Search NASA⌕ Search

SEARCH · Search NASA

Results for “aluminosilicates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Tipping Point for Expansion of Layered Aluminosilicates in Weakly Polar Solvents: Supercritical CO2

Layered aluminosilicates play a dominant role in the mechanical and gas storage properties of the subsurface, are used in diverse industrial applications, and serve as model materials for understanding solvent-ion-support systems. Although expansion in the presence of H2O is well known to be systematically correlated with the hydration free energy of the interlayer cation, in environments dominated by non-polar solvents (i.e. CO2), uptake into the interlayer is not well-understood. Using novel high pressure capabilities, we investigated the interaction of super-critical CO2 with Na+-, NH4+-, and Cs+-saturated montmorillonite, comparing results with predictions from molecular dynamics simulations. Despite the known trend in H2O, and that cation solvation energies in CO2 suggest a stronger interaction with Na+, both the NH4+- and Cs+-clays readily absorbed CO2 and expanded while the Na+-clay did not. The apparent inertness of the Na+-clay was not due to kinetics, as experiments seeking a stable expanded state showed that none exists. Molecular dynamics simulations revealed a large endothermicity to CO2 intercalation in the Na+-clay, but little or no energy barrier for the NH4+- and Cs+-clays. Consequently, we have shown for the first time that in the presence of a low dielectric constant gas swelling depends more on the strength of the interaction between interlayer cation and aluminosilicate sheets and less on that with solvent. The finding suggests a distinct regime in layered aluminosilicates swelling behavior triggered by low solvent polarizability, with important implications in geomechanics, storage and retention of volatile gases, and across industrial uses in gelling, decoloring, heterogeneous catalysis, and semi-permeable reactive barriers.

CO2, montmorillonite, molecular dynamics↗

Predicting Large CO2 Adsorption in Aluminosilicate Zeolites for Postcombustion Carbon Dioxide Capture

Large-scale simulations of aluminosilicate zeolites were conducted to identify structures that possess large CO2 uptake for postcombustion carbon dioxide capture. In this study, we discovered that the aluminosilicate zeolite structures with the highest CO2 uptake values have an idealized silica lattice with a large free volume and a framework topology that maximizes the regions with nearest-neighbor framework atom distances from 3 to 4.5 angstrom. These predictors extend well to different Si:Al ratios and for both Na+ and Ca2+ cations, demonstrating their universal applicability in identifying the best-performing aluminosilicate zeolite structures.

Kim, J↗

Molecular dynamics simulation of sodium aluminosilicate glass structures and glass surface-water reactions using the reactive force field (ReaxFF)

Reactive potentials are increasingly used to study the properties of glasses and glass water reactions in a reactive molecular dynamics (MD) framework. In this study, we have simulated a ternary sodium aluminosilicate glass and investigated the initial stages of the glass surface-water reactions at 300 K using reactive force field (ReaxFF). On comparison of the simulated glass structures generated using ReaxFF and classical Buckingham potentials, our results show that the atomic density profiles calculated for the surface glass structures indicate a bond-angle distribution dependency. The atomic density profiles also show higher concentrations of non-bridging oxygens (NBOs) and sodium ions at the glass surface. Additionally, we present our results of formation of silanol species and the diffusion of water molecules at the glass surface using ReaxFF.

Chemistry↗

Probing Hydrogen-Bonding Interactions of Water Molecules Adsorbed on Silica, Sodium Calcium Silicate, and Calcium Aluminosilicate Glasses

Vibrational sum frequency generation (SFG) spectroscopy was used to study how hydrogen bonding interactions of physisorbed water layers vary with the glass composition and surface condition. Three different glass materials were used: amorphous silica (fused quartz), sodium calcium silicate (also called soda lime silica), and calcium aluminosilicate (boron-/fluorine-free E-glass). Two different surface conditions were compared: (i) a mechanically polished, fire-polished, and then annealed surface and (ii) an acid-leached surface (pH 1, 90 °C, 24 h). Compositional and structural information obtained by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and attenuated total reflection infrared spectroscopy were correlated with SFG spectral features. The temperature dependence of SFG spectral features revealed that regardless of the glass composition, the glass surface is free of physisorbed water at 250 °C, and during cooling in ambient air, it starts absorbing water at a temperature corresponding to a relative humidity of 1–2%. Humidity-controlled SFG measurements at room temperature showed that the hydrogen bonding interactions of water physisorbed on the glass surface cleaned with UV/O 3 are quite different depending on the glass composition and surface preparation history. This finding will be useful in understanding how surface properties of different glasses are altered by humidity in ambient air.

36 MATERIALS SCIENCE↗

Density functional modeling of the binding energies between aluminosilicate oligomers and different metal cations

Interactions between negatively charged aluminosilicate species and positively charged metal cations are critical to many important engineering processes and applications, including sustainable cements and aluminosilicate glasses. In an effort to probe these interactions, here we have calculated the pair-wise interaction energies (i.e., binding energies) between aluminosilicate dimer/trimer and 17 different metal cations M n+ (M n+ = Li + , Na + , K + , Cu + , Cu 2+ , Co 2+ , Zn 2+ , Ni 2+ , Mg 2+ , Ca 2+ , Ti 2+ , Fe 2+ , Fe 3+ , Co 3+ , Cr 3+ , Ti 4+ and Cr 6+ ) using a density functional theory (DFT) approach. Analysis of the DFT-optimized structural representations for the clusters (dimer/trimer + M n+ ) shows that their structural attributes (e.g., interatomic distances) are generally consistent with literature observations on aluminosilicate glasses. The DFT-derived binding energies are seen to vary considerably depending on the type of cations (i.e., charge and ionic radii) and aluminosilicate species (i.e., dimer or trimer). A survey of the literature reveals that the difference in the calculated binding energies between different M n+ can be used to explain many literature observations associated with the impact of metal cations on materials properties (e.g., glass corrosion, mineral dissolution, and ionic transport). Analysis of all the DFT-derived binding energies reveals that the correlation between these energy values and the ionic potential and field strength of the metal cations are well captured by 2nd order polynomial functions ( R 2 values of 0.99–1.00 are achieved for regressions). Given that the ionic potential and field strength of a given metal cation can be readily estimated using well-tabulated ionic radii available in the literature, these simple polynomial functions would enable rapid estimation of the binding energies of a much wider range of cations with the aluminosilicate dimer/trimer, providing guidance on the design and optimization of sustainable cements and aluminosilicate glasses and their associated applications. Finally, the limitations associated with using these simple model systems to model complex interactions are also discussed.

Gong, Kai↗

Mesoporous layered aluminosilicates prepared from protozeolitic nanoclusters: Synthesis, physicochemical and catalytic properties

Mesoporous layered aluminosilicates were prepared by a two-stage route using tetrapropylammonium hydroxide (TPAOH) and hexadecylamine (HAD). First, aluminosilicate sols were prepared from very dilute solutions under mild conditions. The sols contained aluminosilicate nanoclusters of the average size 4 – 5 nm. 27Al NMR studies demonstrated that tumbling alone of the small aluminosilicate nanoclusters due to Brownian motions was removing effectively chemical shift anisotropy, dipolar interactions and narrowing quadrupolar interactions; thus, magic-angle-spinning was not required for obtaining good quality 27Al and 29Si NMR spectra of the sols studied. Quantitative analysis of 29Si NMR spectra allowed following evolution of the signals in time, providing insight into dynamical behavior during formation of sols. Second, the sols with the Si/Al ratios of 12 – 70 were used for preparation of the X-ray amorphous aluminosilicate materials. The samples exhibited good sorption properties due to the presence of the ca. 3 nm slit mesopores, coupled with the presence of Brønsted and Lewis acid sites. The initial reaction rate in the liquid-phase isomerization of ?-pinene and the turnover frequency (TOF) were estimated at relatively low temperature of 348 K. The mesoporous aluminosilicate materials turned out to be very active catalytically; the initial reaction rate was surpassing the rate measured over the reference zeolitic and non-zeolitic materials. TOF on mesoporous materials was also high, 0.15 and 0.27 s-1, in comparison with ZSM-5 (0.02 s-1) and ferrierite type zeolites (0.06 – 0.09 s-1).

Onik, Katarzyna↗

Development of a Composite Non-Electrostatic Surface Complexation Model Describing Plutonium Sorption to Aluminosilicates

Due to their ubiquity in nature and chemical reactivity, aluminosilicate minerals play an important role in retarding actinide subsurface migration. However, very few studies have examined Pu interaction with clay minerals in sufficient detail to produce a credible mechanistic model of its behavior. In this work, Pu(IV) and Pu(V) interactions with silica, gibbsite (Aloxide), and Na-montmorillonite (smectite clay) were examined as a function of time and pH. Sorption of Pu(IV) and Pu(V) to gibbsite and silica increased with pH (4 to 10). The Pu(V) sorption edge shifted to lower pH values over time and approached that of Pu(IV). This behavior is apparently due to surface mediated reduction of Pu(V) to Pu(IV). Surface complexation constants describing Pu(IV)/Pu(V) sorption to aluminol and silanol groups were developed from the silica and gibbsite sorption experiments and applied to the montmorillonite dataset. The model provided an acceptable fit to the montmorillonite sorption data for Pu(V). In order to accurately predict Pu(IV) sorption to montmorillonite, the model required inclusion of ion exchange. The objective of this work is to measure the sorption of Pu(IV) and Pu(V) to silica, gibbsite, and smectite (montmorillonite). Aluminosilicate minerals are ubiquitous at the Nevada National Security Site and improving our understanding of Pu sorption to aluminosilicates (smectite clays in particular) is essential to the accurate prediction of Pu transport rates. These data will improve the mechanistic approach for modeling the hydrologic source term (HST) and provide sorption Kd parameters for use in CAU models. In both alluvium and tuff, aluminosilicates have been found to play a dominant role in the radionuclide retardation because their abundance is typically more than an order of magnitude greater than other potential sorbing minerals such as iron and manganese oxides (e.g. Vaniman et al., 1996). The sorption database used in recent HST models (Carle et al., 2006) and upscaled for use in CAU models (Stoller-Navarro, 2008) includes surface complexation constants for U, Am, Eu, Np and Pu (Zavarin and Bruton, 2004). Generally, between 15 to 30 datasets were used to develop the constants for each radionuclide. However, the constants that describe Pu sorption to aluminosilicates were developed using only 10 datasets, most of which did not specify the oxidation state of Pu in the experiment. Without knowledge or control of the Pu oxidation state, a high degree of uncertainty is introduced into the model. The existing Pu surface complexation model (e.g. Zavarin and Bruton, 2004) drastically underestimates Pu sorption and, thus, will overestimate Pu migration rates (Turner, 1995). Recent HST simulations at Cambric (Carle et al., 2006) suggest that the existing surface complexation model may underpredict Pu K{sub d}s by as much as 3 orders of magnitude. In order to improve HST and CAU-scale transport models (and, as a result, reduce the conservative nature Pu migration estimates), sorption experiments were performed over a range of solution conditions that brackets the groundwater chemistry of the Nevada National Security Site. The aluminosilicates examined were gibbsite, silica, and montmorillonite.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗