Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon powders”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration

In this work, we report the physical and mechanical properties of ceramic composite materials fabricated by binder jet 3D printing (BJ3DP) with silicon carbide (SiC) powders, followed by phenolic resin infiltration and pyrolysis (IP) to generate carbon, and a final reactive silicon melt infiltration step. After two phenolic resin infiltration and pyrolysis cycles; porosity was less than 2%, Young's modulus was close to 300 GPa, and the flexural strength was 517.6 ± 24.8 MPa. However, diminishing returns were obtained after more than two phenolic resin infiltration and pyrolysis cycles as surface pores in carbon were closed upon the formation of SiC, resulting in reaction choking and residual-free carbon and porosity. The instantaneous coefficient of thermal expansion of the composite was found to be independent of the number of phenolic IP cycles and had values of between 4.2 and 5.0 ppm/°C between 300 and 100°C, whereas the thermal conductivity was found to have a weak dependence on the number of phenolic IP cycles. While the manufacturing procedures described here yielded highly dense, gas impermeable, siliconized SiC composites with properties comparable to those of bulk siliconized silicon carbide processed according to conventional techniques, BJ3DP enables the manufacture of objects with complex shape, unlike conventional techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Far-infrared absorption of undoped and Br-doped carbon nanofiber powder in stacked-cup cone configuration

In this study, we performed room-temperature far-infrared (40–650cm –1 ) transmission measurements on undoped and bromine-doped powder samples of carbon nanofibers in stacked-cup cone geometry. The transmission spectra show enhanced transmittance after bromine doping and all spectra were fit to a Drude-Lorentz (DL) model. A decreased metallic conductivity along with a redshift of the lowest semiconducting gap was found with doped samples. A significant decrease in the scattering rate upon heavy doping has been qualitatively explained as partial ordering of intercalated dopant ions. Absorption spectra were derived from the transmission spectra under the assumption of nondispersive reflectance and subsequently compared with DL-model-derived spectra. The free-carrier density of the n -type powder and the electronic mean free path were estimated and compared with reported values for single-walled nanotubes and pyrolytic graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electrochemical Behavior of Low Loading Slurry Electrodes for Redox Flow Batteries

The scalability of all-iron redox flow batteries is limited by the plating reaction at the negative electrode on charge. Slurry electrodes have been proposed to allow the plated metal to remain dispersed in the electrolyte and alleviate this limitation. Greater understanding is needed in how faradaic current is distributed between the slurry and the stationary electrode/current collector, especially at relatively low slurry particle loadings. In this work, experiments were conducted using three carbon powders (Kuraray YP-50F, SGL Carbon GFG20HP, and Fisher Scientific GP14736) dispersed in aqueous acidic electrolyte to investigate the effects of slurry particle size, shape, composition, and loading on the behavior of the iron (II/III) reaction. The slurries of YP-50F carbon particles were shown to significantly enhance the faradaic reaction rate due to their high specific surface area but failed to pull the majority of the faradaic current away from the stationary electrode due to the low conductivity of the percolated network. The two graphitic carbons’ slurries did not accelerate the reaction in the same way, but their higher electrical conductivity did succeed in allowing the faradaic reaction to occur primarily on the mobile slurry instead of the stationary current collector.

25 ENERGY STORAGE↗
DOE OSTI2024

High-pressure high-temperature synthesis and characterization of B 10 C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B 4 C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B 10.4 C to B 4 C). Our study explores a synthesis route for B 10 C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B 10 C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B 10 C ratio. The measured nanoindentation mean hardness of B 10 C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm –1 . This Raman band, which appears notably weaker in earlier studies and B 4 C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Continuous Production of Carbon-Supported and Surfactant-Free Pt-M (M=Fe, Co, Ni, and Cu) Nanocrystals for Catalyzing Oxygen Reduction

Scalable production of carbon-supported Pt-M (M=Co, Ni, and Fe) alloy nanocrystals is of great importance for their practical application as catalysts towards the oxygen reduction reaction (ORR), a process key to the operation of proton-exchange membrane fuel cells. Here we report the use of a fluidic device for the in situ nucleation and growth of Pt-M nanocrystals on a commercial carbon support in a continuous and scalable fashion. The use of dimethylformamide not only enables well dispersion of the carbon powders for the creation of a homogeneous reaction mixture but also helps reduce metal precursors for the heterogeneous nucleation and growth of nanocrystals on the carbon surface. The size, shape, and composition of the nanocrystals can all be tuned by changing the metal precursors added into the reaction mixture, resulting in Pt-M nanocrystals uniformly distributed across the surface of the carbon support. Among the nanocrystals, the carbon-supported Pt-Co nanocrystals show the highest ORR specific and mass activities at 0.9 V, demonstrating 11.4- and 8.8-fold enhancements over the state-of-the-art commercial Pt/C catalyst.

Electrochemistry↗
DOE OSTI2026

Ultra-Low Amounts of Transition Metals in Carbon-Based Catalysts Improve Their Alkaline OER Performance: A Systematic Study

The pursuit of green hydrogen production highlights a persistent gap in electrocatalyst research: while academic efforts prioritize cost-efficiency via activity enhancement, industrial viability demands greater emphasis on electrochemical stability. Carbon-based electrocatalysts, particularly those incorporating transition metals, have shown promise in alkaline oxygen evolution (OER) due to their high activity, cost-efficiency, and resource-efficiency. However, these catalysts suffer from insufficient stability under oxidizing conditions compared to pure transition metal catalysts due to erosion of the carbon support resulting from carbon corrosion, among other degradation mechanisms. In this systematic study, the influence of ultra-low amounts (<1 wt %) of iron, cobalt, nickel, and their most common combinations on the stability of a hydrothermally derived, N-doped carbon support and the overall catalyst performance during alkaline OER is systematically explored. By identifying critical stability descriptors and correlating them with synthesis conditions and catalyst properties, primary and secondary corrosion pathways are unraveled. Subsequently, through careful adjustment of carbonization temperature and composition of incorporated transition metals, overall catalyst corrosion can be suppressed immensely. Especially, the inclusion of Ni and Fe is paramount for the formation of stable catalyst materials under laboratory conditions (10 mA/cm 2 in 0.1 M KOH), which is surprisingly unconstrained by the degree of graphitization of the carbon support. Mixing this electrochemically stable material with a graphitic carbon powder results in an excellent stability of over 400 h at 100 mA/cm 2 in 1 M KOH, implying great potential for the future improvement of carbon-based electrodes under oxidizing conditions toward industrial application.

N-doped carbon↗
DOE OSTI2025

1,10-Phenanthroline-Iron Complex-Derived Fe-N-C Electrocatalysts: Enhanced Oxygen Reduction Activity and Stability Through Synthesis Tuning

The development of electrocatalysts composed of earth-abundant elements is essential for advancing the commercial application of Proton Exchange Membrane Fuel Cells (PEMFC). Among these, single-atom electrocatalysts, such as Fe-N-C, show great promise for the oxygen reduction reaction (ORR). This study aims to improve the ORR activity and stability of Fe-N-C electrocatalysts by fine-tuning the straightforward 1,10-phenanthroline-iron complexation synthesis method. Key parameters, including iron-to-phenanthroline ratio, carbon powder surface area, and pyrolysis temperature were systematically varied to evaluate their influence on the resulting electrocatalysts. The findings of this study revealed that the electrocatalysts synthesized with 1,10-phenanthroline (Phen) and high-surface-area Black Pearls (BP) possessed much better ORR activity than electrocatalysts prepared by using Vulcan carbon (lower surface area). Interestingly, electrocatalysts prepared with BP, but with a non-bidentate nitrogen-containing ligand molecule, such as imidazole, showed a much poorer activity, as the resulting material predominantly consisted of inactive structures, such as encapsulated iron nanoparticles and iron oxide, as evidenced by HR-TEM, EXAFS, and XRD. Therefore, the results suggest that only the synergistic combination of the bidentate ligand phenanthroline (Phen) and the high-surface-area carbon support (BP) favored the formation of ORR-active Fe-N-C single-atom species upon pyrolysis. The study also unveiled a significant enhancement in electrocatalyst stability during accelerated durability tests (and air storage) as the pyrolysis temperature was increased from 700 to 1300 °C, albeit at the expense of ORR activity, likely resulting from the generation of iron particles. Pyrolysis at 1050 °C yielded the electrocatalyst with the most favorable balance of activity and stability in rotating disk measurements, while maintaining moderate durability under PEM fuel cell operation. The insights obtained in this study may guide the development of more active efficient and durable electrocatalysts, synthesized via a simple method using earth-abundant elements, for application in PEMFC cathodes.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Thermal Processing Conditions for the Synthesis of Near Theoretical Density Li 5 La 3 Ta 2 O 12 Ceramics for Ceramic Dual-Mode Detectors

A family of Li-containing garnet compounds, extensively investigated for Li-ion solid electrolyte applications, show great potential to be developed into transparent ceramic dual-mode scintillators. In particular, Li 5 La 3 Ta 2 O 12 (LLTaO) shows promise as an efficient dual-mode scintillator due to its high Li content, high density, non-hygroscopicity, and high effective-Z. Often the synthesis of LLTaO ceramics involves solid state processing techniques starting with oxide and carbonate powders, calcining, sintering for the removal of residual porosity, and post-processing. This study focuses on two objectives: (1) establishing thermal processing boundary conditions for a flexible alkoxide-based sol-gel method for synthesizing fine-grained powders; and (2), consolidating powders via hot-pressing to form high-density ceramics. In this study, near single-phase ceramics were achieved by hot-pressing sol-gel powders with varying amounts of excess Li. Rietveld refinements were used to analyze X-ray diffraction data and provide a quantitative evaluation of the phases present in the hot pressed ceramics. Some of the diffraction data showed large low angle peak asymmetry, suggesting the presence of two cubic Li 5 La 3 Ta 2 O 12 garnet phases with different lattice parameters. Depending on the synthesis and processing conditions, the refinement revealed ~ 90 wt% concentration of a phase with a ≈ 12.8 Å and ~ 10 wt% concentration of a phase with a ≈ 12.9 Å, indicating a remaining excess of Li in the hot pressed ceramics in the large lattice parameter phase. These synthesis experiments allowed for the determination of a baseline for Li loss during hot-pressing. X-ray excited radioluminescence and photoluminescence excitation and emission spectra were obtained from the hot pressed ceramics. In conclusion, the measured emission spectra featured broad tantalate emission and line emissions likely from a rare-earth impurity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Copper carbon composite wire with a uniform carbon dispersion made by friction extrusion

Copper-carbon composites are a group of materials with excellent mechanical, electrical, thermal, and tribological properties. However, bulk size copper-carbon composites made by the traditional manufacturing processes, like rolling or extrusion, fall short of reaching some of these properties predicted by theory or demonstrated only by samples at centimeter scale or smaller. The two main challenges to the successful scaling-up are: 1) to uniformly disperse carbon in the metal matrix; 2) to avoid degradation due to oxidation or reaction from overheating. In this work, we first demonstrate friction extrusion as a new method to make bulk-size void-free copper-carbon composite wires with homogenized carbon dispersion. Three different carbon varieties, graphite powder, graphene nanopowder, and carbon nanotubes, were added to the copper matrix with the concentration ranging from 0.5 wt% to 15 wt%. Special tooling, processing parameters, and procedures were developed, especially for high carbon content samples. Ten-fold reductions of both copper grain size and carbon particle size were achieved and attributed to the high shear deformation. Energy dispersive X-ray spectrometry indicates the carbon powder was refined to a sub-micron level and uniformly dispersed in the copper matrix. Compared with that of pure copper, the thermal capacity of the composite wire increases by 30 % while density reduces by 29 %.

Friction extrusion, Metal matrix composite, Graphe↗
DOE OSTI2022

Carbon Electrodes from Powder River Basin Coal Development of Competitive Supercapacitor Electrodes of Diverse Compositions from Coal Extract

Recent demand for coal as a thermal energy source has decreased significantly and will likely continue to decrease as renewable sources of energy become more available and environmental concern and cost from burning coal makes it more costly than renewables. Given that Powder River Basin (PRB) coal in Wyoming has relatively low thermal energy, it is critical for Wyoming to employ coal in other capacities at the current energy transition period in history. Among many potential non-thermal applications, PRB coal can be utilized for membrane and electrode applications through the formation of carbon fibers. Coal-derived membranes can become low-cost, conductive membranes for use in electrodialysis separation processes. Carbon fiber derived electrodes have been shown be a cost-effective alternative to typical electrode materials that can meet or exceed the performance of current carbon electrode materials. In this talk, we demonstrate the manufacture of supercapacitor electrodes from Powder River Basin (PRB) coal-derived precursors. Specifically, PRB coal was treated in cheap solvents, partitioned into liquid extract and solid residue. An electropinning process has been developed that can convert either the liquid extract or the solid residue into carbon fiber mats. The electrospinning process is versatile with many tunable process parameters to achieve desirable physiochemical properties. For example, the coal residue can be manipulated by additional heat treatment, or by adding binders, salts, or surfactants to create a solution that can be electrospun into advanced carbon electrodes with desirable structural and surface properties. Similarly, some of the liquid extract (tar fraction) can be subsequently reacted with toluene diisocyanate to create resinous coal-derived polyurethane (PUs) as a spinnable ink. Carbon nanofiber mats made from our proprietary electrospinning process were further carbonized at temperature ranging from 700°C to 900°C before they are used as electrodes in supercapacitors. Galvanostatic charge-discharge (GCD) results show that the best performing PU fiber mats can deliver a specific capacitance of 604 F g -1 at the current density of 1 A g -1 . A carbon fiber mat from a different solvent extraction residue also delivered the specific capacitance of 508 F g -1 . These specific capacitance values are comparable to or better than commercial activated carbons, demonstrating the viability of manufacturing carbon nanofiber electrodes from coal without the use of a commercial polymer as binder in the spinning ink.

Cincotta, Robert↗
DOE OSTI2024

Sorption kinetics and stability of conventional adsorbents for mercury remediation

In-situ remediation of mercury at numerous contaminated sites worldwide is a challenging and costly endeavor due to the persistency of this contaminant. In this study, we evaluated eight commercially available sorbent media ranging from carbon-, clays- and silica-based materials (PBC– Biochar, eSorb – Sorbster, nsPAC – Powdered Activated Carbon, fsPAC – Powdered Activated Carbon with Mackinawite, F300 – Filtrasorb 300, Si-SH – Silica Thiol, eBind – RemBind, Q-Clay – Organoclay PM-199), for their effectiveness in sorbing mercury (Hg 2+ ) and mercury complexed with dissolved organic matter (Hg-DOM). Under the chosen experimental conditions of this study, results showed that in the absence of DOM, the kinetic rates of Hg 2+ sorption onto the evaluated sorbents were in the order of 0.31 min-1 (Si-SH) to 2.98 min -1 (nsPAC), whereas in the presence of DOM, the rates varied from 0.16 min-1 (F300) to 0.95 min -1 (nsPAC). The measured sorption capacity for Hg 2+ in the absence of DOM varied from 3.02 mg/g (Q-Clay) to 35.15 mg/g (Si-SH), whereas in the presence of DOM, calculated partition coefficient (KD) ranged from 69.7 mL/g (Q-Clay) to 41,510 mL/g (Si-SH). Furthermore, kinetic data suggest liquid film diffusion was the rate-limiting steps governing mercury sorption onto the studied media. Overall, the obtained study parameters (kinetics/isotherm) are particularly important in informing robust engineering designs for deployment of the vast majority of evaluated sorbents. Thus, sorbent-based strategies offer viable solutions for cost-effective cleanup of mercury at industrially contaminated sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Orthorhombic cerium(III) carbonate hydroxide studied by synchrotron powder X-ray diffraction

Cerium(III) carbonate is a precursor material for the synthesis of various Ce-containing compounds. In this work, a synchrotron powder X-ray diffraction study of commercially obtained ‘cerium(III) carbonate hydrate' indicates that multiple Ce-containing phases are present. The majority phase CeCO 3 OH (52.49% wt ) was refined using an orthorhombic Pmcn structure model with a = 5.01019 (2) Å, b = 8.55011 (4) Å and c = 7.31940 (4) Å, which is based on a reported structure for the lanthanoid carbonate mineral ancylite. Additionally, a substantial portion of the precursor material is cubic cerium(IV) oxide (47.12% wt ).

08 HYDROGEN↗
DOE OSTI2025

Stirring and peristaltic pumping alter flow electrode particle size and morphology

Flowable carbon-based electrodes are widely studied in electrochemical systems for energy storage and water treatment. Most laboratory- and pilot-scale studies employ active mixing for slurry preparation and handling and use peristaltic pumps for slurry circulation. Magnetic stirring is the most prevalent mixing method at the laboratory scale, and the combination of magnetic mixing and peristaltic pumping is favored for convenience and compatibility with particulate suspensions. However, these methods can strongly affect particle size and morphology (and therefore cell performance). In this study, we evaluate how mixing and pumping influence particle degradation in two commonly used carbon materials: spherical carbon black (CB) beads and powdered activated carbon (AC). We performed 24 h stirring-only experiments using magnetic, orbital, and overhead stirring. Separately, we conducted 32 h circulation experiments using a commercial peristaltic pump. Particle morphology and size were analyzed using optical microscopy and laser diffraction. The initially spherical CB beads (~580 μm, 1.5 wt%) exhibit rapid and extensive breakdown under both peristaltic pumping and magnetic stirring. By comparison, AC particles (initially ~31 μm) tested at 1.5 and 15 wt% showed measurable size reductions of up to ~25 % under either stirring or pumping. In conclusion, these findings highlight the need to account for and quantify morphological changes caused by both stirring and pumping in the design and associated evaluation of flowable electrode systems.

Chemistry↗
DOE OSTI2024

A comprehensive study on two types of supercapacitor composite electrodes comprising MnO 2 and activated carbon nanofibers: Self-supporting membrane and ground powder

Manganese dioxide (MnO 2 )@carbon composites have been attractively considered as electrode materials for supercapacitors (SCs) due to synergistic effects. This work systematically investigated the structure of MnO 2 @carbon nanofiber (CNF) composite electrodes with the different forms of CNFs and the corresponding electrochemical performance of SCs. In brief, novel activated carbon nanofibers were first fabricated by electrospinning the hydroxyl-containing poly(amic acid) solution, and then the preferred CNF material was decorated by MnO 2 crystals in the form of self-supporting membrane and ground powders, respectively. Additionally, the synthesis parameters were investigated and optimized based on the electrochemical performance of SCs. The results reveal that the powdered composite electrode exhibits a higher specific surface area of 501 m 2 g –1 compared to the self-supporting membrane composite electrode under the same conditions, resulting in a promising specific capacity of 214.1 mAh g –1 (770.8 Fg –1 ) in 6M KOH solution at 0.5 A g –1 . In addition, the capacitance of the symmetrical SC device assembled by G-HMC-1:3–80 reaches 179.8 Fg –1 , coupled with an energy density of 24.86 Whkg –1 at 230 Wkg –1 power density. This work provides valuable hints for designing SC composite electrode materials with outstanding performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Fabrication of Advanced Nanocarbon-Metal Composites for Improved Energy Efficiency

We fabricated nanocarbon metal composites (NCMC) of Al alloys with a process called “electrocharging assisted process” (EAP). This method consists of the application of a high current to a mixture of liquid metal and carbon particles. We investigated aluminum alloys (6061 and 1350) and used activated carbon and graphite powder as the source of carbon. The high current induces the formation of carbon chains and ribbons in the liquid metal. Upon solidification of the metal an epitaxial relation between the carbon nanostructures and the metal lattice is produced. The purpose of the project was to find the parameters during the reaction that would give rise to a high density of nanoribbons extending throughout the metal such that the electrical conductivity and the mechanical strength of the composite increased and that the method could be extended to large scale manufacturing. For this purpose, we designed two reactors for the incorporation of nanocarbon ribbons in aluminum metal. The first reactor was designed to have more control of the region with the high current density. However, there were problems with getting good mixing of the carbon in small volumes. A second reactor was designed with a stirrer that allowed for better mixing of the carbon by the introduction of argon gas through the shaft of the stirrer. NCMC were fabricated with a series of parameters to understand the role of current, time of applied current, type and shape of the cathode electrode and stirring speed of the mixture. We analyzed the composites by Raman scattering to gain information on the crystallite size of the nanocarbon, XRD to obtain the crystal structure of the composite, SEM and TEM to characterize the grain size of the aluminum grains and the quality of the crystal structure. We also measured the electrical conductivity and mechanical properties of selected samples. The nanocomposites showed increase in crystallite size of the nanocarbon with a linear dependence of the crystallite size on the duration of the applied current. There is a minimum current density necessary for the crystallite size to increase compared to the ~ 10 nm size of the activated carbon source used in the fabrication. The electrical conductivity of the nanocomposites increased with crystallite size of the nanocarbon and with the concentration of converted carbon. The maximum increase in electrical conductivity was 5.7% above the baseline for samples with ~ 4 wt % nanocarbon with crystallite size larger than 30 nm. These samples presented a hardness ~ 8% higher than the baseline samples with no carbon.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Development of Nanocrystalline Graphite from Lignin Sources

Carbon composites are attractive to a variety of high-impact applications, such as carbon fibers, batteries, and vehicle parts, due to their multifunctional properties. The properties of carbon are highly dependent on the allotrope the carbon takes and the functionality, impurities, and defects contained within the structure. The increase in demand for sustainable carbon sources in energy storage devices motivates interest in understanding synthesis parameters of lignin value-added products. Also, as the dependence on oil for fuel decreases, alternative sources for carbon in many applications will be needed. In this work, the thermochemical conversion of lignin powders from different feedstocks was evaluated via small and wide-angle X-ray scattering techniques to resolve the amorphous, disordered, and crystalline domains present in the lignin carbons. Scattering analyses indicated an evolution of hierarchical structures along with an increase in ordered domains as a function of carbonization temperature. Qualitative and quantitative methods were used to describe isotropic scattering intensity profiles at multiple length scales. The use of power law models in the mesoscopic region served as the basis to describe morphological changes related to structural features, for example, graphene stacking, degree of roughness, and surface fractals. Kraft softwood and switchgrass produced carbon powder with the most crystalline domains and the least surface roughness. Softwoods reached the highest degree of crystallinity followed by switchgrass samples and had less variability in particle sizes. These results suggest lignin carbons extracted from softwoods and switchgrass are viable substitutes for graphite. Interpretation of X-ray scattering data from lignin carbon powders elucidates feedstock- and processing-dependent morphological features across multiple length scales providing a straightforward framework to evaluate the feasibility of leveraging lignin carbons for producing tunable application-specific materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗