Search NASA⌕ Search

SEARCH · Search NASA

Results for “cation vacancies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electrical properties of AC{sub 3}B{sub 4}O{sub 12}-type perovskite ceramics with different cation vacancies

Highlights: • AC{sub 3}B{sub 4}O{sub 12} perovskite with different concentration cation vacancies were prepared. • Cell parameter decreases with the increase of concentration of cation vacancies. • PTCO and CTO remain high dielectric permittivity but depress loss greatly. • Dielectric loss associates with cation vacancies and motion of oxygen vacancies. - Abstract: AC{sub 3}B{sub 4}O{sub 12}-type perovskite CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO), □{sub 0.34}Pr{sub 0.67}Cu{sub 3}Ti{sub 4}O{sub 12} (PCTO), □{sub 1}Cu{sub 3}Ta{sub 2}Ti{sub 2}O{sub 12} (CTTO), □{sub 2}Cu{sub 2}Ta{sub 4}O{sub 12} (CTO) ceramics with different concentration cation vacancies were prepared through traditional solid state reaction method. X-ray diffraction analysis indicated that CCTO and PCTO are perovskite cubic with space group Im-3 (no. 204) while CTTO and CTO are Pm-3 (no. 200). Cell parameter of the samples dramatically increases with the increase of cation vacancies. Dielectric permittivity of them maintains very high value of ∼10{sup 4} from room temperature to 550 K but the dielectric loss is depressed with the increase of cation vacancies in the same space group. The dielectric properties and conductivity behavior were described by the Debye relaxation and the universal dielectric response, respectively. The effect mechanism of cation vacancy and crystal structure on carrier transposition were discussed.

36 MATERIALS SCIENCE↗

Contrasting SnTe–NaSbTe 2 and SnTe–NaBiTe 2 Thermoelectric Alloys: High Performance Facilitated by Increased Cation Vacancies and Lattice Softening

Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe 2 and NaBiTe 2 (NaSn m SbTe m +2 and NaSn m BiTe m +2 , respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe 2 , but not NaBiTe 2 , into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe 2 and NaBiTe 2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSn m BiTe m +2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSn m SbTe m +2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe 2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSn m SbTe m +2 reaches high ZT ≈ 1.2 at 800–900 K and a competitive average ZT avg of 0.7 over 300–873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strategies to Suppress Cation Vacancies in Metal Oxide Alloys: Consequences for Solar Energy Conversion

First-row transition metal oxides (TMOs) are promising alternative materials for inexpensive and efficient solar energy conversion. However, their conversion efficiency can be deleteriously affected by material imperfections, such as atomic vacancies. In this work, we provide examples showing that in some iron-containing TMOs, iron cation vacancy formation can be suppressed via alloying. We calculate within density functional theory+U theory the iron vacancy formation energy in binary rock-salt oxide alloys that contain iron, manganese, nickel, zinc, and/or magnesium. We demonstrate that formation of iron vacancies is less favorable if we choose to alloy iron(II) oxide with metals that cannot readily accept vacancy-generated holes, e.g., magnesium, manganese, nickel, or zinc. Since there are less available sites for holes and the holes are forced to reside on iron cations, the driving force for iron vacancy formation decreases. These results are consistent with an experiment observing a sharp drop in cation vacancy concentration upon alloying iron(II) oxide with manganese.

Environmental Molecular Sciences Laboratory↗

Cation Vacancies Enable Anion Redox in Li Cathodes

Conventional Li-ion battery intercalation cathodes leverage charge compensation that is formally associated with redox on the transition metal. Employing the anions in the charge compensation mechanism, so-called anion redox, can yield higher capacities beyond the traditional limitations of intercalation chemistry. Here, we aim to understand the structural considerations that enable anion oxidation and focus on processes that result in structural changes, such as the formation of persulfide bonds. Using a Li-rich metal sulfide as a model system, we present both first-principles simulations and experimental data that show that cation vacancies are required for anion oxidation. First-principles simulations show that the oxidation of sulfide to persulfide only occurs when a neighboring vacancy is present. To experimentally probe the role of vacancies in anion redox processes, we introduce vacancies into the Li 2 TiS 3 phase while maintaining a high valency of Ti. When the cation sublattice is fully occupied and no vacancies can be formed through transition metal oxidation, the material is electrochemically inert. Upon introduction of vacancies, the material can support high degrees of anion redox, even in the absence of transition metal oxidation. The model system offers fundamental insights to deepen our understanding of structure–property relationships that govern reversible anion redox in sulfides and demonstrates that cation vacancies are required for anion oxidation, in which persulfides are formed.

25 ENERGY STORAGE↗

High Thermoelectric Performance in p-type Polycrystalline Cd-doped SnSe Achieved by a Combination of Cation Vacancies and Localized Lattice Engineering

In this paper, a high figure of merit ( ZT ) of ≈1.7 at 823 K is reported in p-type polycrystalline Cd-doped SnSe by combining cation vacancies and localized-lattice engineering. It is observed that the introduction of Cd atoms in SnSe lattice induce Sn vacancies, which act as p-type dopants. A combination of facile solvothermal synthesis and fast spark plasma sintering technique boosts the Sn vacancy to a high level of ≈2.9%, which results in an optimum hole concentration of ≈2.6 × 10 19 cm -3 and an improved power factor of ≈6.9 µW cm -1 K -2 . Simultaneously, a low thermal conductivity of ≈0.33 W m -1 K -1 is achieved by effective phonon scattering at localized crystal imperfections, as observed by detailed structural characterizations. Density functional theory calculations reveal that the role of Cd atoms in the SnSe lattice is to reduce the formation energy of Sn vacancies, which in turn lower the Fermi level down into the valence bands, generating holes. This work explores the fundamental Cd-doping mechanisms at the nanoscale in a SnSe matrix and demonstrates vacancy and localized-lattice engineering as an effective approach to boosting thermoelectric performance. The work provides an avenue in achieving high-performance thermoelectric properties of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short Range Order in Disordered Spinel and the Impact on Cation Vacancy Transport

Spinels are important complex oxides for use in radiation damage environments and resulting from the corrosion of steels. It is known that, in these environments, normal spinels exist with some concentration of antisite cation pairs known as inversion. In this work we show that even in highly disordered states characterized by high levels of inversion, spinel still shows some short range order (SRO) that manifests itself in antisite chains. The propensity to form these antisite chains is confirmed through Monte Carlo simulations which find that the length of chains which can form depend on the spinel chemistry. We also consider the effect of antisite chains on the diffusivity of cation vacancies and find the effect strongly depends on the spinel chemistry. At the extremes, chains in FeCr2O4 significantly increase vacancy transport but in MgAl2O4 chains have the inverse effect of drastically reducing vacancy mobility. The explanation of these dramatically different effects results from the assessment of the thermodynamic stability of the antisite chains and contrasting attractive/repulsive interactions of vacancies with the chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically dispersed Ag on δ-MnO 2 via cation vacancy trapping for toluene catalytic oxidation

The regulation of metal–support interaction (MSI) and the improvement of noble metal utilization are the frontiers of volatile organic compound (VOC) catalytic oxidation. Here, we report a H 2 O 2 -assisted synthesis process for trapping Ag + onto the engineered Mn vacancies of δ-MnO 2 for the catalytic oxidation of toluene. Due to the strong MSI between Ag and δ-MnO 2 , the monoatomic Ag + anchored on cation vacancies forms longer and weakened Ag–O bonds compared with Ag 2 O, which can extra promote the formation of oxygen vacancies and the activation of adjacent lattice oxygen in Ag–O–Mn units compared with regular nanoparticle counterparts. It is beneficial to the steps of methyl dehydrogenation, demethylation, and benzene ring cleavage. The catalyst yields excellent toluene oxidation activity, enhanced turnover frequency in terms of Ag, and good stability. Finally, we propose in this study a facile design strategy for fabricating stably atomically dispersed metal sites, as well as clarify the structure–activity relationships during toluene catalytic oxidation, especially the important effect of single-atom Ag on the adjacent local structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Correlation in Anion p Orbitals Impedes Ferromagnetism due to Cation Vacancies in Zn Chalcogenides

Electronic correlation effects, usually associated with open d or f shells, have so far been considered in p orbitals only sporadically for the localized 2p states of first-row elements. We demonstrate that the partial band occupation and the metallic band-structure character as predicted by local density calculations for II-VI materials containing cation vacancies is removed when the correct energy splitting between occupied and unoccupied p orbitals is recovered. This transition into a Mott-insulating phase dramatically changes the structural, electronic and magnetic properties along the entire series (ZnO, ZnS, ZnSe, and ZnTe), and impedes ferromagnetism. Thus, important correlation effects due to open p shells exist not only for first-row (2p) elements, but also for much heavier anions like Te (5p).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Embedding Reverse Electron Transfer Between Stably Bare Cu Nanoparticles and Cation‐Vacancy CuWO 4

Cu nanoparticles (NPs) have attracted widespread attention in electronics, energy, and catalysis. However, conventionally synthesized Cu NPs face some challenges such as surface passivation and agglomeration in applications, which impairs their functionalities in the physicochemical properties. Here, the issues above by engineering an embedded interface of stably bare Cu NPs on the cation-vacancy CuWO 4 support is addressed, which induces the strong metal-support interactions and reverse electron transfer. Various atomic-scale analyses directly demonstrate the unique electronic structure of the embedded Cu NPs with negative charge and anion oxygen protective layer, which mitigates the typical degradation pathways such as oxidation in ambient air, high-temperature agglomeration, and CO poisoning adsorption. Kinetics and in situ spectroscopic studies unveil that the embedded electron-enriched Cu NPs follow the typical Eley-Rideal mechanism in CO oxidation, contrasting the Langmuir-Hinshelwood mechanism on the traditional Cu NPs. This mechanistic shift is driven by the Coulombic repulsion in anion oxygen layer, enabling its direct reaction with gaseous CO to form the easily desorbed monodentate carbonate.

Cu nanoparticles↗

Nanolayer of the A{sub 2}{sup III}B{sub 3}{sup VI}(111) phase with ordered cation vacancies on GaAs(111) and InAs(111)

The surface of GaAs(111) and InAs(111) substrates has been investigated by transmission and scanning electron microscopy after thermal treatment in selenium vapor. A pseudomorphic growth of single-crystal phases of indium selenide In{sub 2}Se{sub 3}(111) and gallium selenide Ga{sub 2}Se{sub 3}(111) is found; these compounds are crystallized into a sphalerite lattice with ordered stoichiometric cation vacancies. A model of an atomic surface is proposed for the In{sub 2}Se{sub 3}(111) and Ga{sub 2}Se{sub 3}(111) structures. The reconstruction of the ({radical}3 x {radical}3)-R30 deg. surface of GaAs(111) and InAs(111) after treatment in Se vapor is considered within this model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduction in the concentration of cation vacancies by proper Si-doping in the well layers of high AlN mole fraction Al{sub x}Ga{sub 1–x}N multiple quantum wells grown by metalorganic vapor phase epitaxy

Appropriate-amount Si-doping in the well layers significantly improved the luminescence efficiency of Al{sub 0.68}Ga{sub 0.32}N/Al{sub 0.77}Ga{sub 0.23}N multiple quantum wells. To understand the mechanisms, spatio-time-resolved cathodoluminescence measurements and self-consistent Schrödinger-Poisson calculations were carried out. The increase in the luminescence lifetime at room temperature, which reflects the decrease in the concentration of nonradiative recombination centers (NRCs), was correlated with increased terrace width of Si-doped wells. The results suggest the importance of H{sub 3}SiNH{sub 2} doping-reactant formation that gives rise to enhanced decomposition of NH{sub 3} and provides wetting conditions by surface Si-N bonds, which reduce the total energy and concentration of NRCs composed of cation vacancies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Substitution Rate in TiO 2 Anatase Nanoparticles with Cationic Vacancies for Fast Lithium Storage

Doping is generally used to tune and enhance the properties of metal oxides. However, their chemical composition cannot be readily modified beyond low dopant amounts without disrupting the crystalline atomic structure. In the case of anatase TiO 2 , we introduce a new solution-based chemical route allowing the composition to be significantly modified, substituting the divalent O 2- anions by monovalent F- and OH- anions resulting in the formation of cationic Ti 4+ vacancies (square) whose concentration can be controlled by the reaction temperature. The resulting polyanionic anatase has the general composition Ti 1-x-y square x+y O 2-4(x+y) F 4x (OH) 4y , reaching vacancy concentrations of up to 22%, i.e., Ti 0.78 square 0.22 O 1.12 F 0.4 (OH) 0.48 . Solid-state F-19 NMR spectroscopy reveals that fluoride ions can accommodate up to three different environments, depending on Ti and vacancies (i.e. Ti 3 -F, Ti- 2 square 1 -F, and Ti- 1 square 2 -F), with a preferential location close to vacancies. DFT calculations further confirm the fluoride/vacancy ordering. When its characteristics were evaluated as an electrode for reversible Li-ion storage, the material shows a modified lithium reaction mechanism, which has been rationalized by the occurrence of cationic vacancies acting as additional lithium hosting sites within the anatase framework. Finally, the material shows a fast discharging/charging behavior, compared to TiO 2 , highlighting the benefits of the structural modifications and paving the way for the design of advanced electrode materials, based on a defect mediated mechanism.

25 ENERGY STORAGE↗

Promoting the water dissociation of nickel sulfide electrocatalyst through introducing cationic vacancies for accelerated hydrogen evolution kinetics in alkaline media

Developing cost-effective non-precious electrocatalysts with excellent HER performance in alkaline media is of significance for industrial hydrogen production. Herein, we successfully endow Ni 3 S 2 with unprecedentedly enhanced alkaline HER activities by introducing nickel vacancies. The Ni 3 S 2 catalyst with nickel vacancies exhibits an ultralow overpotential of 35 mV at 10 mA cm –2 in 1 M KOH electrolyte, outperforming commercial Pt/C (56 mV) and most reported non-precious electrocatalysts. The electron paramagnetic resonance and X-ray absorption fine structure etc. validates the formation of Ni vacancies and the change of the geometric/electronic structure of Ni 3 S 2 . Additionally, the theoretical calculations reveal that the Ni sites with higher valence state neighbouring the Ni vacancies can promote the water dissociation, playing a vital role in accelerating HER kinetics in alkaline media. Finally, this work may provide a universal strategy to enhance the HER activity of transition-metal compound catalysts in alkaline media by means of cationic defect engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of depolarization temperature on cation vacancies and lattice distortion for lead-free 74(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-20.8(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-5.2BaTiO{sub 3} ferroelectric ceramics

In this paper, the off-morphotropic-phase-boundary 74(Bi{sub 1/2}Na{sub 1/2})TiO{sub 3}-20.8(Bi{sub 1/2}K{sub 1/2})TiO{sub 3}-5.2BaTiO{sub 3} ceramics were fabricated at different sintering temperatures. It was found out that as the sintering temperature increases, the volatilization of the A-site elements is aggravated, thus generating the oxygen vacancies; meanwhile, the tetragonality of the perovskite lattice reduces gradually. Besides, the temperature-dependent dielectric responses revealed that as the sintering temperature increases, the depolarization temperature T{sub d} decreases while the Curie-Weiss point T{sub C} increases. It is suggested that the lattice distortion, other than the oxygen vacancies, is the crucial factor in influencing the depolarization temperature.

36 MATERIALS SCIENCE↗

Evidence of cation vacancy induced room temperature ferromagnetism in Li-N codoped ZnO thin films

Room temperature ferromagnetism (RTFM) was observed in Li-N codoped ZnO thin films [ZnO:(Li, N)] fabricated by plasma-assisted molecular beam epitaxy, and p-type ZnO:(Li, N) shows the strongest RTFM. Positron annihilation spectroscopy and low temperature photoluminescence measurements indicate that the RTFM in ZnO:(Li, N) is attributed to the defect complex related to V{sub Zn}, such as V{sub Zn} and Li{sub i}-N{sub O}-V{sub Zn} complex, well supported by first-principles calculations. The incorporation of N{sub O} can stabilize and enhance the RTFM of ZnO:(Li, N) by combining with Li{sub i} to form Li{sub i}-N{sub O} complex, which restrains the compensation of Li{sub i} for V{sub Zn} and makes the ZnO:(Li, N) conduct in p-type.

36 MATERIALS SCIENCE↗

Role of A Cation Vacancy in the Exchange-Biased LaFeO{sub 3} Multiferroic Nanocrystals

Multiferroic samples with the chemical formula La{sub 1−x}◻{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.03) were successfully prepared in nanoscale by citrate nitrate combustion method. XRD data reveals crystallized single-phase orthorhombic symmetry for the prepared nanopowder. All measured magnetic parameters point to the antiferromagnetic character with weak ferromagnetic moment. The value of the molar magnetic susceptibility (χ{sub M}) for La{sub 0.99}◻{sub 0.01}FeO{sub 3} reaches 3.5 times that of the undoped sample. The saturation magnetization of the samples La{sub 0.99}◻{sub 0.01}FeO{sub 3} and La{sub 0.97}◻{sub 0.03}FeO{sub 3} increased two times as compared with that of the parent one. The exchange bias (EB) effect was observed for 1{sup st} time at room temperature and originated from antiferromagnetic–ferromagnetic (AFM-FM) interface effect. Ferroelectric hysteresis loop was observed at room temperature for the samples which highlighted the presence of the ferroelectric ordering. A huge enhancement in the saturation (P{sub s}), the remnant polarization (P{sub r}), and the coercive electric field (E{sub c}) of the sample La{sub 0.98}◻{sub 0.02}FeO{sub 3} by 7.5, 24, and 12 times, respectively, when compared with the parent sample LaFeO{sub 3}. Based on the obtained results, the investigated samples are categorized in type I multiferroics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗