Search NASA⌕ Search

SEARCH · Search NASA

Results for “bench-scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Surfactant studies for bench-scale operation

A phase 2 study was initiated to investigate surfactant-assisted coal liquefaction, with the objective of quantifying the enhancement in liquid yields and product quality. This publication covers the first quarter of work. The major accomplishments were: the refurbishment of the high-pressure, high-temperature reactor autoclave, the completion of four coal liquefaction runs with Pittsburgh #8 coal, two each with and without sodium lignosulfonate surfactant, and the development of an analysis scheme for the product liquid filtrate and filter cake. Initial results at low reactor temperatures show that the addition of the surfactant produces an improvement in conversion yields and an increase in lighter boiling point fractions for the filtrate.

Hickey, Gregory S.↗
NASA NTRS1993

Surfactant studies for bench-scale operation

A phase 2 study has been initiated to investigate surfactant-assisted coal liquefaction, with the objective of quantifying the enhancement in liquid yields and product quality. This report covers the second quarter of work. The major accomplishments were: completion of coal liquefaction autoclave reactor runs with Illinois number 6 coal at processing temperatures of 300, 325, and 350 C, and pressures of 1800 psig; analysis of the filter cake and the filtrate obtained from the treated slurry in each run; and correlation of the coal conversions and the liquid yield quality to the surfactant concentration. An increase in coal conversions and upgrading of the liquid product quality due to surfactant addition was observed for all runs.

Hickey, Gregory S.↗
NASA NTRS1994

Bench-scale synthesis of nanoscale materials

A novel flow-through hydrothermal method used to synthesize nanoscale powders is introduced by Pacific Northwest Laboratory. The process, Rapid Thermal Decomposition of precursors in Solution (RTDS), uniquely combines high-pressure and high-temperature conditions to rapidly form nanoscale particles. The RTDS process was initially demonstrated on a laboratory scale and was subsequently scaled up to accommodate production rates attractive to industry. The process is able to produce a wide variety of metal oxides and oxyhydroxides. The powders are characterized by scanning and transmission electron microscopic methods, surface-area measurements, and x-ray diffraction. Typical crystallite sizes are less than 20 nanometers, with BET surface areas ranging from 100 to 400 sq m/g. A description of the RTDS process is presented along with powder characterization results. In addition, data on the sintering of nanoscale ZrO2 produced by RTDS are included.

Buehler, M. F.↗
NASA NTRS1961

Photosynthetic Gas Exchange in the Closed Ecosystem for Space. Phase II, Part II. Studies on the Growth of Thermophilic Chlorella 71105

Bench-scale studies with Chlorella pyrenoidosa 71105 were conducted in four- and eight-liter culture vessels, with and without recycling. It was established that the algal strain could be maintained for periods up to 72 days with supplemented re-cycled medium. In a factorial series of experiments, the highest yields were obtained with a 2.0% concentration of carbon dioxide, a 0.07 dilution factor (nutrient dilution rate/culture volume), and an 8.5 ft(exp -1) ratio of light surface to liquid culture volume. Optimum pH and concentrations of the constituents of the growth medium were determined in corollary test-tube studies. Other test-tube studies showed that the nutrient medium used for mass culture could be stored up to five weeks at 25 C or at refrigerator temperature (4 C) with little change in nitrogen-urea level. Algal suspensions stored at 4 C remained viable for periods of at least 12 weeks; growth resumed after a lag period when stored suspensions were cultured at 39 C. Streptomycin was found suitable for controlling a blue-green containment.

ALGAE↗
NASA NTRS1973

The design and fabrication of a prototype trash compacting unit

A prototype trash compactor, that is compatible with the anticipated requirements of future long-term space missions, is described. Preliminary problem definition studies were conducted to identify typical types and quantities of waste materials to be expected from a typical mission. Bench-scale compaction tests were then conducted on typical waste materials to determine force/compaction curves. These data were used to design a boilerplate compactor that was fabricated to prove the feasibility of the basic design concept. A final design was then prepared from which the deliverable unit was fabricated. Design concepts are presented for suggested further development of the compactor, including a version that is capable of handling wet biodegradable wastes.

Source record↗
NASA NTRS1974

Space shuttle maneuvering engine reusable thrust chamber program. Task 11: Stability analyses and acoustic model testing data dump

The combustion stability characteristics of engines applicable to the Space Shuttle Orbit Maneuvering System and the adequacy of acoustic cavities as a means of assuring stability in these engines were investigated. The study comprised full-scale stability rating tests, bench-scale acoustic model tests and analysis. Two series of stability rating tests were made. Acoustic model tests were made to determine the resonance characteristics and effects of acoustic cavities. Analytical studies were done to aid design of the cavity configurations to be tested and, also, to aid evaluation of the effectiveness of acoustic cavities from available test results.

Oberg, C. L.↗
NASA NTRS1975

Chemical research projects office functions accomplishments programs

Basic and applied research in the fields of polymer chemistry, polymeric composites, chemical engineering, and biophysical chemistry is summarized. Emphasis is placed on fire safety and human survivability as they relate to commercial and military aircraft, high-rise buildings, mines and rapid transit transportation. Materials systems and other fire control systems developed for aerospace applications and applied to national domestic needs are described along with bench-scale and full-scale tests conducted to demonstrate the improvements in performance obtained through the utilization of these materials and fire control measures.

Heimbuch, A. H.↗
NASA NTRS1975

Feasibility and process scale-up low cost alumina fibers for advanced Re-usable Surface Insulation (RSI)

The objective of this program was to establish feasibility of a process to produce low cost aluminum oxide fibers having sufficient strength, flexibility, and thermal stability for multiple re-use at temperatures to 1480 C in advanced RSI type heat shields for reentry vehicles. Using bench-scale processing apparatus, the Alcoa 'Saphiber' process was successfully modified to produce nominally 8 microns diameter polycrystalline alpha-alumina fiber. Thermal stability was demonstrated in vacuum reheating tests to 1371 C and in atmospheric reheating to 1483 C. Individual fiber properties of strength, modulus, and flexibility were not determined because of friability and short length of the fiber. Rigidized tile produced from fiber of nominally 8, 20 and 40 micron diameter had thermal conductivities significantly higher than those of RSI SiO2 or mullite at relatively low temperature but became comparable above about 1000 C. Tile densities were high due to short fiber length, especially in the coarser diameter fiber. No significant effect of fiber diameter on thermal properties could be determined form the data. Mechanical properties of tiles deteriorated as fiber diameter increased.

Pearson, A.↗
NASA NTRS1976

Water vapor diffusion membrane development

A total of 18 different membranes were procured, characterized, and tested in a modified bench-scale vapor diffusion water reclamation unit. Four membranes were selected for further studies involving membrane fouling. Emphasis was placed on the problem of flux decline due to membrane fouling. This is discussed in greater details under "Summary and Discussion on Membrane Fouling Studies" presented in pages 47-51. The system was also investigated for low temperature application on wash-water where the permeated water is not recovered but vented into space vacuum.

Tan, M. K.↗
NASA NTRS1977

Status of the DOE /STOR/-sponsored national program on hydrogen production from water via thermochemical cycles

A pure thermochemical cycle is a system of linked regenerative chemical reactions which accepts only water and heat and produces hydrogen. Thermochemical cycles are potentially a more efficient and cheaper means of producing hydrogen from water than is the generation of electricity followed by electrolysis. The Energy Storage Systems Division of the Department of Energy is currently funding a national program on thermochemical hydrogen production. The National Aeronautics and Space Administration is responsible for the technical management of this program. The goal is to develop a cycle which can potentially operate with an efficiency greater than 40% using a heat source providing a maximum available temperature of 1150 K. A closed bench-scale demonstration of such a cycle would follow. This cycle would be labeled a 'reference cycle' and would serve as a baseline against which future cycles would be compared.

Baker, C. E.↗
NASA NTRS1978

Status report the SRC-1 and SRC-2 processes

Bench-scale and pilot plant development of solvent refined coal (SRC) processes is reviewed. Large SRC demonstration plants are described. Commercialization of the process is envisioned for the 1980's.

Chenoweth, G. E.↗
NASA NTRS1978

The H-Coal processes: A status report

A catalytic process (H-Coal) involving the direct hydrogenation of coal to produce hydrocarbon liquids is described. Bench-scale and pilot plant development of the H-Coal process is reported. Emphasis is placed on a proposed pilot plant which will be the largest coal liquefaction plant on-line in the U.S., processing up to 600 tpd of coal. Economic considerations are given.

Voss, W. C.↗
NASA NTRS1979

Reduction of particulate carryover from a pressurized fluidized bed

A bench-scale pressurized fluidized bed combustor (PFBC) constructed with a conical shape to reduce the particulate carryover is examined. The combustor was fed coal and limestone with the coal to air ratio varying from 0.033 to 0.098 (all lean) and the coal to limestone ratio varying from 0.06 to 0.36. Two cone angles were used and it is shown that the average particulate carryover of 2.5 grains/SCF is appreciably less than cylindrical fluidized bed combustors. In addition the carryover was correlated by multiple regression analysis to yield the dependence on bed depth and hence the collection efficiency, which was 20%. Finally, a comparison with a model indicated that the exhaust port may be below the transport disengaging height for most of the tests showing that further improvements could be achieved by increasing the freeboard height of the exhaust port above the bed.

Patch, R. W.↗
NASA NTRS1984

Fuel property effects on Navy aircraft fuel systems

Problems of ensuring compatibility of Navy aircraft with fuels that may be different than the fuels for which the equipment was designed and qualified are discussed. To avoid expensive requalification of all the engines and airframe fuel systems, methodologies to qualify future fuels by using bench-scale and component testing are being sought. Fuel blends with increasing JP5-type aromatic concentration were seen to produce less volume swell than an equivalent aromatic concentration in the reference fuel. Futhermore, blends with naphthenes, decalin, tetralin, and naphthalenes do not deviate significantly from the correlation line of aromatic blends, Similar results are found with tensile strenth and elongation. Other elastomers, sealants, and adhesives are also being tested.

Moses, C. A.↗
NASA NTRS1990

Characterization of metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

Characterization of the performance of a silver-oxide-based absorbent in terms of its ability to remove both gaseous CO2 and water vapor in an astronaut portable life support systems (PLSS) is discussed. Attention is focused on regeneration of the absorbent from the carbonite state of the oxide state, preconditioning of the absorbent using a humidified gas stream, and absorption breakthrough testing. Based on the results of bench-scale experiments, a test plan is carried out to further characterize the silver-oxide-based absorbent on a larger scale; it calls for examination of the absorbent in both an adiabatic packed bed and a near-isothermal cooled bed configuration. It is demonstrated that the tested absorbent can be utilized in a way that removes substantial amounts of CO2 and water vapor during an 8-hour extravehicular activity mission, and that applying the absorbent to PLSS applications can simplify the ventilation loop.

Kast, Timothy P.↗
NASA NTRS1991

Status of NASA's Earth-to-Orbit Propulsion Technology program

Earth-to-Orbit Propulsion Technology program is considered. The program's three major technical areas include combustion devices, turbomachinery, and controls and monitoring. Directed toward reducing acquisition and operations risk and cost the ETO program is conducted in two serially-performed categories: technology acquisition and technology validation. The former is constituted of studies, tool building, and bench-scale experimentation. The latter involves next-step verification of the acquisition results and findings, usually leading to a test-bed validated technology 'product'.

Escher, W. J. D.↗
NASA NTRS1992

Aquatic biofilms and their responses to disinfection and invading species

The control of microbial contamination is a primary concern in the development of a water reclamation system for long-duration manned space flights. This paper describes bench-scale experiments, using both static and recycling water systems, investigating the interaction of bacterial species in the development of a biofilm and their response to the introduction of a disinfectant or of additional species. The results showed that iodine concentrations as high as 15 to 20 mg/l I2 are necessary to completely disinfect a stable biofilm. When S. aueus and E. coli were introduced into a system containing natural mixed culture biofilms, their colonization in the biofilms increased their survival time, from 3 to 5 days as unattached cells to over 60 days when protected in the biofilms. While iodine concentrations of 0.5 to 1 mg/l were enough to eliminate these organisms from the bulk water, concentrations higher than 4.0 mg/l were necessary to completely eliminate these organisms from the biofilm.

Smithers, G. A.↗