SEARCH · Search NASA
Results for “catalytic temperature”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Processing of SOFC Anodes for Enhanced Intermediate Temperature Catalytic Activity at High Fuel Utilization (Final Report)
The overall objective was to infiltrate anodes with nanoparticle catalysts so that anode catalytic performance can be improved as anode operation temperature is reduced from 800°C to intermediate temperatures of 700°C and 600°C and as anode fuel utilization is increased. The addition of nickel nanoparticle catalysts into the anode improves performance by providing additional triple phase boundaries (TPBs), increasing the density of electrochemical reaction sites. To achieve this goal, both liquid phase and vapor phase methods for depositing nickel nanoparticles in the anode active layer, the region of the anode near the electrolyte where the electrochemical reaction occurs. It is imperative that nanoparticles are stable against coarsening during long-term operation, so the mechanisms and kinetics of nanoparticle stability during cell operation will be investigated. Finally, priority is given to processes that are scalable and easily transferable to industry, leveraging existing Ni-YSZ cermet anode technology. Utilizing nickel nanoparticles at different temperatures has different considerations that will be addressed. At the upper end of the intermediate temperature range (800°C), it is important that performance improvement is maintained over long periods by mitigating the instability of nanoparticles. At the middle of the temperature range (700°C), it is important that performance improvement is maintained at high fuel utilizations. At the lower end of the temperature range (600°C), where the performance of cells is poor due to increased resistances, it is important to improve anode performance by significantly increasing the electrochemical reaction site density, while nanoparticle durability is less of an issue. Finally, the objective was to explore mixed ionic and electronic (MIEC) nanoparticle catalysts like GDC to see if 2-phase boundaries can be created to increase the electrochemical reactions at the anode.
Low temperature catalytic conversion of CH 4 , CO 2 , and C 2 H 4 to value-added C 3 oxygenates and olefins via C 1 -C 2 coupling on Pd-Au/CeO 2
The catalytic conversion of CH 4 and CO 2 in the presence of more reactive co-reactants C 2 H 4 and O 2 on Pd-Au/CeO 2 is achieved at 200 °C and elevated pressures. Propene and acetone were produced from the catalyzed reaction of CH 4 +C 2 H 4 +O 2 ; addition of CO 2 to the reactant stream produced methyl acetate (MAc) but it significantly reduced the C-selectivities of propene and acetone. DRIFTS experiments confirmed the formation of methoxy species from CH 4 +CO 2 at 200 °C, which is an intermediate in the formation of MAc. Here, control experiments with blanks, and with CeO 2 did not show any propene, acetone, or MAc products. The complete oxidation of C 2 H 4 was avoided; the catalyst is stable, and reactant conversions and product yields were sustained for the observed 1200 min time-on-stream, indicating that there is little or no carbon deposition and sintering. This direct coupling of CH 4 and C 2 H 4 intermediates to higher carbon-number products at 200 °C is significant.
Effect of bimetallic modification on blast furnace slag and its application in low‐temperature selective catalytic reduction
Abstract Objective In order to control NO x in low‐temperature flue gases emitted from non‐power industries and to reduce the preparation cost of denitration catalysts, this study uses inexpensive blast furnace slag as raw material to prepare denitration catalysts. Methods After cooling, drying and grinding, the blast furnace slag becomes a powder with considerable fineness and meets the requirements of activity index, which is called GGBS (ground granulated blast furnace slag). Using GGBS as denitration catalyst carrier, the active components M (M = Fe, Co, Ni, Cu and Ce) are loaded on Mn‐based GGBS catalyst using an impregnation method. Conclusions The effect of different active components on the denitration performance and sulfur resistance of Mn‐based GGBS catalysts is investigated. The results show that the Mn‐Ce/GGBS catalyst has better denitration performance and sulfur resistance. The Mn‐Ce/GGBS catalyst has a significant denitration performance when load ratio is 2:1. The active component Ce improves the denitration performance of the catalyst, reduces sulfur poisoning and extends the life of the catalyst. The SO 2 in the flue gas increases the acid sites on the catalyst surface and improves catalyst activity. The larger the ratios of Mn 4+ /Mn 3+ , Ce 4+ /Ce 3+ and O α /O β , the stronger the catalyst activity and the better the denitration performance. © 2022 Society of Chemical Industry (SCI).
Recent advances in hybrid metal oxide–zeolite catalysts for low-temperature selective catalytic reduction of NOx by ammonia
A hybrid catalytic system comprised of metal oxide and Cu or Fe exchanged zeolite components represents a potential advancement of state-of-the-art for selective catalytic reduction (SCR) of NOx by ammonia, including an elegant solution to the current challenge of improving the low-temperature efficiency of SCR catalysts. The idea is to enable in-situ NO oxidation over metal oxide component and concomitant fast SCR over zeolite component in the so-called “bifunctional mechanism”. This review is presented in the wake of growing interest in this innovative catalytic system. We begin this review by presenting key parameters that contribute to the synergy between metal oxide and zeolite components. Then, we discuss the materials selection for both components and their possible interactions in the system, followed by a summary of recent NH3-SCR investigations over multiple metal oxide–zeolite pairs and additional discussion on pairing techniques potentially explorable in upcoming studies. Finally, we end the review by providing the perspectives on future challenges in the development of this catalytic system.
Compact ammonia reforming at low temperature using catalytic membrane reactors
Ammonia is a leading carrier for the storage and transport of renewable hydrogen, but its deployment requires scalable technologies for efficient decomposition and purification. In this work, we report on the efficient delivery of high purity hydrogen from ammonia decomposition using a catalytic membrane reactor (CMR). Improvements to the electroless plating process reduced the Pd membrane thickness by >35%, resulting in commensurate increases in hydrogen permeance without sacrificing selectivity. To increase throughput a commercial Ru/Al 2 O 3 catalyst was added to the lumen, and the CMR could process ammonia flowrates 10–50 times higher than an equivalent packed bed reactor while maintaining the same level of conversion. It is shown that the earth-abundant zeolite clinoptilolite could reduce ammonia impurities in the permeated H 2 to the levels required by PEM fuel cells (<25 ppb). Performance increased significantly across a >500-h durability test due to improvements in membrane permeability. Finally, the results show that CMRs are a viable technology for distributed production of hydrogen from ammonia.
Catalytic Ambient Temperature Dinitrogen Conversion to a Bis(silyl)amine by Mononuclear Group 4 Aryloxide Complexes
The homogeneous conversion of ambient dinitrogen to amine products via the N2 reduction reaction (N2RR) remains a prized yet challenging feat for d-block complexes and is scarcely reported for f-block complexes. New, mononuclear TiIV and ZrIV aryloxide complexes Ti(DP)2 (1Ti), Zr(DP)2 (1Zr), and DP = [2-(OC6H2-2-tBu,4-Me)2CHPh] produce up to 51 eq. and up to 7.0 eq. of HN(SiMe3)2 per Ti/Zr, from N2, K0, weak acid, and chlorotrimethylsilane. Complex 1Ti exhibits more than double the activity toward N2-silylation of any previously reported Ti N2RR catalyst and can also catalyze the formation of up to 19 eq. of NH3, a new feature in early metal N2RR chemistry. The mononuclear 1Zr is the most active Zr catalyst for N2-silylation to date. [KSm(DP)2(THF)3] (1Sm), the mononuclear analogue of our previously reported dinuclear A-Sm complex, displays only stoichiometric N2-silylation due to its vulnerability to deleterious side reactions. DFT calculations confirm the catalysis can proceed via a monomeric Ti complex with a terminally bound, activated N2, agreeing with experimental 1H DOSY NMR measurements; the N-H bond is formed first, directing the catalyst selectivity. The isolable reduction product [K3(THF)Ti(DP)(DP-)(N2)] is also an active catalyst, and an intermediate in the calculated cycle.
A Study on the Role of Electric Field in Low-Temperature Plasma Catalytic Ammonia Synthesis via Integrated Density Functional Theory and Microkinetic Modeling
Not Available
Improving Enzyme Optimum Temperature Prediction with Resampling Strategies and Ensemble Learning
Accurate prediction of the optimal catalytic temperature ( T opt ) of enzymes is vital in biotechnology, as enzymes with high T opt values are desired for enhanced reaction rates. Recently, a machine learning method (temperature optima for microorganisms and enzymes, TOME) for predicting T opt was developed. TOME was trained on a normally distributed data set with a median T opt of 37 °C and less than 5% of T opt values above 85 °C, limiting the method’s predictive capabilities for thermostable enzymes. Due to the distribution of the training data, the mean squared error on T opt values greater than 85 °C is nearly an order of magnitude higher than the error on values between 30 and 50 °C. Here, we apply ensemble learning and resampling strategies that tackle the data imbalance to significantly decrease the error on high T opt values (>85 °C) by 60% and increase the overall R 2 value from 0.527 to 0.632. The revised method, temperature optima for enzymes with resampling (TOMER), and the resampling strategies applied in this work are freely available to other researchers as Python packages on GitHub.
In Situ Catalytic Fast Pyrolysis using Red Mud Catalyst: Impact of catalytic fast pyrolysis temperature and biomass feedstocks
Catalytic fast pyrolysis (CFP) has been considered as a very promising approach for converting lignocellulosic biomass into higher-quality bio-oils followed by hydrotreating to produce fuelrange products. A reactive, robust, and low-cost catalyst is required to drive the CFP process. Red mud, a side-product produced during the refining of bauxite to alumina, appears to be an effective catalyst for in situ CFP of biomass. In this paper, we report the impact of CFP reaction temperature on the conversion of a pinyon juniper feedstock to bio-oils using red mud as the catalyst and then to fuel-range hydrocarbons by hydrotreating of the produced bio-oil. The yield and quality of the CFP bio-oil produced and the yield and quality of hydrotreated final products were determined. When the CFP process temperature was lowered from 450 to 400ºC, the bio-oil yield increased with minimal differences in the oxygen content, hydrogen-to-carbon ratio, water content, etc. In addition, CFP bio-oils at both temperatures were processed in a single-stage continuous hydrotreater without reactor plugging during the testing period (i.e., ~100 hours on stream). The yield of CFP bio-oil produced at 400ºC was lower than the yield at 450ºC. However, the overall yield, from biomass to hydrocarbon fuel, was still higher for CFP processing at 400ºC than for processing at 450ºC. This indicates the potential for enhancing overall carbon efficiency, including CFP processing and hydrotreating, by employing red mud catalysts for biomass pyrolysis and tuning the CFP parameters. Detailed analysis of bio-oil and hydrotreated products showed a lower content of lignin-derived species in both samples. Furthermore, CFP processing of three different biomass feedstocks corroborated red mud catalyst development for producing improved quality bio-oil and, when combined with hydrotreating, for the production of fuel range hydrocarbons.
Optimizing Process Conditions during Catalytic Fast Pyrolysis of Pine with Pt/TiO 2 —Improving the Viability of a Multiple-Fixed-Bed Configuration
Catalytic fast pyrolysis (CFP) has been identified as a promising pathway for the production of renewable fuels and co-products. However, continued technology development is needed to increase process efficiency and reduce process costs. This report builds upon previous research in which a bifunctional metal–acid Pt/TiO 2 catalyst was utilized in a fixed-bed reactor operated with co-fed H 2 to improve product yield and reduce coke generation compared to conventional CFP methods. Here, we report further process optimization, in which we achieved similar CFP oil carbon efficiency (>35%) and CFP oil oxygen content (<20 wt %) to our previous report while reducing catalyst and equipment costs by increasing time-on-stream between regenerations by 40–95% and decreasing required regeneration time by more than a factor of 2. These process improvements were achieved by conducting parameter sweeps to determine optimum conditions for CFP and regeneration with key variables including pyrolysis temperature, catalytic upgrading temperature, hydrogen partial pressure, and regeneration oxygen concentration. Coupled with comprehensive oil analyses, these data provide foundational insight into the deoxygenation and coking chemistries for CFP under realistic process conditions while also advancing the technology through applied engineering.
Solar Decarbonization of Paraffin Dehydrogenation Through Particle Heat Carriers (Final Technical Report)
This project focuses on solutions to decarbonize high-temperature catalytic processes using solar thermal heat. The primary project goal is to show the validity of a moving packed bed reactor for propane dehydrogenation using catalyst particles as the heat carrier for the reaction, which can be heated by concentrated solar energy in a particle receiver. This concept, if further developed, may provide a cost-effective pathway for converting lower value gases to important chemical precursors for industrial materials using only renewable energy. The project was divided into six tasks. In Task 1, DFT calculations were performed to understand the role of Pt and Sn in the catalytic dehydrogenation reaction. In Task 2 chemical kinetics measurements were made for several catalyst formulations at high temperatures. In Task 3, the solar absorptance of catalyst particles was compared to the absorptance of commonly used materials in particle receivers. In Task 4, numerical models were developed which could predict performance of the complete system and predict specific temperatures in the system. In Task 5, a prototype system was designed, fabricated, and tested to show the validity of the concept. Task 6 concerned project management activities. Experiments with the prototype showed repeatable thermal performance at temperatures targeted for the reaction. A limited set of tests were done with active catalyst and propane dehydrogenation, showing conversion of propane to propylene with a range of conversions and selectivities. The results are promising, and the prototype designed was reliable during testing, and the team expects that further development of the prototype would yield improved results. A numerical model framework based on coupled fluid and particle mechanics was developed with high computational efficiency using GPU calculations. The model may prove highly useful for evaluating other high-temperature particle systems. However, it was determined that simpler porous media models were good fits for the needs of the current moving packed bed concept. Data showing strong solar absorption of the particles validates the plan of using existing solar particle receivers with only a change in the particle type. Catalyst investigation showed that Pt 1 Sn 3 is the most viable candidate for developing PtSn catalysts for high temperature propane dehydrogenation, considering the balance of activity, selectivity, and deactivation. This project completed an initial study of various factors needed to incorporate a moving bed catalytic reactor for propane dehydrogenation into a concentrated solar thermal particle system. Future developments may allow this technology to be scaled up and help to use solar thermal energy to decarbonize not only the propane dehydrogenation reaction, but other gas-solid catalytic reactions at similar temperatures.
Grain‐Boundary‐Rich Noble Metal Nanoparticle Assemblies: Synthesis, Characterization, and Reactivity
Abstract Here, a comprehensive study on the synthesis, characterization, and reactivity of grain‐boundary (GB)‐rich noble metal nanoparticle (NP) assemblies is presented. A facile and scalable synthesis of Pt, Pd, Au, Ag, and Rh NP assemblies is developed, in which NPs are predominantly connected via Σ3 (111) twin GBs, forming a network. Driven by water electrolysis, the random collisions and oriented attachment of colloidal NPs in solution lead to the formation of Σ3 (111) twin boundaries and some highly mismatched GBs. This synthetic method also provides convenient control over the GB density without altering the crystallite size or GB type by varying the NP collision frequency. The structural characterization reveals the presence of localized tensile strain at the GB sites. The ultrahigh activity of GB‐rich Pt NP assembly toward catalytic hydrogen oxidation in air is demonstrated, enabling room‐temperature catalytic hydrogen sensing for the first time. Finally, density functional theory calculations reveal that the strained Σ3(111) twin boundary facilitates oxygen dissociation, drastically enhancing the hydrogen oxidation rate via the dissociative pathway. This reported large‐scale synthesis of the Σ3 (111) twin GB‐rich structures enables the development of a broad range of high‐performance GB‐rich catalysts.
Low-Temperature Production of Battery Grade Graphite from Coal with Recovery and Reuse of the Catalyst
Synthetic graphite is made predominantly from a petroleum-derived needle coke using the Acheson method. This involves heating the needle coke at elevated temperatures of ~ 3000 °C for more than 7 days. High-temperature heating is the most technically challenging, expensive, and energy-intensive aspect of graphite manufacturing. We will present a strategy for synthesizing high-quality battery-grade graphite powder from coal using a low-temperature catalytic graphitization process. The use of a catalyst drops the processing temperatures to 1500 °C and processing times to a few hours. The graphite produced with this process has been tested as a battery anode and has been shown to outperform anodes made with commercially sourced graphite materials. We will also present a sustainable method to recover and reuse the catalyst and acid used to retrieve the catalyst. This overcomes a long-standing technical hurdle associated with using catalysts for manufacturing graphite.
Highly Crystalline Graphite Synthesis from Coal with a Sustainable Process
Synthetic graphite is made predominantly from a petroleum-derived needle coke using the Acheson method. This involves heating the needle coke at elevated temperatures of ~ 3000 °C for more than 7 days. High-temperature heating is the most technically challenging, expensive, and energy-intensive aspect of graphite manufacturing. We will present a strategy for synthesizing high-quality graphite powder from coal using a low-temperature catalytic graphitization process. The use of a catalyst drops the processing temperatures to 1500 °C and processing times to a few hours. The graphite produced with this process has been characterized and has been shown to have comparable physical/chemical properties with commercially sourced graphite materials. We will also present a sustainable method to recover and reuse the catalyst and acid used to retrieve the catalyst. This overcomes a long-standing technical hurdle associated with using catalysts for manufacturing graphite.
Inorganometallic Catalyst Design Center (ICDC) EFRC Accomplishments
The ICDC focused largely on heterogeneous catalysis of oxidative chemical transformations, especially those that came to prominence as natural gas (wet shale gas) supplanted crude oil as the primary feedstock in North America for carbon-based manufacturing of commodity chemicals. Driven by fracking-enabled access to enormous stores of shale-trapped wet gas, the feedstock change from oil to gas enabled a shift away from high-temperature catalytic breakdown of large hydrocarbons to catalytic build-up of C4, C3, C2, and C1 into desired intermediates, but now at much more modest temperatures. In turn, the much lower thermal force accompanying these kinds of reactions facilitates catalyst stabilization and characterization, including operando characterization, while slowing on-stream catalyst evolution (i.e., preserving catalyst structure), accommodating catalyst complexity, and enabling creation of uniform arrays of heterogeneous catalysts with single-atom or near-single-atom precision—at least for model systems. Together these features have proven to be a boon to hypothesis-driven catalysis science and to experimentally testable computation-based design advances and mechanism explication. The ICDC has greatly facilitated the integration of catalyst synthesis, advanced characterization, performance assessment, and computational elucidation—with advances in each of these realms spurring achievements in catalysis science and complementary realms.
Highly active Ni/CeO2 catalyst for CO2 methanation: Preparation and characterization
Explore the source record for details and available documents.
Solvent effects on the heterogeneous growth of TiO 2 nanostructure arrays by solvothermal synthesis
One-dimensional titanium dioxide (TiO 2 ) nanostructure arrays (nanoarrays) are important metal oxide nanomaterials that can be synthesized via facile solvothermal methods. The properties of the organic solvents can impose significant effects on the microstructures and properties of the final products. However, the discussions were limited to the homogeneously nucleated TiO 2 nanomaterials in free-standing powder form, while the solvent effects are less understood during the heterogeneous growth of TiO 2 nanoarrays on a substrate surface. In this work, six organic compounds, namely 2-butanone, n-decane, n-hexane, toluene, ethylene glycol and ethanol, were selected as the solvents for the solvothermal synthesis of TiO 2 nanoarrays on the cordierite monolithic substrates. Special attentions are paid to the morphology, crystallinity, specific surface area, and porosity of the samples. The heterogeneous growth of TiO 2 nanoarrays on substrate surfaces is found to favor the solvents with moderate dielectric constants, which can be partially dissolved in the aqueous solution and modulate the reaction rate during the solvothermal synthesis. Organic solvents with low dielectric constants may result in a complete separation between the precursors and aqueous solution, and therefore slow down the overall reaction, causing the insufficient growth of the nanoarrays. The TiO 2 nanoarrays are obtained with optimum morphology from the combination of 2-butanone and titanium (IV) butoxide as solvent and precusor, respectively, with a high specific surface area up to 56 m 2 /g including cordierite substrate given a micron thickness. When loaded with Pt catalyst, the TiO 2 nanoarray-based monolithic catalysts show excellent low-temperature catalytic activity and hydrothermal stability for the CO and hydrocarbon oxidation under the simulated exhausted conditions. This article shall shed light on a better understanding of the growth mechanism and rational design of TiO 2 nanoarrays for high-performance catalytic converters.