Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic oxygen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Imaging solvated oxygen atoms with a femtosecond laser

As a powerful oxidant, atomic oxygen (O) holds considerable promise for a variety of biomedical and industrial applications. However, the inability to quantify solvated oxygen atoms has prevented the determination of the fundamental parameters governing its behaviour in relevant aqueous environments. Here, we directly image ground-state oxygen atoms in water using femtosecond two-photon absorption laser-induced fluorescence. Measurements show that oxygen atoms persist for tens of microseconds in water, penetrating hundreds of micrometres into the liquid. This observed longevity has significant implications, suggesting a need to re-evaluate existing models of solvated atomic oxygen reactivity and transport. Beyond atomic oxygen, this technique is broadly applicable to other solvated atomic species of interest, including nitrogen (N) and hydrogen (H). This work establishes that radical atomic species can be quantified in liquid with ultrafast laser spectroscopy, providing the basis for the determination of key properties including reaction rates, chemical lifetimes, and Henry’s law constants.

Fluorescence spectroscopy↗
DOE OSTI2025

Detection of atomic oxygen and its electronic coherence decays using time-resolved ultrafast coherent Raman scattering

We report the detection of atomic oxygen and quantitative measurements of its electronic Raman coherence decays in flames and low-temperature plasmas using time-resolved hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (CARS). Atomic oxygen was detected using the Raman transitions between the spin–orbit coupled triplet ground states. Atomic oxygen was generated in an H 2 /O 2 /Ar diffusion flame and an O 2 /Ar pulsed plasma discharge. Single exponential decays were observed for the O( 3 P 2 )–O( 3 P 1 ) Raman transition at 158.3 cm −1 and the O( 3 P 2 )–O( 3 P 0 ) Raman transition at 227 cm −1 . From the decay measurements, the atomic O Raman linewidths were obtained from 25 to 150 Torr in non-equilibrium plasma and at 760 Torr in a flame. Enhanced signal-to-noise ratios (SNRs) of atomic oxygen and atomic to molecular oxygen signal contrasts were obtained by taking advantage of electronic triplet coherence beating. Enhancement of up to seven times in the atomic O SNR was observed. Furthermore, we also found that the dephasing rates of O 2 (v = 0–3, N = 37) were similar, which provides evidence for the assumption that vibrational excitation does not influence the dephasing of diatomic molecular rotational CARS transitions.

Atomic and molecular spectroscopy↗
DOE OSTI2024

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array

Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O 2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 10 16 cm -3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O 2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Preliminary look at CARS spectra from atomic oxygen

Contains fundamental spectroscopic results regarding atomic oxygen. Data represent basic science contributions and are not associated with an application or defense article.

Kearney, Sean Patrick [Sandia National Laboratorie↗
DOE OSTI2026

Non-ideal stoichiometry and thermochemistry of aqueous iridium oxide nanoparticles in proton-coupled electron transfer and oxygen-atom transfer

Reported here are reactions of aqueous colloidal IrO x nanoparticles (NPs) with proton-coupled electron transfer (PCET) and oxygen-atom transfer (OAT) organic reagents, determining the reaction stoichiometries and thermochemistry. IrO x NPs have attracted much attention for their high electrocatalytic activity, but understanding of their fundamental reaction chemistry is limited. This IrO x NP model system is simple, with UV-vis titrations demonstrating reversible interconversion between predominantly Ir IV and predominantly Ir III NPs. This simplicity allows studies that reveal their complex non-idealities. The NP redox chemistry has a “super-Nernstian” stoichiometry of ∼1.3H + per 1e − transferred during both PCET and OAT reactions, as measured with electrochemistry and chemical methods. Spectroelectrochemistry revealed a broad distribution of surface IrO x –H bond dissociation free energies (BDFEs), becoming weaker as more H is added. Such variation in binding strengths—a non-ideal binding isotherm—is common for surface adsorbates. For IrO x , the variation of BDFE(IrO–H)s is fit well to a Frumkin isotherm with a width of 6.5 kcal mol −1 . For OAT from the reactive oxygen atoms of IrO x NPs, bracketing experiments gave 93 ± 24 kcal mol −1 for the average BDFE(O x Ir–O), with a predicted spread much larger than that for the BDFE(IrO–H). Taken together, the results show the importance of non-ideal stoichiometry and thermochemistry for IrO x NPs, and they open a path to more complete models to understand catalytic redox reactions at such surfaces.

Iridium Oxide Nanoparticles (NPs)↗
DOE OSTI2025

Oxygen Atom Transfer Reactions of Colloidal Metal Oxide Nanoparticles

Redox transformations at metal oxide (MO x )/solution interfaces are broadly important, and oxygen atom transfer (OAT) is one of the simplest and most fundamental examples of such reactivity. OAT is a two-electron transfer process, well-known in gas/solid reactions and catalysis. However, OAT is rarely directly observed at oxide/water interfaces, whose redox reactions are typically proposed to occur in one-electron steps. Reported here are stoichiometric OAT reactions of organic molecules with aqueous colloidal titanium dioxide and iridium oxide nanoparticles (TiO 2 and IrO x NPs). Me 2 SO (DMSO) oxidizes reduced TiO 2 NPs with the formation of Me 2 S, and IrO x NPs transfer O atoms to a water-soluble phosphine and a thioether. The reaction stoichiometries were established and the chemical mechanisms were probed using typical solution spectroscopic techniques, exploiting the high surface areas and transparency of the colloids. Furthermore, these OAT reactions, including a catalytic example, utilize the ability of the individual NPs to accumulate many electrons and/or holes. Observing OAT reactions of two different materials, in opposite directions, is a step toward harnessing oxide nanoparticles for valuable multi-electron and multi-hole transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kinetics and Mechanism of the Singlet Oxygen Atom Reaction with Dimethyl Ether

Here, we combine in situ laser spectroscopy, quantum chemistry, and kinetic calculations to study the reaction of a singlet oxygen atom with dimethyl ether. Infrared laser absorption spectroscopy and Faraday rotation spectroscopy are used for the detection and quantification of the reaction products OH, H 2 O, HO 2 , and CH 2 O on submillisecond time scales. Fitting temporal profiles of products with simulations using an in-house reaction mechanism allows product branching to be quantified at 30, 60, and 150 Torr. The experimentally determined product branching agrees well with master equation calculations based on electronic structure data and transition state theory. The calculations demonstrate that the dimethyl peroxide (CH 3 OOCH 3 ) generated via O-insertion into the C–O bond undergoes subsequent dissociation to CH 3 O + CH 3 O through energetically favored reactions without an intrinsic barrier. This O-insertion mechanism can be important for understanding the fate of biofuels leaking into the atmosphere and for plasma-based biofuel processing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Oxidation of Silicon Carbide with Atomic Oxygen through the Passive-to-Active Transition

The inelastic and reactive scattering dynamics of O( 3 P) atoms on a 6H-silicon carbide (SiC) surface were investigated as a function of temperature with a molecular beam-surface scattering technique that employed a rotatable mass spectrometer detector. One set of experiments used a pulsed hyperthermal beam that produced ~8 km s –1 O atoms, and another set of experiments used a continuous beam that contained O atoms with a nominal velocity of ~2 km s –1 . When exposed to the relatively low-flux, pulsed hyperthermal O-atom beam, a passive oxide layer on the SiC that formed at lower temperatures decomposed as the temperature increased above 1673 K. Instead of entering an active oxidation regime, a graphitic layer formed on the surface and largely protected the underlying SiC from incoming O atoms. Investigation of the oxide decomposition without O-atom bombardment revealed volatile Si and SiO products at the moment that the oxide decomposed, implying that Si sublimation occurs concurrently with oxide decomposition. In the experiment with the continuous (higher flux) O-atom beam, volatile SiO and CO products were observed after the passive oxide decomposed, indicating that active oxidation was reached. Finally, the results of this study provide evidence for the importance of Si sublimation within the active oxidation regime. Above the passive-to-active transition temperature, Si sublimation is an ongoing process, and continuous active oxidation will only occur if sufficient oxygen reacts with the surface to produce SiO more quickly than a graphitic layer can form. Thus, accurate models of SiC ablation by atomic oxygen must account for multiple competing mechanisms that depend on the surface temperature and incident O-atom flux.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Complexity in the Photofunctionalization of Single-Wall Carbon Nanotubes with Hypochlorite

The reaction of aqueous suspensions of single-wall carbon nanotubes (SWCNTs) with UV-excited sodium hypochlorite has previously been reported to be an efficient route for doping nanotubes with oxygen atoms. Here, we have investigated how this reaction system is affected by pH level, dissolved O 2 content, and radical scavengers and traps. Products were characterized with near-IR fluorescence, Raman, and XPS spectroscopy. The reaction is greatly accelerated by removal of dissolved O 2 and strongly suppressed by TEMPO, a radical trap. Alcohols added as radical scavengers alter the reaction efficiency and the product peak emission wavelengths. Photofunctionalization with 300 nm irradiation is substantially less efficient at pH levels low enough to protonate the OCl – ion to HOCl. We deduce that in mildly treated high pH samples, the main product is sp 2 hybridized O-doped adducts formed by reaction of SWCNTs with atomic oxygen in its 3 P (ground) level. By contrast, treatment under low pH conditions leads to sp 3 hybridized SWCNT adducts formed by the addition of secondary radicals from reactions of • OH and • Cl. There is also evidence for additional photoreactions of product species under stronger irradiation. Researchers using photoexcited hypochlorite for SWCNT functionalization should be alert to the range of products and the sensitivity to reaction conditions in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Examining Graphite Degradation in Molten Salt Environments: A Chemical, Physical, and Material Analysis

Molten-salt reactors (MSRs) are Generation IV nuclear reactors that use liquid salt as a coolant and/or fuel. In several MSR designs, graphite serves as a moderator and/or reflector. However, due to limited experimental data and operational experience, our understanding of graphite behavior in molten salt environments remains incomplete. This report aims to identify the degradation mechanisms of nuclear graphite in MSRs, detail the mechanisms of each factor, and provide an initial assessment of their impact on the structural integrity of graphite components. This assessment is based on an extensive literature review and insights from subject matter experts. Furthermore, given the limited data, a modeling strategy using existing Grizzly software is proposed for a more thorough analysis where appropriate. Additionally, it presents mitigation strategies where applicable. The report covers physical degradation mechanisms such as infiltration, erosion, and abrasion, as well as chemical degradation mechanisms including fluorination, intercalation, corrosion, and oxidation. Molten salt can infiltrate the porous structure of graphite, leading to several detrimental effects. Entrapment of fissile products within the graphite pores can cause radiation damage and could pose challenges in the handling and disposal of contaminated components. The differential thermal expansion between the infiltrated salt and graphite, along with internal stress from pressurized molten salt and volumetric heating, can compromise the structural integrity of graphite. To mitigate these effects, employing ultra-fine graphite grades and applying sealants and coatings are effective strategies. A computational model based on coupled solid mechanics and heat transfer phenomena could be used to predict the internal stresses using Grizzly software. In pebble-bed MSRs, graphite fuel pebbles can cause abrasion against reactor components due to friction and wear. The severity of wear is influenced by various factors such as temperature, environment, and the presence of lubricants. Tribological studies reveal that higher temperatures and molten salt environments, such as FLiBe, significantly reduce wear rates compared to dry conditions. Additionally, the chemical composition of the salt can further optimize graphite's tribological performance. Long-term wear effects can be modeled by incorporating surface defects into the geometry and predict stresses under thermal and radiation effects using Grizzly software. Chemical degradation of graphite in a molten salt environment can occur through fluorination and intercalation. Fluorination can occur via replacement of hydrogen or oxygen atoms, or at the active sites, but does not cause structural degradation. Intercalation, on the other hand, can lead to exfoliation, where layers of graphite separate and peel away, damaging the graphite. Protective coatings can enhance graphite's resistance to intercalation. Graphite generally exhibits good chemical stability in molten salt environments, though it can corrode under specific conditions, particularly in the presence of impurities or oxidants. Studies have shown that protective coatings, such as plasma-sprayed partially stabilized zirconia (PSZ), can effectively prevent such degradation. Corrosion behavior varies significantly with different graphite grades and coating applications, underscoring the need for detailed studies on uncoated and coated graphite to understand and mitigate corrosion mechanisms in MSRs. Research indicates that the presence of oxidants and impurities can accelerate graphite degradation in molten salts, making it essential to explore acceptable impurity limits. Oxidation is another critical degradation mechanism, leading to weight loss and structural damage due to the formation of CO and CO 2 from the reaction of carbon atoms with oxygen. This process creates new porosity and compromises graphite's integrity. While extensive research on graphite oxidation has been conducted for gas-cooled reactors, studies specific to MSRs are limited. Findings from the coal industry suggest that molten alkali metal salts can significantly accelerate graphite oxidation, a hypothesis worth exploring for fluoride salts in MSRs. Understanding oxidation behavior in MSRs is vital for developing protective measures. The analysis of post-irradiated graphite from the MSRE experiment demonstrated exceptional chemical compatibility with molten fluoride salt, suggesting that the extent of chemical attack on graphite largely depends on the salt's infiltration capability. Therefore, the use of ultra-fine grade graphite could help mitigate chemical degradation effects. Existing oxidation modeling capabilities in Grizzly, which use reaction-diffusion equations to model graphite-air interactions, could be adapted to simulate the chemical degradation effects of graphite in molten salt environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Electrocatalytic alkene epoxidation at disrupted metal ensembles in blended electrolytes

The project aims to achieve a molecular understanding of oxygen-atom transfer from water to alkenes at electrocatalytic interfaces. Molecular oxygen is the most common oxygen-atom source for epoxidations, and our group is developing sustainable routes through which epoxidation of olefins is achieved using water as the oxygen source. This route can improve the safety of the reaction while also co-producing hydrogen, demonstrating the relevance of this reaction to the energy transition. If successful in our efforts, we may enable oxygen-atom transfer reactions at the anode of water electrolyzers in the place of conventional oxygen evolution, allowing for the synthesis of sustainable value-added co-products. In this vein, we explore several approaches to acquiring high selectivity toward epoxidation over competing reactions, such as oxygen evolution. One of our aims is to allow for rational control of epoxide selectivity by disrupting contiguous metal ensembles at the surface of catalytic metal oxide nanoparticles. Specifically, we aim to synthesize single-atom, few-atom, and many-atom clusters supported on metal oxides and study the mechanism of oxygen evolution and alkene epoxidation on these materials. Thus, this approach will determine the impact of disrupting metal ensembles on the selectivity for alkene epoxidation versus oxygen evolution in blended electrolytes. Another aim is to develop a molecular-level understanding of how a blended electrolyte (i.e., a mixture of aqueous and organic solvents) influences rates of alkene epoxidation versus oxygen evolution. In other words, we are interested in understanding the catalytic influence of the solvent, as our preliminary work shows that the selectivity and reactivity of epoxidation depend strongly on the solvent composition. This investigation includes blended electrolytes and electrolytes containing redox mediator species that improve selectivity toward the desired epoxidation reaction. Overall, our proposed work will help to provide a detailed molecular-level picture of how solvents interact with substrates at the electrode-electrolyte interface, including their involvement in proton transfer reactions and screening of electric fields.

14 SOLAR ENERGY↗
DOE OSTI2024

Binding of Sulfates and Water to Monovalent Cations

The binding of the sulfate ligand group to monovalent cations in the presence of water is important for many systems. To understand the structure and energetics of sulfate complexes, we use density functional theory to study ethyl sulfate binding to the monovalent cations Li + , Na + , and K + , and to water. The free energies of binding and optimal structures are calculated for a range of the number of ethyl sulfates and waters. Without water, the most optimal structure for all the cations is bidentate binding by two ethyl sulfates, yielding a 4-fold coordination. With water, the lowest free energy structures also have two ethyl sulfates, but the coordination varies with cations. For complexes with water, the four oxygen atoms in the sulfate group enable multiple binding geometries for the cations and for hydrogen bonding with water. Many of these geometries differ in free energy by only a small amount (1–2 kcal/mol), meaning there will be multiple binding configurations in bulk solution. In comparison to the optimal structures for binding to the carboxylate group, there is more variation for binding to the sulfate group as a function of cation type and the number of waters. Further, the polarization of the atoms is significant and varies among the sulfate oxygen atoms. The water oxygen charge is often larger than that of sulfate oxygen, which plays a role in the preference for monodentate ligand binding to cations in the presence of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Solid-state NMR and theoretical studies illuminate lanthanum borohydride C–H borylation catalysts confined within a zeolite

Zeolite-supported single-site lanthanum borohydride catalyzes C–H borylation of hydrocarbons, while the related silica-supported complex is inactive under comparable conditions. The identical composition of support-La(BH 4 ) 2 (THF) 2 sites in the two materials implies that the support bestows underlying structural features onto La that are required for bond activation catalysis, yet the nature of these effects, which could include confinement effects and/or electronic modulation of the site itself, remains to be identified. We used solid-state nuclear magnetic resonance (SSNMR) spectroscopy and molecular dynamics simulations with machine-learning potentials (ML-MD) to analyze the electronic and steric effects imparted by the faujasite support on the precatalyst structure to correlate with catalytic activity. ML-MD simulations show that THF dissociates from La under the influence of confinement, leading to coordinatively unsaturated sites in the zeolite pores. Then, the La complex grafts on Brønsted acid sites (La BAS ) or isolated silanols (La SiO ) or remains physisorbed in the zeolite pores. Catalytic studies comparing compounds supported on faujasite zeolites containing or lacking BAS and/or silanols show that only the former complexes lead to active sites, ruling out confinement as the sole requirement for catalysis. The DFT calculations and ML-MD simulations also reveal that the surface-lanthanum coordination number is two (bidentate) for La BAS , with the metal center forming long, flexible bonds to two oxygen atoms bridging Si and Al, but only one oxygen atom (monodentate) for La SiO . The structure–activity relationship identifies confined, BAS-grafted species as active sites and provides important guidance for the design of enhanced atom-efficient catalysts.

Cui, Jinlei [Ames Laboratory, and Iowa State Univ.↗
DOE OSTI2025

Benchmarking DFT Accuracy in Predicting O 1s Binding Energies on Metals

X-ray photoelectron spectroscopy (XPS) is a powerful tool for probing the electronic structure and composition of materials, particularly metals and metal oxides of relevance to solar cells and catalysis. Density functional theory (DFT) is often used to support XPS peak assignments, but its reliability for predicting oxygen species is not well established. Here, we compile a large data set of experimental oxygen binding energies and evaluate corresponding DFT predictions. We find that as the binding energies of metal-bound atomic oxygen species increase, especially above ≈530 eV, there is a general decrease in the accuracy of DFTpredicted values. Thus, high-binding-energy atomic oxygen species, such as those proposed as active for selective Ag-catalyzed epoxidation, are less well represented. The chemical nature of the oxygen species also influences accuracy, with molecularly bound species more reliably captured across the entire range of energies. These findings illustrate the limitations of DFT for interpreting XPS spectra and provide a benchmark for improving computational methods.

Adsorption↗
DOE OSTI2025

Criegee Intermediates Compete Well with OH as a Cleaning Agent for Atmospheric Amides

Elucidating the chemical kinetics of stabilized Criegee intermediates (sCIs) in the atmosphere is critically important for climate modeling. Here, we report a class of very rapid bimolecular reactions of two sCIs, namely, CH 2 OO and syn-CH 3 CHOO, with amides. We used electronic structure calculations and kinetics calculations to elucidate a universal mechanism by which the oxygen atom of the carbonyl group in an amide is added to the carbon atom of the COO group in the sCI with simultaneous transfer of the amide hydrogen to the terminal oxygen atom of the carbonyl oxide of the sCI. The barriers for the mechanism are submerged below reactants by ∼9 kcal/mol, which means that the tight transition state is not the rate-determining step, and the rate constants are determined by loose free energy bottlenecks between the reactants and the precursor complexes. We calculate the rate constants due to these loose and barrierless transition states by variable-reaction-coordinate variational transition-state theory. We find that bimolecular reactions of sCIs with amides are very rapid, with rate constants 1 to 5 × 10 –10 cm 3 molecule –1 s –1 , which is a factor of 2 faster than the rate constants of carboxylic acids with sCIs and 10 2 faster than the rate constants of OH reactions with amides. This has the consequence that, under a wide range of conditions, sCIs are the major sink for atmospheric amides, in contrast to the usual assumption that OH radicals are the dominant sinks.

Amides↗
DOE OSTI2024

Atomistic simulations to reveal HIP-bonding mechanisms of Al6061/Al6061

Molecular dynamics simulations were employed to understand the diffusion bonding process during hot isostatic pressing (HIP) of Al6061/Al6061 alloy. Simulations of the HIP process reveal atomistic phenomena that are difficult or unlikely to be observed experimentally and provide useful insights into the mechanism of diffusion and bonding. Here, the results reveal that at the start of the HIP process, a massive incursion of oxygen atoms occurs from the pre-existing γ-Al 2 O 3 to the 6061 region across the interphase interface. These oxygen atoms interact with the enriched Mg atom layer present at the existing γ-Al 2 O 3 and 6061 matrix to form a secondary complex Mg 2 Al 2 O 5 phase. Diffusion calculations also show that transport of atoms due to the applied pressure is 4–5 orders of magnitude higher than would occur in the absence of HIP conditions. The Mg 2 Al 2 O 5 phase also provides efficient pathways for the rapid transport of Mg atoms. Because of the higher diffusion coefficients observed for Mg within the phase, Mg atoms can move more swiftly compared to their diffusion within other phases such as γ-Al 2 O 3 . This accelerated mobility facilitates the rapid movement of Mg atoms across the interface, leading to changes in the local composition and the potential growth of the Mg 2 Al 2 O 5 phase.

36 MATERIALS SCIENCE↗