Search NASA⌕ Search

SEARCH · Search NASA

Results for “bullet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Cosmic bullets as particle accelerators and radio sources

We have simulated in two dimensions the dynamical evolution of dense gas clouds(`cosmic bullets') moving supersonically through a uniform low-density medium. The diffusive shock acceleration of relativistic protons (cosmic rays) and their dynamical feedback on the background flow are included by the two-fluid model for this process. The acceleration of relativistic electrons is approximated by a test-particle model, and a passive magnetic field is followed by a simple advection scheme. Strong bow shocks, with Mach numbers similar to that of a bullet's motion, are the most important particle accelerators in the flow, while tail shocks and shocks inside the bullets do not play generally significant roles in this regard. For our simulation parameters, approximately greater than 10% of the initial bullet kinetic energy is converted to a combination of internal energy of gas and cosmic-ray protons by the time the bullets begin to be disrupted. Characteristically, the cosmic rays gain several percent of the available kinetic energy. Bullet destruction on timescales only a little larger than the ram pressure bullet crushing time begins in response to Kelvin-Helmholtz and especially to Rayleigh-Taylor instabilities along the forward bullet surface. For dense bullets this happens before the bullet is stopped by ram pressure. According to our simple model for synchrotron emission from relativistic electrons accelerated and transported within the flows, that emission increases rapidly as the bullet begins to fragment, when it is strongly dominated by field enhancement in sheared flows. Synchrotron emission from the acceleration region within the bow shock is, by contrast, much weaker.

Jones, T. W.↗
NASA NTRS1984

Detailed studies of the dynamics and energetics of coronal bullets

Coronal bullets are small ejecta of cool, dense plasma observed to accelerate through the solar atmosphere from 20 to 450 km/s. The NRL Dynamic Flux Tube Model has been used to simulate the evolving physical properties of these dynamic events. The present calculations utilize an adaptive-gridding technique to resolve the fine structure within and around the bullets. In this work, an identification was made of a component of shocked plasma which piles up ahead of the bullet and eventually dominates both the dynamics and heating of the original bullet mass. The observational consequences of this shocked component are discussed in terms of the available HRTS EUV data, and suggestions are made for optimizing future observations of this phenomenon. An investigation has also been conducted of the structure of the bullet material visible in EUV spectral lines and the observable characteristics of the EUV-emitting plasma. Finally, the most likely mechanisms for accelerating the bullets, as well as favorable sites of origin are evaluated.

Karpen, J. T.↗
NASA NTRS1991

Constraints on the physical properties of optical bullets in SS 433

The present study discusses possible mechanisms for continuously heating the H-alpha emitting bullets of SS 433 out to distances of 5 x 10 to the 14th cm and for turning off this emission at 10 to the 15th. Various observational contraints are used to establish bounds on permissible solutions in terms of the two key bullet parameters, mass, and angular radius seen from the central source. The analysis is carried out for the mathematically simplest case of uniform spherical bullets. For radiative heat of such bullets by starlight, solutions are found to exist only for the very massive bullets with about 0.03 radians, which are highly implausible on the grounds of the large implied mean kinetic luminosity of about 10 to the 41st ergs/s. It is concluded that collisional interaction is the most likely mechanism for heating the optical bullets of SS 433. The effects of these constraints being fragmented rather than uniform, and being elongated rather than spherical are discussed.

Brown, John C.↗
NASA NTRS1982

The dynamics of accelerating coronal bullets

Results are presented of computer simulations of the jets that accelerate through the corona at velocities of 50 to 400 km/s. Particular emphasis is placed on the sensitivity of the induced acceleration to the form in which energy is put into the system. A comparison is made between the observed and predicted physical characteristics of the high-velocity bullets; the potential contribution of the bullets to the mass and energy balance of the solar corona is considered. It is found that the velocity and temperature evolution of the bullets can be modeled successfully by assuming energy input in the form of an external force, pushing continuously on the ejected material. From the physical characteristics of the model bullets and the energy input required to reproduce the observations, it is concluded that the bullets may constitute a significant fraction of the coronal mass flux but only a negligible component of the coronal energy budget.

Karpen, J. T.↗
NASA NTRS1994

The Balsa bullet: A high speed, low-cost general aviation aircraft for Aeroworld

The Balsa Bullet is a high speed, low cost six passenger general aviation aircraft. It will cruise at a speed of 55 ft/s with a maximum speed of 75 ft/s for distances in excess of 27000 feet. This range and speed combination provide The Balsa Bullet with the capability to service any two existing airports in Aeroworld in an efficient and timely manner. Overall, three major design drivers have been identified by the design team. The first is to provide a low cost airplane to the Aeroworld market. Maintaining the low cost objective will not simply meet the mission objective, but will also make the Bullet an economically viable option for a wide number of consumers. The Balsa Bullet has a total manufacturing cost of $1000 with a price to the consumer of only $2562. The second major driver is high speed performance. Once again this driver exists not only to meet the mission objective given Long Shot Aeronautics but it provides a desirable feature to the consumer, pride in owning the fastest aircraft in Aeroworld. The third design driver identified is the capability to service any runway in Aeroworld necessitating the ability to takeoff within 28 ft, the length of the shortest runways in Aeroworld. These design drivers provide three great reasons for the general public to purchase a Bullet.

Eastland, Kevin↗
NASA NTRS1997

Photonic Switching Devices Using Light Bullets

The present invention is directed toward a unique ultra-fast, all-optical switching device or switch made with readily available, relatively inexpensive, highly nonlinear photonic glasses. These photonic glasses have a sufficiently negative group velocity dispersion and high nonlinear index of refraction to support stable light bullets. The light bullets counterpropagate through, and interact within the waveguide to selectively change each others' directions of propagation into predetermined channels. In one embodiment, the switch utilizes a rectangularly planar slab waveguide, and further includes two central channels and a plurality of lateral channels for guiding the light bullets into and out of the waveguide. One advantage presented by the present all-optical switching device lies in its practical use of light bullets, thus preventing the degeneration of the pulses due to dispersion and diffraction at the front and back of the pulses. Another feature of the switching device is the relative insensitivity of the collision process to the time difference in which the counter-propagating pulses enter the waveguide. since. contrary to conventional co-propagating spatial solitons, the relative phase of the colliding pulses does not affect the interaction of these pulses. Yet another feature of the present all-optical switching device is the selection of the light pulse parameters which enables the generation of light bullets in highly nonlinear glasses.

Goorjian, Peter M.↗
NASA NTRS1999

Photonic Switching Devices Using Light Bullets

A unique ultra-fast, all-optical switching device or switch is made with readily available, relatively inexpensive, highly nonlinear optical materials. which includes highly nonlinear optical glasses, semiconductor crystals and/or multiple quantum well semiconductor materials. At the specified wavelengths. these optical materials have a sufficiently negative group velocity dispersion and high nonlinear index of refraction to support stable light bullets. The light bullets counter-propagate through, and interact within the waveguide to selectively change each others' directions of propagation into predetermined channels. In one embodiment, the switch utilizes a rectangularly planar slab waveguide. and further includes two central channels and a plurality of lateral channels for guiding the light bullets into and out of the waveguide. An advantage of the present all-optical switching device lies in its practical use of light bullets, thus preventing the degeneration of the pulses due to dispersion and diffraction at the front and back of the pulses. Another advantage of the switching device is the relative insensitivity of the collision process to the time difference in which the counter-propagating pulses enter the waveguide. since. contrary to conventional co-propagating spatial solitons, the relative phase of the colliding pulses does not affect the interaction of these pulses. Yet another feature of the present all-optical switching device is the selection of the light pulse parameters which enables the generation of light bullets in nonlinear optical materials. including highly nonlinear optical glasses and semiconductor materials such as semiconductor crystals and/or multiple quantum well semiconductor materials.

Goorjian, Peter M.↗
DOE OSTI2020

Interference effects in the formation of the light bullet spectrum under axicon focusing

Specific features of the anti-Stokes band of the light bullet supercontinuum spectrum under filamentation of 1900-nm femtosecond pulses, focused by an axicon in fused silica and calcium fluoride, have been experimentally, numerically, and analytically investigated. It is found that the formation of two or more light bullets in a filament leads to modulation of spectral components’ intensity. The oscillation period of spectral components, defined as the wavelength interval between adjacent intensity minima, decreases with decreasing their wavelength. On a logarithmic scale, the relative change in the oscillation period in the spectrum is proportional to the spectral component wavelength and is independent of the pulse energy and the position of the light bullet formation region in the filament. It is established that the modulation in the spectrum is due to the interference of the broadband supercontinuum emitted by light bullets, and its period decreases with increasing interval between them. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Path length and spectrum of single-cycle mid-IR light bullets in transparent dielectrics

Filamentation of femtosecond laser radiation with a wavelength of 800 – 3900 nm and a power slightly exceeding the critical self-focusing power is studied using the spectral method and the method of laser coloration in LiF crystal. It is found that the length of a filament formed in the single-pulse regime increases with increasing excitation wavelength from a few tens of micrometres at 80 nm to hundreds of micrometres at 3900 nm. In the spectral region of anomalous group velocity dispersion, starting from 2600 nm, the initially smooth luminescence profile of the long-lived induced colour centres acquires a periodic structure, demonstrating the formation of a light bullet with a duration of about one cycle of the light field oscillation and a diameter smaller than 10 μm. The path length of such bullets does not exceed 0.5 mm in the single-pulse regime and 2.7 mm in the waveguide regime. A consequence of periodic modulation of the bullet light field in the process of propagation, observed experimentally and confirmed by calculations, is the appearance of sidebands near the excitation wavelength, as well as the appearance of visible spectral components in the supercontinuum radiation, whose angular divergence increases with increasing wavelength. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Similarity parameter for the process of mid-IR light bullet formation

We study the influence of the ratio of diffraction and dispersion lengths of a femtosecond mid-IR wave packet on the filamentation threshold power and the light bullet (LB) formation upon nonlinear optical interaction with solid-state dielectrics under the conditions of anomalous group velocity dispersion. It is found that the ratio of the threshold power of filamentation and LB formation to the critical power of stationary self-focusing is independent of the radiation wavelength and the medium characteristics and is determined by the similarity parameter, equal to the ratio of the diffraction length to the dispersion one. With an increase in the similarity parameter, the threshold power of filamentation and light bullet formation increases. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2019

An ALMA+ACA measurement of the shock in the Bullet Cluster

Context: The thermal Sunyaev-Zeldovich (SZ) effect presents a relatively new tool for characterizing galaxy cluster merger shocks, traditionally studied through X-ray observations. Widely regarded as the “textbook example” of a cluster merger bow shock, the western, most-prominent shock front in the Bullet Cluster (1E0657-56) represents the ideal test case for such an SZ study. Aims: We aim to characterize the shock properties using deep, high-resolution interferometric SZ effect observations in combination with priors from an independent X-ray analysis. Methods: Our analysis technique relies on the reconstruction of a parametric model for the SZ signal by directly and jointly fitting data from the Atacama Large Millimeter/submillimeter Array (ALMA) and Atacama Compact Array (ACA) in Fourier space. Results: The ALMA+ACA data are primarily sensitive to the electron pressure difference across the shock front. To estimate the shock Mach number M, this difference can be combined with the value for the upstream electron pressure derived from an independent Chandra X-ray analysis. In the case of instantaneous electron-ion temperature equilibration, we find M = 2.08 (+0.12,−0.12), in ≈ 2.4σ tension with the independent constraint from Chandra, M(X)= 2.74 ± 0.25. The assumption of purely adiabatic electron temperature change across the shock leads to M = 2.53 (+0.33,−0.25), in better agreement with the X-ray estimate M(X) = 2.57 ± 0.23 derived for the same heating scenario. Conclusion: We have demonstrated that interferometric observations of the thermal SZ effect provide constraints on the properties of the shock in the Bullet Cluster that are highly complementary to X-ray observations. The combination of X-ray and SZ data yields a powerful probe of the shock properties, capable of measuring M and addressing the question of electron-ion equilibration in cluster shocks. Our analysis is however limited by systematics related to the overall cluster geometry and the complexity of the post-shock gas distribution. To overcome these limitations, a simultaneous, joint-likelihood analysis of SZ and X-ray data is needed.

Luca Di Mascolo↗
DOE OSTI2022

REBCO -- a silver bullet for our next high-field magnet and collider budget?

High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REBCO coated conductor can address both the technical and cost issues, a silver bullet to lay both monsters to rest. The challenges and unknowns, however, can be too arduous to make the silver bullet. We lay out a potential road forward and suggest key action items. As a contribution from the accelerator community, we attempt to clarify for our theorist and experimenter colleagues a few aspects about the future high-field superconducting magnets. We hope to stimulate an effective plan for the 2023 P5 process that can lead to a cost-effective high-field magnet technology for future colliders and the exciting physics they can steward.

43 PARTICLE ACCELERATORS↗
NASA NTRS1979

Interstellar bullets - H2O masers and Herbig-Haro objects

The paper considers the energy input to H2O masers in a dense molecular cloud and analyzes the response time scales for both collisional and radiative pump models. Specific mechanisms for magnetic energy input are given. The evolution of dense H2O maser clouds is studied in the environment of a young pre-main-sequence star that has developed an appreciable supersonic wind. It is shown that compact clouds can be ejected at high velocity to distances of order 1 pc. It is suggested that these clouds (referred to as interstellar bullets) might explain the phenomena of Herbig-Haro objects and high-velocity gas motions observed near compact infrared objects.

Norman, C.↗
NASA NTRS1990

Video camera system for locating bullet holes in targets at a ballistics tunnel

A system consisting of a single charge coupled device (CCD) video camera, computer controlled video digitizer, and software to automate the measurement was developed to measure the location of bullet holes in targets at the International Shooters Development Fund (ISDF)/NASA Ballistics Tunnel. The camera/digitizer system is a crucial component of a highly instrumented indoor 50 meter rifle range which is being constructed to support development of wind resistant, ultra match ammunition. The system was designed to take data rapidly (10 sec between shoots) and automatically with little operator intervention. The system description, measurement concept, and procedure are presented along with laboratory tests of repeatability and bias error. The long term (1 hour) repeatability of the system was found to be 4 microns (one standard deviation) at the target and the bias error was found to be less than 50 microns. An analysis of potential errors and a technique for calibration of the system are presented.

Burner, A. W.↗
NASA NTRS1993

Immunoconjugates: Magic Bullets for Cancer Therapy?

Conjugating cytotoxic agents to antibodies allows for site-specific delivery of the agent to tumor cells and should provide increased efficacy and reduced non-specific toxicity. These site-specific cytotoxic agents are known as immunoconjugates or 'magic bullets' and have demonstrated great promise as therapeutic agents for cancer and other diseases. The historical developments and future potential of this new approach to cancer therapy are reviewed.

Passeri, Daniel R.↗
NASA NTRS1994

Numerical Simulations of Light Bullets, Using the Full Vector, Time Dependent, Nonlinear Maxwell Equations

This paper will present results in computational nonlinear optics. An algorithm will be described that solves the full vector nonlinear Maxwell's equations exactly without the approximations that are currently made. Present methods solve a reduced scalar wave equation, namely the nonlinear Schrodinger equation, and neglect the optical carrier. Also, results will be shown of calculations of 2-D electromagnetic nonlinear waves computed by directly integrating in time the nonlinear vector Maxwell's equations. The results will include simulations of 'light bullet' like pulses. Here diffraction and dispersion will be counteracted by nonlinear effects. The time integration efficiently implements linear and nonlinear convolutions for the electric polarization, and can take into account such quantum effects as Kerr and Raman interactions. The present approach is robust and should permit modeling 2-D and 3-D optical soliton propagation, scattering, and switching directly from the full-vector Maxwell's equations.

Goorjian, Peter M.↗