Search NASA⌕ Search

SEARCH · Search NASA

Results for “blockiness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Blocky craters - Implications about the lunar megaregolith

Radar, IR, and photogeologic properties of some 1310 lunar craters that have been catalogued as radar or IR anomalies, or both, are studied to determine whether a systematic difference in blocky craters exists between the lunar maria and terrae and whether this difference might be caused by a deep magaregolith of pulverized material forming the terra surface. Examination of Apollo orbital photography confirms that the radar and IR anomalies are correlated with blocky rubble around the craters, and analysis of the radar and IR data indicates systematic terra-mare differences. The data are interpreted by postulating that the maria are rock layers where craters eject boulder fields, that the terrae are covered by a relatively pulverized megaregolith at least 2 km deep, and that the terra craters eject less rocky rubble. It is concluded that blocky rubble, in the form of either actual rocks or partly consolidated blocks, contributes to the radar and IR signatures of the craters.

Thompson, T. W.↗
NASA NTRS1991

General patterns of flow field growth - Aa and blocky lavas

Lava flowfields consist of one or more flows. Four ideal emplacement regimes are recognized: that for single flows and that for flowfields dominated by (1) widening, (2) thickening, or (3) lengthening, as a result of generating new flows. Most aa and blocky lavas belong to the flowfield widening or single-flow regimes. These two regimes are analyzed assuming advance is controlled by the distal core of a flow, where motion is treated as steady, uniform, and laminar. Because of low deformation rates, the distal core is also approximated to a Newtonian fluid. Widening and, possibly, lengthening are ultimately limited by crustal resistance. After a critical cooling interval, new flows are generated from the upper reaches of the flowfield. A simple relation is derived linking flowfield dimensions and underlying slope to eruption duration, independent of terms involving gravity or lava chemistry and rheology. The relation well describes field data from several volcanoes (involving lava compositions from K phonolitic tephrite to dacite). This supports the premise that the overall growth of aa and blocky flowfields is systematic and also suggests that such growth may be predictable at timescales greater than, or similar to, the emplacement times of major flows.

Kilburn, Christopher R. J.↗
NASA NTRS1974

Problems in the interpretation of lunar mare stratigraphy and relative ages indicated by ejecta from small impact craters

The numbers of large ejecta blocks in excess of several meters in diameter ('blockiness') around the rims of small craters in southeastern Mare Serenitatis exceed those around similar craters in southern Mare Imbrium (and some other regions) at all but the final stages of crater degradation. Terrestrial explosion crater analogs, studies of impact processes, and a layered mare model suggest that the nature of the layering in the subsurface, including lavas, ejecta and buried regolith horizons, could account for the variable blockiness of crater ejecta and, possibly, for some variation in crater size-frequency distributions. Such effects would limit the reliability and utility of counting postmare craters for the purpose of estimating the relative ages of mare surfaces. Similarly, comparisons of the effects of progressive degradation on small impact craters to determine relative or absolute ages of individual craters may be limited by the influence of stratigraphy on ejecta fragment size distributions, which would in turn affect micrometeorite erosion rates and regolith production models.

Young, R. A.↗
NASA NTRS1980

Remote sensing data of SP mountain and SP lava flow in north-central Arizona

Multifrequency airborne radar image data of SP Mountain and SP flow in north-central Arizona were obtained in diverse viewing directions and direct and cross-polarization and compared with surface and aerial photography, Landsat multispectral scanner data, airborne thermal infrared imagery, surface geology, and surface roughness statistics. The extremely blocky, basaltic andesite of SP flow is brighter on direct-polarization K-band images than on cross-polarized images taken simultaneously. This effect is explained by multiple scattering and the strong wavelength dependence of polarization effects caused by the rectilinear basaltic andesite scatters. Two distinct types of surface relief on SP flow, one extremely blocky, the other subdued, are clearly discriminated on the visible and thermal wavelength images but are separable only on the longer wavelength L-band radar image data.

Schaber, G. G.↗
NASA NTRS1991

Soil crusts on Mars

Three distinct soillike materials sampled by the Viking landers (VL) on Mars are (in order of increasing strength): (1) drift; (2) crusty to cloddy; and (3) blocky. Relative strengths of these materials are manifested by footpad penetrations during landing (VL 1), depths of deep holes, motor currents during sampling, sampler backhoe penetrations, comminutor motor currents, impact pits, trench tailings, and successful acquisitions of the coarse fraction (only blocky material). Cementation by S Cl compounds probably contributes to the relative strengths. This is shown where the weight pct. of SO3 + Cl of each material is plotted against their relative strengths. A similar result is obtained using SO3 alone, but not with Cl which is deficient in VL 2 samples.

Moore, H. J.↗
NASA NTRS1999

Location and Geologic Setting for the Three U.S. Mars Landers

Super resolution of the horizon at both Viking landing sites has revealed "new" features we use for triangulation, similar to the approach used during the Mars Pathfinder Mission. We propose alternative landing site locations for both landers for which we believe the confidence is very high. Super resolution of VL-1 images also reveals some of the drift material at the site to consist of gravel-size deposits. Since our proposed location for VL-2 is NOT on the Mie ejecta blanket, the blocky surface around the lander may represent the meter-scale texture of "smooth palins" in the region. The Viking Lander panchromatic images typically offer more repeat coverage than does the IMP on Mars Pathfinder, due to the longer duration of these landed missions. Sub-pixel offsets, necessary for super resolution to work, appear to be attributable to thermal effects on the lander and settling of the lander over time. Due to the greater repeat coverage (particularly in the near and mid-fields) and all-panchromatic images, the gain in resolution by super resolution processing is better for Viking than it is with most IMP image sequences. This enhances the study of textural details near the lander and enables the identification rock and surface textures at greater distances from the lander. Discernment of stereo in super resolution im-ages is possible to great distances from the lander, but is limited by the non-rotating baseline between the two cameras and the shorter height of the cameras above the ground compared to IMP. With super resolution, details of horizon features, such as blockiness and crater rim shapes, may be better correlated with Orbiter images. A number of horizon features - craters and ridges - were identified at VL-1 during the misison, and a few hils and subtle ridges were identified at VL-2. We have added a few "new" horizon features for triangulation at the VL-2 landing site in Utopia Planitia. These features were used for independent triangulation with features visible in Viking Orbiter and MGS MOC images, though the actual location of VL-1 lies in a data dropout in the MOC image of the area. Additional information is contained in the original extended abstract.

Parker, T. J.↗
NASA NTRS2005

Comparison of Morphologies of Apollo 17 Dust Particles with Lunar Simulant, JSC-1

Lunar dust (< 20 microns) makes up approx.20 wt.% of the lunar soil. Because of the abrasive and adhering nature of lunar soil, a detailed knowledge of the morphology (size, shape and abundance) of lunar dust is important for dust mitigation on the Moon. This represents a critical step towards the establishment of long-term human presence on the Moon (Taylor et al. 2005). Machinery design for in-situ resource utilization (ISRU) on the Moon also requires detailed information on dust morphology and general physical/chemical characteristics. Here, we report a morphological study of Apollo 17 dust sample 70051 and compare it to lunar soil stimulant, JSC-1. W e have obtained SEM images of dust grains from sample 70051 soil (Fig. 1). The dust grains imaged are composed of fragments of minerals, rocks, agglutinates and glass. Most particles consist largely of agglutinitic impact glass with their typical vesicular textures (fine bubbles). All grains show sub-angular to angular shapes, commonly with sharp edges, common for crushed glass fragments. There are mainly four textures: (1) ropey-textured pieces (typical for agglutinates), (2) angular shards, (3) blocky bits, and (4) Swiss-cheese grains. This last type with its high concentration of submicron bubbles, occurs on all scales. Submicron cracks are also present in most grains. Dust-sized grains of lunar soil simulant, JSC-1, were also studied. JSC-1 is a basaltic tuff with relatively high glass content (approx.50%; McKay et al. 1994). It was initially chosen in the early 90s to approximate the geotechnical properties of the average lunar soil (Klosky et al. 1996). JSC-1 dust grains also show angular blocky and shard textures (Fig. 2), similar to those of lunar dust. However, the JSC-1 grains lack the Swiss-cheese textured particles, as well as submicron cracks and bubbles in most grains.

Liu, Yang↗
NASA NTRS2012

The Origin of Ina: Evidence for Inflated Lava Flows on the Moon

Ina is an enigmatic volcanic feature on the Moon known for its irregularly shaped mounds, the origin of which has been debated since the Apollo Missions. Three main units are observed on the floor of the depression (2.9 km across, < or =64 m deep) located at the summit of a low-shield volcano: irregularly shaped mounds up to 20 m tall, a lower unit 1 to 5 m in relief that surrounds the mounds, and blocky material. Analyses of Lunar Reconnaissance Orbiter Camera images and topography show that features in Ina are morphologically similar to terrestrial inflated lava flows. Comparison of these unusual lunar mounds and possible terrestrial analogs leads us to hypothesize that features in Ina were formed through lava flow inflation processes. While the source of the lava remains unclear, this new model suggests that as the mounds inflated, breakouts along their margins served as sources for surface flows that created the lower morphologic unit. Over time, mass wasting of both morphologic units has exposed fresh surfaces observed in the blocky unit. Ina is different than the terrestrial analogs presented in this study in that the lunar features formed within a depression, no vent sources are observed, and no cracks are observed on the mounds. However, lava flow inflation processes explain many of the morphologic relationships observed in Ina and are proposed to be analogous with inflated lava flows on Earth.

Garry, W. B.↗
NASA NTRS2014

Improved Discrimination of Volcanic Complexes, Tectonic Features, and Regolith Properties in Mare Serenitatis from Earth-Based Radar Mapping

Radar images at 70 cm wavelength show 4-5 dB variations in backscatter strength within regions of relatively uniform spectral reflectance properties in central and northern Mare Serenitatis, delineating features suggesting lava flow margins, channels, and superposition relationships. These backscatter differences are much less pronounced at 12.6 cm wavelength, consistent with a large component of the 70 cm echo arising from the rough or blocky transition zone between the mare regolith and the intact bedrock. Such deep probing is possible because the ilmenite content, which modulates microwave losses, of central Mare Serenitatis is generally low (2-3% by weight). Modeling of the radar returns from a buried interface shows that an average regolith thickness of 10m could lead to the observed shifts in 70 cm echo power with a change in TiO2 content from 2% to 3%. This thickness is consistent with estimates of regolith depth (10-15m) based on the smallest diameter for which fresh craters have obvious blocky ejecta. The 70 cm backscatter differences provide a view of mare flow-unit boundaries, channels, and lobes unseen by other remote sensing methods. A localized pyroclastic deposit associated with Rima Calippus is identified based on its low radar echo strength. Radar mapping also improves delineation of units for crater age dating and highlights a 250 km long, east-west trending feature in northern Mare Serenitatis that we suggest is a large graben flooded by late-stage mare flows.

Radar echoes↗
NASA NTRS2016

Secondary Crater-Initiated Debris Flow on the Moon

In recent work, radar circular polarization echo properties have been used to identify "secondary" craters without distinctive secondary morphologies. Because of the potential for this method to improve our knowledge of secondary crater population-in particular the effect of secondary populations on crater- derived ages based on small craters-it is important to understand the origin of radar polarization signatures associated with secondary impacts. In this paper, we utilize Lunar Reconnaissance Orbiter Camera photographs to examine the geomorphology of secondary craters with radar circular polarization ratio enhancements. Our investigation reveals evidence of dry debris flow with an impact melt component at such secondary craters. We hypothesize that these debris flows were initiated by the secondary impacts themselves, and that they have entrained blocky material ejected from the secondaries. By transporting this blocky material downrange, we propose that these debris flows (rather than solely ballistic emplacement) are responsible for the tail-like geometries of enhanced radar circular polarization ratio associated with the secondary craters investigated in this work. Evidence of debris flow was observed at both clustered and isolated secondary craters, suggesting that such flow may be a widespread occurrence, with important implications for the mixing of primary and local material in crater rays.

Martin-Wells, K. S.↗
NASA NTRS2015

Lunar Crater Ejecta: Physical Properties Revealed by Radar and Thermal Infrared Observations

We investigate the physical properties, and changes through time, of lunar impact ejecta using radar and thermal infrared data. We use data from two instruments on the Lunar Reconnaissance Orbiter (LRO) - the Diviner thermal radiometer and the Miniature Radio Frequency (Mini-RF) radar instrument - together with Earth-based radar observations. We use this multiwavelength intercomparison to constrain block sizes and to distinguish surface from buried rocks in proximal ejecta deposits. We find that radar-detectable rocks buried within the upper meter of regolith can remain undisturbed by surface processes such as micrometeorite bombardment for greater than 3 Gyr. We also investigate the thermophysical properties of radar-dark haloes, comprised of fine-grained, rock-poor ejecta distal to the blocky proximal ejecta. Using Diviner data, we confirm that the halo material is depleted in surface rocks, but show that it is otherwise thermophysically indistinct from background regolith. We also find that radar-dark haloes, like the blocky ejecta, remain visible in radar observations for craters with ages greater than 3 Ga, indicating that regolith overturn processes cannot replenish their block populations on that timescale.

Ghent, R. R.↗
NASA NTRS1972

Morphology and petrography of volcanic ashes.

Study of volcanic ash samples collected from a variety of recent eruptions using petrography, chemical analyses, and scanning electron microscopy to characterize each type and to relate ash morphology to magma composition and the type of eruption. The ashes are placed in the broad genetic categories of magmatic and phreatomagmatic. The morphology of ash particles from magmatic eruptions of high viscosity magma is governed primarily by vesicle density and shape. Ash particles from eruptions of low viscosity magmas are mostly droplets. The morphology of ash particles from phreatomagmatic eruptions is controlled by stresses within the chilled magma which result in fragmentation of the glass to form small blocky or pyramidal glass ash particles.

Heiken, G.↗
NASA NTRS1973

Evaluation of satellite remote sensing and automatic data techniques for characterization of wetlands and marshlands

The author has identified the following significant results. Using the 12S Digicol color additive viewer and eight color classification map has been produced of a portion of the study area. Channel 3 of the MSS produced the best map. Enlargements of the MSS data have been accomplished by using the Data Analysis Station. The attached film recorder has three color guns which are capable of placing 2400 square elements across a 9 inch film. It has been found that by repeating ERTS element 9 times and each scan line 13 times that a map of a scale approximately 1:62,000 can be produced as a color negative film strip. This can be contact printed to produce a color map of the scale. As yet this procedure does not correct for image skew caused by rotation which is believed to be the major source of distortion and blockiness in the image. However, the final product which has not undergone any photographic enlargement is superior to photographically enlarged maps of the same scale.

Cartmill, R. H.↗
NASA NTRS1972

Calibration of radar data from Apollo 16 results, part X

Predictions of surface and near surface blockiness using earth based radar measurements were made. Two polarizations of the radar echoes were measured - polarized and depolarized. Particular attention was given to the depolarized echoes. North Ray and South Ray Craters and a 512-m diameter lunar crater in the Flamsteed Ring were used for the study.

Zisk, S. H.↗
NASA NTRS1972

Geology of Hadley Rille.

Apollo 15 data support the concept that Hadley Rille is a giant collapsed lava tube that originated at its south end. The south half of the rille is sinuous and the bends are not structurally controlled, whereas the north half of the rille follows pre-mare structural troughs. Most of the rille has a V-shaped profile apparently formed by recession of the rims and coalescence of talus from both sides. The rille is scalloped and discontinuous locally, and the deepest parts consistently are the widest. This is a different relationship from that shown by river channels, but can instead be explained by collapse, with most extensive foundering at the deepest points. The upper 60 meters of the walls of the rille at the Apollo 15 site expose several layers of mare basalt. Most are massive units averaging at least 10 m thick; others are layered. Numerous talus blocks derived from the massive outcrops are 10 to 30 m across. The lunar flows are thus both thick and little jointed. The outcrop ledge and blocky talus derived from it are absent where the rille abuts Apennine massifs, showing that the rille cuts through the mare basalt and against massif material.

Howard, K. A.↗
NASA NTRS1974

A new nickel-base wrought superalloy for applications up to 1033 K (1400 F)

Alloy was melted from high purity raw materials and cast ingots extruded at 1422 K. Material was hot rolled to 0.013 m diameter bar stock. Partial solution heat-treatment followed by aging produced structure of fine gamma prime precipitate reinforcing gamma matrix containing coarser blocky gamma prime particles. Alloy can be processed by powder metallurgy.

Kent, W. B.↗
NASA NTRS1975

Resistance of a gamma/gamma prime - delta directionally solidified eutectic alloy to recrystallization

The lamellar directionally solidified nickel-base eutectic alloy gamma/gamma prime-delta has potential as an advanced turbine blade material. The microstructural stability of this alloy was investigated. Specimens were plastically deformed by uniform compression or Brinell indentation, then annealed between 705 and 1120 C. Microstructural changes observed after annealing included gamma prime coarsening, pinch-off and spheroidization of delta lamellae, and the appearance of an unidentified blocky phase in surface layers. All but the first of these was localized in severely deformed regions, suggesting that microstructural instability is not a serious problem in the use of this alloy.

Tewari, S. N.↗
NASA NTRS1976

Apollo experiment S-217 IR/radar study of Apollo data

An experiment using Earth based remote sensing radar, infrared eclipse, and color difference data to deduce surface properties not visible in Apollo photography is reported. The Earth based data provided information on the small scale (centimeter sized) blockiness and on the surface chemical composition (titanium and iron contents) of the lunar surface. These deduced surface properties complemented the new Apollo photography, leading to refined geologic interpretations of the lunar surface.

Thompson, T. W.↗