Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon-negative hydrogen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Summary Report of the Carbon-Negative Hydrogen Workshop

This report summarizes the outcomes of the Carbon-Negative Hydrogen Workshop held at the National Renewable Energy Laboratory in Golden, Colorado on June 22-23, 2023. The workshop was co-sponsored by Lawrence Livermore National Laboratory and the National Energy Technology Laboratory and focused on developing a shared understanding of the importance of and opportunities for generation and use of carbon-negative hydrogen in industrial decarbonization. For the purposes of this workshop, carbon-negative hydrogen was defined as hydrogen (H 2 ) produced in a manner that leads to net carbon dioxide removal from the atmosphere thus giving rise to a life cycle cradle-to-grave carbon intensity that is below zero.

08 HYDROGEN↗
DOE OSTI2024

Data for Carbon-negative Hydrogen: Aqueous Phase Reforming (APR) of Glycerol over NiPt Bimetallic Catalyst Coupled with CO2 Sequestration

Herein we report the production of high-pressure (19.3 bar), carbon-negative hydrogen (H2) from glycerol with a purity of 98.2 mol% H2, 1.8 mol% light hydrocarbons (mainly methane), and 400 ppm of CO. Aqueous phase reforming (APR) of 10 wt% glycerol solution was studied with a series of NiPt alumina bimetallic catalysts supported on alumina. The Ni8Pt1-450 catalyst had the highest hydrogen selectivity (95.6%) and the lowest alkanes selectivity (3.7%) of the tested catalysts. The hydrogen selectivity decreased in the order of Ni8Pt1-450 > Ni8Pt1-260 > Ni1Pt1-260 > Pt-260. The CO2 was sequestered with CaO adsorbent which formed CaCO3. We measured the adsorption capacity of the CaO adsorbent at different temperatures. Life cycle analysis showed that the APR of glycerol coupled with CO2 capture has net negative CO2 equivalent greenhouse gas emissions. The CO2 emissions are −9.9 kg CO2 eq./kg H2 and −50.1 kg CO2 eq./kg H2 when grid electricity and renewable electricity are used, respectively, and the CO2 is allocated respectively to the mass of products produced. The cost of this H2 (denoted as “green-emerald”) was estimated to be 2.4 USD per kg H2 when grid electricity is used and 2.7 USD per kg H2 when using renewable electricity. The cost of glycerol has the highest contribution of 1.71 USD per kg H2. Participation in the carbon credit markets can further decrease the price of the produced H2.

Catalysis↗
DOE OSTI2024

Carbon-negative hydrogen: aqueous phase reforming (APR) of glycerol over NiPt bimetallic catalyst coupled with CO 2 sequestration

Herein we report the production of high-pressure (19.3 bar), carbon-negative hydrogen (H 2 ) from glycerol with a purity of 98.2 mol% H 2 , 1.8 mol% light hydrocarbons (mainly methane), and 400 ppm of CO. Aqueous phase reforming (APR) of 10 wt% glycerol solution was studied with a series of NiPt alumina bimetallic catalysts supported on alumina. The Ni 8 Pt 1 -450 catalyst had the highest hydrogen selectivity (95.6%) and the lowest alkanes selectivity (3.7%) of the tested catalysts. The hydrogen selectivity decreased in the order of Ni 8 Pt 1 -450 > Ni 8 Pt 1 -260 > Ni 1 Pt 1 -260 > Pt-260. The CO 2 was sequestered with CaO adsorbent which formed CaCO 3 . We measured the adsorption capacity of the CaO adsorbent at different temperatures. Life cycle analysis showed that the APR of glycerol coupled with CO 2 capture has net negative CO 2 equivalent greenhouse gas emissions. The CO 2 emissions are –9.9 kg CO 2 eq./kg H 2 and –50.1 kg CO 2 eq./kg H 2 when grid electricity and renewable electricity are used, respectively, and the CO 2 is allocated respectively to the mass of products produced. The cost of this H 2 (denoted as “green-emerald”) was estimated to be 2.4 USD per kg H 2 when grid electricity is used and 2.7 USD per kg H 2 when using renewable electricity. The cost of glycerol has the highest contribution of 1.71 USD per kg H 2 . As a result, participation in the carbon credit markets can further decrease the price of the produced H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Pathways for Negative-Emissions Hydrogen: Opportunities and R&D Needs

The Carbon-Negative Hydrogen Workshop, hosted by NREL in Golden, Colorado, focused on developing a shared understanding of the importance of and opportunities for generation and use of carbon-negative H2 in industrial decarbonization. Attendees helped define research needs, spot barriers to commercialization, and identify technical challenges, opportunities, and knowledge gaps for this emerging technology area. Workshop discussion themes included energy justice in early-stage research, R&D pathways for negative-emissions H2, biomass gasification to carbon-negative H2, and policy and carbon accounting considerations.

biomass↗
DOE OSTI2023

Energy Justice in Low-TRL Research

The Carbon-Negative Hydrogen Workshop, hosted by NREL in Golden, Colorado, focused on developing a shared understanding of the importance of and opportunities for generation and use of carbon-negative H2 in industrial decarbonization. Attendees helped define research needs, spot barriers to commercialization, and identify technical challenges, opportunities, and knowledge gaps for this emerging technology area. Workshop discussion themes included energy justice in early-stage research, R&D pathways for negative-emissions H2, biomass gasification to carbon-negative H2, and policy and carbon accounting considerations.

carbon-negative hydrogen↗
DOE OSTI2024

Integration of genome-scale metabolic model with biorefinery process model reveals market-competitive carbon-negative sustainable aviation fuel utilizing microbial cell mass lipids and biogenic CO 2

Producing scalable, economically viable, low-carbon biofuels or biochemicals hinges on more efficient bioconversion processes. While microbial conversion can offer robust solutions, the native microbial growth process often redirects a large fraction of carbon to CO 2 and cell mass. By integrating genome-scale metabolic models with techno-economic and life cycle assessment models, this study analyzes the effects of converting cell mass lipids to hydrocarbon fuels, and CO 2 to methanol on the facility’s costs and life-cycle carbon footprint. Results show that upgrading microbial lipids or both microbial lipids and CO 2 using renewable hydrogen produces carbon-negative bisabolene. Additionally, on-site electrolytic hydrogen production offers a supply of pure oxygen to use in place of air for bioconversion and fuel combustion in the boiler. To reach cost parity with conventional jet fuel, renewable hydrogen needs to be produced at less than $\$2.2$ to $\$3.1$/kg, with a bisabolene yield of 80% of the theoretical yield, along with cell mass and CO 2 yields of 22 wt% and 54 wt%, respectively. The economic combination of cell mass, CO 2 , and bisabolene yields demonstrated in this study provides practical insights for prioritizing research, selecting suitable hosts, and determining necessary engineered production levels.

09 BIOMASS FUELS↗
DOE OSTI2022

Hydrogen Production and Hydrogen Shot: Options for Producing Low-Carbon Hydrogen at Scale

Comprehensive, concerted efforts supported by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Hydrogen and Fuel Cell Technologies Office (HFTO) are advancing research and development to demonstrate water splitting pathways to large-scale, low-cost hydrogen from diverse domestic resources. These pathways enable an economically competitive and environmentally beneficial future energy system across sectors and can address specific applications that are difficult to decarbonize.

advanced water-splitting technologies↗
DOE OSTI2026

Final Report: Process Intensification of Hydrogen Production through Sorption-Enhanced Gasification of Biomass

The University of Utah, in partnership with Idaho National Laboratory (INL), evaluated Sorption-Enhanced Gasification (SEG) as a transformative pathway for producing hydrogen with the potential for negative CO 2 emissions. SEG integrates gasification, water-gas shift, and in-situ carbon capture within a dual fluidized bed reactor to enable efficient clean hydrogen production. Key challenges related to biomass variability and process complexity were addressed through feedstock engineering, reaction optimization, and process validation. A co-pelletized biomass–limestone feedstock was developed to simplify feeding and introduction of makeup limestone. Kinetic and sorbent studies identified optimal operating conditions and confirmed the suitability of low-cost limestone, while catalysts were developed to reduce tar formation. Reactor modeling and techno-economic analysis indicated that SEG can achieve competitive hydrogen production costs, particularly when combined with carbon incentives, supporting its potential for scale-up and carbon-negative operation.

08 HYDROGEN↗
DOE OSTI2024

Wabash Hydrogen Negative Emissions Technology Demonstration

The objectives of the Wabash Hydrogen Negative Emissions Technology Demonstration Project (Wabash Project) are to develop and design all aspects of the scope, cost, characteristics and investment case of a world class flexible gasification, net negative carbon, hydrogen co-products power plant. The outcome of this undertaking is a complete set of deliverables that has been produced by a preeminent team of engineers, constructors, operators, and developers, building upon previous technology, utilizing cutting edge technology, and thoroughly defining all aspects of this fully integrated 21st Century Powerplant. The Wabash Project encapsulates several cross-cutting initiatives within the US Department of Energy, such as 100% hydrogen powered combustion turbine, geological carbon sequestration, coal with biomass gasification and hydrogen energy storage. The flexible gasifier at the Wabash Valley Resources plant is a slurry-fed, entrained flow, high-temperature, oxygen-blown gasifier that has been proven commercially to operate successfully on various coals and petroleum coke (petcoke). The ability to be fuel flexible and feed various biomass (woody biomass and agriculture residue) and petroleum waste (plastics) was evaluated during BP 1 (BP1). This involved the preparation and testing of feedstocks into slurries to determine what fuels can be fed to the gasifier. By utilizing a flexible oxygen-blown gasifier, the ability to address operational issues common to lower temperature biomass gasification, such as the handling of tars, can be mitigated. The overall goal is to achieve a design capable of carbon-negative emissions while leveraging the substantial investments made and operating experience already gained at the Wabash site.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Simulation and Optimization of Volatile Fatty Acid Upgrading Strategies for Sustainable Transportation Fuel Production

Underutilized wet waste is a promising feedstock for production of carbon-neutral or carbon-negative liquid transportation fuels. Arrested methanogenesis of wet wastes by microbes, which produces mixtures of C2-C8 carboxylic acids (volatile fatty acids, VFAs), is practiced industrially at a pilot scale and the VFA products can be catalytically upgraded to molecules suitable for use as transportation fuels (alcohols and alkanes) via sequential ketonization and hydrogenation, both steps of which have been demonstrated with high (>90%) yield at the lab scale. We present in this work a simulation-based decision-making framework which evaluates upgrading strategies of VFAs to alcohol- and hydrocarbon-based neat and blended diesel, jet, and gasoline fuels. The processes utilize sequential upgrading steps (ketonization and hydrogenation) accompanied by one distillation step (either separating VFAs before ketonization or alcohols after ketone hydrogenation) to form two liquid streams: a light alcohol stream best suited as a light-duty fuel and a heavy alcohol or hydrocarbon stream best suited as a diesel or jet fuel. Suitability of the liquid products as transportation fuels and maximum blending levels with petrofuels comes from simulation of critical fuel properties (boiling point, flash point, lower heating value, viscosity, melting point, water solubility, and cetane/octane number). Catalytic upgrading steps and fuel property mixing models used by the simulation are experimentally validated. We demonstrate the flexibility of the decision-making algorithm by evaluating processing scenarios for experimentally-observed VFA profiles with varied carbon chain length distributions. Processing scenarios are optimized for either maximum total renewable carbon utilization or production of heavy-duty (jet or diesel) fuels. We evaluate the economic viability and CO2 emissions of each proposed upgrading scenario using techno-economic and life cycle analyses. The decision-making framework developed in this work can also be used to down-select promising strategies for upgrading of other bio-based feedstocks to sustainable fuels and chemicals.

aviation fuel↗
DOE OSTI2022

Charting C–C coupling pathways in electrochemical CO 2 reduction on Cu(111) using embedded correlated wavefunction theory

The electrochemical CO 2 reduction reaction (CO 2 RR) powered by excess zero-carbon-emission electricity to produce especially multicarbon (C 2+ ) products could contribute to a carbon-neutral to carbon-negative economy. Foundational to the rational design of efficient, selective CO 2 RR electrocatalysts is mechanistic analysis of the best metal catalyst thus far identified, namely, copper (Cu), via quantum mechanical computations to complement experiments. Here, we apply embedded correlated wavefunction (ECW) theory, which regionally corrects the electron exchange-correlation error in density functional theory (DFT) approximations, to examine multiple C–C coupling steps involving adsorbed CO (*CO) and its hydrogenated derivatives on the most ubiquitous facet, Cu(111). We predict that two adsorbed hydrogenated CO species, either *COH or *CHO, are necessary precursors for C–C bond formation. The three kinetically feasible pathways involving these species yield all three possible products: *COH–CHO, *COH–*COH, and *OCH–*OCH. The most kinetically favorable path forms *COH–CHO. In contrast, standard DFT approximations arrive at qualitatively different conclusions, namely, that only *CO and *COH will prevail on the surface and their C–C coupling paths produce only *COH–*COH and *CO–*CO, with a preference for the first product. This work demonstrates the importance of applying qualitatively and quantitatively accurate quantum mechanical method to simulate electrochemistry in order ultimately to shed light on ways to enhance selectivity toward C 2+ product formation via CO 2 RR electrocatalysts.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Capabilities Development at the University of Texas at El Paso for Hydrogen Generation Research and Education

Gasification-based systems have recently received much attention due to their capability of converting wastes into useful fuels. The gasification of biomass, municipal solid waste (MSW), plastics, and other sustainable resources has shown promise in hydrogen production. When coupled to a CCU or CCS unit, these systems have the potential to achieve carbon neutrality or carbon-negative emissions. In addition, these systems have an edge over conventional incineration or landfill systems by reducing greenhouse gas emissions and recovering useful energy. However, the gasification of MSW and other wastes is still in its early stages. In particular, co-gasification of wastes with biomass has significant unknowns in optimizing the reaction kinetics, operability, design and performance improvements. Currently, Supercritical Water Gasifiers (SCWG) and Plasma Gasifiers are the major systems that are capable of producing high hydrogen amounts from Biomass and MSW, respectively. However, both systems have high capital and operating costs, adversely affecting efficiency and the hydrogen production cost. Additionally, due to lower temperatures, SCWGs are prone to tar formation and fouling in the heat exchangers. Hence, there is a need to look for alternative solutions for MSW and biomass gasifications, particularly in co-gasification. The current effort aims to develop a strategic plan to establish a sustainable gasification facility for hydrogen research at the University of Texas at El (UTEP). A major part of this effort involves an extensive literature survey to identify technological gaps and potential areas of interest. Several concepts were developed in accordance with the current demands from the literature survey. Based on the concepts, a center-wide capability assessment was conducted to measure the current capacity and feasibility of establishing hydrogen research. Afterward, a strategic research plan was developed, and a list of required resources was made for the expansion of hydrogen research at UTEP. In addition, successful partnerships with the local county and the city were developed to pursue hydrogen research. The strategic goal setting and planning of UTEP Aerospace Center resulted in securing $2.5 million in external support to expand the hydrogen research during the project performance period. In addition, during the project period, a course in Hydrogen Energy Systems was developed to expand the energy curriculum at the UTEP Aerospace and Mechanical Engineering Department. The course focused on hydrogen production, storage, supply and delivery and application. The cross-listed course was offered at both undergraduate and graduate levels during the Spring 2024 semester and had 27 enrolled students. Moreover, the students supported under this award were trained in gasification process modeling, CAD, CFD and FEA during the project period. The training enabled the students to move into new projects to support gasification design, integrated gasification combined cycle process plant analysis, gasifier structural and operational analysis, and digitally threading the systems.

08 HYDROGEN↗
DOE OSTI2024

Scalable electrified cementitious materials production and recycling

The production of Portland cement, the industry-standard cement, contributes ~8% of global CO 2 emissions through fossil-fuel heating and decomposition of limestone (the primary cement raw material). Decarbonization, e.g., via direct electrification, of this 200-year-old liming routine is extremely challenging at the industry scale. We propose a scalable electrochemical decarbonization approach to circumvent the limestone use by switching to carbon-free calcium silicates from abundant minerals and recycled concrete. Water electrolysis produces protons and hydroxides to drive a pH gradient that accelerates Ca 2+ ion leaching from calcium silicates and captures atmospheric CO 2 to form carbon-negative CaCO 3 , which serves as the feedstock for cement manufacturing or as the carbon-mineralized product for cement substitution with permanent carbon storage. Value-added co-products amorphous silica and green H 2 further enhance cement performance and supplant fossil fuels for net-zero transition, respectively. The products readily meet present-day regulatory standards and demands, and the approach readily synergizes with business-as-usual cement manufacturing and concrete construction, which are important for upscaling and structural safety, promising ready reception by the public and industries. Blended Portland cement produced through our approach with carbon-negative CaCO 3 and silica demonstrates enhanced resilience and achieves carbon neutrality or negativity when incorporating storage or circulation of CO 2 from cement plant flue gas, respectively. This low-cost, electrochemical cement production approach using abundant ubiquitous raw materials enables electrification, transition to clean fuel, and decarbonization at a gigaton scale.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Techno-economic and life cycle analysis of bio-hydrogen production using bio-based waste streams through the integration of dark fermentation and microbial electrolysis

Hydrogen derived from bio-based sources, or biohydrogen (bioH 2 ), has the potential to reduce GHG emissions from industrial and transportation sectors, owing to the low carbon footprint and myriad applications like refinery operation, ammonia production, steel production, fuel cell, etc. To evaluate the commercialization potential of bioH 2 production, we modeled bioH 2 production and conducted techno-economic analysis (TEA) and life cycle analysis (LCA) of two facilities producing 50 metric tonnes of bioH 2 per day from cheese whey (CW) and solid food waste (SFW) through the integration of dark fermentation (DF) and microbial electrolysis cell (MEC) technologies. LCA results showed that CW and SFW can produce carbon-negative bioH 2 , with emissions of −8.6 and −8.0 kg GHG kg −1 bioH 2 with carbon sequestration and renewable electricity resources, respectively, making bioH 2 potentially eligible for a tax credit of $\$3$ kg −1 H 2 based on provision 45 V of the U.S. Inflation Reduction Act (IRA). In this study, bioH 2 production treats waste streams to generate fresh water, thus, potentially can receive waste water treatment fee that varies with regions. The MEC capital cost dominates the bioH 2 cost, which is mainly determined by current density. With a current density of 20 A m −2 , the production cost for CW input varied between $\$17$ and $\$24$ kg −1 bioH 2 , while that for SFW input ranged from $\$29$ to $\$30$ kg −1 bioH 2 under different operating conditions, considering the 45 V tax credit, waste water treatment fee and production revenue. If the current density increases to 100 A m −2 , the bioH 2 cost decreases to a range of $\$4.0$–$\$6.9$ for CW and $\$5$–$\$6$ for SFW scenarios. This study also shows that low-cost bioH 2 can be produced using CW waste stream as feedstock.

Ganguly, Arna [Argonne National Laboratory (ANL), ↗
DOE OSTI2025

Acetate as a Platform for Carbon-Negative Production of Renewable Fuels and Chemicals (Final Technical Report)

This project was an industrial-academic collaboration between experts at the University of Wisconsin-Madison, the University of Kentucky, and LanzaTech, a world leader in the use of gas fermentation to sustainably produce fuels and chemicals. The project developed technologies to create an integrated process for converting carbon dioxide and renewable hydrogen into molecules that can be blended with liquid transportation fuels or used in an array of chemical applications. The project was motivated by the Program Objectives of eliminating carbon dioxide release in the production of chemicals by integrating the unique and efficient capabilities of two microorganisms into a single process. The first microbe, an acetogen, produces acetate from carbon dioxide and hydrogen while the second microbe upgrades acetate from acetogen fermentation permeates to higher-value chemical products. The carbon dioxide released in the upgrading process is recycled internally to produce more acetate. As such, the process can be designed to operate with zero carbon dioxide release and net positive carbon dioxide capture. The process has the potential to provide an alternative paradigm to the current bioeconomy – one in which acetate is the primary energy carrier instead of sugars. Our process by-passes photosynthesis and the barriers created by biomass as primary chemical feedstock. As such, the process can be scaled to meet existing sources of carbon dioxide emissions and located anywhere renewable hydrogen can be provided. Our work developed microorganisms with optimized metabolism for producing acetate and other microorganisms with improved conversion of acetate to dodecanol and dodecyl-acetate. We developed synthetic biology tools for a promising non-model bacterium that could enhance metabolic engineering efforts to convert acetate to chemical products. We conducted protein engineering studies to improve the activity of key enzymes involved in our metabolic pathways. We conducted a full technoeconomic analysis that set technical targets for each strain to meet economic goals. We identified key technical barriers in our process and proposed strategies to overcome them.

09 BIOMASS FUELS↗