Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon monoxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Photoinduced electronic excitations drive polymerization of carbon monoxide: A first-principles study

Under pressure, carbon monoxide (CO) transforms into a polymer that can be recovered to ambient conditions. While this transformation can occur without additional stimuli, experimental observations have shown that laser irradiation can induce a similar transformation at reduced pressure. The resulting polymeric phase, which is metastable under ambient conditions, releases energy through decomposition into more stable configurations. Using time-dependent density functional theory and Born–Oppenheimer molecular dynamics simulations, we investigate the mechanism by which electronic excitation facilitates CO polymerization. Our calculations reveal that electronic excitation enhances carbon–carbon bonding, enabling polymerization at pressures significantly lower than those required by conventional compression methods. In conclusion, these findings suggest that a photo-assisted approach could be employed to synthesize novel, potentially energetic materials under less demanding pressure conditions.

Born-Oppenheimer molecular dynamics↗
DOE OSTI2025

In Situ Atmospheric Plume Thermometry via Carbon Monoxide Spectral Profile: Laboratory and Field Validation

For small molecules with large rotational constants, knowing the relative intensities of the ro-vibrational transitions can be used to determine the temperature within a gas plume. We demonstrate the use of carbon monoxide (CO) as an in situ spectroscopic probe of gas plume temperature by application of both laboratory and standoff Fourier transform infrared spectroscopy to monitor the CO spectral response at different temperatures. Here, the measured CO rotational contours were analyzed using a simple Boltzmann model to deduce the population distribution of the J-levels, from which the in-plume temperature is deduced. The method was vetted by comparing deduced temperatures in both static laboratory measurements of known temperatures, as well as field measurements using a simulated smokestack release. For the smokestack experiments, spectroscopically deduced temperatures were compared to readings from a series of thermocouples placed at strategically sampled distances along the plume trajectory. Both the spectroscopically-derived and thermocouple-measured temperatures revealed an expansion-induced (mixing) rapid cooling of the plume, with the infrared thermometry values displaying greater temperature values which are believed to better represent the actual plume temperatures.

Analysis of rotational structure↗
DOE OSTI2026

Carbon monoxide oxidation expands the known metabolic capacity in anaerobic methanotrophic consortia

Consortia of anaerobic methane-oxidizing archaea (ANME-2) and sulphate-reducing bacteria (SRB) represent globally relevant syntrophic associations capable of growing with minimal amounts of free energy and can persist when methane becomes limiting. Carbon monoxide (CO) has been reported in seep environments and represents a thermodynamically favourable alternative electron donor due to its low reduction potential. Here, we show that environmental ANME-SRB consortia can oxidize CO in the absence of methane, in anoxic microcosm experiments using a combination of stable isotope geochemical tracers, metatranscriptomics, and single cell activity measurements (FISH–nanoSIMS). The oxidation of CO was coupled with sulphate-reduction by syntrophic consortia, and, in the absence of sulphate, through CO 2 reduction to methane by ANME-2. Under these conditions, the production of methane was one ninth the rate of methanotrophy coupled to sulphate-reduction. Paired single cell FISH-nanoSIMS analysis of anabolic activity indicates that CO respiration appears to support cell maintenance rather than active growth, consistent with the observed down-regulation of energy generating complexes in ANME (e.g., mtr, rnf, etc.). The versatile capability of CO oxidation by anaerobic methanotrophic consortia broadens our understanding of carbon cycling in methane seeps and highlights potential mechanisms of resilience by methanotrophic archaea under changing geochemical regimes.

03 NATURAL GAS↗
DOE OSTI2025

Carbon monoxide chemistry of α-V70I Mo-nitrogenase: Evidence from EPR- and IR-monitored photolysis – or, what a difference a methyl makes

A critical step in the global nitrogen cycle is the conversion of dinitrogen into biologically accessible ammonia. In Nature this is accomplished by the nitrogenase (N 2 ase) family of enzymes. Carbon monoxide (CO) has long been known as an inhibitor of dinitrogen reduction by N 2 ase, but it can also be a substrate of the enzyme, when it is catalytically reduced to hydrocarbons. Understanding the CO interactions with N 2 ases are thus relevant to both dinitrogen fixation and Fischer-Tropsch-like chemistry. Here, in this work, the interaction of CO with the α-V70I variant of Azotobacter vinelandii MoFe N 2 ase was investigated using electron paramagnetic resonance (EPR) and infrared (IR) monitored photolysis of bound CO under cryogenic conditions. This was supplemented by further analysis of stopped-flow Fourier transform IR (SF-FT-IR) data under turnover conditions. The α-V70I variant adds a single methyl group close to the FeMo-cofactor active site, and the results show that this inhibits and slows, but does not substantially chemically change, the binding of CO to the FeMocofactor. The EPR spectra of both the hi-CO and lo-CO states closely resemble those from the wild-type enzyme. Similarly, the SF-FT-IR spectra of CO inhibited α-V70I and wild-type enzyme are strikingly similar, showing only small shifts in band energies which allow better interpretation of the published wild-type spectra. The extra carbon does, however, impact and inhibit the photochemical release and migration of CO at cryogenic temperatures, resulting in novel CO-bound species. These include a product species, termed Lo-1*, which may involve CO photochemically migrating on the FeMo-cofactor.

Carbon monoxide↗
DOE OSTI2025

Water Clustering Modulates Activity and Enables Hydrogenated Product Formation during Carbon Monoxide Electroreduction in Aprotic Media

Water solvation plays a critical role in a wide range of electrochemical transformations, but its role is often convoluted since water is typically used as both a solvent and a proton source. Here, we experimentally control water speciation and activity using aprotic solvent media during the carbon monoxide reduction reaction (CORR). Remarkably, we show that aprotic solvents that support microheterogeneous water–water clusters lead to significant amounts of CORR products (methane and ethylene) with a maximum ethylene Faradaic efficiency of 22% in acetonitrile (χ H 2 O = 0.2). In contrast, microhomogeneous systems–where water integrates into the solvents’ intermolecular binding network and has lower activity–primarily support the undesired hydrogen evolution reaction (HER). As a result, insights gained expand our understanding of water activity and nonaqueous electrolyte design for other important transformation reactions beyond CO reduction, such as CO2RR and HER.

Electrolytes↗
DOE OSTI2024

Catalytic Reduction of Carbon Monoxide to Liquid Fuels with Recyclable Hydride Donors

Solar light absorption and catalysis are physically separated processes in natural photosynthesis. Natural cofactors, such as nicotinamide adenine dinucleotides (NADH), transport electrons and hydrogen to regulate and activate enzymes at remote locations. The physical separation of light absorption from catalysis provides some inspiration for artificial photosynthesis. One rather extreme implementation is to use copper wires to transport carriers from photovoltaic cells to dark electrodes, where catalysis occurs. Indeed, with a futuristic electrical grid powered solely by photovoltaics, solar capture could be separated from catalysis by hundreds of miles. An alternative approach, that bares more similarity to natural photosynthesis, employs mobile NADH/NAD + -like species that shuttle between the light absorber and a proximate, yet unilluminated, location where catalysis occurs. Additionally, such a remote approach to solar photocatalysis was recently proposed for the reduction of carbon oxides, CO 2 and CO, to methanol by cascade catalysis. This developing artificial photosynthetic approach offers the promise of catalytic generation of methanol and oxygen gas with sunlight as the sole energy source and CO 2 and water as the only chemical feedstocks. This Viewpoint evaluates the strengths and weaknesses of this approach with an emphasis on CO reduction catalysis with photorecyclable hydride donors while looking forward to what might reasonably be achieved with continued research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO 2 -based supports through H 2 reduction pretreatment. The Pt catalysts supported by defective CeO 2 -based supports, including CeO 2 , CeZrO x , and CeO 2 /Al 2 O 3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (Pt C ) with the bottom layer of Pt atoms substituting the Ce cations in the CeO 2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O 2 activation at Pt C –CeO 2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Upgrading carbon monoxide to bioplastics via integrated electrochemical reduction and biosynthesis

It is challenging to obtain high-value hydrocarbons that are longer than C 3 via electrochemical CO 2 /CO reduction. Integrating electrochemical CO 2 /CO electrolysers with a downstream bioreactor is one solution for obtaining high-value long-chain products, but the electrolytes in these two systems are mismatched, preventing smooth integration. Furthermore we demonstrate a porous solid electrolyte reactor that produces highly selective and electrolyte-free acetate and couple it with a biosynthesis system for generating C 4+ polyhydroxybutyrate bioplastic. A finely tuned electrolyte containing biocompatible salt medium with acetate can be directly injected into the downstream bioreactor without any separation or salt-mixing processes. In the optimized coupled platform, Ralstonia eutropha bacteria can grow with acetate generated from the CO electrocatalytic reduction reactor, and produce bioplastic as the final value-added product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non-thermal atmospheric pressure plasma–liquid synthesis of organic acids in aqueous solution from carbon monoxide

This work aims at understanding the conversion of CO to organic acids, namely oxalic acid and formic acid, using non-thermal atmospheric pressure plasma over aqueous solutions. CO exhibited significantly higher conversion to organic acids (more than 15×) compared to CO 2 under the same reaction conditions. The result bolsters a proposed two-step process for CO 2 fixation, whereby CO 2 is first converted to CO, and then CO is converted to organic acids. The organic acids produced from CO are intermediates in the water–gas shift (WGS) reaction of CO in the presence of an aqueous solution to dissolved CO 2 and hydrogen gas. Based on a simple thermodynamic analysis, the organic acid yield was increased by lowering the plasma–liquid reaction temperature using an ice bath to cool the reaction flask. The composition of the organic acids could be varied by changing the pH of the solution. Oxalate was formed in higher concentrations with increasing solution pH above the pK a of the radical species (CO 2 )˙ − . Below the pK a value, formate was the exclusive organic acid formed. The production of formate has a rather weak pH dependence but is enhanced slightly at a basic pH above 10. Furthermore, at basic pH, the effect of electrolyte concentration comes into play. Higher electrolyte concentrations, leading to shorter electrolyte Debye lengths, resulted in lowered organic acid yields. The highest yields of organic acids obtained in our system were 122 mg L −1 for oxalate and 77 mg L −1 for formate at an optimum 1 mM NaOH concentration in the starting solution. This work is a successful pioneering example of CO to organic acids conversion using non-thermal plasmas, which opens the pathway for a promising two-step conversion process of CO 2 to organic acids.

Sudagar, Alcina Johnson [Washington University in ↗
DOE OSTI2024

EPCAPE-PT-LANL Measurements: Gas Monitors

Coastal cities offer a unique environment for studying aerosol-cloud interactions and the effects of urban emissions on cloud properties. As part of the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE), the Partitioning Thrust by Los Alamos National Laboratory (EPCAPE-PT-LANL) was conducted. Our campaign focused on measuring the optical and chemical properties of aerosols and their interactions within marine stratocumulus clouds in La Jolla, California. EPCAPE-PT-LANL enhances the primary goals of EPCAPE through innovative observations of vapor-phase transitions between aerosols and cloud droplets, the impact of black carbon on aerosol-cloud dynamics, and the effects of cloud processing on aerosol optical properties. Instrument: G2401 Gas Concentration Analyzer (Picarro) Data Notes: The Picarro G2401 gas concentration analyzer provides simultaneous, precise measurement of carbon monoxide (CO), carbon dioxide (CO2), methane (CH4) at parts-per-billion (ppb), and water (H2O) vapor at parts per-million (ppm) sensitivity with negligible drift for atmospheric science, air quality, and emissions quantification. Header: - CO[ppm]: Concentration of carbon monoxide (CO) measured at the time of sampling, expressed in parts per million (ppm). - CO2[ppm]: Concentration of carbon dioxide (CO2) measured at the time of sampling, expressed in parts per million (ppm). - CH4[ppm]: Concentration of methane (CH4) measured at the time of sampling, expressed in parts per million (ppm). - H2O[%]: Water vapor content in the air at the time of the measurement, expressed as a percentage

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A formaldehyde and nitrogen dioxide toxics monitor for environmental justice

DOE’s Integrated Field Laboratories (IFLs) require a vast array of measurements to measure urban air quality. Nitrogen dioxide (NO2) and formaldehyde (HCHO) are ubiquitous pollutants with numerous sources, most notably vehicle exhaust. High-spatial density measurements are critical to understanding how certain neighborhoods are more adversely impacted by pollutants. This report describes the results of a Phase I SBIR project to develop and demonstrate a rapid, affordable, low-power monitor to provide high spatial resolution mobile measurements of formaldehyde and nitrogen dioxide at street-level, where people live and walk. The spatial density will be achieved via rapid measurements on a mobile platform. This sensor will quantify spatial disparities in cities of the toxics, HCHO and NO2, as well as carbon monoxide and carbon dioxide for better source identification. These species are detected in the mid infrared by laser absorption spectroscopy, and fiberoptics are used. Tasks accomplished include identification and testing of the appropriate spectroscopic regions; coupling of laser light into a fiberoptic system; development of software to control miniature electronics to scan and control two lasers simultaneously; coupling of the mid infrared fiber into a multipass cell for enhanced pathlength and sensitivity; characterization of sources of instrument noise; and design work for a Phase II prototype.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bringing Inorganic Carbon to Life: Developing Model Metalloenzymes for C1 Conversion Reactions

The global carbon cycle is carefully balanced through the use of specialized enzymes in plants, algae, bacteria, and archaea. A primordial metabolic pathway for the conversion of inorganic carbon into cellular biomass uses a large, nickel-containing enzyme called carbon monoxide dehydrogenase (CODH)/acetyl coenzyme A synthase (ACS). This system fixes carbon dioxide (CO 2 ) into carbon monoxide (CO) at the CODH site. The carbon monoxide is then used to generate acetyl coenzyme A, a biological building block, through a key carbon-carbon bond forming step at the nickel site in ACS. Despite the significance of these processes in the context of energy conversion, the fundamental chemistry underlying these transformations has remained elusive, in part due to the complexity of the natural enzyme. To better understand the principles governing these biological processes, which represent one-carbon (C 1 ) activation reactions, this project will develop functional models of CODH and ACS based on modifications to a small metalloprotein scaffold. Comprehensive characterization of these systems using advanced spectroscopic and biophysical techniques will reveal key elements responsible for conferring high levels of activity to the model systems, with implications for gaining insight into the mechanisms of the natural enzymes. Moreover, the principles learned from this research can be used to guide design of robust catalysts for efficient conversion of CO 2 and CO into liquid fuels.

10 SYNTHETIC FUELS↗