Search NASA⌕ Search

SEARCH · Search NASA

Results for “boundary layer analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Application of a general boundary layer analysis to turbulent boundary layers subjected to strong favorable pressure gradients

Theoretical predictions of turbulent boundary layer development under the influence of strong favorable pressure gradients made using a finite-difference calculation procedure are compared to experimental data. Comparisons are presented for low speed flows with and without wall heat transfer as well as for supersonic flows with adiabatic walls. The turbulence model used is governed by an integral form of the turbulence kinetic energy equation and the results are compared with predictions made using a conventional equilibrium turbulence model based upon Prandtl's mixing length, a Clauser-type eddy viscosity model used by Cebecci and Mosinskis, and a two-equation turbulence energy model of Launder and Jones.

Kreskovsky, J. P.↗
NASA NTRS1985

Assessment of a 3-D boundary layer analysis to predict heat transfer and flow field in a turbine passage

An assessment was made of the applicability of a three dimensional boundary layer analysis of heat transfer, total pressure losses, and streamline flow patterns on the surfaces of both stationary and rotating turbine passages. In support of this effort, an analysis was developed to calculate a general nonorthogonal surface coordinate system for arbitrary three dimensional surfaces and also to calculate the boundary layer edge conditions for compressible flow using the surface Euler equations and experimental pressure distributions. Calculations are presented for the pressure, endwall, and suction surfaces of a stationary cascade and for the pressure surface of a rotating turbine blade. The results strongly indicate that the three dimensional boundary layer analysis can give good predictions of the flow field, loss, and heat transfer on the pressure, suction, and endwall surface of a gas turbine passage.

Anderson, O. L.↗
NASA NTRS1986

Three-dimensional boundary layer analysis program Blay and its application

The boundary layer calculation program (BLAY) is a program code which accurately analyzes the three-dimensional boundary layer of a wing with an undefined plane. In comparison with other preexisting programs, the BLAY is characterized by the following: (1) the time required for computation is shorter than any other; (2) the program is adaptable to a parallel processing computer; and (3) the program is associated with a secondary accuracy in the z-direction. As a boundary layer modification to transonic nonviscous flow analysis programs, it is used to adjust viscous and nonviscous interference problems repeatedly. Its efficiency is an important factor in cost reduction in aircraft designing.

Matsuno, K. I.↗
NASA NTRS1973

Unsteady turbulent boundary layer analysis

The governing equations for an unsteady turbulent boundary layer on a swept infinite cylinder, composed of a continuity equation, a pair of momentum equations and a pair of turbulent energy equations which include upstream history efforts, are solved numerically. An explicit finite difference analog to the partial differential equations is formulated and developed into a computer program. Calculations were made for a variety of unsteady flows in both two and three dimensions but primarily for two dimensional flow fields in order to first understand some of the fundamental physical aspects of unsteady turbulent boundary layers. Oscillating free stream flows without pressure gradient, oscillating retarded free stream flows and monotonically time-varying flows have all been studied for a wide frequency range. It was found that to the lowest frequency considered, the lower frequency bound being determined by economic considerations (machine time), there were significant unsteady effects on the turbulent boundary layer.

Singleton, R. E.↗
NASA NTRS1978

Boundary layer analysis of a Centaur standard shroud

An analytical boundary layer investigation was carried out in conjunction with an experimental wind tunnel test to determine the discharge characteristics of the Centaur shroud ascent vent system on the Titan/Centaur launch vehicle. This involved estimating the effect of the local boundary layers on the vent discharge for vehicle Mach numbers ranging from 0.8 to 1.56. The growth of the boundary layer along the vehicle was influenced by the interaction with flanges protruding into the flow and by the longitudinal corrugations in the vehicle surface. The effects of the flange and corrugations were treated by approximate techniques. In addition, boundary layer calculations were made for a 3 percent model of the launch vehicle compared with experimental results.

Hingst, W. R.↗
NASA NTRS1987

Solution of the surface Euler equations for accurate three-dimensional boundary-layer analysis of aerodynamic configurations

The three-dimensional boundary-layer equations in the limit as the normal coordinate tends to infinity are called the surface Euler equations. The present paper describes an accurate method for generating edge conditions for three-dimensional boundary-layer codes using these equations. The inviscid pressure distribution is first interpolated to the boundary-layer grid. The surface Euler equations are then solved with this pressure field and a prescribed set of initial and boundary conditions to yield the velocities along the two surface coordinate directions. Results for typical wing and fuselage geometries are presented. The smoothness and accuracy of the edge conditions obtained are found to be superior to the conventional interpolation procedures.

Iyer, V.↗
NASA NTRS1984

Application of a quasi-3D inviscid flow and boundary layer analysis to the hub-shroud contouring of a radial turbine

Application of a quasi-3D approach to the aerodynamic analysis of several radial turbine configurations is described. The objective was to improve the rotor aerodynamic characteristics by hub-shroud contouring. The approach relies on available 2D inviscid methods coupled with boundary layer analysis to calculate profile, mixing, and endwall losses. Windage, tip clearance, incidence, and secondary flow losses are estimated from correlations. To eliminate separation along the hub and blade suction surfaces of a baseline rotor, the analysis was also applied to three alternate hub-shroud geometries. Emphasis was on elimination an inducer velocity overshoot as well as increasing hub velocities. While separation was never eliminated, the extent of the separated area was progressively reduced. Results are presented in terms of mid-channel and blade surface velocities; kinetic energy loss coefficients; and efficiency. The calculation demonstrates a first step for a systematic approach to radial turbine design that can be used to identify and control aerodynamic characteristics that ultimately determine heat transfer and component life. Experimentation will be required to assess the extent to which flow and boundary layer behavior were predicted correctly.

Civinskas, K. C.↗
NASA NTRS1984

Application of a quasi-3D inviscid flow and boundary layer analysis to the hub-shroud contouring of a radial turbine

Application of a quasi-3D approach to the aerodynamic analysis of several radial turbine configurations is described. The objective was to improve the rotor aerodynamic characteristics by hub-shroud contouring. The approach relies on available 2D inviscid methods coupled with boundary layer analysis to calculate profile, mixing, and endwall losses. Windage, tip clearance, incidence, and secondary flow losses are estimated from correlations. To eliminate separation along the hub and blade suction surfaces of a baseline rotor, the analysis was also applied to three alternate hub-shroud geometries. Emphasis was on elimination of an inducer velocity overshoot as well as increasing hub velocities. While separation was never eliminated, the extent of the separated area was progressively reduced. Results are presented in terms of mid-channel and blade surface velocities; kinetic energy loss coefficients; and efficiency. The calculation demonstrates a first step for a systematic approach to radial turbine design that can be used to identify and control aerodynamic characteristics that ultimately determine heat transfer and component life. Experimentation will be required to assess the extent to which flow and boundary layer behavior were predicted correctly.

Civinskas, K.↗
NASA NTRS1984

F-111 natural laminar flow glove flight test data analysis and boundary layer stability analysis

An analysis of 34 selected flight test data cases from a NASA flight program incorporating a natural laminar flow airfoil into partial wing gloves on the F-111 TACT airplane is given. This analysis determined the measured location of transition from laminar to turbulent flow. The report also contains the results of a boundary layer stability analysis of 25 of the selected cases in which the crossflow (C-F) and Tollmien-Schlichting (T-S) disturbance amplification factors are correlated with the measured transition location. The chord Reynolds numbers for these cases ranges from about 23 million to 29 million, the Mach numbers ranged from 0.80 to 0.85, and the glove leading-edge sweep angles ranged from 9 deg to 25 deg. Results indicate that the maximum extent of laminar flow varies from 56% chord to 9-deg sweep on the upper surface, and from 51% chord at 16-deg sweep to 6% chord at 25-deg sweep on the lower. The results of the boundary layer stability analysis indicate that when both C-F and T-S disturbances are amplified, an interaction takes place which reduces the maximum amplification factor of either type of disturbance that can be tolerated without causing transition.

Runyan, L. J.↗
NASA NTRS1974

Boundary-layer analysis of subsonic inlet diffuser geometries for engines nacelles

Theoretical Mach number distributions and boundary-layer parameters are presented for subsonic nacelle inlet diffuser geometries with length to exit diameter ratios ranging from 0.4 to 1.6 and diffuser exit area to throat area ratios ranging from 1.1 to 2.0. The major portion of the study was done with a cubic diffuser contour with the inflection point at the midpoint of the diffuser, a diffuser throat Mach number of 0.6, and a free-stream Mach number of 0.12. Calculations were performed at both model (diffuser exit diameter, 30.5 cm) and full-scale (diffuser exit diameter, 183 cm) sizes. Separation limits were defined by establishing a separation boundary on plots of diffuser area ratio as a function of diffuser length to diameter ratio. The effects of diffuser contour, inlet lip geometry, and throat Mach number on the boundary-layer characteristics are illustrated. The major results of the study indicate that the separation boundary is shifted to greater area ratios by (1) increasing the diffuser length, (2) increasing the scale of the diffuser and, (3) moving the inflection point of the diffuser contour to or ahead of the midpoint of the diffuser.

Albers, J. A.↗
NASA NTRS1981

A quasi-three-dimensional blade surface boundary layer analysis for rotating blade rows

A quasi-three-dimensional approximation has been developed for a blade boundary layer which involves the calculation of the effect of nonzero pressure gradients, turbulent flow, and blade twist, but includes only a simple coupling between streamlines. The resulting set of equations is solved using Keller's box scheme. The solution scheme is checked against available incompressible flow solutions and then applied to a NASA low aspect ratio transonic compressor stage for which extensive experimental and computational data are available. It is found that the three-dimensional boundary layer separates significantly sooner and has a much larger influence on rotor performance than would be expected from a two-dimensional analysis.

Thompkins, W. T., Jr.↗
NASA NTRS1974

A boundary-layer analysis of atmospheric motion over a semi-elliptical surface obstruction

Flow over surface obstructions can produce adverse flying conditions for helicopters, V/STOL vehicles, etc. The disturbed boundary-layer concept is applied in approximating the localized flow field induced around a surface obstruction (modeled by a two-dimensional cylinder with elliptical cross section) by an impinging wind. The analysis concludes that: (1) localized wind-speed maxima occur at the top of a surface obstruction, which are expected in physically real flows; (2) increased elliptical aspect ratio decreases with speed within the boundary layer at the top of the ellipse; (3) increased surface roughness decreases velocity in the boundary layer; (4) Reynolds number has a negligible effect on the overall flow for the Re range considered; (5) decreased elliptical aspect ratio and increased surface roughness cause larger separation regions.

Frost, W.↗
NASA NTRSDate not supplied

Boundary Layer Analysis of Shock Tube Flows

Shock tubes offer a controlled environment to reproduce kinetic and radiative phenomena characteristic of atmospheric entry flows under ground-test conditions. The boundary layer developing behind the incident shock wave determines the available test time, influences particle residence times important for similarity scaling, and can affect radiative energy transport. In this study, we couple a quasi-1D space marcher with the compressible boundary-layer equations to numerically compute the post-shock flow in a shock frame of reference for various test gas mixtures representative of different planetary atmospheres. The solvers are individually verified against CFD simulations and analytical correlations available in the literature. Coupled solutions are computed for a finite-rate chemistry in the boundary layer and a non-catalytic isothermal wall. Results yield refined estimates of the maximum separation distance, as well as insights into concentration profiles of relevant species within the boundary layer.

Andrea Fagnani↗
NASA NTRS1985

A three-dimensional boundary-layer analysis including heat-transfer and blade-rotation effects

An analysis has been developed for calculating three-dimensional viscous flows over arbitrary bodies through the solution of complete three-dimensional boundary-layer equations. The governing equations include the effect of blade rotation and are written in nonorthogonal surface-fitted coordinates to allow maximum flexibility. A coupled finite-difference numerical scheme is used for solving the governing equations. The accuracy of this scheme has been assessed through comparisons with known analytical/experimental results for several test cases. The present analysis has then been applied to compute viscous flows over a turbine endwall and airfoil suction surface, and fairly good correlation has been obtained with available experimental data for surface heat transfer and viscous streamline skewing.

Vatsa, V. N.↗
NASA NTRS1981

Boundary-layer analysis for the convection/diffusion transition in dendritic growth

The supercooling dependence of dendritic growth kinetics under the influence of convective heat transport is investigated theoretically and experimentally with emphasis on theoretical prediction of the supercooling level at which the transition from diffusion-controlled to convection-controlled dendritic growth occurs. It is shown that the crossover between diffusive and convective transport depends on the relative thickness of the Stefan length compared with the thermal boundary layer. These lengths become equal at a supercooling which may be calculated from diffusion theory and fluid mechanics. It is also shown that the crossover supercooling varies weakly with the gravitational acceleration, melt viscosity, and the volumetric expansion coefficient.

Glicksman, M. E.↗
NASA NTRS1995

Eliminating Flow Separation and Reducing Viscous Drag Through Boundary Layer Analysis and Manipulation

As both computers and flow-analyzing equations have increased in sophistication, Computational Fluid Dynamics (CFD) has evolved into a fixture for advanced aircraft design. While CFD codes have improved in accuracy and efficiency, their ability to encompass viscous effects is lacking in certain areas. For example, current CFD codes cannot accurately predict or correct for the increased drag due to these viscous effects at some flow conditions. However, by analyzing an airfoil's turbulent boundary layer, one can predict not only flow separation via the shape factor parameter, but also viscous drag via the momentum thickness. Various codes have been written which can calculate turbulent boundary layer parameters. The goal of my research is to develop procedures for modifying an airfoil (via its local pressure distribution) to eliminate boundary layer separation and/or to reduce viscous drag. The modifications to the local pressure distribution necessary to achieve these objectives will be determined using a direct-iterative method installed into a turbulent boundary layer analyzer. Furthermore, the modifications should preserve the basic characteristics of the original airfoil.

Oser, Matthew D.↗
NASA NTRS1989

Supersonic boundary layer stability analysis with and without suction on aircraft wings

An analysis of the boundary layer and its stability with and without suction on a supersonic cruise fighter wing having biconvex 5 percent thick airfoils is conducted for a free-stream Mach number of 2.0 and an angle of attack of 4.0 deg. It is found that the largest amplification is due to the highly oblique traveling cross flow type waves, oriented approximately 80 deg without suction, and 87.5 deg with suction, from the local external velocity vector. It is concluded that with the biconvex airfoil section on the thin swept wing, this type of instability would be the likely cause of transition. The approximate values of the frequency, wave orientation angle, and wavelength/chord ratio for the most amplified disturbance are given for the cases of suction and no suction. The largest amplifications are found for highly oblique traveling crossflow type waves oriented at approximately 80 deg without suction and 87.5 deg with suction, measured from the local external velocity vector.

Agrawal, Shreekant↗