Search NASA⌕ Search

SEARCH · Search NASA

Results for “carboxylic acids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Synthesis of Acid Hydrazides from Carboxylic Acids in Continuous Flow

A concise methodology for the synthesis of acid hydrazides from carboxylic acids via a continuous flow process in yields ranging from 65 to 91% is described. Using short residence times of between 13 and 25 mins, the conditions proved amenable to a variety of mono- and diacids, including aliphatic, aromatic, and heteroaromatic functionalities. Furthermore, to demonstrate scalability, a large-scale (200 g) synthesis of azelaic dihydrazide was conducted over a continuous run of 9 h with an 86% overall yield, equating to a 22 g/h output.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling the Solvation and Acidity of Carboxylic Acids Using an Ab Initio Deep Neural Network Potential

Formic and acetic acid constitute the simplest of carboxylic acids, yet they exhibit fascinating chemistry in the condensed phase such as proton transfer and dimerization. The go-to method of choice for modeling these rare events have been accurate but expensive ab-initio molecular dynamics simulations. Here, we present a deep neural network potential trained using accurate ab-initio data that can be used in tandem with enhanced-sampling methods to perform an efficient exploration of the free-energy surface of aqueous solutions of weak carboxylic acids. In particular, we show that our model captures proton dissociation and provides a good estimate of the pK a , as well as the dimerization of formic and acetic acid. This provides a suitable starting point for applications in different research areas where computational efficiency coupled with the accuracy of ab-initio methods is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct Oxidation of Primary Alcohols to Carboxylic Acids

Oxidation of primary alcohols to carboxylic acids is a fundamental transformation in organic chemistry, yet despite its simplicity, extensive use, and relationship to pH, it remains a subject of active research for synthetic organic chemists. Since 2013, a great number of new methods have emerged that utilize transition-metal compounds as catalysts for acceptorless dehydrogenation of alcohols to carboxylates. The interest in this reaction is explained by its atom economy, which is in accord with the principles of sustainability and green chemistry. Furthermore, the methods for the direct synthesis of carboxylic acids from alcohols is ripe for a modern survey, which we provide in this review.

acceptorless dehydrogenation↗
DOE OSTI2020

Engineering the cellulolytic extreme thermophile Caldicellulosiruptor bescii to reduce carboxylic acids to alcohols using plant biomass as the energy source

Abstract Caldicellulosiruptor bescii is the most thermophilic cellulolytic organism yet identified (Topt 78 °C). It grows on untreated plant biomass and has an established genetic system thereby making it a promising microbial platform for lignocellulose conversion to bio-products. Here, we investigated the ability of engineered C. bescii to generate alcohols from carboxylic acids. Expression of aldehyde ferredoxin oxidoreductase (aor from Pyrococcus furiosus) and alcohol dehydrogenase (adhA from Thermoanaerobacter sp. X514) enabled C. bescii to generate ethanol from crystalline cellulose and from biomass by reducing the acetate produced by fermentation. Deletion of lactate dehydrogenase in a strain expressing the AOR–Adh pathway increased ethanol production. Engineered strains also converted exogenously supplied organic acids (isobutyrate and n-caproate) to the corresponding alcohol (isobutanol and hexanol) using both crystalline cellulose and switchgrass as sources of reductant for alcohol production. This is the first instance of an acid to alcohol conversion pathway in a cellulolytic microbe.

Biotechnology & Applied Microbiology↗
DOE OSTI2022

Elucidation of the Roles of Water on the Reactivity of Surface Intermediates in Carboxylic Acid Ketonization on TiO 2

The effects of water on the carboxylic acid ketonization reaction over solid Lewis-acid catalysts were examined by nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), temperature-programmed desorption (TPD), and kinetic measurements. Acetic acid and propanoic acid were used as model compounds, and P25 TiO 2 was used as a model catalyst to represent the anatase TiO 2 since the rutile phase only contributes to <2.5% of the overall ketonization activity of P25 TiO 2 . The kinetic measurement showed that introducing H 2 O vapor in gaseous feed decreases the ketonization reaction rate by increasing the intrinsic activation barrier of gas-phase acetic acid on anatase TiO 2 . Quantitative TPD of acetic acid indicated that H 2 O does not compete with acetic acid for Lewis sites. Instead, as indicated by combined approaches of NMR and DRIFTS, H 2 O associates with the adsorbed acetate or acetic acid intermediates on the catalyst surface and alters their reactivities for the ketonization reaction. There are multiple species present on the anatase TiO 2 surface upon carboxylic acid adsorption, including molecular carboxylic acid, monodentate carboxylate, and chelating/bridging bidentate carboxylates. The presence of H 2 O vapor increases the coverage of the less reactive bridging bidentate carboxylate associated with adsorbed H 2 O, leading to lower ketonization activity on hydrated anatase TiO 2 . In conclusion, surface hydroxyl groups, which are consumed by interaction with carboxylic acid upon the formation of surface acetate species, do not impact the ketonization reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Selective carboxylation of alkenes with CO 2 to form unsaturated carboxylic acid on Sc-exchanged MFI zeolite

Utilization of CO 2 in chemical synthesis as C1 carbon feedstock to introduce a carboxylic group into alkene is valuable for producing unsaturated carboxylic acids. Selective carboxylation of alkenes at targeted positions can be used to regulate the production of such specific unsaturated carboxylic acids or functionalize hydrocarbon plastics that possess residual C=C double bonds. In this study, we investigated the carboxylation of 1-butene and 2-butene (as representative alkene) with CO 2 on Sc-exchanged MFI zeolites using density functional theory calculations. Here, we find that similar to ethylene, the carboxylation of butene is also rate-limited by the β–H transfer. We examined carboxylation at the C1 and C2 positions of 1-butene and cis and trans isomers for 2-butene. Based on activation barriers of the β–H transfer, our results demonstrate that Sc-MFI zeolite preferably carboxylates at the terminal position of butene. In the case of 2-butene, carboxylation of the trans isomer is more favorable than the cis isomer. Furthermore, We show that the energy of degenerate orbitals of C, O and H atoms (involved in the β–H transfer) in the metallalactone ring regulates the activation energy of the β–H transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Crystal structure of anthraquinone-2-carboxylic acid, C 15 H 8 O 4

The crystal structure of anthraquinone-2-carboxylic acid has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional theory techniques. Anthraquinone-2-carboxylic acid crystallizes in space groupP-1 (#2) witha= 3.7942(2),b= 13.266(5),c= 22.835(15) Å,α= 73.355(30),β= 89.486(6),γ= 86.061(1)°,V= 1098.50(7) Å 3 , andZ= 4. The crystal structure contains two independent molecules of anthraquinone-2-carboxylic acid. Although the expected hydrogen-bonded dimers are present, the dimers are not centrosymmetric. The dimer contains one molecule of each planar low-energy conformation. The crystal structure consists of a herringbone array of centrosymmetric pairs of molecules parallel to thebc-plane. The molecules stack along the shorta-axis. The powder pattern has been submitted to ICDD® for inclusion in the Powder Diffraction File™ (PDF®).

Materials Science↗
DOE OSTI2020

Anodic electrocatalytic conversion of carboxylic acids on thin films of RuO 2 , IrO 2 , and Pt

The electrocatalytic upgrading of carboxylic acids, abundant biomass-derived molecules, remains a challenging task. In this paper, we report an electrocatalytic decarboxylation (ECDX) approach for the conversion of carboxylic acids into paraffins, olefins, and alcohols via (non-)Kolbe electrolysis on thin films (TFs). The ECDX rate, product selectivity, and current efficiency were potential and electrode dependent. For example, the ECDX activity of RuO 2 -TF was similar to that of Pt foil, but the selectivity to Kolbe products was lower on the former. RuO 2 -TF showed about five times higher rates for the oxygen evolution reaction than Pt foil, which resulted in lower current efficiency. The ECDX and O 2 evolution activities of IrO 2 -TF were potential dependent, but this electrode was selective to non-Kolbe products with low current efficiency (<10 %). This work highlights the performance of thin films as an alternative to bulk metals as anodes for oxidative upgrading of carboxylic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

On the Mechanism of Catalytic Decarboxylation of Carboxylic Acids on Carbon-Supported Palladium Hydride

The high chemical stability of aliphatic carboxylic acid makes catalytic decarboxylation at low temperatures challenging. We show that arylaliphatic acids (Ar-CnH2n-COOH, n = 1) decarboxylate on carbon-supported Pd nanoparticles (Pd/C) at 90 °C with 100% selectivity. In situ XANES during decarboxylation of preadsorbed substrates indicates that the active phase is a-phase palladium hydride (a-PdHx). The reaction rate is enhanced by one order of magnitude when hydrogen is preadsorbed. Tracing deuterium labeling positions, it is concluded that carboxylic acid (Ar-CnH2n-COOH) undergoes an a-C-H bond dissociation on the Pd surface to the Ar-(CH2)n-1-CH*-COO* intermediate in the first step, followed by the C-COO scission, and finally, Ar-(CH2)n-1- CH* reacts with two sorbed H to produce Ar-(CH2)n-1-CH3. The high rates are related to the concentration of hydride present on the catalyst particles to complete the catalytic cycle in a Mars-van Krevelen-type mechanism and the rate of H/D exchange at the a-C- H position.

Pd/C catalyst, palladium hydride, arylaliphatic ca↗
DOE OSTI2022

CO 2 Chemisorption Behavior in Conjugated Carbanion-Derived Ionic Liquids via Carboxylic Acid Formation

Superbase-derived task-specific ionic liquids (STSILs) represent one of the most attractive and extensively studied systems in carbon capture via chemisorption, in which the obtained CO 2 uptake capacity has a strong relationship with the basicity of the anions. High energy input in desorption and side reactions caused by the strong basicity of the anions are still unsolved issues. The development of other customized STSILs leveraging an alternative driving force to achieve efficient CO 2 chemisorption/desorption is highly desirable yet challenging. Here, in this work, carbanion-derived STSILs were developed for efficient CO 2 chemisorption via a carboxylic acid formation pathway. The STSIL with the deprotonated malononitrile molecule ([MN]) as the anion exhibited much higher CO 2 uptake capacity than the one derived from 2-methylmalononitrile ([MMN]). Notably, this trend was opposite to their basicity ([MN] < [MMN]). Detailed characterization of the products, supported by density functional theory simulations of spectra and calculations of the reaction energetics, demonstrated that carboxylic acid was formed upon reacting with CO 2 via proton transfer in [MN]-derived STSILs but not in the case of [MMN] due to lack of an α-H. The preference of the carboxylic acid product over carboxylate formation was driven by the extended conjugation among the central sp 2 carbon, the as-formed carboxylic acid, and the two nitrile groups. The achievements made in this work provide an alternative design principle of STSILs by leveraging the extended conjugation in the CO 2 -integrated product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Biocatalytic Carboxylic Acid Reduction and Transamination in Cell‐Free Lysates at High Substrate Loading

Chemoselective reduction of stable carboxylic acids to reactive aldehydes is of interest across many industries. While carboxylic acid reductases (CARs) are promising biocatalysts for this chemistry, poor chemoselectivity and low yield are commonly obtained when using less expensive crude lysate preparations and prerequisite ATP and NADPH regeneration systems. Here, in this work, we developed a highly chemoselective multienzyme cascade featuring a CAR and an ω-transaminase (TA) in crude lysate format, with conversion of the dicarboxylic acid terephthalic acid (TPA) into the diamine para -xylylenediamine (pXDA) as the model chemistry. We improved chemoselectivity for pXDA using engineered aldehyde-stabilizing Escherichia coli strains, though desired product yields remained modest. We next found that CAR activity was limited at high substrate loadings and overcame this bottleneck by modulating the ratio of polyphosphate (polyP 6 ) to Mg 2+ , enabling volumetric scaling and increased substrate loading up to 50 mM TPA. We then showcased the portability of this platform across substrates, resulting in the synthesis of four other high-value amines from carboxylate precursors. The combination of high carboxyl group turnover, up to 93.5 mM under the tested conditions, and the simplicity of crude enzyme preparation is a promising platform for sustainable functional group interconversion.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

La 3+ and Y 3+ interactions with the carboxylic acid moiety at the liquid/vapor interface: Identification of binding complexes, charge reversal, and detection limits

Specific interactions of yttrium and lanthanum ions with a fatty acid Langmuir monolayer were investigated using vibrational sum frequency spectroscopy. The trivalent ions were shown to interact with the charged form of the carboxylic acid group from nanomolar concentrations (<300 nM). Analysis of the spectral features from both the symmetric and the asymmetric carboxylate modes reveals the presence of at least three distinct coordination structures linked to specific binding configurations. Although the same species were identified for both La 3+ and Y 3+ , they display a different concentration dependence, highlighting the ion-specificity of the interaction. From the analysis of the response of interfacial water molecules, the reversal of the surface charge, as well as the formation of yttrium hydroxide complexes, were detected upon increasing the amount of salt in solution. The binding interaction and kinetics of absorption are sensitive to the solution pH, showing a distinct ion speciation in the interfacial region when compared to the bulk. Changing the subphase pH or adding a monovalent background electrolyte that promotes deprotonation of the carboxylic acid headgroup could further improve the detection limit of La 3+ and Y 3+ to concentrations < 100 nM. These findings demonstrate that nM concentrations of trace metals contaminants, typically found on monovalent salts, can significantly influence the binding structure and kinetics in Langmuir monolayers.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Photochemical phosphorus-enabled scaffold remodeling of carboxylic acids

The excitation of carbonyl compounds by light to generate radical intermediates has historically been restricted to ketones and aldehydes; carboxylic acids have been overlooked because of high energy requirements and low quantum efficiency. A successful activation strategy would necessitate a bathochromic shift in the absorbance profile, an increase in triplet diradical lifetime, and ease of further functionalization. We present a single-flask transformation of carboxylic acids to acyl phosphonates that can access synthetically useful triplet diradicals under visible light or near-ultraviolet irradiation. The use of phosphorus circumvents unproductive Norrish type I processes, promoting selectivity that enables hydrogen-atom transfer reactivity. Use of this strategy promotes the efficient scaffold remodeling of carboxylic acids through various annulation, contraction, and expansion manifolds.

Science & Technology - Other Topics↗
DOE OSTI2022

A Unified Approach to Decarboxylative Halogenation of (Hetero)aryl Carboxylic Acids

Aryl halides are a fundamental motif in synthetic chemistry, playing a critical role in metal-mediated cross-coupling reactions and serving as important scaffolds in drug discovery. Although thermal decarboxylative functionalization of aryl carboxylic acids has been extensively explored, the scope of existing halodecarboxylation methods remains limited, and there currently exists no unified strategy that provides access to any type of aryl halide from an aryl carboxylic acid precursor. Herein, we report a general catalytic method for direct decarboxylative halogenation of (hetero)aryl carboxylic acids via ligand-to-metal charge transfer. This strategy accommodates an exceptionally broad scope of substrates. Here, we leverage an aryl radical intermediate toward divergent functionalization pathways: (1) atom transfer to access bromo- or iodo(hetero)arenes or (2) radical capture by copper and subsequent reductive elimination to generate chloro- or fluoro(hetero)arenes. The proposed ligand-to-metal charge transfer mechanism is supported through an array of spectroscopic studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Upcycling of Waste Plastics into Carboxylic Acids for Biodegradable Surfactants

This work outlines a process for producing high‐purity (>95%) carboxylate surfactants from post‐consumer recycled high‐density polyethylene (PCR‐HDPE). The approach involves the thermal depolymerization of PCR‐HDPE via pyrolysis, followed by fractional distillation to isolate C9–C14 olefins. These olefins undergo hydroformylation using cobalt carbonyl catalysts to generate aldehydes, which are subsequently oxidized to carboxylic acids using Pinnick oxidation under mild aqueous‐phase conditions. Neutralization of the resulting carboxylic acids with sodium hydroxide produces plastic‐derived carboxylate surfactants (PDCs) in the form of sodium carboxylates. Subsequent purification steps ensure surfactant‐grade purity and enable accurate assessment of physicochemical properties. The resulting PDCs are evaluated for critical micelle concentration (CMC), foamability, surface tension reduction, and calcium ion tolerance, demonstrating competitive behavior with conventional anionic carboxylate surfactants. This route provides a sustainable alternative for surfactant production, reducing reliance on fossil‐derived feedstocks and valorizing plastic waste streams through chemical upcycling.

Biodegradable surfactants↗