Search NASA⌕ Search

SEARCH · Search NASA

Results for “ammonium phosphate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Marine Toxicity, Biodegradability, and Rolling-Sliding Tribological Performance of Ionic Liquid-Enhanced Environmentally-Acceptable Lubricants for Tidal Turbomachinery

Environmentally acceptable lubricants (EALs) are increasingly being recognized in many fields including waterpower, hydraulics, water transport, agricultural machinery, offshore wind turbines, etc. Specifically, high-performance EALs are demanded for tidal turbomachinery to ensure high efficiency and reliability and avoid the significant risk of direct contamination of the marine ecosystem upon leaks. Here we report a new development of ionic liquid (IL)-enhanced EALs for tidal energy. One short-chain phosphonium phosphate and one short-chain ammonium phosphate ILs were used as the candidate additives and the IL-containing EALs demonstrated significantly improved lubricating performance, much lower toxicity, and increased biodegradability compared with commercial baselines. Specifically, in a rolling-sliding test simulating the operation of a model tidal turbine gearbox bearing, an EAL containing the ILs at a 0.5 wt % concentration demonstrated 40% lower friction, 45% less wear loss, substantially reduced rolling contact fatigue-induced surface damage, and one order of magnitude lower vibration noise compared with a commercial gear oil. In an EPA standard toxicity test, 90 and 70% survival of marine biota was observed when exposed to an EAL containing 5 wt % of the short-chain phosphonium phosphate and ammonium phosphate ILs, respectively, while the selected commercial gear oil and bioderived additive killed all marine biota. In a standard biodegradability test, 2 wt % addition of the phosphonium phosphate IL not only retained the EAL’s ready biodegradability but further boosted the oil decomposition from a range of 60–80% to a higher level of 80–95%. Conversely, adding the commercial bioderived additive downgraded the EAL from readily to inherently biodegradable. Furthermore, this work offers scientific insights for development of ILs as potential EAL additives for marine energy and broader applications.

additives↗
DOE OSTI2024

Comparison of Eco-Friendly Ionic Liquids and Commercial Bio-Derived Lubricant Additives in Terms of Tribological Performance and Aquatic Toxicity

Approximately half of the lubricants sold globally find their way into the environment. The need for Environmentally Acceptable Lubricants (EALs) is gaining increased recognition. A lubricant is composed of a base oil and multiple functional additives. The literature has been focused on EAL base oils, with much less attention given to eco-friendly additives. This study presents the tribological performance and aquatic toxicity of four short-chain phosphonium-phosphate and ammonium-phosphate ionic liquids (ILs) as candidate anti-wear and friction-reducing additives for EALs. The results are benchmarked against those of four commercial bio-derived additives. The four ILs, at a mere 0.5 wt% concentration in a synthetic ester, demonstrated a 30–40% friction reduction and >99% wear reduction, superior to the commercial baselines. More impressively, all four ILs showed significantly lower toxicity than the bio-derived products. In an EPA-standard chronic aquatic toxicity test, the sensitive model organism, Ceriodaphnia dubia, had 90–100% survival when exposed to the ILs but 0% survival in exposure to the bio-derived products at the same concentration. This study offers scientific insights for the future development of eco-friendly ILs as lubricant additives.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microbial Ecology and Site Characteristics Underlie Differences in Salinity-Methane Relationships in Coastal Wetlands

Methane (CH 4 ) is a potent greenhouse gas emitted by archaea in anaerobic environments such as wetland soils. Tidal freshwater wetlands are predicted to become increasingly saline as sea levels rise due to climate change. Previous work has shown that increases in salinity generally decrease CH 4 emissions, but with considerable variation, including instances where salinization increased CH 4 flux. We measured microbial community composition, biogeochemistry, and CH 4 flux from field samples and lab experiments from four different sites across a wide geographic range. We sought to assess how site differences and microbial ecology affect how CH 4 emissions are influenced by salinization. CH 4 flux was generally, but not always, positively correlated with CO 2 flux, soil carbon, ammonium, phosphate, and pH. Methanogen guilds were positively correlated with CH 4 flux across all sites, while methanotroph guilds were both positively and negatively correlated with CH 4 depending on site. There was mixed support for negative relationships between CH 4 fluxes and concentrations of alternative electron acceptors and abundances of taxa that reduce them. CH 4 /salinity relationships ranged from negative, to neutral, to positive and appeared to be influenced by site characteristics such as pH and plant composition, which also likely contributed to site differences in microbial communities. The activity of site-specific microbes that may respond differently to low-level salinity increases is likely an important driver of CH 4 /salinity relationships. Our results suggest several factors that make it difficult to generalize CH 4 /salinity relationships and highlight the need for paired microbial and flux measurements across a broader range of sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Molecular Insights into Novel Struvite–Hydrogel Composites for Simultaneous Ammonia and Phosphate Removal

Struvite (NH 4 MgPO 4 ·6H 2 O) mineralization is an effective technique for removing ammonium and phosphate species from wastewater. However, its wider use faces obstacles because of the copresence of various pollutants in wastewater and the additional requirement for magnesium to achieve proper supersaturation conditions. To address these challenges, this study developed novel mineral–hydrogel composites that can remove ammonium and phosphate simultaneously via heterogeneous struvite and calcium phosphate (CaP) mineralization in hydrogel matrices. The composites include in situ formed struvite and CaP mineral seeds, decreasing the nucleation energy barrier of struvite and CaP formation and promoting their heterogeneous nucleation kinetics even under undersaturation conditions in bulk solution. The dual struvite and CaP seeded composites can simultaneously reduce the ammonium and total phosphate concentrations up to 60% (26.3 mg of N/g) and 91% (9.54 mg of P/g), respectively. Furthermore, the average particle sizes in composites were increased from 6.12 to 14.8 nm after wastewater treatment. Moreover, various ions commonly existing in wastewater did not significantly interfere with the removal of ammonium and phosphate. Thus, these new mineral–hydrogel composites can provide an innovative way to lower nutrient levels before discharge to streams. Moreover, encapsulating ammonium and phosphate in mineral-hydrogel composites enables their upcycling in agricultural or biorefinery applications.

Cations↗
DOE OSTI2024

Phosphate anion-quaternary ammonium ion pair coordinated polymer membranes

Ion exchange membranes materials according to the present disclosure exhibit improved conductivity at low and intermediate relative humidity without sacrificing mechanical strength. Polymers are provided that include a backbone with one or more aryl groups, a halocarbyl group, and a halocarbyl side chain attached to the backbone, wherein the halocarbyl side chain includes a halide separated from the backbone by a hydrocarbyl chain, a hydrocarbyl ring, or combinations thereof. The halide is substituted with a tertiary amine and halide anions are then exchanged with hydroxide anions. The polymers are then contacted with phosphoric acid, which is deprotonated by the hydroxide ions, forming anions which enhance interactions with adjacent quaternary ammonium groups and induce excess phosphoric acid molecules to cluster around those quaternary ammonium groups. The membranes exhibit negligible dopant leaching even at high relative humidity.

Bae, Chulsung↗
DOE OSTI2025

Synergy in Materials: Leveraging Phosphosilicate Waste Forms for Electrochemical Salt Waste

Here, waste forms containing glassy and crystalline phosphate and silicate phases were produced to immobilize salt waste simulants from pyroprocessing and characterized by using Raman spectroscopy, Mössbauer spectroscopy, X-ray diffraction, scanning electron microscopy, heat capacity, and chemical durability measurements. In this work, a phosphosilicate waste form is presented to leverage the benefits of both borosilicate glasses and iron phosphate glasses. To improve waste loading, prior to immobilization, salt simulants were successfully dechlorinated using ammonium dihydrogen phosphate, mixed with a borosilicate frit (5–30 wt %) and Fe 2 O 3 , and vitrified. Additions of 2.5–15 wt % borosilicate glass (NBS3) improved normalized release rates for Cs relative to iron-phosphates without NBS3, resulting in chemical durabilities similar to high-level waste borosilicate glass reference materials. The release rates of the alkalis (i.e., Li, Na, K, Cs) were the lowest with the addition of 5 wt % NBS3. Although Sr was not specifically targeted in this study, evidence exists that it preferentially partitioned with Si to form an amorphous droplet phase within the iron phosphate glass matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Liquid Sorption-Enhanced Haber–Bosch Process

The use of a liquid sorbent in a traditional Haber-Bosch process enables significant improvements in energy efficiency and potential cost savings for arguably the most important chemical process on the planet. The approach presented in this report employs an incompressible liquid sorbent that absorbs and releases ammonia (NH 3 ) under specific conditions. To achieve this, we investigate reactions of ammonia and pure phosphoric acid (H 3 PO 4 , PA), which rapidly neutralize to form an equilibrated solution of monoammonium phosphate (MAP) and diammonium phosphate (DAP) that functions as a reversible and regenerable sorbent. Through intimate contact of the gas-phase Haber-Bosch reaction mixture with this liquid absorbent, complete equilibrium uptake may be achieved in an appropriately sized separator, and facile separation occurs through the use of independent liquid and gas phases. Following depressurization and release of the ammonia product, only the incompressible fluid needs to be repressurized and returned to the reactor. This study documents proof-of-concept absorption and desorption experiments carried out in 75 mL batch reactors, predominantly charged with precise MAP and DAP mixtures that equilibrate at process-relevant temperatures and pressures. We then assemble the first thermodynamic relationships that underlie this advantaged separation strategy, validated by reactive force field (ReaxFF) interatomic potential simulations, and benchmarked with traditional separation routes via process modeling and technoeconomic analysis. The scale of energy consumption in the century-old Haber-Bosch process is massive, and the elegant liquid sorption approach reported here offers opportunities to enhance its energy efficiency for the next frontier of ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes

Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, in this study, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li 3 PO 4 , LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) and scrap LiNi 0.866 Mn 0.066 Co 0.05 Al 0.018 O 2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Integrated Anaerobic Membrane Bioreactor (AnMBR) – electro assisted fermentation platform for total resource recovery from diverse wastewaters

The overall objective of the project was to demonstrate a successful wastewater resource recovery platform comprising an Anaerobic Membrane Bioreactor (AnMBR) to achieve >50% Carbon sequestration efficiency as Volatile Fatty Acids (VFAs) or as methane gas from agricultural (animal feeding operations) wastewater along with the generation of final water exceeding Biological Nutrient Removal (BNR) standards for indirect potable reuse by coupling with constructed wetlands has been successfully accomplished. The AnMBR achieved stable performance over 350 days, removing 80–90% of COD and BOD₅ and recovering methane (0.17±0.07 L CH4/g COD at 66.5±0.03% v/v) at 3-5 LMH flux and 5-9 days HRT with 3-5% w/v total solids. Phosphorus recovery via CaO addition in an 80-L coagulation-flocculation-sedimentation unit ranged from 40.6% to 99.7%, yielding products with 11.4–13.6% P content and citric acid solubility of 32–38.6% P, comparable to rock phosphate mineral. Ammonium adsorption achieved ~94.5% recovery with exchange capacity of 10 – 16 g NH4-N/kg clinoptilolite. The CW polishing step met Kansas discharge standards for BOD5 and TN (<30 and <10 mg /L,) and approached the TP standard (~2.5 – 4 mg P/L). These findings have either already resulted in two peer reviewed publications, two patent applications, and one publication in conference proceedings.

42 ENGINEERING↗
DOE OSTI2025

Tree root nutrient uptake kinetics vary with nutrient availability, environmental conditions, and root traits: a global analysis

Summary: Root nutrient uptake by trees is a critical process that couples carbon and nutrient cycling in forest ecosystems. Yet, root nutrient uptake traits are poorly constrained, and the dynamics of this process are often not represented in models reflecting sparse measurements and understanding of root nutrient uptake physiology that lags those of aboveground physiology in forest ecosystems. Here, we present a global dataset of published nutrient uptake capacity and affinity values for tree species, with the goal of describing global patterns and evaluating responses to environmental drivers and associations with root traits. Furthermore, the dataset contains observations for ammonium, nitrate, and phosphate uptake spanning 77 tree species. Nutrient uptake capacity and affinity varied by more than an order of magnitude for each nutrient. Notably, tropical forests are underrepresented in these observations. Nutrient uptake capacity was generally diminished under nutrient enrichment but enhanced with soil warming and root–mycorrhizal colonization. The magnitude and direction of these effects can depend on the duration of exposure to a given treatment. Species with thinner roots had a tendency toward greater uptake capacity and affinity. Overall, root nutrient uptake traits are highly variable across tree species, yet they depend on environmental drivers and life-history strategies.

Km↗
DOE OSTI2025

Phosphorus and cover crop management practices affect phosphorus speciation in soils and eroded sediments

Abstract Agricultural runoff often contains P in dissolved and sediment‐bound forms, decreasing surface water quality. No‐till and cover cropping conservation practices have been recommended for reducing erosion and nutrient loss from cropping systems. The overall aims of this study were to characterize and evaluate the effects of fertilizer (placement and source) and cover crop management on P speciation in surface runoff sediments and source soil. In 2014, a field‐scale experiment was established in a no‐till, corn (Zea maysL.)–soybean (Glycine maxL.) cropping system with two cover crop treatments (with and without a winter crop; winter wheat [Triticum aestivumL.], rapeseed [Brassica napusL.], hairy vetch [Vicia villosaRoth], winter triticale [×Triticosecale Wittm.], and cereal rye [Secale cerealeL.]) and three P fertilizer management treatments (no P, fall broadcast diammonium phosphate, and spring subsurface injected ammonium polyphosphate). Phosphorus fractionation in the source soil collected in the fall of 2019 and sediment samples collected throughout 2020 were analyzed using a modified sequential P extraction method to evaluate the cumulative effects of imposing the treatment factors over 5 years. The direct P speciation was done using X‐ray absorption near edge structure spectroscopy. The indirect P speciation (fractionation) results showed that the management practices affected the exchangeable, organic matter‐associated, and Fe‐bound P fractions in sediments and the exchangeable and residual fractions in source soil. Direct P speciation results showed a depletion of Fe‐associated P in soil and sediment from cover crop treatment, suggesting that Fe‐associated P species were affected by cover crops. Changes in soil and runoff sediment P speciation would change the proportions and forms of soluble and particulate P in runoff sediments and may influence P bioavailability in aquatic ecosystems. Developing P fertilizer and cropping system management options with an understanding of soil P transformations helps maintain environmental sustainability.

Environmental Sciences & Ecology↗
DOE OSTI2025

Probing the Mechanism of Selective Phosphate Adsorption from Wastewater Using Aqueous and Synchrotron X-ray Characterization

Ion exchange shows promise for recovering phosphate from wastewater as value-added products, but requires high phosphate selectivity to compete with conventional treatment. Hybrid anion exchange (HAIX) resins, which contain non-selective basic functional groups and selective iron oxide nanoparticles (FeOnp), can effectively remove phosphate from wastewater. However, knowledge gaps remain regarding the mechanisms of phosphate selectivity and influence of competing ions, hindering needed efforts to model adsorption dynamics and design scalable adsorption processes for varying wastewaters. To address these gaps, we integrated aqueous-phase adsorption analysis with solid-phase, synchrotron-based X-ray characterization; this integration facilitated elucidation of the distribution and speciation of iron, phosphate, and competing anions on HAIX resins. We compared a quaternary ammonium-functionalized HAIX resin (SBA) to a tertiary amine version (WBA) to determine the role of functional groups. X-ray radiography revealed differences in FeOnp speciation (goethite vs. ferrihydrite) and distribution (peripheral vs. homogeneous) between the resins, resulting in varied phosphate affinity and intraparticle diffusion resistance. Using micro-X-ray fluorescence (μ-XRF) and micro-X-ray absorption near-edge structure (μ-XANES) spectroscopy, we identified differences in where and how phosphate binds across resin types and wastewaters. Across wastewater compositions, FeOnp sites in WBA contribute more to phosphate adsorption than in SBA, possibly due to variations in Fe distribution and speciation. Phosphate adsorption densities calculated from quantitative μ-XRF maps matched those from aqueous analysis, demonstrating the effectiveness of this integrated approach. Altogether, results demonstrate the use of synchrotron-based X-ray characterization for investigating adsorption mechanisms and advance HAIX as a phosphate recovery technology from complex wastewaters.

Nutrient recovery↗
DOE OSTI2024

Diversifying hierarchical ionic assembly by docking cations to anions as salt bridges

Here, we expand the diversity of building blocks available for ionic assembly by introducing tertiary (3°) ammonium cations into anion complexes. We use proton transfer between 3° amines and organo-phosphoric acids to generate H-bonding cations (R 3 NH + ) and anions (RHPO 4 – ) that co-assemble with cyanostar macrocycles into assemblies with 2:2:2 stoichiometry. At the heart is a supramolecular dimer where phosphate anions form salt bridges by H-bonding with cations. Unlike conventional 4° ammonium cations, 3,000 commercial amines provide diversity for high-throughput screening of 72 combinations (9 nitrogen bases and 8 acids), producing 13 privileged partners for quantitative assembly. Yields depend on the solvent and sterics of salt bridge formation. Ten more nitrogen bases connect to fluorophores (pyrene), photocatalysts (quinoline), drugs (Cipralex, Zytiga), and ionic liquids (imidazole). The synthesis and examination of 82 new salts exemplify how acid-base chemistry can open a pipeline to a diversity of building blocks for exploring hierarchical ionic assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cellular Phosphate Sensing and Anion Binding by an Azacrown‐Calixpyrrole Hybrid

A hybrid receptor-sensor for anions originating from the merging of positively charged ammonium moieties for electrostatic attraction/stronger binding of azacrowns with directionality of calixpyrrole hydrogen bond donors for selectivity is investigated. As demonstrated this hybrid receptor-sensor shows a remarkable selectivity for orthophosphate even in the presence of other phosphates and anions found in cellular materials (K assoc H 2 PO 4 − >H 2 P 2 O 7 2− >AMP − ≫ADP 2− or ATP 3− over halides, nitrate, or hydrogen sulfate; all Na + salts in water) but also cellular polyphosphate or phospholipids. This selectivity is harnessed in a real-time monitoring of cell lysis by lysozyme, which releases orthophosphate and other phosphates and anions from the cells. This sensitive (LOD 0.4 μM) fluorescence-based microscale method compares favorably with the state-of-the-art techniques but can easily be practiced in a high-throughput screening (HTS) manner. The anion binding and selectivity in aqueous solutions were investigated by NMR and put in context with phosphate binding of the parent calix[4]pyrrole. The microscopic understanding of anion binding by the hybrid receptor was then obtained from a combination of density functional theory (DFT), classical molecular dynamics (MD) with explicit water solvation, and ab initio MD (AIMD) simulations. Correlating the NMR and fluorescence binding data with studies of solvation of the receptor, phosphate anion, and the resulting complex confirms the binding is largely driven by entropic component (TΔS) associated with receptor and anion desolvation.

Anions↗
DOE OSTI2025

Ammonium-coordinated exchanger (ACE) functionalized silica sorbents for recovering/removing aqueous anionic contaminants

There are limited studies of functionalized silica anion exchange sorbents used for critical/heavy metal recovery/removal relative to polymeric and other inorganic materials. This work features ammonium-coordinated exchanger (ACE) anion exchange particle sorbents prepared by either acid-washing epoxy-crosslinked polyethylenimine (PEI) hydrogen bonded within/to a silica particle sorbent (two-step method) or reacting a di-chlorinated crosslinker, α,α-dichloro-p-xylene (DPX), with PEI within silica (single-step method). Energy dispersive X-ray spectroscopy (EDS) and infrared spectroscopy confirmed the presence of -NH 2 + ···Cl - and -NH 3 + ···Cl - groups, which removed oxyanionic species –arsenate, selenate, chromate, sulfate, phosphate, and nitrate– plus bromide from ideal solutions, authentic acid mine drainage (AMD), and authentic flue gas desulfurization (FGD) wastewater. Affinity of the anions for ACE varied across single- and mixed-element solutions. However, affinity for CrO 4 2- was among the highest in both cases. Total anion uptake by the optimized ACE, PEI-E3-HCl_1.1, reached 1.2 mmol anion/g-sorb. (0.56 mmol CrO 4 2- /g), or ∼2.3 mmol negative charge/g-sorb. This was close to the 0.52 mmol CrO 4 2- /g of a commercial anion exchange resin. Near-consistent removal of 20–80 % of each anion from FGD during an eight-cycle adsorption-desorption (1 M NaCl) test predicted good ACE viability for testing under practical conditions at larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗