SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Synthesis technique for active filters gives high degree of accuracy for frequencies as high as 500 kHz and covers frequencies most used for telemetry. Frequency response can be realized within few percent of specified cutoff frequencies without need for tuning.
Multiplier units of the modified Booth decoder and carry-save adder/full adder combination are used to implement a pipeline active filter wherein pixel data is processed sequentially, and each pixel need only be accessed once and multiplied by a predetermined number of weights simultaneously, one multiplier unit for each weight. Each multiplier unit uses only one row of carry-save adders, and the results are shifted to less significant multiplier positions and one row of full adders to add the carry to the sum in order to provide the correct binary number for the product Wp. The full adder is also used to add this product Wp to the sum of products .SIGMA.Wp from preceding multiply units. If m.times.m multiplier units are pipelined, the system would be capable of processing a kernel array of m.times.m weighting factors.
High Q micropower filters for VHF applications based on conditionally stable negative resistance operation, describing computer-aided design, construction and performance
It is shown that node (or loop) matrix equations can be written which yield second order low-pass, band-pass, and high-pass network functions. Networks corresponding to the equations can in turn be formulated by inspection of the equations. The networks employ ideal VCT or CVT sources which can be physically realized using transistors and/or operational amplifiers. The technique yields several structures which are believed to be new.
The design of filters is described. Emphasis is placed on simplified procedures that can be used by the reader who has minimum knowledge about circuit design and little acquaintance with filter theory. The handbook has three main parts. The first part is a review of some information that is essential for work with filters. The second part includes design information for specific types of filter circuitry and describes simple procedures for obtaining the component values for a filter that will have a desired set of characteristics. Pertinent information relating to actual performance is given. The third part (appendix) is a review of certain topics in filter theory and is intended to provide some basic understanding of how filters are designed.
Distributed active RC filters design for low pass, bandpass and biquadratic network functions, including charts for element values determination
Active and passive multiplication of RC time constants for subaudio frequency integrated filters
Phase change material (PCM)-based actively tunable mid-wave IR filters have broad imaging and sensing applications—from probing molecular vibrations in chemical species to detecting radiant thermal signatures. We introduce the Phase-change actively tunable filter (P-ACTIVE) project lead by NASA Langley Research Center with collaborators MIT and the University of Cambridge. It covers background science, experimental and theoretical device performance, as well as recent results obtained from a MISSE-14 mission for space qualification of active metasurface optics and constituent PCM. We conclude with a prospective view of the technology and discuss the potential for these filters to serve multiple NASA missions.
Active magnetic bearings can be implemented with frequency band-reject filtering that decreases the bearing stiffness and damping at a small bandwidth around a chosen frequency. The control scheme was used for reducing a rotor dynamic force, such as an imbalance force, transmitted to the bearing stator. The scheme creates additional system vibration modes at the same frequency. It also shows that the amount of force reduction is limited by the stability requirement of these modes.
An active notch filter having independently adjustable notch frequency, width, and depth is provided by three equal capacitors connected in series with an operational amplifier (connected in a voltage follower configuration), a potentiometer across the series connected capacitors for notch depth adjustment, and a potentiometer (for notch frequency connected across the center capacitor); with its tap connected to receive a voltage feedback signal from a variable voltage divider comprised of another potentiometer for notch width. Adjusting the voltage dividing potentiometer will independently set the notch width, and adjusting the tap on the potentiometer across the center capacitor will independently adjust the notch frequency of the filter. A second operational amplifier connected in a voltage follower configuration may be used to connect the voltage divider output to the adjustable tap of the potentiometer across the center capacitor.
The results are presented of upgrading and testing an integrated water and waste management system, which uses the compression distillation, reverse osmosis, adsorption filtration and ion-exchange processes to recover potable water from urine, flush water and used wash water. Also included is the development of techniques for extending the useful biological life of biological filters, activated carbon filters and ion-exchange resins to at least 30 days, and presterilizing ion-exchange resins so that sterile water can be recovered from waste water. A wide variety of reverse osmosos materials, surfactants and germicides were experimentally evaluated to determine the best combination for a wash water subsystem. Full-scale module tests with real wash water demonstrated that surface fouling is a major problem.
The performance of suppressed carrier receivers with Costas loop tracking is optimized by proper choice of loop arm filter bandwidth. In particular, it is shown that for a variety of passive arm filter types, there exists, for a given data rate and data signal-to-noise ratio, an optimum filter bandwidth in the sense of minimizing the loop's squaring loss. For the linear theory case, this is equivalent to minimizing the loop's tracking jitter. When symbol synchronization is known, it is shown that by replacing the passive arm filters with active filters, i.e., integrate-and-dump circuits, one can achieve an improvement in carrier-to-noise ratio of as much as 4 to 6 dB depending on the passive arm filter type used for comparison and the value of data signal-to-noise ratio.
In a Costas loop study for biphase modulation conducted by Simon and Lindsey (1977), it was demonstrated that considerable improvement in tracking performance could be obtained by employing active arm filters of the integrate-and-dump type as opposed to passive arm filters. An investigation is conducted concerning the possibility to obtain a similar performance improvement for an unbalanced quadriphase-shift-keying (QPSK) modulation. It is found that the biphase Costas loop can be used as an efficient demodulator of QPSK in cases in which the ratio of data rates is of the same order of magnitude as the inverse of the power ratio. These cases involve approximately equal signal energies in the two channels.
The problem of achieving near unity power factor while supplying power to a dc load from a single phase ac source of power is examined. Power processors for this application must perform three functions: input current shaping, energy storage, and output voltage regulation. The methods available for performing each of these three functions are reviewed. Input current shaping methods are either active or passive, with the active methods divided into buck-like and boost-like techniques. In addition to large reactances, energy storage methods include resonant filters, active filters, and active storage schemes. Fast voltage regulation can be achieved by post regulation or by supplementing the current shaping topology with an extra switch. Some indications of which methods are best suited for particular applications concludes the discussion.
Dc to dc static power conditioning systems on unmanned spacecraft have as their inputs highly fluctuating dc voltages which they condition to regulated dc voltages. These input voltages may be less than or greater than the desired regulated voltages. The design of two circuits which address specific problems in the design of these power conditioning systems and a nonlinear analysis of one of the circuits are discussed. The first circuit design is for a nondissipative active ripple filter which uses an operational amplifier to amplify and cancel the sensed ripple voltage. A dc to dc converter operating at a switching frequency of 1 MHz is the second circuit discussed. A nonlinear analysis of the type of dc to dc converter utilized in designing the 1 MHz converter is included.
Solar activity predictions using the data assimilation approach have demonstrated great potential to build reliable long-term forecasts of solar activity. In particular, it has been shown that the Ensemble Kalman Filter (EnKF) method applied to a non-linear dynamo model is capable of predicting solar activity up to one sunspot cycle ahead in time, as well as estimating the properties of the next cycle a few years before it begins. These developments assume an empirical relationship between the mean toroidal magnetic field flux and the sunspot number. Estimated from the sunspot number series, variations of the toroidal field have been used to assimilate the data into the Parker-Kleeorin-Ruzmakin (PKR) dynamo model by applying the EnKF method. The dynamo model describes the evolution of the toroidal and poloidal components of the magnetic field and the magnetic helicity. Full-disk magnetograms provide more accurate and complete input data by constraining both the toroidal and poloidal global field components, but these data are available only for the last four solar cycles. In this presentation, using the available magnetogram data, we discuss development of the methodology and forecast quality criteria (including forecast uncertainties and sources of errors). We demonstrate the influence of limited time series observations on the accuracy of solar activity predictions. We present EnKF predictions of the upcoming Solar Cycle 25 based on both the sunspot number series and observed magnetic fields and discuss the uncertainties and potential of the data assimilation approach.
In the design of flight control systems for large flexible boosters, it is common practice to utilize active feedback control of the first lateral structural bending mode so as to suppress transients and reduce gust loading. Typically, active stabilization or phase stabilization is achieved by carefully shaping the loop transfer function in the frequency domain via the use of compensating filters combined with the frequency response characteristics of the nozzle/actuator system. In this paper we present a new approach for parameterizing and determining optimal low-order recursive linear digital filters so as to satisfy phase shaping constraints for bending and sloshing dynamics while simultaneously maximizing attenuation in other frequency bands of interest, e.g. near higher frequency parasitic structural modes. By parameterizing the filter directly in the z-plane with certain restrictions, the search space of candidate filter designs that satisfy the constraints is restricted to stable, minimum phase recursive low-pass filters with well-conditioned coefficients. Combined with optimal output feedback blending from multiple rate gyros, the present approach enables rapid and robust parametrization of autopilot bending filters to attain flight control performance objectives. Numerical results are presented that illustrate the application of the present technique to the development of rate gyro filters for an exploration-class multi-engined space launch vehicle.
Passive RC network was designed with zeros of transmission in the right half of the complex frequency plane in the feedback loop of a simple negative-gain amplifier. The proper positioning provides any desired trade-off between amplifier gain and sensitivity to amplifier gain.