Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbonate clumped isotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

InterCarb: A Community Effort to Improve Interlaboratory Standardization of the Carbonate Clumped Isotope Thermometer Using Carbonate Standards

Abstract Increased use and improved methodology of carbonate clumped isotope thermometry has greatly enhanced our ability to interrogate a suite of Earth‐system processes. However, interlaboratory discrepancies in quantifying carbonate clumped isotope (Δ 47 ) measurements persist, and their specific sources remain unclear. To address interlaboratory differences, we first provide consensus values from the clumped isotope community for four carbonate standards relative to heated and equilibrated gases with 1,819 individual analyses from 10 laboratories. Then we analyzed the four carbonate standards along with three additional standards, spanning a broad range of δ 47 and Δ 47 values, for a total of 5,329 analyses on 25 individual mass spectrometers from 22 different laboratories. Treating three of the materials as known standards and the other four as unknowns, we find that the use of carbonate reference materials is a robust method for standardization that yields interlaboratory discrepancies entirely consistent with intralaboratory analytical uncertainties. Carbonate reference materials, along with measurement and data processing practices described herein, provide the carbonate clumped isotope community with a robust approach to achieve interlaboratory agreement as we continue to use and improve this powerful geochemical tool. We propose that carbonate clumped isotope data normalized to the carbonate reference materials described in this publication should be reported as Δ 47 (I‐CDES) values for Intercarb‐Carbon Dioxide Equilibrium Scale.

58 GEOSCIENCES↗

Carbonate clumped isotope analysis (Δ 47 ) of 21 carbonate standards determined via gas‐source isotope‐ratio mass spectrometry on four instrumental configurations using carbonate‐based standardization and multiyear data sets

Rationale Clumped isotope geochemistry examines the pairing or clumping of heavy isotopes in molecules and provides information about the thermodynamic and kinetic controls on their formation. The first clumped isotope measurements of carbonate minerals were first published 15 years ago, and since then, interlaboratory offsets have been observed, and laboratory and community practices for measurement, data analysis, and instrumentation have evolved. Here we briefly review historical and recent developments for measurements, share Tripati Lab practices for four different instrument configurations, test a recently published proposal for carbonate‐based standardization on multiple instruments using multi‐year data sets, and report values for 21 different carbonate standards that allow for recalculations of previously published data sets. Methods We examine data from 4628 standard measurements on Thermo MAT 253 and Nu Perspective IS mass spectrometers, using a common acid bath (90°C) and small‐sample (70°C) individual reaction vessels. Each configuration was investigated by treating some standards as anchors (working standards) and the remainder as unknowns (consistency standards). Results We show that different acid digestion systems and mass spectrometer models yield indistinguishable results when instrument drift is well characterized. For linearity correction, mixed gas‐and‐carbonate standardization or carbonate‐only standardization yields similar results. No difference is observed in the use of three or eight working standards for the construction of transfer functions. Conclusions We show that all configurations yield similar results if instrument drift is robustly characterized and validate a recent proposal for carbonate‐based standardization using large multiyear data sets. Δ 47 values are reported for 21 carbonate standards on both the absolute reference frame (ARF; also refered to as the Carbon Dioxide Equilibrated Scale or CDES) and the new InterCarb‐Carbon Dioxide Equilibrium Scale (I‐CDES) reference frame, facilitating intercomparison of data from a diversity of labs and instrument configurations and restandardization of a broad range of sample sets between 2006, when the first carbonate measurements were published, and the present.

58 GEOSCIENCES↗

Dual carbonate clumped isotopes (Δ 47 -Δ 48 ) constrains kinetic effects and timescales in peridotite-associated springs at the Cedars, Northern California

The Cedars is an area in Northern California with a chain of highly alkaline springs resulting from CO 2 -charged meteorological water interacting with a peridotite body. Serpentinization resulting from this interaction at depth leads to the sequestration of various carbonate minerals into veins accompanied by a release of Ca 2+ and OH – enriched water to the surface, creating an environment which promotes rapid precipitation of CaCO 3 at surface springs. This environment enables us to apply the recently developed Δ 47 -Δ 48 dual clumped isotope analysis to probe kinetic isotope effects (KIEs) and timescales of CO 2 transformation in a region with the potential for geological CO 2 sequestration. Here, we analyzed CaCO 3 recovered from various localities and identified significant kinetic fractionations associated with CO 2 absorption in a majority of samples, characterized by enrichment in Δ 47 values and depletion in Δ 48 values relative to equilibrium. Surface floes exhibited the largest KIEs (ΔΔ 47 : 0.163‰, ΔΔ 48 : -0.761‰). Surface floe samples begin to precipitate out of solution within the first hour of CO 2 absorption, and the dissolved inorganic carbon (DIC) pool requires a residence time of >100 h to achieve isotopic equilibria. The Δ 48 /Δ 47 slope of samples from the Cedars (-3.223 ± 0.519) is within the range of published theoretical values designed to constrain CO 2 hydrolysis-related kinetic fractionation (-1.724 to -8.330). The Δ 47 /δ 18 O slope (-0.009 ± 0.001) and Δ 47 /δ 13 C slope (-0.009 ± 0.001) are roughly consistent with literature values reported from a peridotite in Oman of -0.006 ± 0.002 and -0.005 ± 0.002, respectively. The consistency of slopes in the multi-isotope space suggests the Δ 47 -Δ 48 dual carbonate clumped isotope framework can be applied to study CO 2 -absorption processes in applied systems, including sites of interest for geological sequestration.

58 GEOSCIENCES↗

Equilibrated Gas and Carbonate Standard‐Derived Dual (Δ 47 and Δ 48 ) Clumped Isotope Values

Abstract Carbonate clumped isotope geochemistry has primarily focused on mass spectrometric determination of m/z 47 CO 2 for geothermometry, but theoretical calculations and recent experiments indicate paired analysis of the m/z 47 ( 13 C 18 O 16 O) and m/z 48 ( 12 C 18 O 18 O) isotopologues (referred to as Δ 47 and Δ 48 ) can be used to study non‐equilibrium isotope fractionations and refine temperature estimates. We utilize 5,448 Δ 47 and 3,400 Δ 48 replicate measurements of carbonate samples and standards, and 183 Δ 47 and 195 Δ 48 replicate measurements of gas standards from 2015 to 2021 from a multi‐year and multi‐instrument data set to constrain Δ 47 and Δ 48 values for 27 samples and standards, including Devils Hole cave calcite, and study equilibrium Δ 47 ‐Δ 48 , Δ 47 ‐temperature, and Δ 48 ‐temperature relationships. We compare results to previously published findings and calculate equilibrium regressions based on data from multiple laboratories. We report acid digestion fractionation factors, Δ* 63‐47 and Δ* 64‐48 , and account for their dependence on the initial clumped isotope values of the mineral.

58 GEOSCIENCES↗

Clumped isotope thermometry of modern and fossil snail shells from the Himalayan-Tibetan Plateau: Implications for paleoclimate and paleoelevation reconstructions

Carbonate clumped isotope thermometry has been applied to fossil mollusk shells from Tibet to reconstruct the paleoclimate and paleoelevation of the region. However, inferred paleoelevation and climatic conditions from this proxy are inconsistent with paleontological evidence. Here, we report new clumped isotope data from both modern and fossil (5–4 Ma) freshwater mollusk shells with the results of X-ray diffraction (XRD) analyses of fossil shells from the Himalayan-Tibetan Plateau. Although all of the fossil shells analyzed in this study appeared pristine based on visual inspection, XRD data reveal that more than half of these apparently “pristine” fossil shells contain trace amounts of calcite. Clumped isotope temperatures derived from the fossil shells display a large range of variation (>22 °C). Among the fossil shells analyzed, those containing traces of calcite have yielded temperatures that are on average ~10 °C lower than those with no detectable calcite from the same strata. These observations suggest that clumped isotope alteration can occur in aragonite shells in low-temperature environments and even in shells with no visible signs of alteration that contain only traces of calcite. The temperatures derived from fossil shells with no detectable calcite are on average 4 °C higher than those derived from modern shells, indicating that southwest Tibet was warmer 4–5 Ma than today. After accounting for temperature change due to global cooling, the difference in clumped isotope temperatures between pristine fossil shells and modern shells suggests that the paleoelevation of the southwestern Tibetan Plateau in the Pliocene was similar to its present-day elevation.

Geology↗

Comparative clumped isotope temperature relationships in freshwater carbonates

Lacustrine, riverine and spring carbonates represent archives of terrestrial climates and their geochemistry has been used to study palaeoenvironments. Clumped isotope thermometry is an emerging tool that has been applied to freshwater carbonates. Limited work has been done to evaluate comparative relationships between clumped isotopes and temperature in different types of modern freshwater carbonates. This study assembles an extensive calibration data set with 135 samples of modern freshwater carbonates from 96 sites and constrains the relationship between independent observations of water temperature and the clumped isotopic composition of carbonates (denoted by Δ 47 ), including new measurements, and recalculates published data in accordance with current community-defined standard values. For temperature reconstruction, the study reports a composite freshwater calibration and material-specific calibrations for biogenic carbonates (freshwater gastropods and bivalves), fine-grained carbonate (e.g. micrites), biologically mediated carbonates (microbialites and tufas) and travertines. Material-specific calibration trends show a convergence of slopes that are in agreement with recently published syntheses, but statistically significant differences in intercepts occur between some materials (e.g. some biogenics, fine-grained carbonates). These differences may arise due to unresolved seasonal biases, kinetic isotope effects and/or varying degrees of biological influence. The impact of different calibrations is shown through application to new data for glacial and deglacial age travertines from Austria and published data sets. While material-specific calibrations may yield more accurate results for biogenic and fine-grained carbonate samples, the use of material-specific and the composite freshwater calibrations generally produces values within 1.0–1.5°C of each other, and typically fall within calibration uncertainty given limitations of precision.

54 ENVIRONMENTAL SCIENCES↗

Experimental determinations of carbon and hydrogen isotope fractionations and methane clumped isotope compositions associated with ethane pyrolysis from 550 to 600°C

Methane clumped isotope compositions signify the relative natural abundances of rare, doubly substituted isotopic species of methane ( 13 CH 3 D and 12 CH 2 D 2 ) and have emerged as a new isotopic tool to trace the sources, sinks, and lifecycles of methane in the environment. Such measurements can identify equilibration (or reequilibration) temperatures if found to be in isotopic equilibrium or non-equilibrium processes (e.g., kinetically controlled reactions or mixing) if not in isotopic equilibrium. Naturally occurring thermogenic methane—formed by the thermally activated breakdown of larger organic molecules—has been found to have clumped isotope compositions consistent with equilibrium at reasonable gas formation temperatures in some settings and non-equilibrium processes occurring during either formation, migration, storage, or extraction in others. To explore the potential controls on the isotopic composition of thermogenic methane, we conducted isothermal time-series ethane pyrolysis experiments at 550 and 600 °C to measure methane and ethane 13 C/ 12 C and D/H fractionations and methane clumped isotope compositions (resolved 13 CH 3 D and 12 CH 2 D 2 ). We explore the effects of modifying the initial clumped isotope composition of ethane and the addition of water vapor to pyrolysis experiments. We observe that ethane and methane 13 C/ 12 C are controlled by kinetic isotope effects and Rayleigh distillation processes. In contrast, ethane and methane D/H and methane clumped isotope compositions appear to be controlled by a combination of these processes and hydrogen isotope exchange. The hydrogen isotope exchange processes lead to isotopic equilibrium as reaction completion is approached for both D/H (ethane/methane) and methane clumped isotope compositions. Here, we develop a chemical model based on a mass balance approach that accounts for inheritance vs. hydrogen-abstraction formation pathways for singly and doubly substituted isotopologues of ethane and methane that is compared to the experimental data. The model allows the determination of carbon and hydrogen kinetic isotope effects associated with ethane cracking and hydrogen abstraction reactions that, where applicable, we compare to prior theoretical constraints. From the comparison of the model to the experimental data, we infer that the kinetically controlled ethane and methane bulk isotope compositions and methane clumped isotope compositions are controlled by kinetic isotope effects (both primary and secondary) associated with both C–C bond and C–H bond cleavage reactions. Specifically, the methane clumped isotope compositions likely result from a combination of clumped isotope effects associated with ethane breakdown and/or assembly of methane isotopologues (expressed in terms of γ-factor parameters ≠ 1) and combinatorial effects that arise probabilistically. We discuss our experimental results in the context of recent pyrolysis experiments and observations of naturally occurring thermogenic methane. We consider a proposal consistent with observations from nature that the hydrogen isotope exchange reactions that promote equilibration of methane isotopic molecules at or near formation temperature may be facilitated by free radicals generated by pyrolysis reactions. In this framework, isotope exchange effectively ceases when pyrolysis effectively ceases locking in compositions that can be consistent with peak formation temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alpine permafrost could account for a quarter of thawed carbon based on Plio-Pleistocene paleoclimate analogue

Estimates of the permafrost-climate feedback vary in magnitude and sign, partly because permafrost carbon stability in warmer-than-present conditions is not well constrained. Here we use a Plio-Pleistocene lacustrine reconstruction of mean annual air temperature (MAAT) from the Tibetan Plateau, the largest alpine permafrost region on the Earth, to constrain past and future changes in permafrost carbon storage. Clumped isotope-temperatures (Δ 47 -T) indicate warmer MAAT (~1.2 °C) prior to 2.7 Ma, and support a permafrost-free environment on the northern Tibetan Plateau in a warmer-than-present climate. Δ 47 -T indicate ~8.1 °C cooling from 2.7 Ma, coincident with Northern Hemisphere glacial intensification. Combined with climate models and global permafrost distribution, these results indicate, under conditions similar to mid-Pliocene Warm period (3.3–3.0 Ma), ~60% of alpine permafrost containing ~85 petagrams of carbon may be vulnerable to thawing compared to ~20% of circumarctic permafrost. This estimate highlights ~25% of permafrost carbon and the permafrost-climate feedback could originate in alpine areas.

54 ENVIRONMENTAL SCIENCES↗

Massive formation of early diagenetic dolomite in the Ediacaran ocean: Constraints on the “dolomite problem”

Paleozoic and Precambrian sedimentary successions frequently contain massive dolomicrite [CaMg(CO 3 ) 2 ] units despite kinetic inhibitions to nucleation and precipitation of dolomite at Earth surface temperatures (<60 °C). This paradoxical observation is known as the “dolomite problem.” Accordingly, the genesis of these dolostones is usually attributed to burial–hydrothermal dolomitization of primary limestones (CaCO 3 ) at temperatures of >100 °C, thus raising doubt about the validity of these deposits as archives of Earth surface environments. We present a high-resolution, >63-My-long clumped-isotope temperature (T Δ47 ) record of shallow-marine dolomicrites from two drillcores of the Ediacaran (635 to 541 Ma) Doushantuo Formation in South China. Our T ∆47 record indicates that a majority (87%) of these dolostones formed at temperatures of <100 °C. When considering the regional thermal history, modeling of the influence of solid-state reordering on our T Δ47 record further suggests that most of the studied dolostones formed at temperatures of <60 °C, providing direct evidence of a low-temperature origin of these dolostones. Furthermore, calculated δ 18 O values of diagenetic fluids, rare earth element plus yttrium compositions, and petrographic observations of these dolostones are consistent with an early diagenetic origin in a rock-buffered environment. We thus propose that a precursor precipitate from seawater was subsequently dolomitized during early diagenesis in a near-surface setting to produce the large volume of dolostones in the Doushantuo Formation. Our findings suggest that the preponderance of dolomite in Paleozoic and Precambrian deposits likely reflects oceanic conditions specific to those eras and that dolostones can be faithful recorders of environmental conditions in the early oceans.

58 GEOSCIENCES↗

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗

Clumped 13 CH 2 D and 12 CHD 2 compositions of methyl groups from wood and synthetic monomers: Methods, experimental and theoretical calibrations, and initial results

Methyl groups are found in numerous biogenic and synthetic materials including geologically preserved materials such as wood. The carbon and hydrogen isotope compositions of methyl groups are used as tracers in biogeochemical cycles, as paleothermometers, and to determine the hydrogen isotopic composition of ancient rain. Here we present analyses of resolved 13 C–D ( 13 CH 2 D) and D–D ( 12 CHD 2 ) clumped isotope compositions of methyl groups as new variables for the study of methyl groups in the present and past. We first present chemical methods to extract, purify, and derivatize methyl groups from methoxyl (R–O–CH 3 ) groups as CH 3 F and CH 3 Cl, and high-resolution mass spectrometric techniques to determine the clumped isotope compositions of these species. We achieve precisions for 13 C–D clumping of ±0.25‰ and D–D clumping of ±2.5‰. We anchor our clumped isotopic measurements to a thermodynamic reference frame by first calculating the theoretical temperature dependences of 13 C–D and D–D clumping in CH 3 Cl, then placing our measurements onto this reference frame through experimental internal isotopic equilibration of CH 3 Cl at 200 °C. Finally, we provide and analyze an initial dataset of clumped 13 C–D and D–D compositions of methyl groups from various commercial/synthetic monomers and environmental woods. We observe ranges in clumped isotope compositions of ~11‰ in 13 C–D and ~48‰ in D–D, and systematic differences within these ranges between methyl groups from commercial monomers and wood. Specifically, commercial clumped 13 C–D compositions are between 0 and 3‰, which correspond to apparent equilibrium temperatures between 170 °C and the infinite temperature limit. In contrast, the clumped 13 C–D compositions of wood methoxyl groups are distinctively high (9.50–11.25‰) and 3–6‰ higher than would be expected if formed in internal isotopic equilibrium at Earth-surface temperatures. Commercial/synthetic methyl and wood methoxyl clumped D–D compositions are also distinct: -5 to +13‰ in commercial monomers vs. -35 to -8‰ in wood—such negative values cannot result from formation in isotopic equilibrium and require kinetic processes to have occurred. Overall, these results indicate that wood methoxyl groups are formed out of isotopic equilibrium and that clumped isotope compositions of methyl groups may be useful tracers of methyl group sources and sinks in the environment. For instance, isotopic clumping in methyl groups may be useful for understanding controls on isotopic clumping in methane produced by methylotrophic methanogens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geochemical, Biological, and Clumped Isotopologue Evidence for Substantial Microbial Methane Production Under Carbon Limitation in Serpentinites of the Samail Ophiolite, Oman

In hyperalkaline (pH > 10) fluids that have participated in low-temperature (<150°C) serpentinization reactions, the dominant form of C is often methane (CH 4 ), but the origin of this CH 4 is uncertain. To assess CH 4 origin in serpentinite aquifers within the Samail Ophiolite, Oman, we determined fluid chemical compositions, analyzed taxonomic profiles of fluid-hosted microbial communities, and measured isotopic compositions of hydrocarbon gases. We found that 16S rRNA gene sequences affiliated with methanogens were widespread in the aquifer. We measured clumped isotopologue ( 13 CH 3 D and 12 CH 2 D 2 ) relative abundances less than equilibrium, consistent with substantial microbial CH 4 production. Furthermore, we observed an inverse relationship between dissolved inorganic C concentrations and δ 13 C CH 4 across fluids bearing microbiological evidence of methanogenic activity, suggesting that the apparent C isotope effect of microbial methanogenesis is modulated by C availability. An additional source of CH 4 is evidenced by the presence of CH 4 -bearing fluid inclusions in the Samail Ophiolite and our measurement of high δ 13 C values of ethane and propane, which are similar to those reported in studies of CH 4 -rich inclusions in rocks from the oceanic lithosphere. In addition, we observed 16S rRNA gene sequences affiliated with aerobic methanotrophs and, in lower abundance, anaerobic methanotrophs, indicating that microbial consumption of CH 4 in the ophiolite may further enrich CH 4 in 13 C. We conclude that substantial microbial CH 4 is produced under varying degrees of C limitation and mixes with abiotic CH 4 released from fluid inclusions. This study lends insight into the functioning of microbial ecosystems supported by water/rock reactions.

58 GEOSCIENCES↗

Triple oxygen isotope compositions of globally distributed soil carbonates record widespread evaporation of soil waters

The stable isotopic composition of pedogenic carbonates is central to many studies of past climate and topography, providing a basis for our understanding of Earth's terrestrial history. A core assumption of many applications of oxygen isotope values (δ 18 O) of pedogenic carbonate is that they reflect the δ 18 O value of precipitation (rain/snow). Here, this assumption is violated if soil carbonates form in evaporated soil waters. In this work, we develop a means to identify evaporation in ancient soils using the triple oxygen isotope composition ( 16 O- 17 O- 18 O) of pedogenic carbonates.

58 GEOSCIENCES↗