Results for “advanced aerial mobility (AAM)”

NASA NTRS2024

Presound: UAV Diagnostic System Enabled by Vibration-Based Machine Learning

A low-weight, inexpensive small unmanned aerial system (sUAS) that takes off, performs a mission, lands, and safely stows and recharges itself has myriad future applications ranging from agricultural imaging to last-mile package delivery. Likewise, Urban Air Mobility (UAM) systems will enable people to take air taxis from point to point in cities, rapidly moving commuters long distances without concern for road traffic and congestion. Fully electric aviation systems will be cleaner and quieter than ground transport. Cities could eliminate cars and buses, and convert roads to higher capacity bike and pedestrian throughways. Yet, for sUAS as well as UAM, system reliability and assurance is a limiting factor to deploying affordable autonomous flight systems. For this bright future of aviation to be realized, aircraft must be able to autonomously and accurately self-diagnose health issues both before takeoff and during flight. The GreenSight PreSound system is designed to identify defects on aircraft through intelligent analysis of vibration. It accomplishes this by measuring structural vibrations induced by the vehicle’s own propellers, and analyzing that data using a machine learning model that determines whether a defect is present. The PreSound system is designed to require no human oversight, and to operate across a wide array of vehicles through re-training of the model for each target aircraft. PreSound has been developed and seen limited early success using data collected from the GreenSight Dreamer sUAS, a 5lb quadrotor vehicle designed for aerial imaging applications. The final detection model, trained on data with props spinning at 50% throttle, achieves excellent performance with over 99% average accuracy in detecting blade damage using a single FFT vector input. It demonstrates the ability to generalize to new types of blade damage, correctly classifying a different type of blade damage with 98% accuracy. Full test pulses were classified with 100% accuracy, and in live testing, all sets of data during blade movement were classified accurately with over 95% confidence. When trained on in-flight data, the same model achieves an average accuracy of 85% in distinguishing between undamaged and blade-damaged states in flight. The authors believe that these accuracies show significant potential of this approach to expand unmanned flight safety, with significant potential benefits in accelerating Advanced Aerial Mobility (AAM) and UAM aviation applications.

UAS↗

NASA NTRSDate not supplied

A HIRF-Map Certification Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in airspace similar to Transport Category Rotorcraft, requiring them to meet stringent requirements for High-Intensity Radiated Fields (HIRF) certification. The environment is notably severe, particularly compared to fixed-wing aircraft, due to operations at lower altitudes. This potentially exposes the vehicles to high-power transmitters on the ground, leading to significant challenges. High-level HIRF exposure can result in avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF pose significant barriers concerning size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel HIRF protection approach, aiming to reduce costs by certifying vehicles to a "vehicle tolerance level" lower than that required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources. This distance is calculated based on the vehicle's tolerance level and transmitter characteristics, such as transmit power, antenna beamwidth, and direction. Tailored flight maps are developed to identify transmitters and avoidance zones within an operating area or along a flight path, enabling restricted vehicle operations. Vehicles with higher tolerance levels could have smaller HIRF avoidance zones, allowing them to operate closer to transmitters. Transmitter data are sourced from government databases, such as those of the Federal Communications Commission (FCC) and the National Oceanic and Atmospheric Administration (NOAA). A map tool is developed using Matlab to calculate and visualize HIRF avoidance zones based on available databases. The tool determines stand-off distances based on input vehicle tolerance levels, displaying results on various base maps depicting HIRF-restricted areas. Illustrations cover various FCC transmitters, including AM/FM/TV transmitters, satellite earth stations, and NOAA weather radars. The HIRF zones of smaller transmitters, such as land-mobile radios, pagers, microwave links, and cellular towers, are also illustrated. An example of flight planning around transmitters is provided. For now, airports and government-owned lands are excluded due to limited access to sensitive transmitter data. Despite this approach, a minimum HIRF tolerance level for vehicles may still be necessary to cover mobile devices, cellular base stations, transmitters on other AAM vehicles, and other small power devices not included in the FCC databases. The paper discusses findings and areas for improving existing databases and suggests an approach for better access to sanitized data in more restricted government databases. This method significantly deviates from the standard approach and introduces slightly higher flight-planning complexity. However, the potential cost savings are considerable. Future AAM/UAM/UAS aeronautical charts could potentially incorporate these new HIRF avoidance zones. Keywords—HIRF; Map; AAM; UAM; UAS; Advanced Air Mobility; Urban Air Mobility; Unmanned Aerial Systems; Certification.

HIRF↗

NASA NTRSDate not supplied

Foundational Human-Autonomy Teaming Research and Development in Scalable Remotely Operated Advanced Air Mobility Operations: Research Model and Initial Work

To achieve the scalability envisioned for many Advanced Air Mobility (AAM) applications, uncrewed aerial system (UAS) concepts are being pursued with the goal of enabling fewer human operators to manage more increasingly autonomous vehicles. NASA’s Transformational Tools and Technologies – Revolutionary Aviation Mobility (T3-RAM) subproject has identified human-autonomy teaming (HAT) as a critical area of research required to support these operations. Under T3-RAM, the HAT Foundational Research Activity has been tasked with providing basic research to identify HAT and human-automation interaction (HAI) principles that can be used to achieve scalable multi-vehicle UAS operations. This paper first outlines a research model to produce ecologically relevant basic research, then contextualizes completed and planned research and development activities within this model. Proposed research threads are presented, along with their practical and theoretical implications.

Human-Autonomy Teaming↗

NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for HighIntensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗

NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for High Intensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗

NASA NTRS2021

Secure and Safe Assured Autonomy (S2A2)

Aviation’s future will likely see the integration of a wide variety of Advanced Air Mobility (AAM) systems including Unmanned Aerial Systems (UAS) for cargo/delivery, personal air vehicles, and commercial Urban Air Mobility (UAM)vehicles. However, substantial challenges exist that could delay (and possibly prevent) these developments and thus research is needed in a variety of areas to leverage technologies in autonomy, Air Traffic Management (ATM), multi-redundant flight systems architectures, and advanced wireless connectivity like 5G to meet these challenges. The goal of this ULI project is to develop new technologies and innovative operational concepts which will ensure safe, secure and robust integration of autonomous vehicles into Advanced Air Mobility-tailored transportation infrastructure. All this must be done while maintaining inter-operability with current civil air transportation systems and associated safety standards. The project is organized into four Technical Challenges (TCs) areas designed to provide unique UAM solutions and a transition roadmap for industry and government to utilize research product output.

Koushik Datta↗

NASA NTRSDate not supplied

A Proposed Taxonomy for Advanced Air Mobility

There has been a large growth in interest of utilizing new technologies—most notably electrified propulsion and automation—as well as new business models to bring aviation services into the daily lives of a greater segment of society. Generally, these services are envisioned to augment existing ground modes of transportation or to enable new operating capabilities for shorter-range aviation missions. These services, which have become known as advanced air mobility (AAM), include passenger transportation, cargo transportation, and aerial work missions, such as aerial photography. In this paper we describe advanced air mobility and provide a framework based on demand and supply concepts that can be used for developing a taxonomy for AAM with a focus on passenger applications. This taxonomy is intended to facilitate the nascent AAM stakeholder community in adopting a common terminology and to enable better coordination among disparate AAM research and development activities.

advanced air mobility↗

NASA NTRSDate not supplied

HIRF Tolerance and Avoidance for Advanced Air Mobility Vehicles

Advanced Air Mobility (AAM), including Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles may fly in similar airspace to Transport Category Rotorcraft, thereby requiring meeting the same stringent High-Intensity Radiated Fields (HIRF) certification requirements. In a previous effort, a proposed map-based approach protects a vehicle by keeping it away from high power sources at safe distances based on its tolerance level. By designing to a lower tolerance level, significant cost savings can be achieved at the cost of slightly more complex flight planning. However, too low a threshold can result in large avoidance areas, potentially reducing the vehicle operating space. This current effort suggests a minimum threshold for vehicles operating in an urban area. It is derived from analyzing regulatory transmitter data for New York City as a representative metropolitan. As a result, a vehicle can tolerate common lower-power transmitters by default and only needs to avoid far less common high-power sources. It is also found the existing HIRF requirements may be insufficient against many powerful transmitters such as weather radars and satellite uplink transmitters, and that the map-based approach can address this concern.

HIRF↗

NASA NTRSDate not supplied

HIRF Tolerance and Avoidance for Advanced Air Mobility Vehicles

Advanced Air Mobility (AAM), including Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles may fly in similar airspace to Transport Category Rotorcraft, thereby requiring meeting the same stringent High-Intensity Radiated Fields (HIRF) certification requirements. In a previous effort, a proposed map-based approach protects a vehicle by keeping it away from high power sources at safe distances based on its tolerance level. By designing to a lower tolerance level, significant cost savings can be achieved at the cost of slightly more complex flight planning. However, too low a threshold can result in large avoidance areas, potentially reducing the vehicle operating space. This current effort suggests a minimum threshold for vehicles operating in an urban area. It is derived from analyzing regulatory transmitter data for New York City as a representative metropolitan area. As a result, a vehicle can tolerate common lower-power transmitters by default and only needs to avoid far less common high-power sources. It is also found the existing HIRF requirements may be insufficient against many powerful transmitters such as weather radars and satellite uplink transmitters, and that the map-based approach can address this concern.

HIRF↗

NASA NTRSDate not supplied

A Preliminary Development of The Intelligent Change Detection System (ICDS): Using Machine Learning to Combat Change Blindness in Remote Operation Environments

The emergence of Advance Air Mobility (AAM) will increase the number and types of aerial vehicles operating in shared airspaces, which will subsequently affect the amount of actionable data that ground control station operators (GCSOs) will be expected to manage. In this environment, GCSOs are particularly susceptible to the visual perceptual phenomenon known as change blindness, in which a stimulus undergoes a change without the change being noticed by its observer. A machine agent designed to detect change blindness and mitigate the effects could improve human agent performance in a data-saturated remote operations environment. The objective of this paper is to describe a proof-of-concept system architecture that integrates real-time eye tracking and vehicle telemetry data to prevent human-agent errors resulting from change blindness while operating aircraft from a remote ground control station (GCS).

Real-Time Streaming Data Architecture↗

NASA NTRSDate not supplied

A Preliminary Development of The Intelligent Change Detection System (ICDS): Using Machine Learning to Combat Change Blindness in Remote Operation Environments

The emergence of Advance Air Mobility (AAM) will increase the number and types of aerial vehicles operating in shared airspaces, which will subsequently affect the amount of actionable data that ground control station operators (GCSOs) will be expected to manage. In this environment, GCSOs are particularly susceptible to the visual perceptual phenomenon known as change blindness, in which a stimulus undergoes a change without the change being noticed by its observer. A machine agent designed to detect change blindness and mitigate the effects could improve human agent performance in a data-saturated remote operations environment. The objective of this paper is to describe a proof-of-concept system architecture that integrates real-time eye tracking and vehicle telemetry data to prevent human-agent errors resulting from change blindness while operating aircraft from a remote ground control station (GCS).

Real-Time Streaming Data Architecture↗

NASA NTRSDate not supplied

Investigation of Intelligent Resource Management for Aviation Communications

The emergence of new aerial vehicles into the airspace as part of new initiatives, such as Advanced Air Mobility (AAM), will place growing demand for spectrum resources to support airspace operations. The traditional approach of using fixed channel allocations within standard service volumes will not allow for dynamic and efficient distribution of resources based on airspace demand; consequently, a new approach to aviation spectrum management will be required to meet the anticipated needs of airspace users. The National Aeronautics and Space Administration (NASA) is investigating the application of advanced concepts to implement a novel spectrum management approach that allows for the intelligent utilization of aviation spectrum throughout the airspace while maintaining the quality of service prescribed by aeronautical standards. This technical investigation evaluates the dynamic assignment of resources for both air-ground and air-air communication links applicable to both the emerging AAM initiative as well as the existing air traffic management system. The performance of the proposed spectrum management concepts will be evaluated using a custom modeling and simulation capability that is currently under development. The implementation of these approaches is anticipated to facilitate increased spectrum utilization efficiency and enhanced airspace capacity, which will better serve the needs of future applications.

Aeronautics↗

NASA NTRSDate not supplied

Investigation of Intelligent Resource Management for Aviation Communications

The emergence of new aerial vehicles into the airspace as part of new initiatives, such as Advanced Air Mobility (AAM), will place growing demand for spectrum resources to support airspace operations. The traditional approach of using fixed channel allocations within standard service volumes will not allow for dynamic and efficient distribution of resources based on airspace demand; consequently, a new approach to aviation spectrum management will be required to meet the anticipated needs of airspace users. The National Aeronautics and Space Administration (NASA) is investigating the application of advanced concepts to implement a novel spectrum management approach that allows for the intelligent utilization of aviation spectrum throughout the airspace while maintaining the quality of service prescribed by aeronautical standards. This technical investigation evaluates the dynamic assignment of resources for both air-ground and air-air communication links applicable to both the emerging AAM initiative as well as the existing air traffic management system. The performance of the proposed spectrum management concepts will be evaluated using a custom modeling and simulation capability that is currently under development. The implementation of these approaches is anticipated to facilitate increased spectrum utilization efficiency and enhanced airspace capacity, which will better serve the needs of future applications.

Eric Knoblock↗

NASA NTRSDate not supplied

High Density Vertiplex: Scalable Autonomous Operations Prototype Assessment Simulation

Urban Air Mobility (UAM) is a rapidly growing topic within the field of aviation because of the impact a refined ecosystem and uncrewed aerial vehicles could have on modern society, such as urban air mobility, cargo, and emergency transport. Before the UAM concept can be actualized, research is needed to understand how to integrate these new classes of vehicles and operations into the National Airspace System. One under-researched but critical piece of infrastructure required for UAM operations is Vertiport operations. Vertiports are the envisioned takeoff and landing locations for these uncrewed aerial vehicles. To accommodate the high use of the vertiport, new technologies and roles will be required for optimal use. At NASA, the High Density Vertiplex sub-project targets research into vertiports. The High Density Vertiplex team created an Urban Air Mobility ecosystem to test and evaluate different concepts and tools used to support higher density operations at vertiports. Part of the test and evaluation included the Prototype Assessment Operations simulation of highdensity operations around a vertiport to study vertiport management and vertiport operations. The research team also evaluated how the prototype Urban Air Mobility ecosystem supported fleet managers, ground control station operators, and vertiport managers in execution of nominal and off-nominal high-density operations. Results from this simulation provided insight regarding UAM ecosystem research and development and vertiport automation systems.

Small Uncrewed Aerial Vehicle (sUAS)↗

NASA NTRSDate not supplied

High Density Vertiplex: Scalable Autonomous Operations Prototype Assessment Simulation

Urban Air Mobility is a rapidly growing topic within the field of aviation because of the impact a refined ecosystem and uncrewed aerial vehicles could have on modern society, such as urban air, cargo, and emergency transport. Before the UAM concept can be actualized, research is needed to understand how to integrate these new classes of vehicles and operations into the National Airspace System. One under-researched but critical piece of infrastructure required for UAM operations is Vertiport operations. Vertiports are the envisioned takeoff and landing locations for these uncrewed aerial vehicles. To accommodate the high use of the vertiport, new technologies and roles will be required for optimal use. At NASA, the High Density Vertiplex sub-project targets research into vertiports. The High Density Vertiplex team created their own Advanced Air Mobility ecosystem to test and evaluate different concepts and tools used to support higher density operations at vertiports. Part of the test and evaluation included the Prototype Assessment Operations simulation of high-density operations around a vertiport to study vertiport management and vertiport operations. The research team also evaluated how their simulated Urban Air Mobility ecosystem supported fleet managers, ground control station operators, and vertiport managers in execution of nominal and off-nominal high-density operations. Takeaways from this simulation helped the team evaluate well how the users of the ecosystem were able to use the components of the ecosystem to complete Urban Air Mobility missions.

Small Uncrewed Aerial Vehicle (sUAS)↗

NASA NTRS2022

DataSet: Aerial Object Trajectory Classification by Training on Flight Controller Data and Testing on RADAR Generated

Onboard collision avoidance is needed to enable safe, autonomous flight operations for NASA projects such as Advanced Air Mobility (AAM), as well as many commercial applications. Real-time aerial object classification will improve onboard collision avoidance algorithm decision making and may reduce unnecessary activation of avoidance systems. This work trains an aircraft trajectory classifier using trajectories from flight controller logs and tests the classifier using RADAR collected trajectories during air to air experiments and ground to air experiments. In contrast to RADAR data, these flight controller logs are relatively abundant, which makes the possibility of substituting flight data for RADAR data an attractive, cost-effective option. The SVM model developed in this work achieved a 79.7% classification accuracy on the first second of radar trajectories of GA, multirotor sUAS, and fixed wing sUAS. Findings from this e that it is feasible to classify sensor collected trajectories using a classifier trained flight controller data.

Chester V Dolph↗

NASA NTRSDate not supplied

Dynamic Spectrum Allocation in Urban Air Transportation System via Deep Reinforcement Learning

The emerging concepts of Urban Air Mobility (UAM) and Advanced Air Mobility (AAM) open a new paradigm for urban air transportation. A big challenge is that these new aerial vehicles will quickly saturate the already crowded aviation spectrum, which is an essential resource to ensure reliable communications for safe operations. In this paper, we consider an air transportation system where multiple aerial vehicles are operated to transport passengers or cargo from different sources to destinations along their pre-defined paths. During the flight, the minimum communication Quality of Service (QoS) requirement must be achieved to ensure flight safety. Our objective is to minimize the average mission completion time by jointly optimizing the velocity selection and spectrum allocation for all aerial vehicles. We formulate the optimization problem as a multi-stage Markov Decision Process (MDP) where the optimization variables are coupled together. A multi-agent Deep Reinforcement Learning (DRL) based solution is proposed where Value Decomposition Networks (VDN) algorithm is utilized to take discrete actions. Additionally, we propose a heuristic greedy algorithm as a baseline solution. Simulation results show that our learning based solution outperforms the heuristic greedy algorithm and another Orthogonal Multiple Access (OMA) solution in minimizing the mission completion time.

Ruixuan Han↗

NASA NTRSDate not supplied

Dynamic Spectrum Allocation in Urban Air Transportation System via Deep Reinforcement Learning

The emerging concepts of Urban Air Mobility (UAM) and Advanced Air Mobility (AAM) open a new paradigm for urban air transportation. A big challenge is that these new aerial vehicles will quickly saturate the already crowded aviation spectrum, which is an essential resource to ensure reliable communications for safe operations. In this paper, we consider an air transportation system where multiple aerial vehicles are operated to transport passengers or cargo from different sources to destinations along their pre-defined paths. During the flight, the minimum communication Quality of Service (QoS) requirement must be achieved to ensure flight safety. Our objective is to minimize the average mission completion time by jointly optimizing the velocity selection and spectrum allocation for all aerial vehicles. We formulate the optimization problem as a multi-stage Markov Decision Process (MDP) where the optimization variables are coupled together. A multi-agent Deep Reinforcement Learning (DRL) based solution is proposed where Value Decomposition Networks (VDN) algorithm is utilized to take discrete actions. Additionally, we propose a heuristic greedy algorithm as a baseline solution. Simulation results show that our learning based solution outperforms the heuristic greedy algorithm and another Orthogonal Multiple Access (OMA) solution in minimizing the mission completion time.

Ruixuan Han↗