Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass gasification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Experimental and computational investigations of sulfur-resistant bimetallic catalysts for reforming of biomass gasification products

A combination of density functional theory (DFT) calculations and experimental studies of supported catalysts was used to identify H{sub 2}S-resistant biomass gasification product reforming catalysts. DFT calculations were used to search for bimetallic, nickel-based (1 1 1) surfaces with lower sulfur adsorption energies and enhanced ethylene adsorption energies. These metrics were used as predictors for H{sub 2}S resistance and activity toward steam reforming of ethylene, respectively. Relative to Ni, DFT studies found that the Ni/Sn surface alloy exhibited enhanced sulfur resistance and the Ni/Ru system exhibited an improved ethylene binding energy with a small increase in sulfur binding energy. A series of supported bimetallic nickel catalysts was prepared and screened under model ethylene reforming conditions and simulated biomass tar reforming conditions. The observed experimental trends in activity were consistent with theoretical predictions, with observed reforming activities in the order Ni/Ru > Ni > Ni/Sn. Interestingly, Ni/Ru showed a high level of resistance to sulfur poisoning compared with Ni. This sulfur resistance can be partly explained by trends in sulfur versus ethylene binding energy at different types of sites across the bimetallic surface.

09 BIOMASS FUELS↗

Integrated Biomass Gasification with Catalytic Partial Oxidation for Selective Tar Conversion

Biomass gasification is a flexible and efficient way of utilizing widely available domestic renewable resources. Syngas from biomass has the potential for biofuels production, which will enhance energy security and environmental benefits. Additionally, with the successful development of low Btu fuel engines (e.g. GE Jenbacher engines), syngas from biomass can be efficiently used for power/heat co-generation. However, biomass gasification has not been widely commercialized because of a number of technical/economic issues related to gasifier design and syngas cleanup. Biomass gasification, due to its scale limitation, cannot afford to use pure oxygen as the gasification agent that used in coal gasification. Because, it uses air instead of oxygen, the biomass gasification temperature is much lower than well-understood coal gasification. The low temperature leads to a lot of tar formation and the tar can gum up the downstream equipment. Thus, the biomass gasification tar removal is a critical technology challenge for all types of biomass gasifiers. This USDA/DOE funded program (award number: DE-FG36-O8GO18085) aims to develop an advanced catalytic tar conversion system that can economically and efficiently convert tar into useful light gases (such as syngas) for downstream fuel synthesis or power generation. This program has been executed by GE Global Research in Irvine, CA, in collaboration with Professor Lanny Schmidt's group at the University of Minnesota (UoMn).

09 BIOMASS FUELS↗

Modular Biomass Gasification for Co-Production of Hydrogen and Power

The overall goal of this project was to demonstrate a novel process-intensified and modular Combined Hydrogen, Heat and Power (CH 2 P) production technology, targeting commercial scales of 5-to-10-megawatt electric (MWe) equivalent of hydrogen (H 2 ). The process technology integrates a novel adaptation of the steam-iron process to produce high purity H 2 from gasification of biomass and biomass blends with a compression-ready carbon dioxide (CO 2 ) stream, enabling significant progress towards achieving $1 per kilogram (kg) cost for clean H 2 .

08 HYDROGEN↗

Modeling biomass gasification system using multistep kinetics under various oxygen–steam conditions

Biomass gasification is an effective method to convert low‐value lingocellulosic biomass into useful gas products. The ability to predict the gas composition is important to process design. In this study, simulations of biomass gasification were carried out for various feedstocks at different operating conditions, and the model results were validated using experimental data. A multistep kinetics model was developed to predict the syngas composition using different biomass feedstocks under various oxygen‐enriched air and steam conditions. The oxygen level in the gasifying agent ranged from 21% (air) to 45% (pure oxygen). Five different biomass materials were used, including pine, maple–oak mixture, seed corn, corn stover, and switchgrass. The fluidized bed gasifier was maintained at 800°C. The present kinetics model was able to predict the concentrations of H 2 , CO, CO 2 , H 2 O, CH 4 , and N 2 in the syngas, and the predicted compositions were in good agreement with the experimental data. The results show that the model was sensitive to the variation in the oxygen level, steam flow rate, and the composition of the biomass material. As the oxygen level increased, the model also predicted the increase in H 2 , CO, CH 4 , and the H 2 /CO ratio. The mechanism on improving the syngas quality was also explained by analyzing the reaction equations. The increase in hydrogen is believed to be due to the use of steam for gasification. The present model can further be integrated into the process simulation model for predicting the performance of a biorefinery to help utilize biomass energy. © 2015 American Institute of Chemical Engineers Environ Prog, 34: 1148–1155, 2015

Banerjee, Sudhanya↗

Materials Issues In Biomass Gasification

Gasification of biomass or biomass-containing streams offers a means to produce syngas that can be combusted directly or converted to higher value products. Facilities of three gasification technologies that have been put into operation have encountered issues with degradation of structural components. Our laboratory has investigated the causes of degradation of structural components of these gasifiers. In all cases, the likely causes of degradation have been determined and alternate materials identified. In some cases, these alternate materials have been put into use and found to provide improved performance. Results from examination of two types of gasifiers have been reported previously, but they are summarized in this report in order to show the parallels in materials issues for biomass gasifiers.

Keiser, Jim↗

Effect of small-scale biomass gasification at the state of refractory lining the fixed bed reactor

The article deals with the influence of biomass gasification on the condition of the refractory lining of a fixed bed reactor. The refractory lining of the gasifier is one part of the device, which significantly affects the operational reliability and durability. After removing the refractory lining of the gasifier from the experimental reactor, there was done an assessment how gasification of different kinds of biomass reflected on its condition in terms of the main factors affecting its life. Gasification of biomass is reflected on the lining, especially through sticking at the bottom of the reactor. Measures for prolonging the life of lining consist in the reduction of temperature in the reactor, in this case, in order to avoid ash fusion biomass which it is difficult for this type of gasifier.

09 BIOMASS FUELS↗

Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review

This independent review is the conclusion arrived at from data collection, document reviews, interviews and deliberation from December 2010 through April 2011 and the technical potential of Hydrogen Production Cost Estimate Using Biomass Gasification. The Panel reviewed the current H2A case (Version 2.12, Case 01D) for hydrogen production via biomass gasification and identified four principal components of hydrogen levelized cost: CapEx; feedstock costs; project financing structure; efficiency/hydrogen yield. The panel reexamined the assumptions around these components and arrived at new estimates and approaches that better reflect the current technology and business environments.

biomass gasification↗

Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review

This independent review is the conclusion arrived at from data collection, document reviews, interviews and deliberation from December 2010 through April 2011 and the technical potential of Hydrogen Production Cost Estimate Using Biomass Gasification. The Panel reviewed the current H2A case (Version 2.12, Case 01D) for hydrogen production via biomass gasification and identified four principalcomponents of hydrogen levelized cost: CapEx; feedstock costs; project financing structure; efficiency/hydrogen yield. The panel reexamined the assumptions around these components and arrived at new estimates and approaches that better reflect the current technology and business environments.

08 HYDROGEN↗

Biomass Gasification for Chemicals Production Using Chemical Looping Techniques (Final Report)

The Ohio State University (OSU) is investigating the Biomass to Syngas (BTS) chemical looping technology to produce syngas for chemical production applications from biomass under US Department of Energy (DOE) Award #DE-EE0007530. The BTS process aligns with the programmatic area of interest of “Conversion, via biological, thermal, catalytic or chemical means, of acceptable feedstocks into advanced biofuels and/or biobased products including intermediate and end-use products”. Compared to conventional biomass gasification processes, the BTS process eliminates the need for air separation units and tar reforming reactors, which leads to energy efficiency improvement and capital cost reduction. The overall objective is to ascertain the potential of biomass gasification based on the chemical looping technique through mitigation of the possible techno-economic challenges in the steps of scale up for commercialization. The scope of work consists of 1) designing, constructing and operating a 10 kWth commercially scalable sub-pilot BTS system and; 2) completing a comprehensive techno-economic analysis (TEA) of the BTS process using methanol production as an example. Over the course of the project, the project team completed the design, fabrication, and operation of a 10 kWth sub-pilot scale test unit for the BTS process. Corn cob and wood pellets were successfully tested in the unit for high purity syngas generation in extended test campaigns that totals over 200 hours. Syngas purity (H2 and CO) of >70% was achieved with a CH 4 concentration of <6%. The H 2 /CO ratio was greater than 1.8. A comprehensive techno-economic analysis was performed to compare the BTS process and a reference indirectly heated gasification process for methanol synthesis. The result, updated with experimental results for BTS process performance, shows a methanol required selling price (MSP) of $\$ $1.15/gal, compared to $1.28/gal for the reference case.

08 HYDROGEN↗

High Pressure Biomass Gasification

According to the Billion Ton Report, the U.S. has a large supply of biomass available that can supplement fossil fuels for producing chemicals and transportation fuels. Agricultural waste, forest residue, and energy crops offer potential benefits: renewable feedstock, zero to low CO 2 emissions depending on the specific source, and domestic supply availability. Biomass can be converted into chemicals and fuels using one of several approaches: (i) biological platform converts corn into ethanol by using depolymerization of cellulose to form sugars followed by fermentation, (ii) low-temperature pyrolysis to obtain bio-oils which must be treated to reduce oxygen content via HDO hydrodeoxygenation), and (iii) high temperature pyrolysis to produce syngas (CO + H 2 ). This last approach consists of producing syngas using the thermal platform which can be used to produce a variety of chemicals and fuels. The goal of this project was to develop an improved understanding of the gasification of biomass at high pressure conditions and how various gasification parameters might affect the gasification behavior. Since most downstream applications of synags conversion (e.g., alcohol synthesis, Fischer-Tropsch synthesis etc) involve utilizing high pressure catalytic processes, there is an interest in carrying out the biomass gasification at high pressure which can potentially reduce the gasifier size and subsequent downstream cleaning processes. It is traditionally accepted that high pressure should increase the gasification rates (kinetic effect). There is also precedence from coal gasification literature from the 1970s that high pressure gasification would be a beneficial route to consider. Traditional approach of using thermogravimetric analyzer (TGA) or high-pressure themogravimetric analyzer (PTGA) worked well in understanding the gasification kinetics of coal gasification which was useful in designing high pressure coal gasification processes. However, similar approach for biomass gasification was not very useful and was the impetus for this study. Specifically, we aimed this study at three broad objectives: (i) defining operating conditions at which C 2 -C 4 hydrocarbons are formed since these represent loss of carbon efficiency, (ii) understanding the formation of tar species which create downstream processing difficulties in addition of carbon efficiency loss, and (iii) kinetics of biomass gasification where it would be possible to understand the effect of operating conditions and gas phase composition.

09 BIOMASS FUELS↗

Steam-air blown bubbling fluidized bed biomass gasification (BFBBG): Multi-scale models and experimental validation

During fluidized bed biomass gasification, complex gas-solid mixing patterns and numerous chemical and physical phenomena make identification of optimal operating conditions challenging. In this work, a parametric experimental campaign was carried out alongside the development of a coupled reactor network model which successfully integrates the individually validated sub-models to predict steady-state reactor performance metrics and outputs. The experiments utilized an integrated gasification system consisting of an externally-heated, bench-scale, 4-in., 5 kWth, fluidized bed steam/air blown gasifier fed with woody biomass equipped with a molecular beam mass spectrometer to directly measure tar species. The operating temperature (750-850°C) and air/fuel equivalence ratio (ER = 0-0.157) were independently varied to isolate their effects. Elevating temperature is shown to improve the char gasification rate and reduce tar concentrations. In conclusion, air strongly impacts the composition of tar, accelerating the conversion of lighter polycyclic-aromatic hydrocarbons into soot precursors, while also improving the overall carbon conversion.

09 BIOMASS FUELS↗

Imperium/Lanzatech Syngas Fermentation Project - Biomass Gasification and Syngas Conditioning for Fermentation Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-12-474

LanzaTech and NREL will investigate the integration between biomass gasification and LanzaTech's proprietary gas fermentation process to produce ethanol and 2,3-butanediol. Using three feed materials (woody biomass, agricultural residue and herbaceous grass) NREL will produce syngas via steam indirect gasification and syngas conditioning over a range of process relevant operating conditions. The gasification temperature, steam-to-biomass ratio of the biomass feed into the gasifier, and several levels of syngas conditioning (based on temperature) will be varied to produce multiple syngas streams that will be fed directly to 10 liter seed fermenters operating with the Lanzatech organism. The NREL gasification system will then be integrated with LanzaTech's laboratory pilot unit to produce large-scale samples of ethanol and 2,3-butanediol for conversion to fuels and chemicals.

09 BIOMASS FUELS↗

Understanding Uncertainties in the Economic Feasibility of Transportation Fuel Production using Biomass Gasification and Mixed Alcohol Synthesis

This analysis evaluates uncertainties of previously conducted techno-economic analysis of transportation fuel production via biomass gasification and mixed alcohol synthesis. Two scenarios are considered: a state-of-technology scenario utilizing existing technologies and a target scenario representing future advancements in related technologies. Uncertainties of more than ten parameters are investigated, including feedstock price, internal rate of return (IRR), etc. Historical price data of these parameters are fitted with the most appropriate distribution and datasets are generated for each parameter accordingly. These data sets are then utilized to run a Monte-Carlo simulation. The results yield minimum fuel selling prices of $7.02/gal with a standard deviation of 0.49 for the state-of-technology scenario and $4.33/gal with a standard deviation of 0.42 for the target scenario respectively. Feedstock price and IRR have significant impact on the minimum fuel selling price in both scenarios. These findings are indicative of the reduction in biofuel cost and uncertainty achievable with increasing technology maturity.

Bioenergy↗

Methane and methane-carbon dioxide activated synergystic biomass gasification for hydrogen rich syngas production

In one aspect, the disclosure relates to methods for biomass gasification to produce sustainable and renewable alternatives to fossil fuels including, but not limited to syngas having a high H2 content. The method can produce an H2/CO ratio close to 2:1, which is desirable for further chemical or transportation fuel synthesis. In another aspect, the methods disclosed herein have high yields and make use of agricultural and industrial waste (e.g., hardwood pellets and grain stovers) as starting materials. In a further aspect, the methods disclosed herein can produce useful byproducts including, but not limited to, carbon nanofibers (CNF). This abstract is intended as a scanning tool for purposes of searching in the particular art and is not intended to be limiting of the present disclosure.

Hu, Jianli↗

Economic and environmental performance of biomass gasification for renewable natural gas production in the context of the U.S. natural gas supply

Bioenergy technologies offer potential for reducing greenhouse gas (GHG) emissions. One such promising technology is biomass gasification, which is the conversion of biomass into renewable natural gas (RNG) for use with a natural gas combined-cycle power generation system. However, the associated economic and emission effects need to be better understood to enable optimal decision-making and avoid missed opportunities for enhancing efficiency and increasing system circularity. This analysis explores opportunities to (1) decarbonize natural-gas-based systems and (2) leverage the extensive US natural gas infrastructure to mobilize biomass resources to achieve environmental and economic benefits. Here, in this analysis, the research team used a spatially explicit biomass logistics model (integrated with relevant biomass availability, technoeconomic analysis, and life cycle assessment information) to simulate economically optimal biomass allocation for RNG production and use for decarbonization in the United States. Results show that the United States has the potential to produce 9203 million GJ of RNG within the expected range of $\$$12–30/GJ. Further analyses tested the overall RNG production system's sensitivity to economic and emissions parameters of nine different processes. The sensitivity analysis results indicate that the median carbon abatement cost of RNG is most sensitive to changes in emissions associated with conversion processes and land use changes. These findings provide a deeper understanding of RNG's economic and emission potential for decision-making and guiding future research.

09 BIOMASS FUELS↗