Search NASA⌕ Search

SEARCH · Search NASA

Results for “beam splitters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Curved Surface Beam Splitter

Beam splitter with curved entrance and exit surfaces introduces less chromatic aberration and Seidel aberrations in some optical systems than traditional plate or block beam splitters. Spherical-surface beam splitter is used in Schmidt-type mirror objective to split converging image-forming beam so two images are formed. Small aberrations introduced are corrected by compensator plate located at or near aperture stop.

Minott, P. O.↗

Variable Bragg x-ray beam splitters

Beam splitters are utilized in a variety of advanced x-ray instruments and are essential for extending quantum optics techniques to x rays. A new fabrication method has produced thinned Bragg diffracting silicon devices with variable reflectivity and transmission coefficients and negligible absorption losses. Diffraction measurements confirm that silicon continues to exhibit perfect crystal diffraction even for thicknesses below two microns. Devices are machined from standard wafers, with the thinned regions contained within the robust frame of an unperturbed crystal for ease of handling.

Powers, L. T. (ORCID:000900047481248X)↗

Sequential, Progressive, Equal-Power Reflective Beam-Splitter Arrays

The equations to calculate equal-power reflectivity of a sequential series of beam splitters is presented. Non-sequential optical design examples are offered for uniform illumination using diode lasers. Objects created using Boolean operators and Swept Surfaces can create objects capable of reflecting light into predefined elevation and azimuth angles. Analysis of the illumination patterns for the array are also presented.

42 ENGINEERING↗

Unsupported thin film beam splitter

Multilayer beam splitter system yielding nearly equal broadband infrared reflectance and transmittance in the 5 to 50 micron spectral region has been developed which will significantly reduce size and cost of light path compensating devices in infrared spectral instruments.

Bastien, R. C.↗

Nonreciprocal Frequency Domain Beam Splitter

The canonical beam splitter—a fundamental building block of quantum optical systems—is a reciprocal element. It operates on forward- and backward-propagating modes in the same way, regardless of direction. The concept of nonreciprocal quantum photonic operations, by contrast, could be used to transform quantum states in a momentum- and direction-selective fashion. In this study, we demonstrate the basis for such a nonreciprocal transformation in the frequency domain through intermodal Bragg scattering four-wave mixing (BSFWM). Since the total number of idler and signal photons is conserved, the process can preserve coherence of quantum optical states, functioning as a nonreciprocal frequency beam splitter. We explore the origin of this nonreciprocity and find that the phase-matching requirements of intermodal BSFWM produce an enormous asymmetry ( 76 × ) in the conversion bandwidths for forward and backward configurations, yielding ~ 25 dB of nonreciprocal contrast over several hundred GHz. We also outline how the demonstrated efficiencies ( ~ 10 – 4 ) may be scaled to near-unity values with readily accessible powers and pumping configurations for applications in integrated quantum photonics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Beam Splitter Introduces Little Aberration

Placing beam splitter inside existing lens minimizes aberrations. Six channel beam splitter has optical paths of lengths equal to distances traveled by rays. Lens element cemented to each of exit faces of beam splitter is optically concentric with element cemented to entrance face and with center of curvature of monocentric optical system. Beam splitter makes it possible to form separate image in each wavelength channel of interest.

Evans, N. L., Jr.↗

Mo/Si multilayer-coated amplitude-division beam splitters for XUV radiation sources

Amplitude-division beam splitters for XUV radiation sources have been developed and extensively characterized. Mo/Si multilayer coatings were deposited on 50 nm-thick SiN membranes. By changing the multilayer structure (periodicity, number of bilayers, etc.) the intensity of the reflected and transmitted beams were optimized for selected incident radiation parameters (wavelength, incident angle). The developed optical elements were characterized by means of XUV reflectometry and transmission measurements, atomic force microscopy and optical interferometry. Special attention was paid to the spatial homogeneity of the optical response and reflected beam wavefront distortions. Here the results of the characterization are presented and improvements required for advanced applications at XUV free-electron lasers are identified. A flatness as low as 4 nm r.m.s. on 3 × 3 mm beam splitters and 22 nm r.m.s. on 10 × 10 mm beam splitters has been obtained. The high-spatial-frequency surface roughness was about 0.7–1 nm r.m.s. The middle-spatial-frequency roughness was in the range 0.2–0.8 nm r.m.s. The reflection and transmission of the beam splitters were found to be very homogeneous, with a deviation of less than 2% across the full optical element.

47 OTHER INSTRUMENTATION↗

Variable ratio beam splitter for laser applications

Beam splitter employing birefringent optics provides either widely different or precisely equal beam ratios, it can be used with laser light source systems for interferometry of lossy media, holography, scattering measurements, and precise beam ratio applications.

Brown, R. M.↗

Efficient Interaction of Heralded X-Ray Photons with a Beam Splitter

We report the experimental demonstration of efficient interaction of multi-kilo-electron-volt heralded x-ray photons with a beam splitter. The measured heralded photon rate at the outputs of the beam splitter is about 0.01 counts/s which is comparable to the rate in the absence of the beam splitter. We use this beam splitter together with photon number and photon energy resolving detectors to show directly that when a single x-ray photon interacts with a beam splitter it can only be detected at either of the ports of the beam splitter but not at both simultaneously, leading to a strong anticorrelation between the detection events at the two output ports. Our experiment demonstrates the major advantage of x rays for quantum optics—the possibility to observe experimental results with high fidelity and with negligible background.

43 PARTICLE ACCELERATORS↗

Beam splitters for dye laser pumping

Problems associated with the development of beam splitters for partitioning pump beams for pulsed dye laser systems are discussed. The operating characteristics of two types of splitters are calculated: a wedge type beam splitter and a constant-deviation prism type beam splitter. The effects of beta-angle variation on the performance of the prism type beam splitter are considered.

Heaps, W. S.↗

Fabricating wedge-shaped beam splitters

Fast economical fabrication produces wedge-shaped beam splitter with 0.3 micrometer edge, compared to conventional methods that have yielded 2 micrometer edges. Typical beam splitter made by new process is prism-shaped with right-triangle cross-section.

Fleetwood, C. M., Jr.↗

Beam Splitter Intensities Are Preselected

New beam splitter is a block of optically clear material with two parallel polish faces. Some of area of one surface is coated with totally reflecting layer, which may be metal or dielectric. On opposite surface, a metal coating of stepped thickness offers a different reflectivity at each step. Width and spacing of reflecting zones are chosen to accommodate angle of spacing of incidence of input beam and desired spacing of ouput beams.

Campbell, W.↗

Investigation on the properties of a laminar grating as a soft x-ray beam splitter

Laminar-type gratings as soft x-ray beam splitters for interferometry are presented. Gold-coated grating beam splitters with 1000 lines/mm are designed for grazing incidence operation at 13.9nm. They are routinely fabricated using electron beam lithography and ion etching techniques. The laminar grating is measured to have almost equal absolute efficiencies of about 20% in the zeroth and -1st orders, which enables a fringe visibility up to 0.99 in the interferometer. The discrepancy of the grating profiles between the optimized theoretical and the experimental results is analyzed according to the comparison of the optimized simulation results and the measurement realization of the grating efficiencies. By a precise control of the grating profile, the grating efficiency in the -1st order and the fringe visibility could be improved to 25% and 1, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oscillation of laser-beam intensity as observed with beam splitters

Characteristics of nearly perfectly flat beam splitter for observing laser pulse shapes are discussed. Disadvantages of conventional instruments for observing properties of laser beams are described. Effects of high frequency noise on accuracy of measurement are reported.

Kuehn, D. M.↗

A GHz-frequency multistrip acoustic beam splitter for quantum applications

Here we demonstrate a microwave-frequency, two-track acoustic beam splitter, based on a multistrip coupler design matched to four unidirectional transducers, two on each of the two acoustic tracks that make up the device. We explain the device design and its experimental implementation, showing good agreement between our model and the measured device scattering spectra. The beam splitter regime, dividing an input signal at port 1 into closely equal outputs at ports 2 and 3, is reached over a 94.7 MHz bandwidth centered at 4.79 GHz, with an output power division ratio |S 21 /S 31 | 2 = 1.1 ± 0.2. The measured bandwidth of the device is limited by the bandwidth of the transducers, rather than that of the multistrip coupler.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Paradox of a nonlinear beam splitter and its resolution

A nonlinear beam splitter is shown to be an interesting object of investigation for the following reasons. First, the classical and quantum theories of its description give directly opposite behaviors of the phase fluctuations: according to the classical theory, the phase is unchanged; according to the quantum theory, the phase fluctuations increase or decrease, depending on the suppression or growth of amplitude fluctuations. The fundamental cause of these differences has been established. Second, the quantum fluctuations of the input mode can be separated into the amplitude and phase ones, so that the predominantly phase fluctuations are directed into one output mode, say, the reflected one, while the amplitude fluctuations are directed into the other (transmitted) mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗