maintained by the xenotime-type coupled substitution: (2) Zr4+ + 2Si4+ = Pb2+ + 2P5+ with a possible minor contribution from mechanism 1. The apparent solubility limit of Pb, <1 wt%, is constrained mainly by the xenotime-type coupled substitution mechanism, which is probably due to increasing strain at higher Pb-concentrations. The presence of Pb2+ in natural zircon is consistent with the low-level Pb allowed by substitution mechanism 2, with only a minor contribution from substitution mechanism 1, the latter of which causes distortion in the local structure.

58 GEOSCIENCES↗

OH species, U ions, and CO/CO 2 in thermally annealed metamict zircon (ZrSiO 4 )

Metamict zircon crystals have been thermally annealed between 500 and 1800 K and analyzed using infrared and optical spectroscopy in the spectral region of 1400–7000 cm -1 . Recrystallization and dehydroxylation via complex proton/OH diffusion, redistribution, and incorporations of additional hydrogen-related species within the crystal structure of zircon occur at temperatures above 700 K in partially metamict zircon and above 1200 K in heavily amorphized material. Thermally induced changes in O-H stretching spectra are different between E || c and E ⊥ c in weakly metamict zircon. The O-H stretching band near 3342 cm -1 (with E ⊥ c) in an untreated sample shifts to 3277 cm -1 at 1200 K, where the frequency of O-H stretching bands with E || c increases. Conversions of hydrogen-related species were observed and extra OH bands were found at temperatures between 1200 and 1600 K. A dramatic change of OH spectra was recorded between 1600 and 1800 K in partially metamict crystals, resulting in additional absorption features (near 3098 and 2998 cm -1 along E ⊥ c). U 4+ and U 5+ related spectra are also affected by high-temperature annealing. For highly metamict zircon, the U 4+ band near 4830 cm -1 shows an increase in intensity above 1200 K. Additional IR bands at 2146 and 2344 cm -1 appear in the spectra of metamict zircon annealed at high temperatures. Their frequencies are consistent with stretching vibrations of CO and CO 2 .

36 MATERIALS SCIENCE↗

Where are the Shocked Grains in the Hadean Zircon Record? Insights on the Preservation of Shocked Zircon and Their U-Pb Systematics

While the earliest history of many planetary bodies within the inner Solar System is dominated by intense bombardment, this record is missing from Earth due to active tectonics and erosion. Where-as rocks from the earliest history of Earth are absent, mineral relics, such as ancient detrital zircon concentrated in sediments within the Jack Hills, Narryer, Illara and Maynard Hills greenstone belts of the Yilgarn Craton in Western Australia preserve a record of this time.Shock in zircon: During shock deformation, resulting from hyper-velocity impact, zircon can be modified in crystallographically-controlled ways. This includes the development of planar and subplanar low-angle grain boundaries, the formation of mechanical twins, transformation to the high pressure polymorph reidite, development of polycrystalline microtexture, and dissociation to its dioxide constituents SiO2 and ZrO2.

Erickson, T. M.↗

Improved zircon fission-track annealing model based on reevaluation of annealing data

The thermal recovery (annealing) of mineral structure modified by the passage of fission fragments has long been studied by the etching technique. In minerals like apatite and zircon, the annealing kinetics are fairly well constrained from the hour to the million-year timescale and have been described by empirical and semi-empirical equations. On the other hand, laboratory experiments, in which ion beams interact with minerals and synthetic ceramics, have shown that there is a threshold temperature beyond which thermal recovery impedes ion-induced amorphization. In this work, it is assumed that this behavior can be extended to the annealing of fission tracks in minerals. It is proposed that there is a threshold temperature, T0, beyond which fission tracks are erased within a time t0, which is independent of the current state of lattice deformation. This implies that iso-annealing curves should converge to a fanning point in the Arrhenius pseudo-space (ln t vs. 1/T). Based on the proposed hypothesis, and laboratory and geological data, annealing equations are reevaluated. The geological timescale estimations of a model arising from this study are discussed through the calculation of partial annealing zone and closure temperature, and comparison with geological sample constraints found in literature. It is shown that the predictions given by this model are closer to field data on closure temperature and partial annealing zone than predictions given by previous models.

annealing↗

Influence of Nonstoichiometry on Proton Conductivity in Thin-Film Yttrium-Doped Barium Zirconate

Proton-conducting perovskites have been widely studied because of their potential application as solid electrolytes in intermediate temperature solid oxide fuel cells. Structural and chemical heterogeneities can develop during synthesis, device fabrication, or service, which can profoundly affect proton transport. Here, we use time-resolved Kelvin probe force microscopy, scanning transmission electron microscopy, atom probe tomography, and density functional theory calculations to intentionally introduce Ba-deficient planar and spherical defects and link the resultant atomic structure with proton transport behavior in both stoichiometric and nonstoichiometric epitaxial, yttrium-doped barium zirconate thin films. The defects were intentionally induced through high-temperature annealing treatment, while maintaining the epitaxial single crystalline structure of the films, with an overall relaxation in the atomic structure. As a result, the annealed samples showed smaller magnitudes of local lattice distortions because of the formation of proton polarons, thereby leading to decreased proton-trapping effect. This resulted in a decrease in the activation energy for proton transport, leading to faster proton transport.

36 MATERIALS SCIENCE↗

Additive effects of electronic and nuclear energy loss in irradiation-induced amorphization of zircon

We used a combination of ion cascades and the unified thermal spike model to study the electronic effects from 800 keV Kr and Xe ion irradiation in zircon. We compared the damage production for four cases: (a) due to ion cascades alone, (b) due to ion cascades with the electronic energy loss activated as a friction term, (c) due to the thermal spike from the combined electronic and nuclear energy losses, and (d) due to ion cascades with electronic stopping and the electron-phonon interactions superimposed. As a result, we found that taking the electronic energy loss out as a friction term results in reduced damage, while the electronic electron-phonon interactions have additive impact on the final damage created per ion.

36 MATERIALS SCIENCE↗

Zirconate pyrochlores under high pressure

Ab initio total-energy calculations and x-ray diffraction measurements have been combined to study the phase stability of zirconate pyrochlores (A2Zr2O7; A=La, Nd and Sm) under pressures up to 50 GPa. Phase transformations to the defect-cotunnite structure are theoretically predicted at pressures of 22, 20 and 18 GPa, in excellent agreement with the experimentally determined values of 21, 22 and 18 GPa for La2Zr2O7, Nd2Zr2O7 and Sm2Zr2O7, respectively. Analysis of the elastic properties indicates that elastic anisotropy may be one of the driving forces for the pressure-induced cubic-to-noncubic phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation-induced disorder in compressed lanthanide zirconates

For this study, the effects of swift heavy ion irradiation-induced disordering on the behavior of lanthanide zirconate compounds (Ln 2 Zr 2 O 7 where Ln = Sm, Er, or Nd) at high pressures are investigated. After irradiation with 2.2 GeV 197 Au ions, the initial ordered pyrochlore structure (Fm$\bar{3}$m) transformed to a defect-fluorite structure (Fm$\bar{3}$m) in Sm 2 Zr 2 O 7 and Nd 2 Zr 2 O 7 . For irradiated Er 2 Zr 2 O 7 , which has a defect-fluorite structure, ion irradiation induces local disordering by introducing Frenkel defects despite retention of the initial structure. When subjected to high pressures (>29 GPa) in the absence of irradiation, all of these compounds transform to a cotunnite-like ( Pnma ) phase, followed by sluggish amorphization with further compression. However, if these compounds are irradiated prior to compression, the high pressure cotunnite-like phase is not formed. Rather, they transform directly from their post-irradiation defect-fluorite structure to an amorphous structure upon compression (>25 GPa). Defects and disordering induced by swift heavy ion irradiation alter the transformation pathways by raising the energetic barriers for the transformation to the high pressure cotunnite-like phase, rendering it inaccessible. As a result, the high pressure stability field of the amorphous phase is expanded to lower pressures when irradiation is coupled with compression. The responses of materials in the lanthanide zirconate system to irradiation and compression, both individually and in tandem, are strongly influenced by the specific lanthanide composition, which governs the defect energetics at extreme conditions.

36 MATERIALS SCIENCE↗

Fatigue of extracted lead zirconate titanate multilayer actuators under unipolar high field electric cycling

Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses subunits extracted from prototypes has been pursued. Extracted 10-layer and 20-layer plate specimens were subjected to an electric cycle test under an electric field of 3.0/0.0 kV/mm, 100 Hz to 10{sup 8} cycles. The effects of measurement field level and stack size (number of PZT layers) on the fatigue responses of piezoelectric and dielectric coefficients were observed. On-line monitoring permitted examination of the fatigue response of the PZT stacks. The fatigue rate (based on on-line monitoring) and the fatigue index (based on the conductance spectrum from impedance measurement or small signal measurement) were developed to quantify the fatigue status of the PZT stacks. The controlling fatigue mechanism was analyzed against the fatigue observations. The data presented can serve as input to design optimization of PZT stacks and to operation optimization in critical applications, such as piezoelectric fuel injectors in heavy-duty diesel engines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluorine contamination in yttrium-doped barium zirconate film deposited by atomic layer deposition

The authors have investigated the change of chemical composition, crystallinity, and ionic conductivity in fluorine contaminated yttrium-doped barium zirconate (BYZ) fabricated by atomic layer deposition (ALD). It has been identified that fluorine contamination can significantly affect the conductivity of the ALD BYZ. The authors have also successfully established the relationship between process temperature and contamination and the source of fluorine contamination, which was the perfluoroelastomer O-ring used for vacuum sealing. The total removal of fluorine contamination was achieved by using all-metal sealed chamber instead of O-ring seals.

36 MATERIALS SCIENCE↗