Search NASA⌕ Search

SEARCH · Search NASA

Results for “cell design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Cell design for laser-induced breakdown spectroscopy measurements on reactive gas samples

Uranium hexafluoride (UF 6 ) is the primary material used for the enrichment of uranium in the production of light water nuclear reactor fuels worldwide. Accurate, rapid quantification of uranium isotopic composition in nuclear materials is required for safeguards programs and nonproliferation purposes. One potential technique for isotopic measurements in uranium species in the field is laser induced breakdown spectroscopy (LIBS). Safe and effective application of LIBS to UF 6 for enrichment measurements is uniquely challenging due to the chemical and physical properties of UF 6 , which necessitate specific handling procedures. The objective of this work is to design a cell for isotopic analysis of UF 6 that is (1) compatible with chemical and physical properties of UF 6 , (2) compatible with LIBS laser, and (3) portable-sized for nuclear safeguards applications. Along with cell design, initial testing of the cell for basic performance and chemical compatibility is performed. As designed and constructed, the portable gas cell was gas-tight, chemically compatible with UF 6 , and withstood long-duration laser exposure. In this work, the cell has proven capability for handling reactive gasses, such as UF 6 , with specification application to isotopic analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fast-Charging Aging Considerations: Incorporation and Alignment of Cell Design and Material Degradation Pathways

Fast charging of batteries for electric vehicles is seen as one of the most direct ways to enhance adoption. Currently, fast charging is limited by increased cell aging, which is primarily driven by Li plating and degradation of cathode materials. Here, using combined sets of experimental and computational analysis and a suite of different charge protocols, we begin to examine the interplay between failure mode, cell designs, and ultimately aging mechanisms. Slight variation in cell design and the subsequent impacts that charge protocols have on aging can create distinct cell-to-cell variation. As little as 2% difference in porosity change at the cell negative electrode during cycling due to early Li metal plating has been found to alter the aging pathway and either accelerate or inhibit the loss due to Li plating.

25 ENERGY STORAGE↗
DOE OSTI2025

Disentangling the gap between pure and mixed-gas performance of thin film composite membranes through improved cell design and testing methods

Testing thin film composite (TFC) membrane coupons at low stage-cuts (≤5%) in a sweep-gas permeation system is a common practice to obtain mixed-gas separation properties for benchmarking performance and making scale-up decisions. However, even under these idealized conditions, mixed-gas permeance and selectivity can be more than 30% lower than their pure-gas values, partially due to concentration polarization, an effect that typically intensifies with increased membrane permeance. This study investigates the effect of cell design on mixed-gas testing using PolyActive TM TFC membranes with pure-gas CO 2 permeance of 1700 – 3100 gas permeance unit (GPU), covering the permeance range of most state-of-the-art CO 2 /N 2 separation membranes. Here, we designed and 3D-printed a counter-current permeation cell with enhanced feed and sweep flow efficiency, resulting in a 33 – 41% increase in mixed-gas CO 2 permeance compared to traditional permeation cells. Furthermore, we compared sweep-gas and vacuum permeation methods using traditional permeation cells, revealing that the latter delivers 41% higher mixed-gas CO 2 permeance, because vacuuming effectively minimizes the downstream concentration polarization. These findings highlight the importance of cell design and permeation apparatus selection in lab-scale mixed-gas testing, with strong implications for module design and process optimization at the industrial scale.

mixed gas performance↗
DOE OSTI2025

Versatile Cell Design for Molten Fluoride Salt Spectroscopy: Investigating Metal-Ion Speciation in Molten Fluoride Salts

Fluoride-based molten salts are widely used in industrial applications including aluminum production, thermal energy storage, optical crystal growth, and advanced nuclear reactor designs. Despite the wide range of uses, fundamental understandings of coordination chemistry and methods for probing molten fluorides are scarce, likely due to the difficulty of probing fluoride melts with spectroscopic techniques. Performing spectroscopic measurements of fluoride-based salts is challenging due to the highly corrosive nature of these salts, which can degrade many common optical materials. Here, in this work, we present a versatile optical cell design that enables spectroscopic measurements of corrosive melts. This innovative cell design overcomes the challenges posed by the corrosive nature of the salts, allowing for an accurate and consistent spectroscopic analysis. This work reports temperature-dependent absorption measurements for Co 2+ , Ni 2+ , and Cr 3+ analytes in LiF-NaF-KF eutectic salt (i.e., FLiNaK), which are common corrosion products originating from structural alloys in molten-fluoride handling. Absorption spectra were used to understand interactions of these analytes with FLiNaK, particularly ligand field coordination. The analysis of absorption spectra was complemented by structural analyses using ab initio molecular dynamics (AIMD) simulations, providing deeper insights into the behavior of the analytes in FLiNaK. Our findings indicate that the analytes studied in this work exist in octahedral or near-octahedral coordination states that remain stable across the temperature range of 500–600 °C. This work not only highlights an applied solution to performing optical spectroscopy in corrosive, high-temperature melts but also provides important fundamental insight on coordination behavior of transition-metal species in molten fluorides.

Fluoride salt spectroscopy↗
DOE OSTI2022

Lithium ions cell designs with high capacity anode materials and high cell capacities

Improved high energy capacity designs for lithium ion batteries are described that take advantage of the properties of high specific capacity anode active compositions and high specific capacity cathode active compositions. In particular, specific electrode designs provide for achieving very high energy densities. Furthermore, the complex behavior of the active materials is used advantageously in a radical electrode balancing design that significantly reduced wasted electrode capacity in either electrode when cycling under realistic conditions of moderate to high discharge rates and/or over a reduced depth of discharge.

25 ENERGY STORAGE↗
DOE OSTI2023

Assessing an aqueous flow cell designed for in situ crystal growth under X-ray nanotomography and effects of radiolysis products

Nucleation and growth of minerals has broad implications in the geological, environmental and materials sciences. Recent developments in fast X-ray nanotomography have enabled imaging of crystal growth in solutions in situ with a resolution of tens of nanometres, far surpassing optical microscopy. Here, a low-cost, custom-designed aqueous flow cell dedicated to the study of heterogeneous nucleation and growth of minerals in aqueous environments is shown. To gauge the effects of radiation damage from the imaging process on growth reactions, radiation-induced morphological changes of barite crystals (hundreds of nanometres to ∼1 µm) that were pre-deposited on the wall of the flow cell were investigated. Under flowing solution, minor to major crystal dissolution was observed when the tomography scan frequency was increased from every 30 min to every 5 min (with a 1 min scan duration). The production of reactive radicals from X-ray induced water radiolysis and decrease of pH close to the surface of barite are likely responsible for the observed dissolution. The flow cell shown here can possibly be adopted to study a wide range of other chemical reactions in solutions beyond crystal nucleation and growth where the combination of fast flow and fast scan can be used to mitigate the radiation effects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adapted Cell Design for the Operando X‑Ray Absorption Study of a Structurally Evolving Cu Nanoparticle Ensemble during the CO2 Electroconversion to Multicarbon Products

An improved understanding of the materials that will sustain the future of energy production, storage, and delivery calls for better characterization tools. Operando characterization methods have thus become essential for investigating electrocatalytic materials. Without their resulting insights, the study of highly performing catalysts post-mortem cannot viably facilitate the further development of functional catalysts. Herein, we present an operando electrochemical cell designed for hard X-ray absorption spectroscopy (XAS) and specifically adapted to the study of an electrocatalytically active Cu nanoparticle ensemble. So far, this nanocatalyst has proven to pose quite a challenge to characterize due to its unique structural dynamics. Adopting a design comparable to the H-cell employed for all activity testing, we report the satisfactory translation of the active site formation into an XAS-compatible cell. The simultaneous collection of CO2-derived products during XAS characterization enabled the operando characterization of this CO2-reducing active structure. We report a Cu–Cu coordination number of the first scattering path higher than suggested in our previous studies, highlighting the importance of monitoring metastable nanoelectrocatalysts in operando. This study illustrates important caveats for the electrocatalysis community when considering the application of operando XAS. Our results highlight that the sample size, homogeneity, and stability determine how to interpret the measured signal. Considering these parameters carefully, the operando EXAFS results confirm the exceptional undercoordinated character of the Cu nanoparticle ensemble during CO2 reduction to C2+ products.

Louisia, Sheena↗
DOE OSTI2026

Comparing Tandem Cell Designs for Electrochemical CO 2 Reduction to Ethylene

Electrochemical carbon dioxide reduction (CO 2 R) is a promising approach for the decentralized production of fuels such as ethylene (C 2 H 4 ). However, the use of Cu, the most efficient metal CO 2 R catalyst for the generation of C 2 H 4 known to date, generally yields a product stream with poor selectivity. In an effort to increase selectivity, the reaction from CO 2 to C 2 H 4 can be broken down into two steps using tandem CO 2 R electrolyzers: formation of CO from CO 2 and subsequent reduction of CO to C 2 H 4 . Here, in this study, we present two novel tandem electrolyzer architectures that closely integrate two cathodes, one for CO generation and one for conversion to C 2 H 4 , while still enabling independent electrical control of the cathodic surfaces. Cathode segmentation in each of these designs also permits the controlled sequencing of mass flow of chemical intermediates in the order of Au to Cu cathode catalysts, in contrast to earlier work relying on uncontrolled, passive diffusion to facilitate the flow of chemical intermediates between catalysts. When comparing the performance of the newly developed electrolyzer cell designs with a dual electrolyzer system, we found that the dual electrolyzer system yields the highest C 2 H 4 faradaic efficiencies (FEs) of 31% and C 2 H 4 concentrations (∼8 mol %). However, a single Cu-containing electrolyzer outperformed all three tandem systems in terms of C 2 H 4 FE (34%). Our findings, enabled by independent control of the two tandem cathode surfaces, indicate that tandem CO 2 R systems need to be evaluated carefully by testing them at various relevant current densities.

C2H4↗
DOE OSTI2024

A versatile pressure-cell design for studying ultrafast molecular-dynamics in supercritical fluids using coherent multi-pulse x-ray scattering

Supercritical fluids (SCFs) can be found in a variety of environmental and industrial processes. They exhibit an anomalous thermodynamic behavior, which originates from their fluctuating heterogeneous micro-structure. Characterizing the dynamics of these fluids at high temperature and high pressure with nanometer spatial and picosecond temporal resolution has been very challenging. The advent of hard x-ray free electron lasers has enabled the development of novel multi-pulse ultrafast x-ray scattering techniques, such as x-ray photon correlation spectroscopy (XPCS) and x-ray pump x-ray probe (XPXP). These techniques offer new opportunities for resolving the ultrafast microscopic behavior in SCFs at unprecedented spatiotemporal resolution, unraveling the dynamics of their micro-structure. However, harnessing these capabilities requires a bespoke high-pressure and high-temperature sample system that is optimized to maximize signal intensity and address instrument-specific challenges, such as drift in beamline components, x-ray scattering background, and multi-x-ray-beam overlap. We present a pressure cell compatible with a wide range of SCFs with built-in optical access for XPCS and XPXP and discuss critical aspects of the pressure cell design, with a particular focus on the design optimization for XPCS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

A Review on Bioinspired Proton Exchange Membrane Fuel Cell: Design and Materials

With the climate crisis gathering recognition, there has been significant interest in clean energy. As a reliable and clean energy solution, markets transitioning toward sustainable energy have identified polymer electrolyte membrane fuel cells (PEMFCs) as a critical technology. The increasing interest in PEMFCs is primarily due to their high energy density, high efficiency and zero greenhouse gas emission. However, additional development is required to overcome the current barriers associated with fuel cell component design, high manufacturing cost, and insufficient stability. Bioinspired designs have the potential to provide new and valuable insights using novel techniques for extracting design inspirations from biological structures. Applying these design concepts to develop materials and structures for various fuel cell components can be transformative. The well–adapted structures and functional features of biological systems have been proven to greatly enhance the performance of current designs through novel and optimized pathways. Bioinspired designs have indeed lived up to performance expectations and even exceed them. Herein, the potential and value of using these bioinspired designs are discussed. Recent studies and advancements based on nature–inspired structures for components of PEMFCs and how these design considerations substantiate their claim as an attractive alternative to conventional designs are discussed.

25 ENERGY STORAGE↗
DOE OSTI2022

Radiation-Hardened GaN HEMT and Cell Design, Modeling, and Fabrication for Nuclear Instrumentation Applications

Recent advances in nuclear power generation technologies show great promise for efficient, safe generation of carbon-free power in the near future. Consequently, many new generation reactor designs are being pursued by government and industry groups, including both fission- and fusion-based technologies. Radiation- and temperature-tolerant sensor technology continues to advance, yet development of the electronics/instrumentation technologies suitable for these environments have fallen behind. Industry has adequately addressed harsh environment electronics needs for low earth orbit satellites, but the much more extreme conditions associated with electronics placed near or in a reactor core remain unaddressed. This project investigates the use of gallium nitride (GaN) circuit technology to address the unique needs for sensor interface electronics and communications in reactor environments. This report provides a summary of the first year’s project activities related to developing and optimizing devices and circuits for this GaN high electronic mobility transistor (HEMT) process. Activities reported include multiple analog and digital circuit designs simulated using custom Verilog-A models generated from measured GaN devices fabricated in the target process. Digital circuit designs included fundamental logic circuits such as an inverter, NAND, NOR, AND and OR gates, as well as a 5-stage ring oscillator. Each design was simulated using an open-source SPICE simulator, and an integrated circuit layout was produced of each design for use in future fabrication. Analog circuit designs focused on the fundamental building blocks to be used to construct sensor interface and communications circuits. These included current mirrors, matched differential pairs, and a Gilbert cell mixer design, each with an associated integrated circuit layout. Layout tools used for these designs included two open-source packages—KLayout and Magic—which were customized for specific use with the OSU GaN process layers. Design rules and preliminary device extraction capabilities were built for the Magic tool to enable device extraction and subsequent netlist generation for SPICE simulation. Finally, future research directions for year two are summarized. When the year-two directions are implemented, the project will be in position to advance the state of the art in electronics for near- or in-reactor sensor interfacing and communications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Spin resonance canceling lattice cell design principles

We show how to construct an accelerator lattice cell which minimizes all intrinsic spin resonance. We then apply this approach to various toy electron and proton accelerators, considering, AGS-like and CEPC/FCC-ee and FCC-hh like rings.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Lightweight Solid Oxide Cell Design for Ammonia-fed SOFC Systems

A lightweight solid oxide fuel cell (SOFC) was developed by OxEon Energy that demonstrates the potential for increased specific power (kW/g) suitable for the requirements of electric Vertical Take-off and Landing (eVTOL) applications. Fuel flexibility was demonstrated in button cells and stacks using both legacy electrolyte-supported SOFC structure and the lightweight structure. Button cell and stack performance was nearly identical among hydrogen, ammonia, and reformed natural gas. Durability testing shows similarly stable performance in each fuel. A button cell test in ammonia at 800 °C using the lightweight cell structure measured area specific resistance (ASR) of 0.25 Ω-cm2 in H2/N2 and NH3 fuel feeds and showed a peak power density of 0.98 W/ cm2 in NH3 fuel. Short term hold at 0.7 V showed stable performance.

Pike, Jenna↗
DOE OSTI2024

Topology optimization for the full-cell design of porous electrodes in electrochemical energy storage devices

In this paper, we introduce a density-based topology optimization framework to design porous electrodes for maximum energy storage. We simulate the full cell with a model that incorporates electronic potential, ionic potential, and electrolyte concentration. The system consists of three materials, namely pure liquid electrolyte and the porous solids of the anode and cathode, for which we determine the optimal placement. We use separate electronic potentials to model each electrode, which allows interdigitated designs. As a result, a penalization is required to ensure that the anode and cathode do not touch, i.e., causing a short circuit. We compare multiple 2D designs generated for different fixed conditions, e.g. material properties. A 3D design with complex channel and interlocked structure is also created. All optimized designs are far superior to the traditional monolithic electrode design with respect to energy storage metrics. We observe up to a 750% increase in energy storage for cases with slow effective ionic diffusion within the porous electrode.

25 ENERGY STORAGE↗
DOE OSTI2020

Inverted Metamorphic AlGaInAs/GaInAs Tandem Thermophotovoltaic Cell Designed for Thermal Energy Grid Storage Application

We demonstrate an inverted metamorphic multijunction (IMM) photovoltaic cell comprising lattice-mismatched 1.2 eV AlGaInAs and 1.0 eV GaInAs junctions optimized for high-temperature thermophotovoltaic (TPV) applications. This device differs from traditional IMM solar cells because the mismatched junctions are grown at a single lattice constant. This architecture enables removal of the compositionally graded buffer that otherwise filters light from the junctions below and absorbs sub-bandgap light via free-carrier absorption. Sub-bandgap absorption dramatically reduces the efficiency of TPV systems using high reflectivity cells to enable band edge spectrum filtering. Three components required development to enable this device: (1) a lattice-mismatched 1.2 eV AlGaInAs junction, (2) a metamorphic contact layer grown after the graded buffer, and (3) a transparent tunnel junction that sits in front of the 1.0 eV GaInAs junction. Growth conditions that minimize oxygen defect incorporation maximize AlGaInAs cell quality, enabling a 0.41 V bandgap open circuit voltage offset at 22 mA/cm2 under AM1.5D. A mismatched GaInAs:Se layer is developed as a low resistance contact. Lastly, we develop a GaAsSb:C/GaInP:Se tunnel junction suitable for high-power densities with more transparency than the GaAsSb:C/GaInAs:Se structure used in past IMM cells. We characterize the tandem device under a high-intensity spectrum that approximates the emission from a 2150°C blackbody radiator and deduce a projected ideal TPV efficiency of 39.9% at ~30% of the blackbody irradiance and 36% ideal TPV efficiency under the full 118 W/cm2 irradiance. Improvements to the back-surface reflectivity and series resistance are expected to increase the ideal TPV efficiency well above 40%.

25 ENERGY STORAGE↗