Search NASA⌕ Search

SEARCH · Search NASA

Results for “bottlebrush random copolymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Reversible hierarchical structure induced by solvation and temperature modulation in an ionic liquid-based random bottlebrush copolymer

Here a solvent and temperature responsive random copolymer having a polyacrylate backbone with emanating ionic liquid side chains of 1-decyl-3-methylimidazolium chloride and 1-(2-carboxyethyl)-3-imidazolium bromide grafted poly-N-isopropylacrylamide (PNIPAM) possessing bottlebrush architecture is synthesized. The bottlebrush copolymer is prepared using an uncommon route that exploits the co-assembly of two amphiphilic ionic liquid acryloyl-based monomers in 30% (w/w) water to form a lyotropic mesophase followed by photo-initiated free radical polymerization. The copolymer adopts a temperature-invariant 2D hexagonal structure as determined by SAXS in the dehydrated (de-swollen) state. The absence of thermoresponsivity is attributed to a combination of confinement coupled with insufficient solvation of the grafted PNIPAM chains. In a water-swollen state (hydrogel), loss in long range translational ordering is observed while short range temperature-dependent ordering dominates. Below the LCST of PNIPAM (<40 °C), disassociated nanoscale discoidal assemblies predominate, as determined by SAXS. At temperatures above the LCST, the particles condense to form thicker circular discs of similar diameter. Polarized optical microscopy shows the formation of 1-D liquid-crystalline fibrillar structures spanning the meso- to micro-length scales. The assembly and disassembly are fully reversible with temperature cycling. Finally, this work demonstrates the possibility of achieving self-organization over multiple length scales (panoscopic) to create complex structures from modular components using an external stimulus to control construction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Janus bottlebrush compatibilizers

Bottlebrush random copolymers (BRCPs), consisting of a random distribution of two homopolymer chains along a backbone, can segregate to the interface between two immiscible homopolymers. BRCPs undergo a reconfiguration, where each block segregates to one of the homopolymer phases, adopting a Janus-type structure, reducing the interfacial tension and promoting adhesion between the two homopolymers, thereby serving as a Janus bottlebrush copolymer (JBCP) compatibilizer. Here, we synthesized a series of JBCPs by copolymerizing deuterated or hydrogenated polystyrene (DPS/PS) and poly(tert-butyl acrylate) (PtBA) macromonomers using ruthenium benzylidene-initiated ring-opening metathesis polymerization (ROMP). Subsequent acid-catalyzed hydrolysis converted the PtBA brushes to poly(acrylic acid) (PAA). The JBCPs were then placed at the interface between DPS/PS homopolymers and poly(2-vinyl pyridine) (P2VP) homopolymers, where the degree of polymerization of the backbone (N BB ) and the grafting density (GD) of the JBCPs were varied. Neutron reflectivity (NR) was used to determine the interfacial width and segmental density distributions (including PS homopolymer, PS block, PAA block and P2VP homopolymer) across the polymer-polymer interface. Our findings indicate that the star-like JBCP with N BB = 6 produces the largest interfacial broadening. Increasing N BB to 100 (rod-like shape) and 250 (worm-like shape) reduced the interfacial broadening due to a decrease in the interactions between blocks and homopolymers by stretching of blocks. Decreasing the GD from 100% to 80% at N BB = 100 caused an increase the interfacial width, yet further decreasing the GD to 50% and 20% reduced the interfacial width, as 80% of GD may efficiently increase the flexibility of blocks and promote interactions between homopolymers, while maintaining relatively high number of blocks attached to one molecule. The interfacial conformation of JBCPs was further translated into compatibilization efficiency. Thin film morphology studies showed that only the lower N BB values (N BB = 6 and N BB = 24) and the 80% GD of N BB = 100 had bicontinuous morphologies, due to a sufficient binding energy that arrested phase separation, supported by mechanical testing using asymmetric double cantilever beam (ADCB) tests. These provide fundamental insights into the assembly behavior of JBCPs compatibilizers at homopolymer interfaces, opening strategies for the design of new BCP compatibilizers.

36 MATERIALS SCIENCE↗

Nanoporous poly(3-hexylthiophene) thin film structures from self-organization of a tunable molecular bottlebrush scaffold

The ability to widely tune the design of macromolecular bottlebrushes provides access to self-assembled nanostructures formed by microphase segregation in melt, thin film and solution that depart from structures adopted by simple linear copolymers. A series of random bottlebrush copolymers containing poly(3-hexylthiophene) (P3HT) and poly(D,L-lactide) (PLA) side chains grafted on a poly(norbornene) backbone were synthesized via ring-opening metathesis polymerization (ROMP) using the grafting through approach. P3HT side chains induce a physical aggregation of the bottlebrush copolymers upon solvent removal by vacuum drying, primarily driven by attractive π–π interactions; however, the amount of aggregation can be controlled by adjusting side chain composition or by adding linear P3HT chains to the bottlebrush copolymers. Coarse-grained molecular dynamics simulations reveal that linear P3HT chains preferentially associate with P3HT side chains of bottlebrush copolymers, which tends to reduce the aggregation. The nanoscale morphology of microphase segregated thin films created by casting P3HT–PLA random bottlebrush copolymers is highly dependent on the composition of P3HT and PLA side chains, while domain spacing of nanostructures is mainly determined by the length of the side chains. The selective removal of PLA side chains under alkaline conditions generates nanoporous P3HT structures that can be tuned by manipulating molecular design of the bottlebrush scaffold, which is affected by molecular weight and grafting density of the side chains, and their sequence. Furthermore, the ability to exploit the unusual architecture of bottlebrushes to fabricate tunable nanoporous P3HT thin film structures may be a useful way to design templates for optoelectronic applications or membranes for separations.

36 MATERIALS SCIENCE↗

Understanding interfacial segregation in polymer blend films with random and mixed side chain bottlebrush copolymer additives

Bottlebrush polymers are complex macromolecules with tunable physical properties dependent on the chemistry and architecture of both the side chains and the backbone. Prior work has demonstrated that bottlebrush polymer additives can be used to control the interfacial properties of blends with linear polymers but has not specifically addressed the effects of bottlebrush side chain microstructures. Here, using a combination of experiments and self-consistent field theory (SCFT) simulations, we investigated the effects of side chain microstructures by comparing the segregation of bottlebrush additives having random copolymer side chains with bottlebrush additives having a mixture of two different homopolymer side chain chemistries. Specifically, we synthesized bottlebrush polymers with either poly(styrene-ran-methyl methacrylate) side chains or with a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA) side chains. Furthermore, the bottlebrush additives were matched in terms of PS and PMMA compositions, and they were blended with linear PS or PMMA chains that ranged in length from shorter to longer than the bottlebrush side chains. Experiments revealed similar behaviors of the two types of bottlebrushes, with a slight preference for mixed side-chain bottlebrushes at the film surface. SCFT simulations were qualitatively consistent with experimental observations, predicting only slight differences in the segregation of bottlebrush additives driven by side chain microstructures. Specifically, these slight differences were driven by the chemistries of the bottlebrush polymer joints and side chain end-groups, which were entropically repelled and attracted to interfaces, respectively. Using SCFT, we also demonstrated that the interfacial behaviors were dominated by entropic effects with high molecular weight linear polymers, leading to enrichment of bottlebrush near interfaces. Surprisingly, the SCFT simulations showed that the chemistry of the joints connecting the bottlebrush backbones and side chains played a more significant role compared with the side chain end groups in affecting differences in surface excess of bottlebrushes with random and mixed side chains. This work provides new insights into the effects of side chain microstructure on segregation of bottlebrush polymer additives.

36 MATERIALS SCIENCE↗

Investigation of the Self-Assembly Behavior of Statistical Bottlebrush Copolymers via Self-Consistent Field Theory Simulations

Bottlebrush copolymers, a class of high-density side-chain-grafted copolymers with high molecular weights, have recently attracted extensive research attention due to the dramatic reduction of chain entanglement in these copolymers, unique self-assembly behaviors, and distinctive physical properties. In this study, we employ self-consistent field theory simulations to systemically investigate the phase behavior of statistical bottlebrush copolymers A-stat-B, an intriguing subclass of bottlebrush copolymers with random or alternating sequences of A and B side chains. We find that a broader variety of ordered mesophases can be stabilized in the melts of these copolymers relative to the more extensively studied bottlebrush block copolymers. In particular, we observe that these statistical copolymers can stabilize sphere phases over a larger range of species volume fractions than their diblock and tetrablock counterparts but require much higher segregation strength to achieve this. The sphere and hexagonally packed cylinder phases formed by conformationally symmetric statistical bottlebrush copolymers possess interesting discrete core–shell structures with the backbone and lower volume fraction side-chain species forming shells and cores, respectively. Moreover, we uncover a new strategy of stabilizing the Frank–Kasper phase A15 by introducing conformational asymmetry through different side-chain lengths and also observe deflection of order–order phase boundaries and significant mixing between the backbones and short side chains as conformational asymmetry is introduced.

36 MATERIALS SCIENCE↗

Hydrolysis-Induced Morphology Evolution of Linear and Bottlebrush Block Copolymers in Thin Films with Acid Vapor or Photoacid Generators

The self-assembly of high-χ low-N block copolymers (BCPs) can give patterns with sub-10 nm full pitch, serving as a promising alternative to photolithographic methods. Here, in this work, we synthesized poly(solketal methacrylate)-block-polystyrene copolymers, PSM-b-PS, with various volume ratios of the two blocks. After hydrolysis of the PSM block into poly(glycerol monomethacrylate), PGM, the BCPs had both lamellar and cylindrical microdomain morphologies in the bulk phase and in thin films. In addition to our previously developed solid-state hydrolysis strategy involving trifluoroacetic acid vapor, we developed a new photoinduced solid-state hydrolysis using photoacid generators, PAGs, embedded within the polymer films. After exposure to UV followed by a postexposure baking or solvent vapor annealing, the BCPs transitioned from the disordered, phase-mixed state into laterally ordered cylindrical patterns. In comparison to linear BCPs that rely on a random copolymer layer to modify interfacial interactions with the substrate to promote an orientation of the microdomains normal to the interface, we found that the microdomains in bottlebrush multiblock copolymers oriented normal to the interface absent substrate modification due to the chain architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amidine-Mediated Zwitterionic Ring-Opening Polymerization of N -Alkyl N -Carboxyanhydride: Mechanism, Kinetics, and Architecture Elucidation

Zwitterionic ring-opening polymerization (ZROP) of N-butyl N-carboxyanhydrides (Bu-NCAs) has been investigated using 1,8-diazabicycloundec-7-ene (DBU), a bicyclic amidine initiator. It was found that poly(N-butylglycine)s (PNBGs) with molecular weight (M n ) in the 3.5–32.4 kg mol –1 range and polydispersity index (PDI) in the 1.02–1.12 range can be readily obtained by systematically varying the initial monomer to initiator feed ratio. The polymerization exhibits characteristics of a controlled polymerization, as evidenced by the linear increase of polymer molecular weight with conversion and the successful enchainment experiments. Kinetic studies revealed that the reaction is first-order dependent on the monomer and the DBU concentration. The rate of initiation is comparable to that of the propagation. Random copolypeptoids of poly[(N-propargylglycine)-r-(N-butylglycine)]s [P(NPgG-r-NBG)s] were also synthesized by DBU-mediated copolymerization of Bu-NCA and N-propargyl N-carboxyanhydride (Pg-NCA). Subsequent grafting with azido-terminated poly(ethylene glycol) (PEG) produces bottlebrush copolymers. Analysis of bottlebrush copolymer samples using atomic force microscopy (AFM) revealed a surface morphology of toroid-shaped nanostructures, consistent with the polypeptoid backbone having cyclic architecture. Here, small-angle neutron scattering (SANS) characterization of the bottlebrush polymer ensemble in solution also confirms the cyclic architecture of the polypeptoid backbones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bottlebrush Block Copolymer Thin Films

The self-assembly of block copolymers (BCPs) in thin films is governed by interfacial interactions (enthalpy) between the blocks and interfaces (at both the substrate and the surface). Advantage can also be taken of entropy to control the polymer orientation. Here, we synthesized a series of bottlebrush block copolymers (BBCPs), with deuterated polystyrene (DPS) as the core block and poly­(solketal acrylate) (PSA) as the corona block, where the backbone length (N BB) and grafting densities (GDs) were varied. The hydrophobic PSA block was converted to a hydrophilic poly­(glyceryl acrylate) (PGA) block by solid-state hydrolysis, bringing the BBCP from a disordered state into an ordered state with a lamellar microdomain morphology. The orientation of the morphology as a function of distance from the interfaces was systematically investigated by atomic force microscopy (AFM), interference microscopy, grazing-incidence small-angle X-ray scattering (GISAXS), and grazing-incidence small angle neutron scattering (GISANS). For N BB = 1 (diblock BCP), a mixed lamellar orientation was found. For N BB = 5 (star-like BBCP), a vertical orientation of the lamellar microdomains was found dominantly at the interfaces that propagated into the bulk of the film due to the entropic penalty associated with constraints on the junction points. Increasing the N BB to 50 (rod-like BBCP) and 100 (worm-like BBCP) yielded a random orientation, as the side chains became overcrowded when aligned in the same direction. By reducing the grafting density (GD) of a N BB = 50 BBCP from 100% to 75% and 50% by the incorporation of spacers into the backbone, the steric hindrance of side chains is reduced markedly, facilitating a vertical orientation of the lamellar microdomains. However, the vertical orientation becomes more random within the bulk of the thin film for different BBCP architectures. By modifying the substrate with a layer of PS, the preferential interactions between the core block of the BBCP and the interfaces induce a reconfiguration of the BBCP, drawing the core block out to contact substrate directly driven by enthalpy. Under these conditions, N BB = 5 showed a predominantly parallel orientation of the lamellar microdomains with the corona block minimizing contact with the substrate. Higher N BB values of 50 and 100 showed a more random orientation of the lamellar microdomains at different depths on the PS-modified substrate. Overall, thin-film morphology was regulated by tuning the configuration of the BBCP, varying the entropic contribution to the microdomain orientation.

Chen, Zhan↗