Search NASA⌕ Search

SEARCH · Search NASA

Results for “attenuation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Application of non-attenuating frequency radars for prediction of rain attenuation and space diversity performance

In order to establish transmitter power and receiver sensitivity levels at frequencies above 10 GHz, the designers of earth-satellite telecommunication systems are interested in cumulative rain fade statistics at variable path orientations, elevation angles, climatological regions, and frequencies. They are also interested in establishing optimum space diversity performance parameters. In this work are examined the many elements involved in the employment of single non-attenuating frequency radars for arriving at the desired information. The elements examined include radar techniques and requirements, phenomenological assumptions, path attenation formulations and procedures, as well as error budgeting and calibration analysis. Included are the pertinent results of previous investigators who have used radar for rain attenuation modeling. Suggestions are made for improving present methods.

Goldhirsh, J.↗

The use of radar at non-attenuating wavelengths as a tool for the estimation of rain attenuation at frequencies above 10 GHz

The paper describes radar techniques and modeling procedures for estimating slant path attenuation and site diversity performance. The estimation results of an ongoing experiment at Wallops Island, Virginia are examined. At this location a high resolution S-band radar (0.4 deg beamwidth) monitors the reflectivity at contiguous pulse volumes approximately colocated with an earth space-path along which the Comstar beacon signal at 28.56 GHz is received. Radar estimated levels of rain attenuation at 28.56 GHz are compared with directly measured values both on a case by case basis as well as statistically for summer and winter periods. Use is made of ground disdrometer measurements in the radar estimation scheme.

Goldhirsh, J.↗

Methods of Attenuation Correction for Dual-Wavelength and Dual-Polarization Weather Radar Data

In writing the integral equations for the median mass diameter and number concentration, or comparable parameters of the raindrop size distribution, it is apparent that the forms of the equations for dual-polarization and dual-wavelength radar data are identical when attenuation effects are included. The differential backscattering and extinction coefficients appear in both sets of equations: for the dual-polarization equations, the differences are taken with respect to polarization at a fixed frequency while for the dual-wavelength equations, the differences are taken with respect to frequency at a fixed polarization. An alternative to the integral equation formulation is that based on the k-Z (attenuation coefficient-radar reflectivity factor) parameterization. This-technique was originally developed for attenuating single-wavelength radars, a variation of which has been applied to the TRMM Precipitation Radar data (PR). Extensions of this method have also been applied to dual-polarization data. In fact, it is not difficult to show that nearly identical equations are applicable as well to dualwavelength radar data. In this case, the equations for median mass diameter and number concentration take the form of coupled, but non-integral equations. Differences between this and the integral equation formulation are a consequence of the different ways in which attenuation correction is performed under the two formulations. For both techniques, the equations can be solved either forward from the radar outward or backward from the final range gate toward the radar. Although the forward-going solutions tend to be unstable as the attenuation out to the range of interest becomes large in some sense, an independent estimate of path attenuation is not required. This is analogous to the case of an attenuating single-wavelength radar where the forward solution to the Hitschfeld-Bordan equation becomes unstable as the attenuation increases. To circumvent this problem, the equations can be expressed in the form of a final-value problem so that the recursion begins at the far range gate and proceeds inward towards the radar. Solving the problem in this way traditionally requires estimates of path attenuation to the final gate: in the case of orthogonal linear polarizations, the attenuations at horizontal and vertical polarizations (same frequency) are required while in the dual-wavelength case, attenuations at the two frequencies (same polarization) are required.

Meneghini, R.↗

Improved Chemistry and Attenuation Models for Communication Blackout Simulation During Mars 2020 Entry

As a blunt body enters a planetary atmosphere, a plasma forms in the hypersonic shock layer and attenuates radio communication causing signal blackout for some duration of the entry sequence. In our previous work,1 computational fluid dynamics (CFD) was applied to model the entry flow around the Mars 2020 spacecraft, including ionization and electron density throughout the flow field, and predict ultra-high frequency (UHF) radio wave attenuation due to electrons. In total, 17 chemical species and their spatial profiles are modelled around the Mars 2020 spacecraft at 11 different points in time during entry. Although the simulation predicted the onset of attenuation well, the timing of the end of the predicted blackout window significantly preceded the end time observed during the 2021 landing. The present work seeks to improve the attenuation model by accounting for the fact that electrons undergo collisions with heavier species in the flow, which is an effect that was neglected in previous analyses. It is determined that including electron collisions increases the overall magnitude of attenuation predicted especially towards the end of the measured attenuation period, improving qualitative agreement between predicted and measured attenuation to both spacecraft receiving the signal from Mars 2020. To explore the remaining uncertainty in signal attenuation predictions further, a sensitivity study is performed to investigate the impact of associative ionization and electron-impact ionization rate coefficients on the electron density predicted by CFD and on the resulting attenuation predictions. These coefficients are believed to contain up to order-of-magnitude uncertainty, and therefore may significantly affect the number density of electrons throughout the flow field. Variations in associative ionization coefficients demonstrate significant impact on the magnitude of attenuation due to variation in the electron density coming from associative ionization. However, the start and end times of the predicted signal attenuation period are only slightly impacted by said variation.

Eve Papajak↗

Improved Chemistry and Attenuation Models for Communication Blackout Simulation During Mars 2020 Entry

As a blunt body enters a planetary atmosphere, a plasma forms in the hypersonic shock layer and attenuates radio communication causing signal blackout for some duration of the entry sequence. In our previous work,1 computational fluid dynamics (CFD) was applied to model the entry flow around the Mars 2020 spacecraft, including ionization and electron density throughout the flow field, and predict ultra-high frequency (UHF) radio wave attenuation due to electrons. In total, 17 chemical species and their spatial profiles are modelled around the Mars 2020 spacecraft at 11 different points in time during entry. Although the simulation predicted the onset of attenuation well, the timing of the end of the predicted blackout window significantly preceded the end time observed during the 2021 landing. The present work seeks to improve the attenuation model by accounting for the fact that electrons undergo collisions with heavier species in the flow, which is an effect that was neglected in previous analyses. It is determined that including electron collisions increases the overall magnitude of attenuation predicted especially towards the end of the measured attenuation period, improving qualitative agreement between predicted and measured attenuation to both spacecraft receiving the signal from Mars 2020. To explore the remaining uncertainty in signal attenuation predictions further, a sensitivity study is performed to investigate the impact of associative ionization and electron-impact ionization rate coefficients on the electron density predicted by CFD and on the resulting attenuation predictions. These coefficients are believed to contain up to order-of-magnitude uncertainty, and therefore may significantly affect the number density of electrons throughout the flow field. Variations in associative ionization coefficients demonstrate significant impact on the magnitude of attenuation due to variation in the electron density coming from associative ionization. However, the start and end times of the predicted signal attenuation period are only slightly impacted by said variation.

Eve Papajak↗

A statistical rain attenuation prediction model with application to the advanced communication technology satellite project. Part 2: Theoretical development of a dynamic model and application to rain fade durations and tolerable control delays for fade countermeasures

A dynamic rain attenuation prediction model is developed for use in obtaining the temporal characteristics, on time scales of minutes or hours, of satellite communication link availability. Analagous to the associated static rain attenuation model, which yields yearly attenuation predictions, this dynamic model is applicable at any location in the world that is characterized by the static rain attenuation statistics peculiar to the geometry of the satellite link and the rain statistics of the location. Such statistics are calculated by employing the formalism of Part I of this report. In fact, the dynamic model presented here is an extension of the static model and reduces to the static model in the appropriate limit. By assuming that rain attenuation is dynamically described by a first-order stochastic differential equation in time and that this random attenuation process is a Markov process, an expression for the associated transition probability is obtained by solving the related forward Kolmogorov equation. This transition probability is then used to obtain such temporal rain attenuation statistics as attenuation durations and allowable attenuation margins versus control system delay.

Manning, Robert M.↗

Ultrasonic Attenuation Results of Thermoplastic Resin Composites Undergoing Thermal and Fatigue Loading

As part of an effort to obtain the required information about new composites for aviation use, materials and NDE researchers at NASA are jointly performing mechanical and NDE measurements on new composite materials. The materials testing laboratory at NASA is equipped with environmental chambers mounted on load frames that can expose composite materials to thermal and loading cycles representative of flight protocols. Applying both temperature and load simultaneously will help to highlight temperature and load interactions during the aging of these composite materials. This report highlights our initial ultrasonic attenuation results from thermoplastic composite samples that have undergone over 4000 flight cycles to date. Ultrasonic attenuation measurements are a standard method used to assess the effects of material degradation. Recently, researchers have shown that they could obtain adequate contrast in the evaluation of thermal degradation in thermoplastic composites by using frequencies of ultrasound on the order of 24 MHz. In this study, we address the relationship of attenuation measured at lower frequencies in thermoplastic composites undergoing both thermal and mechanical loading. We also compare these thermoplastic results with some data from thermoset composites undergoing similar protocols. The composite s attenuation is reported as the slope of attenuation with respect to frequency, defined as b = Da(f)/Df. The slope of attenuation is an attractive parameter since it is quantitative, yet does not require interface corrections like conventional quantitative attenuation measurements. This latter feature is a consequence of the assumption that interface correction terms are frequency independent. Uncertainty in those correction terms can compromise the value of conventional quantitative attenuation data. Furthermore, the slope of the attenuation more directly utilizes the bandwidth information and in addition, the bandwidth can be adjusted in the post processing stage to compensate for the loss of dynamic range of the signal as the composites age.

Madaras, Eric I.↗

Impact of Scattering Model on Disdrometer Derived Attenuation Scaling

NASA Glenn Research Center (GRC), the Air Force Research Laboratory (AFRL), and the Politecnico di Milano (POLIMI) are currently entering the third year of a joint propagation study in Milan, Italy utilizing the 20 and 40 GHz beacons of the Alphasat TDP#5 Aldo Paraboni scientific payload. The Ka- and Q-band beacon receivers were installed at the POLIMI campus in June of 2014 and provide direct measurements of signal attenuation at each frequency. Collocated weather instrumentation provides concurrent measurement of atmospheric conditions at the receiver; included among these weather instruments is a Thies Clima Laser Precipitation Monitor (optical disdrometer) which records droplet size distributions (DSD) and droplet velocity distributions (DVD) during precipitation events. This information can be used to derive the specific attenuation at frequencies of interest and thereby scale measured attenuation data from one frequency to another. Given the ability to both predict the 40 gigahertz attenuation from the disdrometer and the 20 gigahertz time-series as well as to directly measure the 40 gigahertz attenuation with the beacon receiver, the Milan terminal is uniquely able to assess these scaling techniques and refine the methods used to infer attenuation from disdrometer data. In order to derive specific attenuation from the DSD, the forward scattering coefficient must be computed. In previous work, this has been done using the Mie scattering model, however, this assumes a spherical droplet shape. The primary goal of this analysis is to assess the impact of the scattering model and droplet shape on disdrometer-derived attenuation predictions by comparing the use of the Mie scattering model to the use of the T-matrix method, which does not assume a spherical droplet. In particular, this paper will investigate the impact of these two scattering approaches on the error of the resulting predictions as well as on the relationship between prediction error and rain rate.

Radio Transmission↗

Impact of Scattering Model on Disdrometer Derived Attenuation Scaling

NASA Glenn Research Center (GRC), the Air Force Research Laboratory (AFRL), and the Politecnico di Milano (POLIMI) are currently entering the third year of a joint propagation study in Milan, Italy utilizing the 20 and 40 GHz beacons of the Alphasat TDP5 Aldo Paraboni scientific payload. The Ka- and Q-band beacon receivers were installed at the POLIMI campus in June of 2014 and provide direct measurements of signal attenuation at each frequency. Collocated weather instrumentation provides concurrent measurement of atmospheric conditions at the receiver; included among these weather instruments is a Thies Clima Laser Precipitation Monitor (optical disdrometer) which records droplet size distributions (DSD) and droplet velocity distributions (DVD) during precipitation events. This information can be used to derive the specific attenuation at frequencies of interest and thereby scale measured attenuation data from one frequency to another. Given the ability to both predict the 40 GHz attenuation from the disdrometer and the 20 GHz timeseries as well as to directly measure the 40 GHz attenuation with the beacon receiver, the Milan terminal is uniquely able to assess these scaling techniques and refine the methods used to infer attenuation from disdrometer data.In order to derive specific attenuation from the DSD, the forward scattering coefficient must be computed. In previous work, this has been done using the Mie scattering model, however, this assumes a spherical droplet shape. The primary goal of this analysis is to assess the impact of the scattering model and droplet shape on disdrometer derived attenuation predictions by comparing the use of the Mie scattering model to the use of the T-matrix method, which does not assume a spherical droplet. In particular, this paper will investigate the impact of these two scattering approaches on the error of the resulting predictions as well as on the relationship between prediction error and rain rate.

statistics↗

The Extravehicular Suit Impact Load Attenuation Study for Use in Astronaut Bone Fracture Prediction

The NASA Integrated Medical Model (IMM) assesses the risk, including likelihood and impact of occurrence, of all credible in-flight medical conditions. Fracture of the proximal femur is a traumatic injury that would likely result in loss of mission if it were to happen during spaceflight. The low gravity exposure causes decreases in bone mineral density which heightens the concern. Researchers at the NASA Glenn Research Center have quantified bone fracture probability during spaceflight with a probabilistic model. It was assumed that a pressurized extravehicular activity (EVA) suit would attenuate load during a fall, but no supporting data was available. The suit impact load attenuation study was performed to collect analogous data. METHODS: A pressurized EVA suit analog test bed was used to study how the offset, defined as the gap between the suit and the astronaut s body, impact load magnitude and suit operating pressure affects the attenuation of impact load. The attenuation data was incorporated into the probabilistic model of bone fracture as a function of these factors, replacing a load attenuation value based on commercial hip protectors. RESULTS: Load attenuation was more dependent on offset than on pressurization or load magnitude, especially at small offsets. Load attenuation factors for offsets between 0.1 - 1.5 cm were 0.69 +/- 0.15, 0.49 +/- 0.22 and 0.35 +/- 0.18 for mean impact forces of 4827, 6400 and 8467 N, respectively. Load attenuation factors for offsets of 2.8 - 5.3 cm were 0.93 +/- 0.2, 0.94 +/- 0.1 and 0.84 +/- 0.5, for the same mean impact forces. Reductions were observed in the 95th percentile confidence interval of the bone fracture probability predictions. CONCLUSIONS: The reduction in uncertainty and improved confidence in bone fracture predictions increased the fidelity and credibility of the fracture risk model and its benefit to mission design and operational decisions.

Lewandowski, Beth E.↗

Lateral noise-attenuation results from flyovers of three transport aircraft

Lateral noise-attenuation data have been compiled in a one-third-octave-band analysis from an available set of flyover tests using DC-8, DC-9, and DC-10 aircraft. For an intermediate frequency range of 400 through 2000 Hertz the lateral noise has been approximately separated into its two components - the excess ground attenuation and the aircraft shielding attenuation. Both attenuation factors varied from a maximum at small elevation angles to zero at an elevation angle of approximately 40 degrees. The lateral attenuation in this range generally did not vary with frequency. For frequencies of 80 Hertz and lower, negative lateral attenuation values were obtained. For high frequencies, the data were not complete enough to generate definitive lateral attenuation curves.

Mashita, E. M.↗

C-band attenuation by tropical rainfall in Darwin, Australia, using climatologically tuned Z(e)-R relations

The probability matching method (PMM) is used as a basis for estimating attenuation in tropical rains near Darwin, Australia. PMM provides a climatological relationship between measured radar reflectivity and rain rate, which includes the effects of rain and cloud attenuation. When the radar sample is representative, PMM estimates the rainfall without bias. When the data are stratified for greater than average rates, the method no longer compensates for the higher attenuation and the radar rainfall estimates are biased low. The uncompensated attenuation is used to estimate the climatological attenuation coefficient. The two-way attenuation coefficient was found to be 0.0085 dB/km ( mm/h) exp -1.08 for the tropical rains and associated clouds in Darwin for the first two months of the year for horizontally polarized radiation at 5.63 GHz. This unusually large value is discussed. The risks of making real-time corrections for attenuation are also treated.

Atlas, David↗

Attenuation of sound in ducts with acoustic treatment: A generalized approximate equation

A generalized approximate equation for duct lining sound attenuation is presented. The specification of two parameters, the maximum possible attenuation and the optimum wall acoustic impedance is shown to completely determine the sound attenuation for any acoustic mode at any selected wall impedance. The equation is based on the nearly circular shape of the constant attenuation contours in the wall acoustic impedance plane. For impedances far from the optimum, the equation reduces to Morse's approximate expression. The equation can be used for initial acoustic liner design. Not least important is the illustrative nature of the solutions which provide an understanding of the duct propagation problem usually obscured in the exact calculations. Sample calculations using the approximate attenuation equation show that the peak and the bandwidth of the sound attenuation spectrum can be represented by quite simple functions of the ratio of actual wall acoustic resistance to optimum resistance.

Rice, E. J.↗

Attenuation of sound in ducts with acoustic treatment - A generalized approximate equation

A generalized approximate equation for duct lining sound attenuation is presented. The specification of two parameters, the maximum possible attenuation and the optimum wall acoustic impedance is shown to completely determine the sound attenuation for any acoustic mode at any selected wall impedance. The equation is based on the nearly circular shape of the constant attenuation contours in the wall acoustic impedance plane. For impedances far from the optimum, the equation reduces to Morse's approximate expression. The equation can be used for initial acoustic liner design. Not least important is the illustrative nature of the solutions which provide an understanding of the duct propagation problem usually obscured in the exact calculations. Sample calculations using the approximate attenuation equation show that the peak and the bandwidth of the sound attenuation spectrum can be represented by quite simple functions of the ratio of actual wall acoustic resistance to optimum resistance.

Rice, E. J.↗

Attenuation of propagation through rain for an earth-satellite path correlated with predicted values using radar

During the summer of 1974 and spring of 1975, measurements of attenuation of propagation through rain were made at Wallops Island, VA, using 13 and 18 GHz transmitters operating in the uplink mode toward the ATS-6 satellite. Simultaneously, rain reflectivity levels were measured along the earth-satellite path using a high resolution (0.4 deg beamwidth) S-band radar having a scanning antenna. Four rain-gages and two disdrometers were also located in the vicinity of the transmitters. The radar and disdrometer data were used in a modelling program to predict attenuation levels which were subsequently compared to the directly measured fades over nearly simultaneous time intervals. Predicted attenuation levels were obtained for three drop size distributions. Comparisons between predicted and measured attenuation levels showed the APL dropsize distribution gave the smallest rms difference of 1.3 dB at 13 and 18 GHz although the rms difference corresponding to Marshall-Palmer was close to this value. The good agreement suggests the validity of using radar to model path attenuation to obtain attenuation statistics.

Goldhirsh, J.↗

Roadside tree attenuation measurements at UHF for land mobile satellite systems

Tree attenuation results at 870 MHz are described for experiments conducted in October 1985 and March 1986 in Central Maryland. These experiments employed a helicopter as a source platform and a van with receiver and data acquisition instrumentation. Tree attenuation results were obtained for the cases in which the van was stationary and in motion. The experiments were performed for the purpose of providing the designers of planned land mobile satellite systems with important elements in the determination of link parameter requirements; namely, the expected fading statistics due to roadside trees for both mobile and stationary vehicles. Single tree attenuation results gave worst case median fades as high as 15 dB although roadside tree values were noted to produce fades in excess of 20 dB for small percentages of time. The cumulative fade distributions and their relative contributions as a function of path elevation angle, right side versus left side driving, and different road types are derived from the field measurements. Upon comparing the attenuations from bare deciduous trees (March 1986) with those due to trees in full foliage (October 1985), the increase in dB attenuations were, in general, less than 25 percent for the dynamic cases, and less than 40 percent for the worst case static configuration. This result demonstrates that the dominant fading is caused by the wooded tree branches as opposed to the leaves on these branches. The tail end of the observed fade distributions was observed to follow lognormal distributions with respect to dB attenuation.

Goldhirsh, Julius↗

Rain attenuation measurements: Variability and data quality assessment

Year to year variations in the cumulative distributions of rain rate or rain attenuation are evident in any of the published measurements for a single propagation path that span a period of several years of observation. These variations must be described by models for the prediction of rain attenuation statistics. Now that a large measurement data base has been assembled by the International Radio Consultative Committee, the information needed to assess variability is available. On the basis of 252 sample cumulative distribution functions for the occurrence of attenuation by rain, the expected year to year variation in attenuation at a fixed probability level in the 0.1 to 0.001 percent of a year range is estimated to be 27 percent. The expected deviation from an attenuation model prediction for a single year of observations is estimated to exceed 33 percent when any of the available global rain climate model are employed to estimate the rain rate statistics. The probability distribution for the variation in attenuation or rain rate at a fixed fraction of a year is lognormal. The lognormal behavior of the variate was used to compile the statistics for variability.

Crane, Robert K.↗