Search NASA⌕ Search

SEARCH · Search NASA

Results for “block localized wave function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Exact-two-component block-localized wave function: A simple scheme for the automatic computation of relativistic ΔSCF

Block-localized wave function is a useful method for optimizing constrained determinants. In this article, we extend the generalized block-localized wave function technique to relativistic two-component framework. Optimization of excited state determinants for two-component wave functions presents a unique challenge because the excited state manifold is often quite dense with degenerate states. Furthermore, we test the degree to which certain symmetries result naturally from the ΔSCF optimization such as time reversal symmetry and symmetry with respect to the total angular momentum operator on a series of atomic systems. Variational optimizations may often break symmetry in order to lower the overall energy, just as unrestricted Hartree-Fock breaks spin symmetry. Overall, we demonstrate that time reversal symmetry is roughly maintained when using Hartree-Fock, but less so when using Kohn-Sham density functional theory. Additionally, maintaining total angular momentum symmetry appears to be system dependent and not guaranteed. Finally, we were able to trace the breaking of total angular momentum symmetry to the relaxation of core electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Out-of-Plane Sulfur Distortions in the Bi4O4S3 Superconductor

The local atomic structure of the non-magnetic layered superconductor Bi4O4S3 was investigated using neutron diffraction and pair density function (PDF) analysis. Although on average, the crystal structure is well ordered, evidence for local, out–of–plane sulfur distortions is provided, which may act as a conduit for charge transfer from the SO4 blocks into the superconducting BiS2 planes. In contrast with LaO1−xFxBiS2, no sulfur distortions were detected in the planes, which indicates that charge density wave fluctuations are not supported in Bi4O4S3.

Philip, Sharon S. (ORCID:000000031055718X)↗
DOE OSTI2025

Quantum Adiabatic Optimization with Rydberg Arrays: Localization Phenomena and Encoding Strategies

Quantum adiabatic optimization seeks to solve combinatorial problems using quantum dynamics, requiring the Hamiltonian of the system to align with the problem of interest. However, these Hamiltonians are often incompatible with the native constraints of quantum hardware, necessitating encoding strategies to map the original problem into a hardware-conformant form. While the classical overhead associated with such mappings is easily quantifiable and typically polynomial in problem size, it is much harder to quantify their overhead on the quantum algorithm, e.g., the transformation of the adiabatic timescale. In this work, we address this challenge on the concrete example of the encoding scheme proposed in [Nguyen , PRX Quantum , 010316 (2023)], which is designed to map optimization problems on arbitrarily connected graphs into Rydberg atom arrays. We consider the fundamental building blocks underlying this encoding scheme and determine the scaling of the minimum gap with system size along adiabatic protocols. Even when the original problem is trivially solvable, we find that the encoded problem can exhibit an exponentially closing minimum gap. We show that this originates from a quantum coherent effect, which gives rise to an unfavorable localization of the ground-state wave function. On the QuEra Aquila neutral atom machine, we observe such localization and its effect on the success probability of finding the correct solution to the encoded optimization problem. Finally, we propose quantum-aware modifications of the encoding scheme that avoid this quantum bottleneck and lead to an exponential improvement in the adiabatic performance. This highlights the crucial importance of accounting for quantum effects when designing strategies to encode classical problems onto quantum platforms. Published by the American Physical Society 2025

Bombieri, Lisa (ORCID:0009000950422897)↗
DOE OSTI2021

Fast and robust all-electron density functional theory calculations in solids using orthogonalized enriched finite elements

Here, we present a computationally efficient approach to perform systematically convergent real-space all-electron Kohn-Sham density functional theory calculations for solids using an enriched finite element (FE) basis. The enriched FE basis is constructed by augmenting the classical FE basis with atom-centered numerical basis functions, comprising of atomic solutions to the Kohn-Sham problem. Notably, to improve the conditioning, we orthogonalize the enrichment functions with respect to the classical FE basis, without sacrificing the locality of the resultant basis. In addition to improved conditioning, this orthogonalization procedure also renders the overlap matrix block diagonal, greatly simplifying its inversion. Subsequently, we use a Chebyshev polynomial based filtering technique to efficiently compute the occupied eigenspace in each self-consistent field iteration. We demonstrate the accuracy and efficiency of the proposed approach on periodic unit cells and supercells. The benchmark studies show a staggering 130× speedup of the orthogonalized enriched FE basis over the classical FE basis. We also present a comparison of the orthogonalized enriched FE basis with the linearized augmented plane-wave + local orbitals basis, both in terms of accuracy and efficiency. Notably, we demonstrate that the orthogonalized enriched FE basis can handle large system sizes of ~10 000 electrons. Finally, we observe good parallel scalability of our implementation with 92% efficiency at 22× speedup for a system with 620 electrons

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

New Developments and Capabilities Within WEC-Sim

WEC-Sim is an open-source software for simulating wave energy converters and has been actively developed and applied since its initial release in 2014 to simulate a wide variety of device archetypes. WEC-Sim is developed jointly by the National Renewable Energy Laboratory and Sandia National Laboratories within the MATLAB/SIMULINK environment. A general wave-to-wire model begins with a deployment site resource characterization, which is used to complete the hydrodynamic simulation of wave energy converters (WEC), with the power generation profile imported to a grid simulator to understand the influence on the local electrical network. While modeling the entire wave-to-wire is difficult and encompasses multiple time scales and physics, WEC-Sim is focused on the hydrodynamics simulation to predict, analyze, and optimize WEC dynamics and power performance. WEC-Sim simulations are performed in the time domain based on the radiation and diffraction method using hydrodynamics coefficients derived from boundary element method (BEM)-based frequency-domain potential flow solvers (e.g., WAMIT, NEMOH, Capytaine, or ANSYS-AQWA). With this level of modeling fidelity, WEC-Sim can handle floating body hydrodynamics, mechanical and electrical power generation methods, advanced control implementation, mooring systems, and other unique applications such as desalination. Additional WEC-Sim functionalities include pre-built Simulink blocks and MATLAB scripts that can simulate a wide range of floating systems and the corresponding auxiliary subsystems. The developers of WEC-Sim continue to release new versions of the software, at least annually, with the latest release in September 2022. These releases include bug fixes, updates to software documentation, as well as new features to expand WEC-Sim's capabilities to model a wide range of WEC concepts. This publication will highlight the new features added to WEC-Sim between versions 4.1.0 to 5.0.1, which spans a 2-year period from June 2020 to September 2022. New features described here include topics such as continuous integration checks, revised Morison Element and nonlinear hydro implementations, run directly from Simulink (required for hardware-in-the-loop execution), BEMIO updates to import Capytaine BEM hydrodynamics, addition of cable blocks, and new wave visualization features.

TIDAL AND WAVE POWER↗
DOE OSTI2023

New Developments and Capabilities Within WEC-Sim: Preprint

WEC-Sim is an open-source software for simulating wave energy converters, which has been actively developed and applied since its initial release in 2014 to simulate a wide variety of device archetypes. WEC-Sim is developed jointly by the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories (Sandia) within the MATLAB/SIMULINK environment. A general wave-to-wire model begins with a deployment site resource characterization, which is used to complete the hydrodynamic simulation of wave energy converters (WEC), with the power generation profile imported to a grid simulator to understand the influence on the local electrical network. While modeling the entire wave-to-wire is difficult and encompasses multiple time scales and physics, WEC-Sim is focused on the hydrodynamics simulation to predict, analyze, and optimize WEC dynamics and power performance. WEC-Sim simulations are performed in the time domain based on the radiation and diffraction method using hydrodynamics coefficients derived from boundary element method (BEM)-based frequency-domain potential flow solvers (e.g., WAMIT, NEMOH, Capytaine, or ANSYS-AQWA). With this level of modeling fidelity, WEC-Sim can handle floating body hydrodynamics, mechanical and electrical power generation methods, advanced control implementation, mooring systems, and other unique applications such as desalination. Additional WEC-Sim functionalities include pre-built Simulink blocks and MATLAB scripts that can simulate a wide range of floating systems and the corresponding auxiliary subsystems. The developers of WEC-Sim continue to release new versions of the software, at least annually, with our latest release in September 2022. These releases include bug fixes, updates to software documentation, as well as new features to expand WEC-Sim's capabilities to model a wide range of WEC concepts. This publication will highlight the new features added to WEC-Sim between versions 4.1.0 to 5.0.1 which spans over a two year period from June 2020 to September 2022. New features to be described will include topics such as continuous integration checks, revised Morison Element and nonlinear hydro implementations, run directly from Simulink (required for hardware-in-the-loop execution), BEMIO updates to import Capytaine BEM hydrodynamics, addition of cable blocks, and new wave visualization features.

TIDAL AND WAVE POWER↗
DOE OSTI2022

Recent Developments in the WEC-Sim Open-Source Design Tool: Preprint

WEC-Sim (Wave Energy Converter SIMulator) is an open-source code for simulating wave energy converters, which has been actively developed and applied to simulate a wide variety of device archetypes and has become a popular tool since its initial release in 2014. WEC-Sim is developed jointly by the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories (SNL) within the MATLAB/SIMULINK environment. Figure 1 illustrates a general wave-to-wire model which begins with a deployment site resource characterization, which is used to complete the hydrodynamic simulation of a single WEC (or array), with the power generation profile imported to a grid simulator to understand the influence on the local electrical network. While modelling the entire wave-to-wire is difficult and encompass multiple time scales and physics, WEC-Sim is focused on the hydrodynamics simulation to predict, analyze and optimize WEC dynamics and power performance. WEC-Sim simulations are performed in the time domain based on the radiation and diffraction method using hydrodynamics coefficients derived from boundary element method (BEM) based-frequency-domain potential flow solvers (e.g., WAMIT, NEMOH, Capytaine, or ANSYS-AQWA). Within this level of modeling fidelity, WEC-Sim can handle floating body hydrodynamics, mechanical and electrical power generation methods, advanced control implementation, mooring systems, and other unique applications such as desalination. Table 1 lists additional WEC-Sim functionalities, which are created using prebuilt Simulink blocks and MATLAB scripts that can simulate a wide range of floating systems and the corresponding auxiliary subsystems.

hydrodynamics modeling↗
DOE OSTI2022

Majorana modes with side features in magnet-superconductor hybrid systems

Magnet-superconductor hybrid (MSH) systems represent promising platforms to host Majorana zero modes (MZMs), the elemental building blocks for fault-tolerant quantum computers. Theoretical description of such MSH structures is mostly based on simplified models, not accounting for the complexity of real materials. Here, based on density functional theory, we derive a superconducting 80-band model to study an MSH system consisting of a magnetic manganese chain on the s wave superconductor niobium. For a wide range of values of the superconducting order parameter, the system is a topological superconductor, with MZMs exhibiting non-universal spatial patterns and a drastic accumulation of spectral weight on both sides along the magnetic chain. These side feature states can be explained by an effective model which is guided by the ab initio results. Performing scanning tunneling spectroscopy experiments on the same system, we observe a spatial structure in the low-energy local density of states that is consistent with the theoretical findings. Our results open a first-principle approach to the discovery of topological superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal Ion Fluxes Controlling Amphibian Fertilization

Mammalian oocytes undergo major changes in zinc content and localization to be fertilized, the most striking being the rapid exocytosis of over 10 billion zinc ions in what are known as zinc sparks. Here, we report that fertilization of amphibian Xenopus laevis eggs also initiates a zinc spark that progresses across the cell surface in coordination with dynamic calcium waves. This zinc exocytosis is accompanied by a newly recognized loss of intracellular manganese. Synchrotron-based X-ray fluorescence and analytical electron microscopy reveal that zinc and manganese are sequestered in a system of cortical granules that are abundant at the animal pole. Through electron-nuclear double-resonance studies, we rule out Mn2+ complexation with phosphate or nitrogenous ligands in intact eggs, but the data are consistent with a carboxylate coordination environment. Our observations suggest that zinc and manganese fluxes are a conserved feature of fertilization in vertebrates and that they function as part of a physiological block to polyspermy.

Seeler, John F.↗
DOE OSTI2025

Observable measurement-induced transitions

One of the main postulates of quantum mechanics is that measurements destroy quantum coherence (wave function collapse). Recently it was discovered that in a many-body system dilute local measurements still preserve some coherence across the entire system. As the measurement density is increased, a phase transition occurs that is characterized by the disentanglement of different parts of the system. Unfortunately, this transition is impossible to observe experimentally for macroscopic systems because it requires an exponentially costly full tomography of the many-body wave function or a comparison with the simulation on an oracle classical computer. In this work we report the discovery of another measurement-induced phase transition that can be observed experimentally if quantum dynamics can be reversed. On one side of this phase transition the quantum information encoded in some part of the Hilbert space is fully recovered after the time inversion. On the other side, all quantum information is corrupted. This transition also manifests itself as the change in the behavior of the probability to observe the same measurement outcome in the process that consists of identical blocks repeated many times. In each block the unitary evolution is followed by the measurement. On one side of the transition the probability decreases exponentially with the number of repetitions, on the other it tends to a constant as the number of repetitions is increased. We confirm the existence of the proposed phase transition through numerical simulations of realistic quantum circuits and analytical calculations using an effective random-matrix theory model.

Measurement-induced phase transitions↗
NASA NTRS2009

Compact, Miniature MMIC Receiver Modules for an MMIC Array Spectrograph

A single-pixel prototype of a W-band detector module with a digital back-end was developed to serve as a building block for large focal-plane arrays of monolithic millimeter-wave integrated circuit (MMIC) detectors. The module uses low-noise amplifiers, diode-based mixers, and a WR10 waveguide input with a coaxial local oscillator. State-of-the-art InP HEMT (high electron mobility transistor) MMIC amplifiers at the front end provide approximately 40 dB of gain. The measured noise temperature of the module, at an ambient temperature of 300 K, was found to be as low as 450 K at 95 GHz. The modules will be used to develop multiple instruments for astrophysics radio telescopes, both on the ground and in space. The prototype is being used by Stanford University to characterize noise performance at cryogenic temperatures. The goal is to achieve a 30-50 K noise temperature around 90 GHz when cooled to a 20 K ambient temperature. Further developments include characterization of the IF in-phase (I) and quadrature (Q) signals as a function of frequency to check amplitude and phase; replacing the InP low-noise amplifiers with state-of-the-art 35-nm-gate-length NGC low-noise amplifiers; interfacing the front-end module with a digital back-end spectrometer; and developing a scheme for local oscillator and IF distribution in a future array. While this MMIC is being developed for use in radio astronomy, it has the potential for use in other industries. Applications include automotive radar (both transmitters and receivers), communication links, radar systems for collision avoidance, production monitors, ground-penetrating sensors, and wireless personal networks.

Kangaslahti, Pekka P.↗
NASA NTRS2008

Digital Receiver Phase Meter

The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

Marcin, Martin↗
NASA NTRS2011

Limits on Achievable Intensity Reduction with an Optical Occulter

Deep shadowing of a normally incident plane wave by an opaque circular disk is partially negated by the formation of a region of strong intensity surrounding the axis passing normally through the disk center. This local intensity enhancement, historically referred to as the Poisson Spot (also known as the Spot of Arago), has been the principal source of difficulties in applications where a significant reduction of the incident intensity is essential. In particular, the NASA Terrestrial Planet Finder's (TPF) mission requires suppression of direct starlight by at least 10 orders of magnitude over the entire visible spectral range. One technique that has been proposed for blocking the direct starlight is to use a rotationally symmetric disk with petallike segments along its boundary. We find that, even though such configurations could, indeed, theoretically provide the desired intensity reduction, they would require unreasonably small radii of curvature at the petals' tips (in the range of micrometers). When the radii of curvature are increased to 3 mm, the intensity reduction drops to a modest 5 to 6 orders of magnitude. Given that for the NASA's TPF mission the proposed occulter radius would be on the order of 25 m, even the 3 mm radius of curvature would be too small for any practical implementation. Further increases of the radius of curvature result in progressively poorer intensity suppression. As an alternative solution we propose an apodized circular disk. We show that with an optimized apodization function, intensity reductions of at least 10 orders of magnitude can be achieved over the entire visible spectral range. Numerical results are presented for parameters appropriate to the NASA TPF mission.

Wasylkiwskyj, Wasyl↗
DOE OSTI2021

Quasi-Two-Dimensional Heterostructures (K M 1 – x Te)(LaTe 3 ) ( M = Mn and Zn) with Charge Density Waves

Layered heterostructure materials with two different functional building blocks can teach us about emergent physical properties and phenomena arising from interactions between the layers. Here, we report intergrowth compounds KLaM 1 - x Te 4 (M = Mn and Zn; $x \approx$ 0.35) featuring two chemically distinct alternating layers [LaTe 3 ] and [KM 1 - x Te]. Their crystal structures are incommensurate, determined by single X-ray diffraction for the Mn compound and a transmission electron microscope study for the Zn compound. KLaMn 1 – x Te 4 crystallizes in the orthorhombic superspace group Pmnm(01/2 gamma)s00 with lattice parameters a = 4.4815(3) Å, b = 21.6649(16) Å, and c = 4.5220(3) Å. It exhibits charge density wave order at room temperature with a modulation wave vector q = 1/2b* + 0.3478c* originating from electronic instability of Te-square nets in [LaTe 3 ] layers. The Mn analog exhibits a cluster spin glass behavior with spin freezing temperature $T_f \approx$ 5 K attributed to disordered Mn vacancies and competing magnetic interactions in the [Mn 1 - x Te] layers. The Zn analog also has charge density wave order at room temperature with a similar q-vector having the c* component similar to 0.346 confirmed by selected-area electron diffraction. Electron transfer from [KM 1 - x Te] to [LaTe 3 ] layers exists in KLaM 1 – x Te 4 , leading to an enhanced electronic specific heat coefficient. The resistivities of KLaM 1 - x Te 4 (M = Mn and Zn) exhibit metallic behavior at high temperatures and an upturn at low temperatures, suggesting partial localization of carriers in the [LaTe 3 ] layers with some degree of disorder associated with the M atom vacancies in the [M 1 - x Te] layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2010

Spinoff 2010

Topics covered include: Burnishing Techniques Strengthen Hip Implants; Signal Processing Methods Monitor Cranial Pressure; Ultraviolet-Blocking Lenses Protect, Enhance Vision; Hyperspectral Systems Increase Imaging Capabilities; Programs Model the Future of Air Traffic Management; Tail Rotor Airfoils Stabilize Helicopters, Reduce Noise; Personal Aircraft Point to the Future of Transportation; Ducted Fan Designs Lead to Potential New Vehicles; Winglets Save Billions of Dollars in Fuel Costs; Sensor Systems Collect Critical Aerodynamics Data; Coatings Extend Life of Engines and Infrastructure; Radiometers Optimize Local Weather Prediction; Energy-Efficient Systems Eliminate Icing Danger for UAVs; Rocket-Powered Parachutes Rescue Entire Planes; Technologies Advance UAVs for Science, Military; Inflatable Antennas Support Emergency Communication; Smart Sensors Assess Structural Health; Hand-Held Devices Detect Explosives and Chemical Agents; Terahertz Tools Advance Imaging for Security, Industry; LED Systems Target Plant Growth; Aerogels Insulate Against Extreme Temperatures; Image Sensors Enhance Camera Technologies; Lightweight Material Patches Allow for Quick Repairs; Nanomaterials Transform Hairstyling Tools; Do-It-Yourself Additives Recharge Auto Air Conditioning; Systems Analyze Water Quality in Real Time; Compact Radiometers Expand Climate Knowledge; Energy Servers Deliver Clean, Affordable Power; Solutions Remediate Contaminated Groundwater; Bacteria Provide Cleanup of Oil Spills, Wastewater; Reflective Coatings Protect People and Animals; Innovative Techniques Simplify Vibration Analysis; Modeling Tools Predict Flow in Fluid Dynamics; Verification Tools Secure Online Shopping, Banking; Toolsets Maintain Health of Complex Systems; Framework Resources Multiply Computing Power; Tools Automate Spacecraft Testing, Operation; GPS Software Packages Deliver Positioning Solutions; Solid-State Recorders Enhance Scientific Data Collection; Computer Models Simulate Fine Particle Dispersion; Composite Sandwich Technologies Lighten Components; Cameras Reveal Elements in the Short Wave Infrared; Deformable Mirrors Correct Optical Distortions; Stitching Techniques Advance Optics Manufacturing; Compact, Robust Chips Integrate Optical Functions; Fuel Cell Stations Automate Processes, Catalyst Testing; Onboard Systems Record Unique Videos of Space Missions; Space Research Results Purify Semiconductor Materials; and Toolkits Control Motion of Complex Robotics.

Source record↗