Search NASA⌕ Search

SEARCH · Search NASA

Results for “broadband radiometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Temperature sensitivity of Eppley broadband radiometers

Broadband radiometers manufactured by Eppley Laboratories Inc. are commonly used to measure irradiance from both ground-based and aircraft platforms. Namely, the pyranometer (Model PSP) measures irradiance in the .3 to 3.0 micron spectral region while the pyrgeometer (Model PIR) senses energy in the 4 to 50 micron region. The two instruments have a similar thermopile construction but different filters to achieve the appropriate spectral selection. During the fall of 1986, the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) commenced with the first cirrus Intensive Field Observation (IFO) conducted in Central Wisconsin. Due to the nature of this field project, pyranometers and pyrgeometers manufactured by Eppley were flown on NCAR's high altitude research aircraft, the Sabreliner. Inherent in the construction of these radiometers is temperature compensation circuitry designed to make the instrument sensitivity nominally constant over a temperature range from -20 to +40 C. Because the Sabreliner flew at high altitudes where temperatures were as cold as -70 C, it was necessary to determine the radiometers relative sensitivity to temperatures below -20 C and apply appropriate corrections to the FIRE radiation data set. A procedure to perform this calibration is outlined. It is meant to serve as a supplement to calibration procedures.

Smith, William L., Jr.↗
NASA NTRS1990

ERBE and CERES broadband scanning radiometers

Broadband scanning radiometers have been used extensively on earth-orbiting satellites to measure the Earth's outgoing radiation. The resulting estimates of longwave and shortwave fluxes have played an important role in helping to understand the Earth's radiant energy balance or budget. The Clouds and the Earth Radiant Energy System (CERES) experiment is expected to include instruments with three broadband scanning radiometers. The design of the CERES instrument will draw heavily from the flight-proven Earth Radiation Budget Experiment (ERBE) scanner instrument technology and will benefit from the several years of ERBE experience in mission operations and data processing. The discussion starts with a description of the scientific objectives of ERBE and CERES. The design and operational characteristics of the ERBE and CERES instrument are compared and the two ground-based data processing systems are compared. Finally, aspects of the CERES data processing which might be performed in near real-time aboard a spacecraft platform are discussed, and the types of algorithms and input data requirements for the onboard processing system are identified.

Weaver, William L.↗
NASA NTRS2007

Effects of RAM Exposure on a Low Earth Orbit BroadBand Radiometer (BBR): CERES Experience and Implications for EarthCARE

In order to best detect real changes in the Earth's climate system it is estimated that space based instrumentation measuring the global Earth Radiation Budget (ERB) must remain calibrated with a stability of 0.3% per decade. This level of stability is beyond the specified accuracy of existing ERB programs such as the Clouds and the Earth's Radiant Energy System (CERES, using three broadband radiometric scanning channels: the shortwave (SW 0.3 - 5?m), total (0.3 - >100 micron), and window (8 - 12 micron)). When in low earth orbit, it has been shown that optical response to blue-UV radiance can be reduced significantly (> 3%) due to UV hardened contaminants deposited on the surface of the optics. Evidence suggests that exposure of telescope optics to the forward looking ram direction is the primary cause of this contamination build up. With typical onboard calibration lamps emitting very low energy in the blue-UV region, this darkening is not directly measurable using standard internal calibration techniques. This paper describes a study using a model of ram exposure induced contaminant deposition and darkening, in conjunction standard established in-flight vicarious and internal calibration techniques to derive the spectral shape of the darkening to which a broadband instrument is subjected. The results of the model when applied to the CERES instruments are shown. These findings are of great importance to the EarthCARE project, whose BBR uses one broadband telescope permanently looking forward at 45 degrees, with continual exposure to the ram direction. Specific attention may therefore be needed in the design of BBR optics and on-board calibration in order to prevent or compensate for the spectral darkening seen in the CERES project.

Matthews, Grant↗
NASA NTRS1979

Analyses of earth radiation budget data from unrestricted broadband radiometers on the ESSA 7 satellite

Six months of data from the wide-field-of-view low resolution infrared radiometers on the Environmental Science Services Administration (ESSA) 7 satellite were analyzed. Earth emitted and earth reflected irradiances were computed at satellite altitude using data from a new in-flight calibration technique. Flux densitites and albedos were computed for the top of the earth's atmosphere. Monthly averages of these quantities over 100 latitude zones, each hemisphere, and the globe are presented for each month analyzed, and global distributions are presented for typical months. Emitted flux densities are generally lower and albedos higher than those of previous studies. This may be due, in part, to the fact that the ESSA 7 satellite was in a 3 p.m. Sun-synchronous orbit and some of the comparison data were obtained from satellites in 12 noon sun-synchronous orbits. The ESSA 7 detectors seem to smooth out spatial flux density variations more than scanning radiometers or wide-field-of-view fixed-plate detectors. Significant longitudinal and latitudinal variations of emitted flux density and albedo were identified in the tropics in a zone extending about + or - 25 deg in latitude.

Weaver, W. L.↗
NASA NTRS1993

Observations of aerosol by the HALOE experiment onboard UARS - A preliminary validation

The HALOE experiment measures vertical profiles of aerosol extinction at five infrared wavelengths. Four of these observations are obtained using a combination of gas filter and broadband radiometer measurements in bands of HF, HCl, CH4, and NO centered at wavelengths of 2.45, 3.40, 3.45, and 5.26 microns, respectively. The fifth is obtained using broadband radiometer measurements of CO2 transmission at 2.79 microns. Error analysis shows that the random extinction uncertainties are generally less than 10 percent in the aerosol layer, increasing to over 20 percent at the profile tops. HALOE spectral extinction measurements are shown to be consistent with predicted spectral extinction for stratospheric sulfate aerosol. Profile comparisons between HALOE and independent sources result in generally good agreement in the shape and magnitude of peak extinction and the altitude where the peak extinction occurs. In addition, global aerosol distributions obtained from the data are consistent with expected aerosol morphology. Although the validation is preliminary, the HALOE aerosol data appear to be of excellent quality and to accurately represent optical characteristics and distribution of the aerosols.

Hervig, Mark E.↗
NASA NTRS2005

A Broadband Microwave Radiometer Technique at X-band for Rain and Drop Size Distribution Estimation

Radiometric brightess temperatures below about 12 GHz provide accurate estimates of path attenuation through precipitation and cloud water. Multiple brightness temperature measurements at X-band frequencies can be used to estimate rainfall rate and parameters of the drop size distribution once correction for cloud water attenuation is made. Employing a stratiform storm model, calculations of the brightness temperatures at 9.5, 10 and 12 GHz are used to simulate estimates of path-averaged median mass diameter, number concentration and rainfall rate. The results indicate that reasonably accurate estimates of rainfall rate and information on the drop size distribution can be derived over ocean under low to moderate wind speed conditions.

Meneghini, R.↗
NASA NTRS1997

Radiometry from Space

We compare the performance of broadband radiometers with spectrally-dispersed measurements.

broadband radiometers↗
NASA NTRS2011

Use of Cold Radiometers in Several Thermal/Vacuum Tests

We have developed a low cost low temperature broadband radiometer for use with low temperature tests as a diagnostic tool for measuring stray thermal radiation and remote measurement of material properties. So far these radiometers have been used in two large thermal/vacuum tests for the James Webb Space Telescope (JWST) Project. In the first test the radiometers measured stray radiation in a test of part of the JWST sunshield, and in the second test the radiometers were used to measure the reflectivity and specularity of black Z307 painted aluminum walls on a 25 K cooled shroud. These results will be presented as well as plans for future tests to measure the residual energy through a baffled aperture in the shroud and other stray thermal energy measurements.

DiPirro, M.↗
NASA NTRS1998

Evaluation of Clouds and the Earth's Radiant Energy System (CERES) Scanner Pointing Accuracy using a Coastline Detection System

Clouds and the Earth's Radiant Energy System (CERES) is a National Aeronautics and Space Administration (NASA) investigation to examine the role of clouds in the radiative energy flow through the Earth-atmosphere system. The first CERES scanning radiometer was launched on November 27, 1997 into a 35 inclination, 350 km altitude orbit, on the Tropical Rainfall Measuring Mission (TRMM) spacecraft. The CERES instrument consists of a three channel scanning broadband radiometer. The spectral bands measure shortwave (0.3 - 5 microns), window (8 - 12 microns), and total (0.3 - 100 microns) radiation reflected or emitted from the Earth-atmosphere system. Each Earth viewing measurement is geolocated to the Earth fixed coordinate system using satellite ephemeris, Earth rotation and geoid, and instrument pointing data. The interactive CERES coastline detection system is used to assess the accuracy of the CERES geolocation process. By analyzing radiative flux gradients at the boundaries of ocean and land masses, the accuracy of the scanner measurement locations may be derived for the CERES/TRMM instrument/satellite system. The resulting CERES measurement location errors are within 10% of the nadir footprint size. Precise pointing knowledge of the Visible and Infrared Scanner (VIRS) is required for convolution of cloud properties onto the CERES footprint; initial VIRS coastline results are included.

Currey, Chris↗
NASA NTRS2009

CERES FM-5 on the NPP Spacecraft: Continuing the Earth Radiation Budget Climate Data Record

The Clouds and the Earth's Radiant Energy System (CERES) Flight Model-5 (FM-5) instrument will fly on the NPOESS Preparatory Project (NPP) spacecraft, which has a launch-readiness date in June, 2010. This mission will continue the critical Earth Radiation Budget Climate Data Record (CDR) begun by the Earth Radiation Budget Experiment (ERBE) instruments in the mid 1980 s and continued by the CERES instruments currently flying on the EOS Terra and Aqua spacecraft. Ground calibrations have been completed for FM-5 and the instrument has been delivered for integration to the spacecraft Rigorous pre-launch ground calibration is performed on each CERES unit to achieve an accuracy goal of 1% for SW flux and 0.5% for outgoing LW flux. Any ground to flight or in-flight changes in radiometer response is monitored using a protocol employing both onboard and vicarious calibration sources and experiments. Recent studies of FM-1 through FM-4 data have shown that the SW response of space based broadband radiometers can change dramatically due to optical contamination. With these changes having most impact on optical response to blue-to UV radiance, where tungsten lamps are largely devoid of output, such changes are hard to monitor accurately using existing on-board sources. This paper outlines the lessons learned on the existing CERES sensors from 30+ years of flight experience and presents a radiometric protocol to be implemented on the FM-5 instrument to ensure that its performance exceeds the stated calibration and stability goals.

Priestly, Kory↗
NASA NTRS1992

Thermistor bolometer scanning radiometer - Applications and flight experience

Scanning radiometers aboard both high-altitude sun-synchronous polar orbit and low altitude equatorial orbit spacecraft have conducted measurements of the earth's long-wave radiation. Attention is presently given to the Earth Radiation Budget Satellite Experiment instruments, which are designed to measure earth radiance with an absolute radiometric error of less than 1 percent. The scanner instruments consists of three broadband radiometer channels employing thermistor bolometers as sensing elements; these radiometers repeatedly scan the earth from limb to limb every 4 sec, generating contiguous pixels on the earth's surface.

Kopia, Leonard P.↗
NASA NTRS1990

Earth Radiation Budget Experiment (ERBE) scanner instrument

Orbital measurements of the earth's longwave emitted radiation, and the sun's radiation reflected by the earth are being made by scanning radiometers on three spacecraft platforms in both high altitude sun-synchronous polar (833 km) and low altitude (600 km) equatorial orbits. These ERBE instruments were carried aboard two TIROS ATN satellites (NOAA-9 and -10) in December 1984, and September 1986, and on the Earth Radiation Budget Satellite launched from Space Shuttle mission 41-G in October 1984. Electronic problems with the scanners on all platforms have halted the reception of data after surpassing the scanner design life. The ERBE instruments have been designed to measure the radiance from earth with an absolute radiometric error of less than one percent. The scanner instrument consists of three broadband radiometer channels, shortwave, 0.25 micron to 3.5 microns, longwave 5.0 to 50 microns; and total, 0.25 microns to more than 50 microns, and use thermistor bolometers as sensing elements. This paper describes the design and operation of the ERBE scanner, an overview of the ground calibration approach, the in-flight calibration stability, and an analysis of on-orbit anomalous behavior.

Kopia, Leonard P.↗
NASA NTRSDate not supplied

MARS 2020 Backshell Radiative Heating Measurement and Shock Tube Verification

In February 2021, the Perseverance rover was brought to the surface of Mars by the Mars 2020 mission. A feature of the Mars 2020 capsule was instrumentation to measure its entry, descent and landing (EDL) with the so-called Mars EDL Instrumentation 2 (MEDLI2) [1]. The MEDLI2 introduced, among other things, backshell instrumentation, including a broadband radiometer. The radiometer was mounted on the leeside of the vehicle next to thermocouple plugs and a heat flux gauge. The data returned by the leeside MEDLI2 heat flux gauge is largely analogous to that measured by the COMARS gauge flown on the ExoMars Schiaparelli [2] entry in that it is measuring heat flux in an area that is entirely dominated by radiative heating. The COMARS measurement provided excellent validation of backshell radiative heating models for Mars entry, albeit at a limited number of points [3]. The MEDLI2 heat flux gauge measurement effectively confirmed the quality of the prediction, extended over the full trajectory, as will be presented in this paper. The MEDLI2 radiometer,however, was blocked by ablation products and suffered a loss of half of its signal. The second backshell heat flux gauge installed on the windside of the vehicle was also well predicted, although the heating had both radiative and convective contributions. It was desired to reproduce the conditions of the Mars 2020 entry via ground testing in the Electric Arc Shock Tube (EAST) at NASA Ames. Tests to verify stagnation line heating were previously reported in EAST, confirming the presence of shock layer radiation as the major discrepancy in heatshield temperature modelling [4]. Therefore, tests for stagnation line heating were not repeated. Instead, the shock tube informed bias method [5, 6] was used to identify test conditions that may produce similarity to streamlines that pass around the backside of the vehicle and are responsible for the radiation observed at the two heat flux gauge locations. This method was used to identify a range of velocities and densities in the shock tube that are relevant for confirming the radiative environment encountered. This paper reports the results obtained in the 10 cm diameter EAST shock tube, corresponding to later trajectory points at ambient pressures of 1.1-2.0 Torr and velocities from 1.2-3.5 km/s. The test series employed two primary diagnostics: emission spectroscopy and tunable diode laser absorption spectroscopy (TDLAS). The emission spectroscopy performed broadband measurements of the radiative emission of the 4.3 and 2.7 m bands of CO2 at flight similar conditions, obtaining both spectral and spatial data corresponding to the relaxation behind the shock front. The TDLAS measured the absorption of several lines of CO and CO2 and obtains species number densities and temperatures as a function of time behind the shock front. This paper will review highlights of this test series and analyses of the emission and absorption data. While the datasets generally show good agreement with predictions, a few discrepancies and items for additional investigation are identified and will be discussed

Brett A Cruden↗
DOE OSTI2025

Comparison of CERES SYN1deg Radiative Fluxes with Those Derived from Observations at the ARM ENA Site

Profiles of radiative fluxes simulated from thermodynamic and cloud observations made at the Atmospheric Radiation Measurement (ARM) eastern North Atlantic (ENA) site for a 6-yr period are termed as ENARad. ENARad radiative fluxes are compared to those from the Clouds and the Earth’s Radiant Energy System (CERES) 1°-resolution synoptic product (SYN1deg)-simulated radiative flux profiles as well as the CERES instrument observed top-of-the-atmosphere (TOA) fluxes and ground site broadband radiometer measurements. Monthly average differences between ENARad and surface radiometer reported fluxes and differences between ENARad, SYN1deg, and observed fluxes at TOA were statistically insignificant. SYN1deg significantly overestimated surface downwelling shortwave flux by 12 ± 52 W m −2 and surface downwelling longwave flux by 5 ± 20 W m −2 on monthly time scales. Such overestimations were traced to a moister and warmer subcloud layer, a drier cloud layer, and a moister and colder above-cloud-free troposphere in the ancillary thermodynamic and cloud properties used by SYN1deg than observed. Similarly, low-cloud coverage, boundaries, and liquid water paths utilized by SYN1deg were also significantly higher than observed. Intramodel differences in the hourly values of shortwave fluxes exceeded 100 W m−2 at the TOA and the surface. These differences were also due to inaccuracies in the representation of low-cloud properties within the SYN1deg product relative to those determined by ENA ARM instrumentation and used as ENARad ancillary data. Results presented are relevant to investigations employing the CERES SYN1deg data product, studies that estimate radiative fluxes from surface-based or satellite-borne observations, and comparative analyses of radiative fluxes derived using different methodological approaches.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1986

Data inversion algorithm development for the hologen occultation experiment

The successful retrieval of atmospheric parameters from radiometric measurement requires not only the ability to do ideal radiometric calculations, but also a detailed understanding of instrument characteristics. Therefore a considerable amount of time was spent in instrument characterization in the form of test data analysis and mathematical formulation. Analyses of solar-to-reference interference (electrical cross-talk), detector nonuniformity, instrument balance error, electronic filter time-constants and noise character were conducted. A second area of effort was the development of techniques for the ideal radiometric calculations required for the Halogen Occultation Experiment (HALOE) data reduction. The computer code for these calculations must be extremely complex and fast. A scheme for meeting these requirements was defined and the algorithms needed form implementation are currently under development. A third area of work included consulting on the implementation of the Emissivity Growth Approximation (EGA) method of absorption calculation into a HALOE broadband radiometer channel retrieval algorithm.

Gordley, Larry L.↗
NASA NTRS1989

Annual and interannual variations of Earth-emitted radiation based on a 10-year data set

The method of empirical orthogonal functions (EOF) was applied to a 10-year data set of outgoing longwave radiation. Spherical harmonic functions are used as a basis set for producing equal area map results. The following findings are noted. The first EOF accounts for 66 percent of the variance. After that, each EOF accounts for only a small variance, forming a slowly converging series. The first two EOF's describe mainly the annual cycle. The third EOF is primarily the semiannual cycle although many other EOF's also contain significant semiannual parts. These results reaffirm those based on a shorter data set. In addition, a much stronger spring/fall mode was found in the central equatorial Pacific Ocean for the second EOF than was found earlier. This difference is attributed to the use of broadband radiometer data which were available for the present study. The earlier study used data from a window channel instrument which is not as sensitive to water vapor variations. The fourth EOF describes much of the 1976 to 1977 and 1982 to 1983 ENSO phenomena. There is typically a gap in the spectrum between a semiannual peak and the annual cycle for all but the first EOF. A semiannual OLR dipole straddles the Asian-Australian monsoon track.

Bess, T. Dale↗
NASA NTRS1989

Infrared observations of the Neptunian system

Voyager 2's IR observations of Neptune encompass thermal emissions and broadband radiometer measurements of reflected solar radiation. Temperature maps were obtained for the planet between 80 deg S and 30 deg N for two atmospheric layers, one in the lower stratosphere and the other in the troposphere. The relatively warm pole and equator, with cooler midlatitudes, are qualitatively similar to Uranus, despite the two planets' very different obliquities and internal heat fluxes. Powerful wavelike longitudinal thermal structure is noted, of which some appears to be associated with the Great Dark Spot; a localized cold region uncorrelated with any visible feature is found in the lower stratosphere.

Conrath, B.↗
NASA NTRS1994

Rapid computation of spectrally integrated non-local thermodynamic equilibrium limb emission

The interpretation of infrared radiance measurements made by satellite-borne limb-scanning broadband radiometers requires accurate and computationally fast techniques with which to evaluate the equation of radiative transfer. This requirement is made even more stringent when analyzing measurements of non-local thermodynamic equilibrium (non-LTE) emission from the terrestrial mesosphere and lower thermosphere. In principle, line-by-line calculations which explicitly account for the departure from thermodynamic equilibrium in both the source functions and the transmittances are necessary. In this paper we extend the emissivity growth approximation (EGA) technique developed for local thermodynamic equilibrium (LTE) limb radiance for the molecular oxygen dayglow (1.27 micrometers and 762 nm), ozone and carbon dioxide in the 9- to 11-micrometer spectral interval, carbon monoxide (4.6 micrometers), nitric oxide (5.3 micrometers), and the carbon dioxide bands (15 micrometers) are presented. Using the non-LTE form of the EGA, the spectrally integrated limb emission is calculated for 35 tangent heights in the mesosphere and lower thermosphere (a total of 1200 atmospheric layers) with line-by-line accuracy in approximately 0.35 s of CPU time on readily available desktop computer hardware, while the corresponding line-by-line calculations may require several minutes. The non-LTE EGA technique will allow kinetic temperature and minor constituend retrieval algorithms to readily include non-LTE efects limited only by the a priori knowledge of the departure from LTE in the observed bands.

Mlynczak, Martin G.↗