Search NASA⌕ Search

SEARCH · Search NASA

Results for “ablative materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials

The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials (Final Technical Report)

The goal of this project was to conduct dynamic compression experiments and predictive simulations to reveal the fundamental high-energy-density (HED) physics of amorphous carbon. These results are essential for assessing amorphous carbon as a potential ablator material for next generation of inertial confinement fusion (ICF) capsules. We made significant progress in exploring the HED properties of amorphous carbon through experiments at Omega EP Laser and the European XFEL, in addition to billion-atom, quantum-accurate molecular dynamics (MD) simulations. Through our joint experimental and simulation program, we mapped the phase diagram of amorphous carbon, uncovering its range of metastability and identifying phase transitions to diamond and liquid carbon along the Hugoniot and at higher pressures using double shock compression pathways. Our findings indicate that amorphous carbon melts at significantly lower shock pressures than high-density carbon (diamond). However, nanocrystalline diamond nucleates across a broad range of pressures and temperatures. This emergence of the nanocrystalline microstructure during compression can negatively impact the planarity of the shock front and potentially trigger ablator/fuel mixing during Inertial Fusion Energy (IFE) applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Characterization of ablator dynamics initiated by picket-pulse conditions

Direct-drive laser-fusion targets may include low-cost plastic ablator material. Here, this work describes a tabletop experimental system designed to enable the investigation of the interaction of such ablator material as a function of the laser wavelength and the associated excitation mechanism. This experimental system offers time-resolved imaging of the material response with subpicosecond temporal resolution and ≈1-μm spatial resolution. The system involves synchronized femtosecond and picosecond lasers to initiate and characterize the dynamics of polystyrene planar targets irradiated by conditions similar to a “picket” prepulse from a direct-drive pulse shape. Ultrafast imaging of the initial excitation process followed by the resulting critical plasma formation, shock-wave propagation, and blowoff plasma expansion is used to compare the impact of excitation wavelength, 355 nm or 266 nm, on the ensuing dynamics. This work aims to investigate fundamental laser material interactions to help advance physics models that can inform the development of laser driver and target designs.

42 ENGINEERING↗
DOE OSTI2025

High-Power Impulse Magnetron Sputter Deposition of Boron Carbide with Full-Face Erosion Magnetron and Mixed Ar-Ne Plasma

Boron carbide (B 4 C) is an attractive inertial confinement fusion ablator material. The fabrication of B4C ablators by magnetron sputtering requires process optimization. To increase process flexibility, here we explore high-power impulse magnetron sputter (HiPIMS) deposition of B 4 C in pure Ar and mixed Ar-Ne plasmas. Here, the results show that higher plasma discharge currents can be reached with a mixed Ar-Ne plasma in the entire working pressure range studied (5 𝑡𝑜 50 mTorr). At 45 mTorr with 10% of Ne in the Ar-Ne mix, high peak target current densities of ~1 A cm −2 were demonstrated. Films deposited with such a mixed Ar-Ne plasma with a full-face erosion magnetron source on substrates biased at −25 V exhibited higher density and improved mechanical properties, albeit with higher compressive residual stresses compared to the case of HiPIMS deposition in a pure Ar plasma. This work demonstrates additional process flexibility of the HiPIMS discharge mode for the deposition of B 4 C coatings.

Ablator capsule↗
DOE OSTI2025

High-Rate Sputter Deposition of Ultrathick Boron Carbide Coatings on Rolling Spherical Substrates

Amorphous boron carbide (B 4 C) is a promising next-generation ablator material for inertial confinement fusion. However, the deposition of ultrathick B4C coatings with submicron-scale density uniformity on spherical substrates, as required for ablator shell fabrication, remains challenging. Here, in this study, we use direct current magnetron sputtering to deposit B 4 C onto 2-mm-diameter Si spheres rolling in a dish-shaped substrate holder. High deposition rates of ∼3 μm/h are achieved. Ultrathick films have a columnar microstructure, with the column width determined by the density of nodular defects. Nodular defect nucleation is dominated by the pickup of particulates from the holder during substrate rolling. We demonstrate the fabrication of a hollow B 4 C spherical shell with a wall thickness of 80 μm. Also demonstrated is the laser machining of holes in the B 4 C coating, which is necessary for both the chemical removal of the Si template and the attachment of a fusion fuel fill tube.

Inertial confinement fusion targets↗
DOE OSTI2025

Single-shot in-line x-ray phase-contrast imaging of void-shockwave interactions in fusion energy materials

Recent breakthroughs in nuclear fusion, specifically the report of reactions exceeding scientific breakeven at the National Ignition Facility (NIF), highlight the potential of inertial fusion energy (IFE) as a sustainable and virtually limitless energy source. However, further progress in IFE requires characterization of defects in ablator materials and how they affect fuel capsule compression. Voids within the ablator can degrade energy yield, but their impact on the density distribution has primarily been studied through simulations, with limited high-resolution experimental validation. To address this, we used the x-ray free-electron laser (XFEL) at the matter in extreme conditions (MECs) instrument at the Linac coherent light source (LCLS) to capture 2D x-ray phase-contrast (XPC) images of a void-bearing sample with a composition similar to inertial confinement fusion (ICF) ablators. By driving a compressive shockwave through the sample using MEC's long-pulse laser system, we analyzed how voids influence shockwave propagation and density distribution during compression. To quantify this impact, we extracted phase information using two phase retrieval algorithms. First, we applied the contrast transfer function (CTF) method, paired with Tikhonov regularization and a fast optimization approach to generate an initial phase estimate. We then refined the result using a projected gradient descent (PGD) method that works directly with the sample's refractive index. Comparing these results with radiation adaptive grid Eulerian (xRAGE) radiation hydrodynamic simulations enables identification of model validation needs or improvements. By calculating phase maps in situ, it becomes possible to reconstruct areal density maps, improving understanding of laser-capsule interactions and advancing IFE research.

Hodge, D. S. [Colorado State Univ., Fort Collins, ↗
DOE OSTI2025

Demonstration of a Novel Radiochemical Mix Diagnostic for Fusion Implosions at the National Ignition Facility

Mixing of the ablator material into the fuel of an inertial confinement fusion implosion reduces compression and enhances radiative losses, preventing ignition. Here, we describe a novel use of charged-particle radiochemistry to measure the ablator mix in contact with the fusion hot spot. The capsule uses a graded Be-Cr layer to increase the confinement of the hot spot. 52 Mn and 51 Cr isotopes are collected from the implosion and counted, and the ratio is related to the amount of Cr mixed into the hot spot. Thus, a new diagnostic to determine the degradation due to mix on fusion implosions has been developed.

MacLaren, S. A. [Lawrence Livermore National Labor↗
DOE OSTI2024

Modeling ablator defects as a source of mix in high-performance implosions at the National Ignition Facility

Recent indirect drive inertial confinement fusion implosions on the National Ignition Facility (NIF) [Spaeth et al., Fusion Sci. Technol. 69, 25 (2016)] have crossed the threshold of ignition. However, performance has been variable due to several factors. One of the leading sources of variability is the quality of the high-density carbon (HDC) shells used as ablators in these experiments. In particular, these shells can have a number of defects that have been found to correlate with the appearance of ablator mix into the hot spot and a degradation in nuclear yield. These defects include pits on the ablator surface, voids in the ablator bulk, high-Z debris from the Hohlraum wall that adheres to the capsule surface, and finally the inherent granular micro-structure of the crystalline HDC itself. This paper summarizes high-resolution modeling of each of these mix sources in two recent high-performance NIF implosion experiments. The simulated impact from a range of individual capsule defects is found to be broadly consistent with the trends seen in experiment, lending credence to the modeling results and the details of the mixing process that they reveal. Interestingly, modeling of the micro-structure inherent to HDC shows that this perturbation source results in considerable mixing of the deuterium–tritium fuel with ablator material during the implosion. The reduction in fuel compression from this mix results in an approximately factor of two reduction in neutron yield in current implosions and emphasizes the importance of mitigating this significant performance degradation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Microphysics of shock-grain interaction for inertial confinement fusion ablators in a fluid approach

Ablator materials used for inertial confinement fusion, such as high-density carbon (HDC) and beryllium, have grain structure which may lead to small-scale density nonuniformity and the generation of perturbations when the materials are shocked and compressed. Here, we use a combination of a linear theory of shock interaction with density nonuniformity [Velikovich et al., Phys. Plasmas 14, 072706 (2007)] and numerical simulations to study shock interaction with a model representation of HDC grains. While the shock-grain interaction is nonlinear, the linear theory shows some key features of the shock-grain interaction, which also hold for the (nonlinear) simulations. The postshock perturbations are made up of sonic reflections off of grain boundaries and vorticity deposition along them, with the latter dominating the perturbed energy content. The mean (per mass) postshock perturbed kinetic energy decreases with increasing grain size, but energy will be deposited at increasing spatial scale. From the perspective of the postshock perturbed energy, the detailed linear theory largely supports a proposed method [S. Davidovits et al., Phys. Plasmas 29, 112708 (2022)] for deresolving the grains (in a similar grains model) that treats the grains statistically. Finally, our simulation results highlight the influence of thermal conduction on the perturbation dynamics at grain scales.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Improving indirect-drive ablator performance through pulse shaping and material selection in double shell implosions

The double shell path to inertially confined volumetric thermonuclear burn relies on efficient kinetic energy transfer from an outer ablator shell to an inner shell containing DT fuel at implosion velocities near 250 km/s. In order to experimentally realize adequate compression, target imperfections and assembly features must be tightly controlled. Pulse shape and ablator material are critical design choices that impact all aspects of the implosion. In this article, we evaluate three designs: an Al ablator with single-shock radiation drive, a CH ablator with single-shock drive, and a CH ablator with reduced-adiabat 2-shock drive. All designs use the same W inner (pusher) shell overcoated with a glow discharge polymer tamper and filled with liquid-density DT. One-dimensional HYDRA simulations revealed that the plastic ablator design required the use of the 2-shock drive to match the performance of the Al design. Two-dimensional simulations resolving broadband surface roughness up to modes of several hundred placed only on the ablator showed plastic to greatly outperform Al. The plastic ablator designs did exhibit higher levels of inner shell instability growth when surface roughness was only placed at the pusher/tamper interface, which was mitigated with higher foam cushion densities. A unique and additional benefit of a plastic ablator is also discussed, where heating of the ablator by Au M-band radiation is predicted to rapidly expand the hemi-shell surfaces, closing the equatorial joint gap ahead of the first shock. Taken together, the properties of the plastic ablator for indirect-drive double shell implosions appear promising in removing several long-standing fabrication challenges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Sample glue layer investigation and mitigation for laser induced prompt impulse experiments

Understanding longer timescale material reactions under dynamic stress loading is critical for applications in materials engineering, shock physics, and planetary science. Prompt impulse experiments generate lower pressures since the ablator—the material first removed by the laser—is thicker and farther from the diagnostic plane, capturing aggregate material responses from the initial shock wave, rarefaction waves, and later time effects. This complexity demands thorough material characterization and simulation support. Since traditional sample construction is specific to supported shock experiments, designing prompt impulse experiments requires reconsideration around target design and sample engineering. Here, we present sample preparation techniques, experimental investigations, and theoretical simulations to investigate glue layer impacts, aiming to standardize samples for consistent data at lower laser fluences. We find that glue layers <30 μm have a minimal impact on peak velocity and pulse shape. The peak velocity scales linearly with glue layer thickness until a glue layer of 75 μm. For glue layers >75 μm, the peak velocity no longer scales with thickness; however, the pulse shape continues to degrade as described by simulations.

Lasers↗
DOE OSTI2024

History and State of the Art in Advanced Thermal Protection Systems

This report documents the current state of the art of thermal protection systems (TPS) relevant to missile application materials and MTCR control language. The information is intended to provide data on current TPS for determining the current state of development and identifying potential research directions. Various vehicle configurations and types of TPS are described, including the evolution of materials and systems. Vehicle configurations such as high drag rocket and capsule systems and low-drag air-breathers are discussed. TPS are complex, transitioning from often very low temperatures to temperatures exceeding 3000°C and heat fluxes of up to 30,000 W/cm 2 . They can take the form of blankets, sheets, tiles and fabricated rigid structures, and can be made from high temperature capable alloys, refractory metals, ceramics, ceramic matrix composites, ultra-high temperature ceramics, carbon-carbon composites or ablative carbonaceous materials. Current state of the art in TPS is based on materials any systems developed for the initial space program. TPS was upgraded to the point of the Space Shuttle development and has stagnated since them.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Parallel expansion of a fuel pellet plasmoid

The problem of the assimilation of a cryogenic fuel pellet injected into a hot plasma is considered. Due to the transparency to ambient particles of the plasmoid, the localised region of high-density plasma created by ionisation of the ablated pellet material, electrons reach a ‘quasiequilibrium’ (QE) state which is characterised by a steady-state on the fastest collisional time scale. The simplified electron kinetic equation of the QE state is solved. Taking a velocity moment of the higher-order electron kinetic equation, which is valid on the expansion time scale, permits a fluid closure, yielding an evolution equation for the macroscopic parameters describing the QE distribution function. In contrast to the Braginskii equations, the closure does not require that electrons have a short mean free path compared with the size of density perturbations, and permits an anisotropic and highly non-Maxwellian distribution function. As the QE distribution function accounts for both trapped and passing electrons, the self-consistent electric potential that causes the expansion can be properly described, in contrast to earlier models of pellet plasmoid expansion with an unbounded potential. The plasmoid expansion is simulated using both a Vlasov model and a cold-fluid model for the ions. During the expansion plasmoid ions and electrons obtain nearly equal amounts of energy; as hot ambient electrons provide this energy in the form of collisional heating of plasmoid electrons, the expansion of a pellet plasmoid is expected to be a potent mechanism for the transfer of energy from electrons to ions on a time scale shorter than that of ion–electron thermalisation.

Physics↗
DOE OSTI2026

Calibration-free analysis of Li isotope ratios using laser ablation and laser absorption spectroscopy

We introduce a rapid, calibration-free, all-optical method for high-precision lithium isotope ratio measurements in solid materials using laser ablation combined with tunable laser absorption spectroscopy. A new asynchronous acquisition method is used to acquire time-resolved, high-resolution spectra of the 6Li and 7Li D1 and D2 transitions near 671 nm. Isotope ratios and atomic column densities are extracted from measured spectra via a physics-based fitting model including hyperfine structure. Under 1 Torr air, spectra recorded = 0.75 ms after plasma onset exhibit narrow linewidths corresponding to Doppler temperatures = 400 K, enabling resolution of the isotope peaks with high signal-to-noise ratios. Analysis of LiAlO2 samples with varying 6Li:7Li ratios demonstrates isotopic precisions of 0.6–1.7% for spectra acquired in 30 s. Isotope ratios determined from the spectral fits show accuracy within –0.3% to –1.7% of reference ICP-MS measurements without requiring calibration to external standards. By eliminating sample preparation and enabling spatially resolved isotopic mapping, this method offers a rapid analysis approach to lithium isotope determination in solid materials relevant to nuclear energy, safeguards, and geochemistry.

Phillips, Mark C.↗
DOE OSTI2025

Towards Portable Laser Desorption Postionization Mass Spectrometry Utilizing Microchip Laser Pulses

A 355 nm, 1.5 ns, up to 1 kHz microchip laser system has been tested to both yield ablation spots and postionize material within a plasma plume. A 30 µJ pulse energy microchip laser successfully ablated all samples: 6601 aluminum, 316 and 304 stainless steel, and Mo metal. While visible ablation craters were observed on all samples mentioned above, the stainless-steel samples displayed visible color changes in the resolidified iron, indicating ionization with the 355 nm pulses during ablation. Additionally, when used to intercept a plasma plume of Cs 2 CO 3 made with a separate laser system, the microchip laser pulses yielded Cs + emission signal otherwise not observed. With these experiments completed, the microchip laser has been successfully verified for readiness to be integrated into the front end of a mass spectrometer system as the ion source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗