Search NASA⌕ Search

SEARCH · Search NASA

Results for “band modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Pb:Sn Ratio-Driven Polytypism and Band Modulation in Photoresponsive Hexagonal Perovskitoids

Three-dimensional (3D) perovskites of the formula AMX 3 are known for their excellent optoelectronic properties, but their design is limited by the narrow range of A-site cations that can template the 3D corner-sharing structure, and many of the viable options have already been explored. These materials also face structural instability under environmental conditions. In contrast, 3D hexagonal perovskitoids, with the same chemical formula, may offer enhanced stability and richer structural diversity through a range of corner- and face-sharing octahedral configuration options, providing greater opportunities for structural design; however, challenges such as synthesis complexity and wide band gaps have hindered optoelectronic performance achieved to date. Herein, we synthesized a structural homologous series of mixed-metal hexagonal perovskitoids with the formula APb 1-x Sn x I 3 (x = 0, 0.25, 0.50, 0.75, 1; A = ethylammonium, guanidinium) and identified three polytypes (9R, 12R, 6H) using single-crystal X-ray diffraction (SCXRD). These structures exhibited increasing corner-sharing connectivity with higher Sn content, revealing a previously unobserved relationship between metal composition and structural evolution in perovskitoid materials. The incorporation of Sn reduced the band gap (tunable from 2.51 eV to 1.87 eV) and drove structural transformations, a trend seen also in density functional theory (DFT) calculations, which suggest a thermodynamic preference for Pb at face-sharing sites and Sn at corner-sharing sites. DFT band structure calculations and optical spectroscopy also reveal an anomalous behavior in these materials, which we term polytypic band modulation. This phenomenon combines conventional band bowing with the structural transformations that occur as Sn content increases, as observed in the band gap and in photoluminescence spectra. Photodiodes fabricated from thin films of these materials exhibited stable and pronounced photoresponses across various light intensities over time. Furthermore, the combination of templating 3D perovskitoids with multiple cations and alloying Pb and Sn, suggests a vastly underexplored phase space that offers new parameters to tune perovskitoids.

Cations↗
DOE OSTI2026

Strong-field Driven Sub-cycle Band Structure Modulation and Dephasing Control

In this work, we present measurements of ultrafast electric-field observables in magnesium oxide using a non-resonant nonlinear optical interaction. Using field observables, we show that strong laser fields modulate the band structure on sub-cycle timescales, thereby altering the material’s nonlinear optical response. We perform time-dependent perturbation theory calculations using a field-dependent dispersion relation and semiconductor Bloch equation calculations, both of which agree with experimental observations. Furthermore, we extract pulse decay times from the real-time signal electric field envelope and show sub-cycle control of dephasing times. Our work offers a new perspective on strong-field-driven electron dynamics in solids through electric-field observables. The demonstrated attosecond modulation of the nonlinear response could have important implications for quantum light generation and quantum spectroscopy using nonlinear optical processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Electron-hole hybridization in bilayer graphene

Band structure determines the motion of electrons in a solid, giving rise to exotic phenomena when properly engineered. Drawing an analogy between electrons and photons, artificially designed optical lattices indicate the possibility of a similar band modulation effect in graphene systems. Yet due to the fermionic nature of electrons, modulated electronic systems promise far richer categories of behaviors than those found in optical lattices. Here, we uncovered a strong modulation of electronic states in bilayer graphene subject to periodic potentials. We observed for the first time the hybridization of electron and hole sub-bands, resulting in local band gaps at both primary and secondary charge neutrality points. Such hybridization leads to the formation of flat bands, enabling the study of correlated effects in graphene systems. This work may provide a novel way to manipulate electronic states in layered systems, which is important to both fundamental research and application.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A transmissive concentrator photovoltaic module with cells directly cooled by silicone oil for solar cogeneration systems

Hybrid concentrator photovoltaic-thermal systems can cogenerate electricity and heat by beam-splitting incoming concentrated light onto photovoltaic cells and a thermal receiver to increase total conversion efficiency and potentially reduce system cost. To demonstrate this, we have designed and prototyped a transmissive spectrum-splitting concentrator photovoltaic module that maximizes solar energy conversion by utilizing the entire solar spectrum. Visible light is collected using infrared-transmissive triple-junction photovoltaic cells to achieve an in-band module efficiency of 43.3% for light of wavelength λ < 873 nm, while 44.2% of out-of-band light with λ > 873 nm is transmitted through for collection by a thermal receiver. During testing on a dual-axis tracked parabolic concentrator dish at up to 166 suns, cell temperatures were maintained at 119 °C or below via a novel active cooling method. This cooling system strictly flows silicone oil directly across both sides of the cells, without inhibiting optical transmission, as verified through experimentation and simulation. The module was validated outdoors for 572 sun·hrs, and achieved a maximum thermal receiver temperature of 180 °C. 86.1% of incident solar power is collected at 166 suns average concentration collectively among the electrical, cooling, and thermal receiver subsystems. The remaining 13.9% is lost to mirror reflectivity, dish shadowing, receiver reflection, and thermal losses. The ability to directly cool the cells with an inert silicone oil offers the potential for reduced system cost relative to previous transmissive hybrid concentrator photovoltaic-thermal systems, including microfluidic-cooled designs. This solar cogeneration capability is valuable in a wide range of commercial and industrial applications.

14 SOLAR ENERGY↗
DOE OSTI2025

Observation of Orbital-Selective Dual Modulations in an Anisotropic Antiferromagnetic Kagome Metal TbTi 3 ⁢Bi 4

Orbital selectivity is pivotal in dictating the phase diagrams of multiorbital systems, with prominent examples including the orbital-selective Mott phase and superconductivity. The intercalation of anisotropic layers represents an effective method for enhancing orbital selectivity and thereby shaping the low-energy physics of multiorbital systems. Despite its potential, related experimental studies, especially those elucidating the correlation between orbital selectivity and magnetism, remain limited. In this work, we systematically examine the interplay between orbital selectivity and magnetism in the newly discovered anisotropic kagome TbTi 3 ⁢Bi 4 single crystal, and report the coexistence of orbital-selective dual-band modulations (𝑞 1 ∼ 1/3⁢𝑎*, 𝑞 2 ∼ 0.28⁢𝑏*) within the antiferromagnetic (AFM) state. By combining soft x-ray and vacuum ultraviolet angle-resolved photoemission spectroscopy measurements, neutron powder diffraction, scanning tunneling microscopy, and density-functional-theory calculations, we identify these dual-band reconstructions as manifestations of the AFM order driven by a (approximately 1/3, 0.28, 0) nesting instability of the intercalated Tb 5⁢𝑑 𝑥⁢𝑧 orbitals. These orbital-selective modulations induce unusual momentum-dependent band folding and lead to the emergence of Dirac cones only at the $\bar{M}$ 1 point, signaling a topological phase transition in the AFM state. Importantly, the discovery of orbital-selective (approximately 1/3, 0.28, 0) AFM order offers crucial insights into the mechanism underlying the fractional magnetization plateau in this kagome AFM metal. Our findings not only underscore the essential role of both conducting and localized electrons in determining the magnetic orders of Ln⁢Ti 3 ⁢Bi 4 (Ln = lanthanide) kagome metals but also offer a pathway for manipulating magnetism through selective control of anisotropic electronic structures.

Zhang, Renjie [Shanghai Jiao Tong University (Chin↗
DOE OSTI2023

Polysulfide regulation by defect-modulated Ta 3 N 5- x electrocatalyst toward superior room-temperature sodium-sulfur batteries

Resolving low sulfur reaction activity and severe polysulfide dissolution remains challenging in metal-sulfur batteries. Motivated by a theoretical prediction, herein, we strategically propose nitrogen-vacancy tantalum nitride (Ta 3 N 5-x ) impregnated inside the interconnected nanopores of nitrogen-decorated carbon matrix as a new electrocatalyst for regulating sulfur redox reactions in room-temperature sodium-sulfur batteries. Through a pore-constriction mechanism, the nitrogen vacancies are controllably constructed during the nucleation of Ta 3 N 5-x . Further, the defect manipulation on the local environment enables well-regulated Ta 5d-orbital energy level, not only modulating band structure toward enhanced intrinsic conductivity of Ta-based materials, but also promoting polysulfide stabilization and achieving bifunctional catalytic capability toward completely reversible polysulfide conversion. Moreover, the interconnected continuous Ta 3 N 5-x -in-pore structure facilitates electron and sodium-ion transport and accommodates volume expansion of sulfur species while suppressing their shuttle behavior. Due to these attributes, the as-developed Ta 3 N 5-x -based electrode achieves superior rate capability of 730 mAh g -1 at 3.35 A g -1 , long-term cycling stability over 2000 cycles, and high areal capacity over 6 mAh cm -2 under high sulfur loading of 6.2mgcm -2 . This work not only presents a new sulfur electrocatalyst candidate for metal-sulfur batteries, but also sheds light on the controllable material design of defect structure in hopes of inspiring new ideas and directions for future research.

25 ENERGY STORAGE↗
DOE OSTI2025

Computational analysis of interface-driven spin-orbit coupling in molecular adsorbates on transition metal dichalcogenides

Spin-orbit coupling (SOC) lifts molecular orbital degeneracy, enabling bilevel electronic platforms suitable for next-generation digital devices. However, common light-atom molecular feedstocks exhibit weak SOC due to the absence of heavy elements. To enhance SOC without synthesizing new materials, we leverage interfacial interactions between molecules and transition-element-based solid-state materials. This computational study investigates SOC splitting in metal-phthalocyanine adsorbed on transition metal dichalcogenides (TMDs) using density functional theory (DFT). The enhanced SOC splitting is attributed to strong orbital hybridization at the molecule-substrate interface. Specifically, Zn-phthalocyanine (ZnPC) on monolayer Mo⁢S 2 achieves a notable SOC splitting of ∼8 meV. Furthermore, when ZnPC forms self-assembled chains on Mo⁢S 2 , the splitting increases to ∼20 meV, driven by the formation of hybrid bands modulated by molecular periodicity. Furthermore, these findings highlight the role of interfacial and intermolecular interactions in inducing and enhancing SOC in surface-adsorbed molecules, providing a new strategy for molecular spintronic materials without complex synthetic efforts.

2-dimensional systems↗
DOE OSTI2025

Nanoscale modulation of flat bands via controllable charge density wave defects in 4⁢𝐻⁡𝑏−Ta⁢S 2

Electron correlation is a main driver of exotic quantum phases and their interplay. The 4H b-TaS 2 system, possessing an intrinsic heterostructure of 1T- and 1H -TaS 2 monolayers, offers a unique opportunity to control electron correlation by distorting the atomic lattice or tuning interlayer coupling. Here, we investigated intrinsically deformed charge-density waves (CDWs) in the 1T layer of 4H b-TaS 2 to elucidate and control their effects on flat bands using scanning tunneling microscopy and spectroscopy (STM/S) combined with first-principles calculations. We identified two types of CDW defects: Type 1 has structural distortion and locally suppressed flat bands, while Type 2 features an increased flat band filling factor of intact CDW structure. Density functional theory calculations indicate that a sulfur vacancy in the 1T layer distorts the CDW structure and gives rise to a Type 1, whereas a sulfur vacancy in the 1H layer reduces the interlayer charge transfer and leads to a Type 2. Furthermore, we demonstrated creating and erasing individual CDW defects via STM manipulation. Here, our findings provide a pathway to not only tune flat bands but also selectively manipulate the interaction between CDW, the atomic lattice, and interlayer coupling in strongly correlated systems with atomic precision.

Charge density waves↗
DOE OSTI2023

Visible-telecom tunable dual-band optical isolator based on dynamic modulation in thin-film lithium niobate

Optical isolators are an essential component of photonic systems. Current integrated optical isolators have limited bandwidths due to stringent phase-matching conditions, resonant structures, or material absorption. Here, we demonstrate a wideband integrated optical isolator in thin-film lithium niobate photonics. We use dynamic standing-wave modulation in a tandem configuration to break Lorentz reciprocity and achieve isolation. We measure an isolation ratio of 15 dB and insertion loss below 0.5 dB for a continuous wave laser input at 1550 nm. In addition, we experimentally show that this isolator can simultaneously operate at visible and telecom wavelengths with comparable performance. Isolation bandwidths up to ∼100 nm can be achieved simultaneously at both visible and telecom wavelengths, limited only by the modulation bandwidth. Our device’s dual-band isolation, high flexibility, and real-time tunability can enable novel non-reciprocal functionality on integrated photonic platforms.

Shah, Manav↗
DOE OSTI2020

One-colour (~220 nm) resonance-enhanced (S 1 –S 0 ) multi-photon dissociation of acetylene: probe of the C 2 A 1 Π u – X 1 Σ + g band by frequency-modulation spectroscopy

In a recent paper, we demonstrated that one-colour (~220 nm), resonance-enhanced (S 1 –S 0 ), photodissociation of acetylene generates strong $C_2$ Swan band ($d^3Π_g–a^3Π_u$) and $C_2$ Deslandres-d'Azambuja band ($C^1Π_g–A^1Π_u$) fluorescence, and long-lived (>3 µs) fluorescence from an electronically-excited $C_2$H * species. It was not known whether the $C_2A^1Π_u$ and $X^1Σ^+_g$ states are also directly populated in this process. In this paper, multiple vibration-rotation transitions between the $C_2A$-state v = 2 and the X-state v = 0 level are examined by time-resolved frequency-modulation (FM) spectroscopy. The photolysis laser wavelength is tuned into resonance at the one-photon level with S 1 –S 0 transitions that populate individual rotational levels of the S 1 $_{trans}$-conformer $3^2,3^3,$ and $3^4$ vibrational states. By comparing the phase of the FM signals from the $C_2A–X$ transitions with that from the Rb D 1 -line absorption transition, we determine that, for all of the probed A–X transitions, the X-state level is more populated than the A-state level. We propose that the acetylene S 1 level is excited by the second photon to an acetylene dissociation precursor state, which undergoes sequential C-H bond-breaking to produce the $C_2X$ state. The dissociation precursor is assigned as the $1^1B_g(trans-bent)/1^1B_1(cis-bent)$ valence state, which correlates to a doubly-excited configuration, $(1π_u)^2(1π_g)^2$, at linear geometry. Based on the rotational distributions of the $C_2X$-state fragments, we believe that at least one of the transition states involved in the photolysis via S 1 $3^4$ has a larger CC-H bend-angle for the departing H-atom than that involved in the S 1 $3^2$ and $3^3$ photolysis.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

3-D Prismatic Packaging Methodologies for Wide Band Gap Power Electronics Modules

In a power module the parasitic inductance limits the dynamic high-frequency performance, and the area of the cooling surfaces limits the power capability. This paper presents a new 3D power electronic design methodology based on the concept of mutual inductance cancellation and multi-sided heat transfer. New 3D prismatic packaging concepts are proposed for Wide Band Gap (WBG) power devices, where the devices can be mounted at acute angles to adjacent interconnects or other devices. Discussion is given on electrical and thermal path optimization in a 3D space. To validate the 3D prismatic packaging methodology, a 1200V/50A SiC half-bridge power module is fabricated and tested for electrical and thermal performance and results are compared with simulations. The power density calculated for the module is 12 kW/in3 (including heatsink) and shows a 31.3% inductance reduction compared to a 2D planar module. Finally, design guidance suggested for utilizing prismatic structures is provided, together with suggested future work in the area. This paper presents the first reported true 3D power module.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Alloying multiple halide perovskites on the same sublattice in search of stability and target band gaps

Single-component halide perovskites (HPs) rarely satisfy all the necessary criteria for optoelectronic applications, such as achieving an optimal band gap while maintaining high chemical and structural stability. Alloying halide perovskites has emerged as a promising strategy, not only to enhance stability but also to fine-tune their electronic and optical properties. In this work, we explore multiple degrees of freedom in alloy design, considering different substitution sublattices sites (A, B, or X in ABX3 perovskites), various chemical species (isovalent and hetero-valent elements), and multi-component compositions on a given sublattice. Using first-principles calculations based on density functional theory (DFT), we investigate how compositional variations influence the electronic (band gap) and structural properties (mixing enthalpy) of HP alloys. Our approach employs the polymorphous cell model, allowing full local relaxation which breaks local symmetry while preserving global cubic symmetry—an essential framework for accurately modeling HPs. Our results reveal that X-site mixing (halogen substitution) primarily affects the valence band maximum, allowing target band gap engineering. Additionally, variations in halogen radii introduce internal strain through octahedral distortions, influencing the mixing enthalpy. A-site substitution, while not directly contributing to the band edge states, modifies structural stability via volume effects, indirectly impacting the band gap. B-site alloying plays a dominant role in band gap modulation, leading to either positive or negative band gap bowing. Specifically, isovalent B-site mixing (Sn–Pb) induces strong positive bowing, where the alloy band gap is smaller than the average gap of parent compounds, whereas hetero-valent mixing (Cd–Pb) results in pronounced negative bowing. As an aside, we investigate the competition between the excess energy of disordered alloys vs. that of long-range ordered double perovskites of the same compositions, seeking examples of ordered phases emerging from disordered alloys. Furthermore, our findings provide fundamental insights into the electronic and structural behavior of HP alloys, offering valuable design principles for the development of stable and efficient materials for next-generation photovoltaic and optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Development of Metal-Free Photocatalysts

Solar fuels show great promise as clean, sustainable energy sources; however, established technologies are still plagued by high price, toxicity concerns, or low efficiencies. There is a critical need for inexpensive, benign materials that can effectively harness the sun’s energy. The overarching objective of this project is to evaluate the compatibility of novel material combinations for use as metal-free, heterojunction photocatalysts. Our central hypothesis is that by tuning the electronic structure of individual components in hybrid composites, via selective chemical modifications and physical stimuli to the interface, we can improve the photocatalytic properties of the overall assembly. We will determine factors that affect energy band gaps and band edge positions in isolated photocatalyst systems as well as explore routes to modulate heterojunction band alignments in composite assemblies. Our results will predict accessible pathways for charge carriers in new composite photocatalysts, facilitating access to more of the solar spectrum via inexpensive, environmentally-friendly material combinations.

14 SOLAR ENERGY↗
DOE OSTI2020

Orbital Modulation of Gamma Rays from PSR J2339-0533

In this work, we report on orbital modulation of the 100–600 MeV gamma-ray emission of the P B = 4.6 hr millisecond pulsar binary PSR J2339-0533 using 11 yr of Fermi Large Area Telescope data. The modulation has high significance (chance probability p ≈ 10 -7 ), is approximately sinusoidal, peaks near pulsar superior conjunction, and is detected only in the low-energy 100–600 MeV band. The modulation is confined to the on-pulse interval, suggesting that the variation is in the 2.9 ms pulsed signal itself. Additionally, this contrasts with the few other known systems exhibiting GeV orbital modulations, as these are unpulsed and generally associated with beamed emission from an intrabinary shock. The origin of the modulated pulsed signal is not yet clear, although we describe several scenarios, including Compton upscattering of photons from the heated companion. This would require high coherence in the striped pulsar wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Tunable angle-dependent electrochemistry at twisted bilayer graphene with moiré flat bands

Tailoring electron transfer dynamics across solid–liquid interfaces is fundamental to the interconversion of electrical and chemical energy. Stacking atomically thin layers with a small azimuthal misorientation to produce moiré superlattices enables the controlled engineering of electronic band structures and the formation of extremely flat electronic bands. Here, we report a strong twist-angle dependence of heterogeneous charge transfer kinetics at twisted bilayer graphene electrodes with the greatest enhancement observed near the ‘magic angle’ (~1.1°). Furthermore, this effect is driven by the angle-dependent tuning of moiré-derived flat bands that modulate electron transfer processes with the solution-phase redox couple. Combined experimental and computational analysis reveals that the variation in electrochemical activity with moiré angle is controlled by a structural relaxation of the moiré superlattice at twist angles of <2°, and ‘topological defect’ AA stacking regions, where flat bands are localized, produce a large anomalous local electrochemical enhancement that cannot be accounted for by the elevated local density of states alone.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Smart Silicon Carbide Power Module With Pulse Width Modulation Over Wi-Fi and Wireless Power Transfer-Enabled Gate Driver, Featuring Onboard State of Health Estimator and High-Voltage Scaling Capabilities: Preprint

A wide range of utility applications require controllable switches with features such as high-voltage (HV) blocking and high-current carrying capacity especially at high pulse width modulation (PWM) frequency. Low and medium voltage utility applications such as motor drives and flexible AC transmission systems (FACTS) as well as solid state transformers (SST) could also benefit from a low-cost HV switching module. Wide band gap (WBG) semiconductors such as SiC and GaN MOSFETs are considered to be the present and next generation device choices, although they have their own limitations. For relatively HV applications with demanding thermal management, SiC is still the only choice, and GaN dominates the low voltage regime. This manuscript proposes a new half bridge power MOSFET module that is suitable for conventional H-bridge of multilevel configurations used in HV applications. Constructed from bare SiC dies, this half bridge module takes advantage of (1) optimized MOSFET placement inside the module, (2) customized heat exchanger, manifold and cooling, (3) integrated gate driver module with PWM over wi-fi to eliminate the need for low voltage signals, (4) wireless power transfer (WPT) enabled gate driver and other ancillary circuits, (5) and the option to incorporate an onboard state of health (SOH) estimator module onboard. The entire architecture has been designed and built at National Renewable Energy Laboratory (NREL), Golden, CO.

baseplate design↗
DOE OSTI2026

Structural modulation, physical properties, and electronic band structure of the kagome metal UCr 6 ⁢Ge 6

The chemical flexibility of the 𝑅⁢𝑀 6 ⁢𝑋 6 stoichiometry, where an 𝑓-block element is intercalated in the CoSn structure type, allows for the tuning of flatbands associated with kagome lattices to the Fermi level and for emergent phenomena due to interactions between the 𝑓- and 𝑑-electron lattices. Yet, 5⁢𝑓 members of the “166” compounds are underrepresented compared with 4⁢𝑓 members. In this work, we report single-crystal growth of UCr 6 ⁢Ge 6 , which crystallizes in a monoclinically distorted Y 0.5⁢ Co 3 ⁢Ge 3 -type structure. The real-space character of the modulation, which is unique within the 𝑅⁢𝑀 6 ⁢𝑋 6 family, is approximated by a 3×1×2 supercell of the average monoclinic cell. The compound has kagome-lattice flatbands near the Fermi level and a moderately enhanced electronic heat capacity, as evidenced by its low-temperature Sommerfeld coefficient (𝛾=86.5 mJ mol −1 K −2 ) paired with band structure calculations. The small, isotropic magnetization and featureless resistivity of UCr 6 ⁢Ge 6 suggest itinerant uranium 5⁢𝑓 electrons and Pauli paramagnetism. Angle-resolved photoemission spectroscopy results provide evidence for uranium 5⁢𝑓 weight at the Fermi level and for a flatband near the Fermi level associated with the chromium 3⁢𝑑 kagome lattice. The isotropic magnetic behavior of the uranium 5⁢𝑓 electrons starkly contrasts with localized behavior in other uranium 166 compounds, highlighting the high tunability of the magnetic ground state across the material family.

36 MATERIALS SCIENCE↗