SEARCH · Search NASA

Results for “bin mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Investigation of Antarctic crust and upper mantle using MAGSAT and other geophysical data

Antarctica is the perfect proving ground for testing data reduction procedures which are alternatives to the standard procedure employing polynomial fitting. Unreduced data (observed values minus corefield model theo each pass) were averaged in 3 degree bins. The resulting map was then high pass filtered using a finite Fourier transform filter so that spectral peaks between 4200 km and 5280 km were diminished by 1/3, peaks corresponding to wavelengths greater than or equal to 5280 km were diminished by 1/2, and the d.c. component was set equal to zero. The surface subtracted in this way differs from the polynomials used in the standard method in that it is static over the 5 north data window. The map produced is presented and the effects of the static model are compared to those of the dynamic mode.

Bentley, C. R.↗

NASA NTRS2008

Simulation Assisted Risk Assessment Applied to Launch Vehicle Conceptual Design

A simulation-based risk assessment approach is presented and is applied to the analysis of abort during the ascent phase of a space exploration mission. The approach utilizes groupings of launch vehicle failures, referred to as failure bins, which are mapped to corresponding failure environments. Physical models are used to characterize the failure environments in terms of the risk due to blast overpressure, resulting debris field, and the thermal radiation due to a fireball. The resulting risk to the crew is dynamically modeled by combining the likelihood of each failure, the severity of the failure environments as a function of initiator and time of the failure, the robustness of the crew module, and the warning time available due to early detection. The approach is shown to support the launch vehicle design process by characterizing the risk drivers and identifying regions where failure detection would significantly reduce the risk to the crew.

Mathias, Donovan L.↗

NASA NTRS2015

Modeling Landslide Susceptibility Over Large Regions with Fuzzy Overlay

Landslide susceptibility mapping is most effective if detailed surface and subsurface information can be combined with authoritative landslide catalogs or a deep understanding of local conditions. However, these types of homogeneous input data and catalogs are frequently not available over large areas. In this study, we model landslide susceptibility in Central America and the Caribbean islands by combining three globally available datasets and one regional dataset with fuzzy overlay. This primarily heuristic model provides the flexibility to test a range of different contributing variables and the capability to compare landslide inventories within the model framework that vary greatly in their size, spatiotemporal scope, and collection methods. We create a regional susceptibility map and evaluate its performance using receiver operating characteristics for both continuous and binned susceptibility values. This susceptibility map forms the basis for a near-real-time landslide hazard assessment system that couples susceptibility with rainfall and soil moisture triggers to estimate potential landslide activity at a regional scale. The application of this susceptibility model at the regional scale provides a foundation for transferring the methodology to other geographic areas.

Landslide↗

NASA NTRS1983

Conclusions and recommendations

From the analyses performed thus far, it is clear that the ship data must be treated with great care in any satellite comparisons because of their high noise level. At the very least, the ship data should be screened to eliminate observations deviating unreasonably from climatology. In fact, a two pass screening is better, with the second pass screening out data deviating unreasonably from the first pass mapping attempt. Even with screening, the noise level is comparable with that of the satellite data and, particularly in spot comparisons, should not be used to evaluate the accuracy of the satellite data. Consideration also should be given to more sophisticated mapping procedures than simple binning averaging. Procedures that attempt local least squares fitting to individual observations would give better results because they would then be less sensitive to the spatial distribution of the data.

Source record↗

NASA NTRS2014

Northern Late Winter Planetary Waves: MRO/MARCI Observations and Mars Climate Model Simulations

As does Earth, Mars presents pronounced global atmospheric circulation patterns. Solar differential heating drives mean meridional overturning (Hadley) circulations which are deep and intense, are hemispherically asymmetric, and where a cross-equatorial single cell dominates. Within middle and high latitudes, thermally indirect eddy-driven (Ferrel) circulation cells have been indicated. Differently, however, large-amplitude orography on planetary and continental scales on Mars can force very non-Earth-like hemispheric circulation patterns. Recent observations from the Mars Reconnaissance Orbiter, "Mars Color Imager" (MARCI) instrument are utilized that emphasize water ice clouds in ultra-violet (UV) wavelengths, and these measurements have been binned into "daily global maps" (DGMs) of water-ice cloud optical depth. The presence of large-scale, extratropical quasi-stationary atmospheric wave disturbances in middle and late winter of the northern hemisphere have been found to be present in such DGMs. In combination with such observations, a full-physics Mars global climate model (NASA ARC marsgcm 2.1) is applied to place the observations into context. During late northern winter, it is found that strong, forced Rossby modes (i.e., planetary waves) exist, and with direct correlation to columnintegrated cloud opacity undulating spatial patterns. At this season, zonal wavenumber s = 2 dominates (in contrast to wavenumber s = 1), consistent with MGS/TES analyses at this particular season (Banfield et al., 2003). Large-scale, planetary waves dictate the "coherence" of the northern polar vortex. Fundamentally, such forced planetary waves influence the polar vortex's impermeability (wave-induced) to tracer transport (e.g., dust and water-ice aerosol) and temporal mean water vapor spatial variations. The large-scale dynamical features of such planetary waves will be highlighted and discussed.

Northern polar vortex↗

NASA NTRS2016

Effect of Satellite Formations and Imaging Modes on Global Albedo Estimation

We confirm the applicability of using small satellite formation flight for multi-angular earth observation to retrieve global, narrow band, narrow field-of-view albedo. The value of formation flight is assessed using a coupled systems engineering and science evaluation model, driven by Model Based Systems Engineering and Observing System Simulation Experiments. Albedo errors are calculated against bi-directional reflectance data obtained from NASA airborne campaigns made by the Cloud Absorption Radiometer for the seven major surface types, binned using MODIS' land cover map - water, forest, cropland, grassland, snow, desert and cities. A full tradespace of architectures with three to eight satellites, maintainable orbits and imaging modes (collective payload pointing strategies) are assessed. For an arbitrary 4-sat formation, changing the reference, nadir-pointing satellite dynamically reduces the average albedo error to 0.003, from 0.006 found in the static reference case. Tracking pre-selected waypoints with all the satellites reduces the average error further to 0.001, allows better polar imaging and continued operations even with a broken formation. An albedo error of 0.001 translates to 1.36 W/sq m or 0.4% in Earth's outgoing radiation error. Estimation errors are found to be independent of the satellites' altitude and inclination, if the nadir-looking is changed dynamically. The formation satellites are restricted to differ in only right ascension of planes and mean anomalies within slotted bounds. Three satellites in some specific formations show average albedo errors of less than 2% with respect to airborne, ground data and seven satellites in any slotted formation outperform the monolithic error of 3.6%. In fact, the maximum possible albedo error, purely based on angular sampling, of 12% for monoliths is outperformed by a five-satellite formation in any slotted arrangement and an eight satellite formation can bring that error down four fold to 3%. More than 70% ground spot overlap between the satellites is possible with 0.5deg of pointing accuracy, 2 Km of GPS accuracy and commands uplinked once a day. The formations can be maintained at less than 1 m/s of monthly (Delta)V per satellite.

BRDF↗

NASA NTRS1982

Analyzing the Broken Ridge area of the Indian Ocean using magnetic and gravity anomaly maps and geoid undulation and bathymetry data

A higher resolution anomaly map of the Broken Ridge area (2 degree dipole spacing) was produced and reduced to the pole using quiet time data for this area. The map was compared with equally scaled maps of gravity anomaly, geoid undulation, and bathymetry. The ESMAP results were compared with a NASA MAGSAT map derived by averaging data in two-degree bins. A survey simulation was developed to model the accuracy of MAGSAT anomaly maps as a function of satellite altitude, instrument noise level, external noise model, and crustal anomaly field model. A preliminary analysis of the geophysical structure of Broken Ridge is presented and unresolved questions are listed.

Lazarewicz, A. R.↗

NASA NTRS1995

Synoptic maps of solar wind parameters from in situ spacecraft observations

Solar wind observations from the Interplanetary Monitoring Platform-8 (IMP-8) and Pioneer Venus Orbiter (PVO) spacecraft from 1982 until 1988 are combined to construct synoptic maps of solar wind parameters near 1 AU. Each map consists of 6 months of hourly averaged solar wind data, binned by heliographic latitude and Carrington longitude and projected back to the Sun. These maps show the structure and time evolution of solar wind streams near 1 AU in the heliographic latitudes of +/- 7.25 deg and provide and explicit picture of several phenomena, such as gradients, changes in the inclination of the heliospheric current sheet, and the relative positions of various structures in the inner heliosphere, that is difficult to obtain from single-spacecraft observations. The stream structure varied significantly during the last solar cycle. Between 1982 and early 1985, solar wind parameters did not depend strongly on heliographic latitude. During the last solar minimum, the solar wind developed significant latitudinal structure, and high-speed streams were excluded from the vicinity of the solar equator. The interplanetary magnetic field was strongly correlated with the coronal field, and the current sheet tended to coincide with the coronal neutral line. The solar wind speed showed the expected correlations with temperature, interplanetary magnetic field, and distance from the current sheet. The solar wind speed was anticorrelated with density, but the regions of highest density occurred east of the heliospheric current sheet and the regions of lowest solar wind speed. This is consistent with compression at the leading edge of high-speed streams.

Gazis, P. R.↗

NASA NTRSDate not supplied

Alternate Inversion Paradigm for Spectroheliogram Data

Over the past five years, new methods to reconstruct spectrally pure maps of the Sun from spectroheliogram data have emerged, essentially unlocking this long-abandoned method of obtaining both spatial and spectral information over a large field of view simultaneously. The original inversion method determined the plasma’s emission measure distribution as a function of temperature at every spatial location in the field of view. To complete this inversion, a response matrix had to be created mapping the emission measure in different (temperature, space) bins to detector, requiring assumptions on the thermal and ionization equilibrium and abundance state of the plasma. We have since derived a new method of the inversion that does not require these atomic assumptions to be made. Instead, we use only the different locations of spectral lines from the same ion species and the possible ratios of those single-species spectral lines, removing the need for a priori knowledge on the state of the emitting plasma. In this presentation, we demonstrate this method using observed data from the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS) and simulated data from the EUV CME and Coronal Connectivity Observatory (ECCCO) investigation.

Amy Winebarger↗

NASA NTRS2012

Decorrelation Times of Photospheric Fields and Flows

We use autocorrelation to investigate evolution in flow fields inferred by applying Fourier Local Correlation Tracking (FLCT) to a sequence of high-resolution (0.3 "), high-cadence (approx = 2 min) line-of-sight magnetograms of NOAA active region (AR) 10930 recorded by the Narrowband Filter Imager (NFI) of the Solar Optical Telescope (SOT) aboard the Hinode satellite over 12 - 13 December 2006. To baseline the timescales of flow evolution, we also autocorrelated the magnetograms, at several spatial binnings, to characterize the lifetimes of active region magnetic structures versus spatial scale. Autocorrelation of flow maps can be used to optimize tracking parameters, to understand tracking algorithms f susceptibility to noise, and to estimate flow lifetimes. Tracking parameters varied include: time interval Delta t between magnetogram pairs tracked, spatial binning applied to the magnetograms, and windowing parameter sigma used in FLCT. Flow structures vary over a range of spatial and temporal scales (including unresolved scales), so tracked flows represent a local average of the flow over a particular range of space and time. We define flow lifetime to be the flow decorrelation time, tau . For Delta t > tau, tracking results represent the average velocity over one or more flow lifetimes. We analyze lifetimes of flow components, divergences, and curls as functions of magnetic field strength and spatial scale. We find a significant trend of increasing lifetimes of flow components, divergences, and curls with field strength, consistent with Lorentz forces partially governing flows in the active photosphere, as well as strong trends of increasing flow lifetime and decreasing magnitudes with increases in both spatial scale and Delta t.

Welsch, B. T.↗

NASA NTRS2002

MODIS Data from the GES DISC DAAC: Moderate-Resolution Imaging Spectroradiometer (MODIS)

The Goddard Earth Sciences (GES) Distributed Active Archive Center (DAAC) is responsible for the distribution of the Level 1 data, and the higher levels of all Ocean and Atmosphere products (Land products are distributed through the Land Processes (LP) DAAC DAAC, and the Snow and Ice products are distributed though the National Snow and Ice Data Center (NSIDC) DAAC). Ocean products include sea surface temperature (SST), concentrations of chlorophyll, pigment and coccolithophores, fluorescence, absorptions, and primary productivity. Atmosphere products include aerosols, atmospheric water vapor, clouds and cloud masks, and atmospheric profiles from 20 layers. While most MODIS data products are archived in the Hierarchical Data Format-Earth Observing System (HDF-EOS 2.7) format, the ocean binned products and primary productivity products (Level 4) are in the native HDF4 format. MODIS Level 1 and 2 data are of the Swath type and are packaged in files representing five minutes of Files for Level 3 and 4 are global products at daily, weekly, monthly or yearly resolutions. Apart from the ocean binned and Level 4 products, these are in Grid type, and the maps are in the Cylindrical Equidistant projection with rectangular grid. Terra viewing (scenes of approximately 2000 by 2330 km). MODIS data have several levels of maturity. Most products are released with a provisional level of maturity and only announced as validated after rigorous testing by the MODIS Science Teams. MODIS/Terra Level 1, and all MODIS/Terra 11 micron SST products are announced as validated. At the time of this publication, the MODIS Data Support Team (MDST) is working with the Ocean Science Team toward announcing the validated status of the remainder of MODIS/Terra Ocean products. MODIS/Aqua Level 1 and cloud mask products are released with provisional maturity.

Source record↗

NASA NTRS1994

Heliospheric current sheet inclinations predicted from source surface maps

The inclinations of the neutral line at the ecliptic plane derived from source surface model maps of coronal fields are measured for the interval from June 1976 to March 1992. The mean and median values of 53 deg and 57 deg are close to the average inclinations determined earlier from minimum variance analyses of solar wind measurements at sector boundaries, but the mode falls in the 80 deg - 90 deg bin. This result, which is based on the model assumptions implicit in deriving the source surface maps, predicts that the heliospheric current sheet typically intersects the ecliptic plane nearly at right angles, even without steepening by stream interaction regions. High inclinations dominate the solar cycle for about 7 years around solar maximum. Dips to lower inclination occur near solar minimum, but high variance admits a wide range of inclinations throughout the cycle. Compared to the smooth solar cycle variation of the maximum latitudinal excursion of the neutral line, often treated as the tilt angle of a flat heliospheric current sheet, the noisy variation of the inclinations reflects the degree to which the neutral line deviates from a sine wave, implying warps and corrugations in the current sheet. About a third of the time the neutral line so deviates that it doubles back in longitude.

Shodhan, S.↗

NASA NTRS2004

Undersampling Correction for Array Detector-Based Satellite Spectrometers

Array detector-based instruments are now fundamental to measurements of ozone and other atmospheric trace gases from space in the ultraviolet, visible, and infrared. The present generation of such instruments suffers, to a greater or lesser degree, from undersampling of the spectra, leading to difficulties in the analysis of atmospheric radiances. We provide extended analysis of the undersampling suffered by modem satellite spectrometers, which include Global Ozone Monitoring Experiment (GOME), Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY), Ozone Monitoring Instrument (OMI), and Ozone Mapping and Profiler Suite (OMPS). The analysis includes basic undersampling, the effects of binning into separate detector pixels, and the application of high-resolution Fraunhofer spectral data to correct for undersampling in many useful cases.

Chance, Kelly↗

NASA NTRS2021

LiDAR-Inertial Based Navigation and Mapping for Precision Landing

Future lander missions will travel to ambitious, scientifically interesting locations near rough and dangerous terrain. They will need to operate with limited prior information about the terrain, and under varying lighting conditions. Landing safely and precisely in the face of these challenges is difficult for existing vision-based landing systems, which require detailed orbital reconnaissance, a priori hazard maps, and impose time-of-day restrictions on landing to ensure similar lighting conditions in orbital and descent imagery. Advanced 3D imaging LiDAR systems currently under development, and originally intended for single-scan hazard detection, have the potential to be operated continuously from altitudes of up to 5 km. Used together with existing inertial measurement units (IMUs), these sensors open a path-to-flight for a full navigation and mapping system, which could replace or augment a traditional landing sensor suite. A landing system based around these sensors can perform accurate altimetry, map-relative localization (MRL), LiDAR-inertial odometry, and map refinement in an illumination-insensitive manner, over unknown or partially known terrain. This paper outlines preliminary work on a LiDAR-inertial landing system that: estimates the spacecraft trajectory during entry, descent, and landing (EDL); and maps the topography of the terrain below, for future use in hazard detection and avoidance. An incremental, factor graph based, smoothing approach is used to solve for the maximum a posteriori trajectory of spacecraft states. Integrated IMU measurements and features tracked in adjacent range and intensity images are used to estimate motion (LiDAR-inertial odometry). LiDAR scans are binned into motion-corrected digital elevation models (DEMs), which are matched to an existing orbital topographic map to provide absolute position information (MRL). The estimated trajectory is then used to project the LiDAR scans into the map frame, creating a variable-resolution quadtree topographic map suitable for hazard detection and avoidance. Existing topographic maps from throughout the solar system (i.e., Earth, the Moon, Mars, Ceres, Vesta, Europa, Enceladus, and Eros) are upsampled for use in EDL simulations. The Mars 2020 Lander Vision System Simulator (LVSS) is extended to simulate LiDAR-inertial data for realistic EDL trajectories. Results of the algorithm operating on the simulated data are presented. Estimated spacecraft trajectory and refined map are compared to ground truth to assess estimation accuracy.

Katake, Anup↗

NASA NTRS1989

Dynamic bin packing problem

In a previous work we have defined a general architecture model for autonomous systems, which can be mapped easily to describe the functions of any automated system (SDAG-86-01). In this note, we use the model to describe the problem of thermal management in space stations. First we briefly review the architecture, then we present the environment of our application, and finally we detail the specific function for each functional block of the architecture for that environment.

Dikshit, Piyush↗

NASA NTRS2015

Daily Global Mapping of Mars Ozone Column Abundances with MARCI UV Band Imaging

Since November of 2006, The Mars Color Imager (MARCI) onboard the Mars Reconnaissance Orbiter (MRO) has obtained multiple-filter daily global images of Mars centered upon a local time (LT) of 3 pm. Ultraviolet imaging bands placed within (260 nm) and longward (320 nm) of Hartley band (240-300 nm) ozone (O3) absorption support retrievals of atmospheric ozone columns, with detection limits (approximately 1 micrometer-atm) appropriate to mapping elevated O3 abundances at low latitudes around Mars aphelion, and over mid-to-high latitudes during fall/winter/spring seasons. MARCI O3 maps for these regions reveal the detailed spatial (approximately 1 deg lat/long, for 8 x 8 pixel binned resolution) and temporal (daily, with substantial LT coverage at pole) behaviors of water vapor saturation conditions that force large variations in water vapor photolysis products (HOx-OH, HO2, and H) responsible for the catalytic destruction of O3 in the Mars atmosphere. A detailed description of the MARCI O3 data set, including measurement and retrieval characteristics, is provided in conjunction with comparisons to Mars Express SPICAM ozone measurements (Perrier, S. et al. [2006]. J. Geophys. Res. (Planets) 111) and LMD GCM simulated O3 abundances (Lefevre, F. [2004]. J. Geophys. Res. (Planets) 109). Presented aspects of the MARCI ozone mapping data set include aphelion increases in low latitude O3, dynamically evolving high latitude O3 maxima associated with planetary waves and weather fronts during northern early spring, and distinctive winter/spring O3 and CO increases within the Hellas Basin associated with transport of condensation enhanced south polar air mass. Comparisons of coincident MARCI measurements and LMD simulations for ice cloud and O3 columns are considered in the context of potential heterogeneous photochemical processes (Lefevre, F. [2008]. Nature 454, 971-975), which are not strongly evidenced in the MARCI observations. Modest interannual variations are exhibited, most notably a 20% reduction in aphelion low latitude O3 columns following the 2007 perihelic global dust storm.

Clancy, R. Todd↗

NASA NTRS1980

Limits on the possible intrinsic magnetic field of Venus

Magnetic field measurements obtained by the Pioneer Venus orbiter at low altitudes in the solar wind wake region are examined for possible surface-correlated features and any possible intrinsic magnetic moment. The field variations observed in the wake do not resemble those expected for a solar wind interaction with even a weak intrinsic magnetic field. Little orbit-to-orbit persistence of features is found in the magnetic records. The magnetic field measurements in the wake are averaged in 10 deg x 10 deg bins to minimize the effects of external field sources. In these 37 bins, the average fields appear to be randomly oriented and consistent with zero mean in the region mapped. Using these 37 averaged vector fields, a maximum intrinsic magnetic dipole moment is obtained of 4.3 + or - 2.0 x 10 to the 21st G cu cm, approximately an order of magnitude less than previous estimates. It is noted that a more conservative estimate of the probable error of the mean is 5.5 x 10 to the 21st G cu cm. The Pioneer Venus measurements are thus consistent with zero planetary moment. The present measurements are found to be far below estimates made on the basis of angular momentum, the so-called magnetic Bode's law, and far below the dynamo scaling law of Busse.

Russell, C. T.↗

NASA NTRS1994

Preliminary assessment of the accuracy and precision of TOPEX/POSEIDON altimeter data with respect to the large-scale ocean circulation

TOPEX/POSEIDON sea surface height measurements are examined for quantitative consistency with known elements of the oceanic general circulation and its variability. Project-provided corrections were accepted but are at tested as part of the overall results. The ocean was treated as static over each 10-day repeat cycle and maps constructed of the absolute sea surface topography from simple averages in 2 deg x 2 deg bins. A hybrid geoid model formed from a combination of the recent Joint Gravity Model-2 and the project-provided Ohio State University geoid was used to estimate the absolute topography in each 10-day period. Results are examined in terms of the annual average, seasonal average, seasonal variations, and variations near the repeat period. Conclusion are as follows: the orbit error is now difficult to observe, having been reduced to a level at or below the level of other error sources; the geoid dominates the error budget of the estimates of the absolute topography; the estimated seasonal cycle is consistent with prior estimates; shorter-period variability is dominated on the largest scales by an oscillation near 50 days in spherical harmonics Y(sup m)(sub 1)(theta, lambda) with an amplitude near 10 cm, close to the simplest alias of the M(sub 2) tide. This spectral peak and others visible in the periodograms support the hypothesis that the largest remaining time-dependent errors lie in the tidal models. Though discrepancies attribute to the geoid are within the formal uncertainties of the good estimates, removal of them is urgent for circulation studies. Current gross accuracy of the TOPEX/POSEIDON mission is in the range of 5-10 cm, distributed overbroad band of frequencies and wavenumbers. In finite bands, accuracies approach the 1-cm level, and expected improvements arising from extended mission duration should reduce these numbers by nearly an order of magnitude.

Wunsch, Carl↗