Search NASA⌕ Search

SEARCH · Search NASA

Results for “bandgap energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High Efficiency Inverted GaAs and GaInP/GaAs Solar Cells With Strain-Balanced GaInAs/GaAsP Quantum Wells

High-efficiency solar cells are essential for high-density terrestrial applications, as well as space and potentially vehicle applications. The optimum bandgap for the terrestrial spectrum lies beyond the absorption range of a traditional dual junction GaInP/GaAs cell, with the bottom GaAs cell having higher bandgap energy than necessary. Lower energy bandgaps can be achieved with multiple quantum wells (QWs), but such a pathway requires advanced management of the epitaxial growth conditions in order to be useful. Strain-balanced GaAsP/GaInAs QWs are incorporated into a single junction GaAs solar cell and a dual junction GaInP/GaAs solar cell, leading to 27.2% efficiency in the single junction device and a one-sun record 32.9% efficiency in the tandem device. Good carrier collection and low non-radiative recombination are observed in the cells with up to 80 QWs. The GaAs cells employ a rear-heterojunction architecture to boost the open-circuit voltage to over 1.04 V in the quantum well device, despite the large number of QWs.

14 SOLAR ENERGY↗
DOE OSTI2024

Advances in Molecular Beam Epitaxy Growth of Ultra-Wide Bandgap Ga2O3 Based Alloys

Gallium oxide (Ga2O3) is an emerging ultra-wide bandgap semiconductor material that has attracted attention for its potential to outperform existing SiC and GaN based devices operating at high breakdown voltages and high temperature. Isovalent alloying of In and Al in Ga2O3 provides the ability to engineer bandgap energy and strain of the material. Alloying with Al increases the bandgap energy and the theoretically achievable Baliga's figure of merit, a key measure of a material's ultimate performance limits for high power switching devices. Alloying with In introduces compressive strain and can be used to counteract the tensile strain of Al incorporation. The resulting (AlxGa1-x-yIny)2O3 alloy can be lattice-matched to commercially available Ga2O3 wafers and has a tunable bandgap energy greater than that of Ga2O3, 4.76 eV. Such lattice-matched material can be grown arbitrarily thick without the detrimental effects of elastic strain and relaxation, making it suitable for high voltage diodes and transistors. However, efforts to synthesize isovalent alloys are complicated by their tendency to phase separate into corundum Al2O3 or bixbyite In2O3. Literature reports of the quaternary (AlxGa1-x-yIny)2O3 are limited to <1% unintentional indium incorporation in In-catalyzed (AlxGa1-x)2O3. The primary limitation to quaternary growth is the limited incorporation of indium at elevated growth temperatures. This limited incorporation is due to both the volatility of indium oxide and Al and Ga cation exchange reactions which replace indium in In2O3. We report on the development of a novel high-throughput molecular beam epitaxy (MBE) technique to screen the growth conditions for the ternary alloy (InyGa1-y)2O3, and the application of these findings to the first successful synthesis of phase pure monoclinic (AlxGa1-x-yIny)2O3 by MBE. By leveraging the unique sub-oxide chemistry of Ga2O3 and in-situ monitoring of crystal properties by reflection high-energy electron diffraction (RHEED), a cyclical growth and etch-back method is developed and applied to rapidly characterize the (InyGa1-y)2O3 growth space. This cyclical method provides approximately 10x increase in experimental throughput and up to 46x improvement in Ga2O3 substrate utilization. Appropriate growth conditions for monoclinic (InyGa1- y)2O3 are identified by machine learning analysis of RHEED patterns and targeted growths are characterized ex-situ to confirm improved In incorporation. These growth conditions are then combined with established (AlxGa1-x)2O3 growth conditions to grow quaternary (AlxGa1-x-yIny)2O3 with Al mole fractions ranging from 1.4% - 24.4% and In mole fractions ranging from 3.1% to 15.5%. The chemical and optical properties of the alloys are investigated by XRD, XPS, and spectroscopic ellipsometry. A lattice-matched (AlxGa1-x-yIny)2O3 alloy is examined by 4D-STEM and the chemical and physical uniformity of Al and In incorporation are discussed.

alloy↗
DOE OSTI2022

Tuning bandgap and energy stability of Organic-Inorganic halide perovskites through surface engineering

Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS 2 ), molybdenum-diselenide (MoSe 2 ), tungsten-disulphide (WS 2 ), tungsten-diselenide (WSe 2 ), boron-nitiride (BN) and graphene monolayers on bandgap and energy stability of organic–inorganic halide perovskites. We found that MAPbI 3 deposited on BN-ML shows room temperature stability (-25 meV ~ 300 K) with an optimal bandgap of ~ 1.68 eV. The calculated absorption coefficient also lies in the visible-light range with a maximum of 4.9 × 10 4 cm –1 achieved at 2.8 eV photon energy. Furthermore, on the basis of our calculations, we suggest that the encapsulation of an organic–inorganic halide perovskite monolayers by semiconducting monolayers potentially provides greater flexibility for tuning the energy stability and the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Empirical thermophotovoltaic performance predictions and limits

Significant progress has been made in the field of thermophotovoltaics, with efficiency recently rising to over 40% due to improvements in cell design and material quality, higher emitter temperatures, and better spectral management. However, inconsistencies in trends for efficiency with semiconductor bandgap energy across various temperatures pose challenges in predicting optimal bandgaps or expected performance for different applications. To address these issues, here we present realistic performance predictions for various types of single-junction cells over a broad range of emitter temperatures using an empirical model based on past cell measurements. Our model is validated using data from different authors with various bandgaps and emitter temperatures, and an excellent agreement is seen between the model and the experimental data. Using our model, we show that in addition to spectral losses, it is important to consider practical electrical losses associated with series resistance and cell quality to avoid overestimation of system efficiency. Here, we also show the effect of modifying various system parameters such as bandgap, above and below-bandgap reflectance, saturation current, and series resistance on the efficiency and power density of thermophotovoltaics at different temperatures. Finally, we predict the bandgap energies for best performance over a range of emitter temperatures for different cell material qualities.

14 SOLAR ENERGY↗
DOE OSTI2021

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Design and Demonstration of AlxIn1-xP Multiple Quantum Well Light-Emitting Diodes

Direct bandgap AlxIn1-xP alloys offer an advantage for red and amber light-emitting diode (LED) operation over conventional (AlxGa1-x)0.5In0.5P alloys due to their higher direct bandgap energies. However, the coupled variation of its bandgap energy and lattice constant present challenges for fabricating quantum well-based LED devices on GaAs substrates. Here, we present the design and demonstration of AlxIn1-xP red and amber LEDs incorporating multiple quantum well structures. Strain balancing the quantum well layers and manipulating the AlxIn1-xP conduction band energy through control of spontaneous atomic ordering produce structures with higher electron confinement barriers than comparable (AlxGa1-x)0.5In0.5P LEDs. We also discuss future improvements that must be made to realize high efficiency red and amber LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Device Performance of Emerging Photovoltaic Materials (Version 3)

Abstract Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells.

14 SOLAR ENERGY↗
DOE OSTI2021

Photoelectric absorption cross section of silicon near the bandgap from room temperature to sub-Kelvin temperature

The use of cryogenic silicon as a detector medium for dark matter searches is gaining popularity. Many of these searches are highly dependent on the value of the photoelectric absorption cross section of silicon at low temperatures, particularly near the silicon bandgap energy, where the searches are most sensitive to low mass dark matter candidates. While such cross section data have been lacking from the literature, previous dark matter search experiments have attempted to estimate this parameter by extrapolating it from higher temperature data. However, discrepancies in the high temperature data have led to order-of-magnitude differences in the extrapolations. In this paper, we resolve these discrepancies by using a novel technique to make a direct, low temperature measurement of the photoelectric absorption cross section of silicon at energies near the bandgap (1.2 eV–2.8 eV).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

2D Vacancy Confinement in Anatase TiO 2 for Enhanced Photocatalytic Activities

Abstract Light‐driven energy conversion devices call for the atomic‐level manipulation of defects associated with electronic states in solids. However, previous approaches to produce oxygen vacancy (V O ) as a source of sub‐bandgap energy levels have hampered the precise control of the distribution and concentration ofV O . Here, a new strategy to spatially confineV O at the homo‐interfaces is demonstrated by exploiting the sequential growth of anatase TiO 2 under dissimilar thermodynamic conditions. Remarkably, metallic behavior with high carrier density and electron mobility is observed after sequential growth of the TiO 2 films under low pressure and temperature (L‐TiO 2 ) on top of high‐quality anatase TiO 2 epitaxial films (H‐TiO 2 ), despite the insulating properties of L‐TiO 2 and H‐TiO 2 single layers. Multiple characterizations elucidate that theV O layer is geometrically confined within 4 unit cells at the interface, along with low‐temperature crystallization of upper L‐TiO 2 films; this 2DV O layer is responsible for the formation of in‐gap states, promoting photocarrier lifetime (≈300%) and light absorption. These results suggest a synthetic strategy to locally confine functional defects and emphasize how sub‐bandgap energy levels in the confined imperfections influence the kinetics of light‐driven catalytic reactions.

Chemistry↗
DOE OSTI2024

Fundamental optical transitions in hexagonal boron nitride epilayers

Fundamental optical transitions in hexagonal boron nitride (h-BN) epilayers grown on sapphire by metal–organic chemical vapor deposition (MOCVD) using triethylboron as the boron precursor have been probed by photoluminescence (PL) emission spectroscopy. The low temperature (10 K) PL spectrum exhibits two groups of emission lines. The first group includes the direct observation of the free exciton and impurity bound exciton (BX) transitions and phonon replicas of the BX transition, whereas the second group is attributed to the direct observation of the band-to-band transition and its associated phonon replicas. The observations of zero-phonon lines of the band-to-band and exciton transitions, which are supposedly forbidden or “dark” in perfect h-BN crystals, result from a relaxed requirement of momentum conservation due to symmetry-breaking in the presence of high concentrations of impurities/defects and strain, which in turn provided more deterministic values of the energy bandgap (E g ), exciton binding energy (E x ), and binding energy of impurity bound excitons (E BX ) in h-BN epilayers. Excitonic parameters of h-BN epilayers grown by MOCVD, carbon-free chemical vapor deposition, and high purity h-BN bulk materials are compared and discussed. The present results, together with available information in the literature, represent a significant improvement in the understanding of the fundamental optical properties and excitonic parameters of h-BN ultrawide bandgap semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Device Performance of Emerging Photovoltaic Materials (Version 2)

Following the 1st release of the "Emerging photovoltaic (PV) reports", the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd installment of the "Emerging PV reports" extends the scope toward tandem solar cells and presents the current state-of-the-art in tandem solar cell performance for various material combinations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Emergence of distinct electronic states in epitaxially-fused PbSe quantum dot superlattices

Abstract Quantum coupling in arrayed nanostructures can produce novel mesoscale properties such as electronic minibands to improve the performance of optoelectronic devices, including ultra-efficient solar cells and infrared photodetectors. Colloidal PbSe quantum dots (QDs) that self-assemble into epitaxially-fused superlattices (epi-SLs) are predicted to exhibit such collective phenomena. Here, we show the emergence of distinct local electronic states induced by crystalline necks that connect individual PbSe QDs and modulate the bandgap energy across the epi-SL. Multi-probe scanning tunneling spectroscopy shows bandgap modulation from 0.7 eV in the QDs to 1.1 eV at their necks. Complementary monochromated electron energy-loss spectroscopy demonstrates bandgap modulation in spectral mapping, confirming the presence of these distinct energy states from necking. The results show the modification of the electronic structure of a precision-made nanoscale superlattice, which may be leveraged in new optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Device Performance of Emerging Photovoltaic Materials (Version 1)

Abstract Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Accurate calibration of thermophotovoltaic efficiency

Abstract The new record efficiency in Thermophotovoltaics relies upon a highly reflective rear mirror. The excellent rear mirror boosts voltage by enhancing the luminescence extraction, and separately also reflects low energy photons, which would otherwise be useless in thermophotovoltaics. The reflected low energy photons reheat the thermal emitter, and regenerate above-bandgap energy photons. The efficiency calibration for such regenerative thermophotovoltaics depends on several factors, yet predominantly on the accurate measurement of the rear mirror reflectivity. Here, we report on the technique for accurate measurement of mirror reflectivity, and of record thermophotovoltaic efficiency 29.1 ± 0.6%, at 1207 °C.

14 SOLAR ENERGY↗
DOE OSTI2026

Single-photon emission from two-dimensional perovskites channeled through low-energy edge states

Two-dimensional perovskites, an emerging family of van der Waals materials with an innate quantum-well structure, exhibit remarkable optical characteristics and compositional tunability. However, their potential as a source for quantum emitters remains unexplored. Here, we investigate low-energy edge states unique to two-dimensional perovskites using comprehensive photoluminescence imaging and spectroscopy, to further leverage them towards uncovering quantum emitters. In contrast to above-bandgap excitation, spatially localized single-photon emitters are realized through sub-bandgap energy excitation at the edges in exfoliated single crystals. Specifically, the sub-bandgap excitation facilitates efficient access to deeply confined states within the bandgap, as charge carriers can channel through low-energy edge states while inhibiting competing processes. Furthermore, we demonstrate single-photon emitters from artificially created edges via strain as well as from two-dimensional perovskites with different quantum-well thicknesses. Our findings provide promising opportunities in the development of two-dimensional quantum emitters, where two-dimensional perovskites may provide added functionalities with versatility in material design, fabrication, and scalability.

Materials for optics↗
DOE OSTI2024

Probing room temperature indirect and minimum direct band gaps of h-BN

Abstract Hexagonal boron nitride (h-BN) has attracted considerable interest as an ultrawide bandgap (UWBG) semiconductor. Experimental studies focused on the detailed near band-edge structure of h-BN at room temperature are still lacking. We report a direct experimental measurement of the near band-edge structure performed on h-BN quasi-bulk wafers via photocurrent excitation spectroscopy (PES). PES resolved the band-to-band transitions near M- and K-points in the Brillion zone (BZ), from which the room temperature indirect band gap of E g M K ∼6.02 eV, minimum direct bandgap at M-point of E g M = 6.36 eV and next lowest direct energy bandgap at K-point of E g K = 6.56 eV , have been simultaneously determined for the first time experimentally. The measured energy differences between K- and M-points in the conduction band minimum (CBM) and valence band maximum (VBM) are Δ E C M K = 0.54 eV and Δ E V M K = 0.34 eV, respectively, in good agreement with the calculation results. Significantly differing from its III-nitride wurtzite counterparts, in which only electrons and holes in the conduction and valence band extremes at the Γ-point are predominantly involved in the optical and transport processes, the results highlighted that charge carriers associated with both M- and K-valleys control to the optical excitation, recombination and charge transport processes in h-BN.

Physics↗
DOE OSTI2024

Anomalous isotope effect on the optical bandgap in a monolayer transition metal dichalcogenide semiconductor

Isotope effects have received increasing attention in materials science and engineering because altering isotopes directly affects phonons, which can affect both thermal properties and optoelectronic properties of conventional semiconductors. However, how isotopic mass affects the optoelectronic properties in 2D semiconductors remains unclear because of measurement uncertainties resulting from sample heterogeneities. Here, we report an anomalous optical bandgap energy red shift of 13 (±7) milli–electron volts as mass of Mo isotopes is increased in laterally structured 100 MoS 2 - 92 MoS 2 monolayers grown by a two-step chemical vapor deposition that mitigates the effects of heterogeneities. This trend, which is opposite to that observed in conventional semiconductors, is explained by many-body perturbation and time-dependent density functional theories that reveal unusually large exciton binding energy renormalizations exceeding the ground-state renormalization energy due to strong coupling between confined excitons and phonons. The isotope effect on the optical bandgap reported here provides perspective on the important role of exciton-phonon coupling in the physical properties of two-dimensional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Numerical Simulations of Time-Resolved Photoluminescence in CdSexTe1-x/CdTe Solar Cells

We present initial time-resolved photoluminescence (TRPL) simulations in graded CdSexTe1-e thin-film solar cells to quantify the front-interface recombination velocity, S int,front . Our model includes several composition dependences: bandgap energy, absorption coefficient, electron affinity, and carrier lifetime. Cathodoluminescence spectrum imaging measurements on bevels provide an estimate of the bandgap and the CdSe x Te 1-x alloy composition through the absorber thickness. TRPL decays are simulated as a function of the laser power, S int,front , front-interface band offset, and bulk Shockley-Read-Hall lifetime. We find the impact of S intf,ront on the PL decay increases as the band offset shifts from a "spike" to a "cliff". Recombination rate analysis shows that back-interface recombination could potentially dictate the later part of the TRPL decay "t 2" in high-lifetime CdSe x Te 1-x cells. We briefly discuss ongoing work to determine TRPL measurement conditions that maximize sensitivity to S itnt,front.

CdTe solar cells↗