Molecular Modeling and Imaging of Initial Stages of Cellulose Fibril Assembly: Evidence for a Disordered Intermediate Stage
Explore the source record for details and available documents.
biofuels (including algae and biomass), bio-inspir↗
SEARCH · Search NASA
Results for “cellulose fibrils”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Coarse-grain model for natural cellulose fibrils in explicit water
Understanding biomass structure and dynamics on multiple time and length scales is important for the development of cellulosic biofuels. To this aim, we have developed a coarse-grain (CG) model for molecular dynamics (MD) simulations of cellulose fibrils in explicit water based on target observables from fully atomistic simulations. This model examines the significance of the presence of explicit solvent and compares results with the previous, implicit solvent CG cellulose models. The present, constraint-free CG model is used to generate a series of noncrystalline fibril structures using a coupling parameter, λ, between fully crystalline and fully amorphous potentials. By exploring various structural parameters, including the root-mean-square deviation, root-mean-square fluctuations, radius of gyration, and persistence length, we find the crystalline-to-amorphous state transition takes place at λ ≈ 0.386. The persistence length of cellulose fibril in the transition region corresponds to that of native cellulose fibrils. The transition between crystalline and amorphous fibrils occurs at larger values of λ in explicit water than in the implicit case. Detailed analysis of individual energetic contribution to the transition reveals that the nonbonded interactions, in particular, that of cellulose water interaction, plays a significant role in the observed crystalline to amorphous transition of cellulose fibril. The present study thus highlights the importance of solvent presence that cannot be adequately described with the previous implicit solvent model. In conclusion, the present method provides an accurate and constraint-free approach for deriving a variety of structures of cellulose in water, with a wide range of crystallinity, suitable for incorporation into large-scale models of lignocellulosic biomass.
09 BIOMASS FUELS↗
Engineering and characterization of carbohydrate‐binding modules for imaging cellulose fibrils biosynthesis in plant protoplasts
Abstract Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM‐polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM‐based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type‐A CBMs from families 3a and 64 with crystalline cellulose‐I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose‐I using equilibrium binding assays. To compute the adsorption ( nk on ) and desorption ( k off ) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide‐field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts.
09 BIOMASS FUELS↗
Diffraction pattern simulation of cellulose fibrils using distributed and quantized pair distances
Intensity simulation of X-ray scattering from large twisted cellulose molecular fibrils is important in understanding the impact of chemical or physical treatments on structural properties such as twisting or coiling. This paper describes a highly efficient method for the simulation of X-ray diffraction patterns from complex fibrils using atom-type-specific pair-distance quantization. Pair distances are sorted into arrays which are labelled by atom type. Histograms of pair distances in each array are computed and binned and the resulting population distributions are used to represent the whole pair-distance data set. These quantized pair-distance arrays are used with a modified and vectorized Debye formula to simulate diffraction patterns. This approach utilizes fewer pair distances in each iteration, and atomic scattering factors are moved outside the iteration since the arrays are labelled by atom type. As a result, this algorithm significantly reduces the computation time while maintaining the accuracy of diffraction pattern simulation, making possible the simulation of diffraction patterns from large twisted fibrils in a relatively short period of time, as is required for model testing and refinement.
09 BIOMASS FUELS↗
Mineral-Ground Micro-Fibrillated Cellulose Reinforcement for Polymer Compounds
Additive Manufacturing (AM) is quickly becoming a mainstream, energy efficient manufacturing technique for complex and custom components. ORNL has taken polymer AM into the next level with Big Area Additive Manufacturing (BAAM). However, we need to develop the strength of AM materials (specifically polymers) to satisfy the mechanical requirements of structural parts. Also, it is crucial that the developed process can easily be scaled up to have a significant impact in the manufacturing industry of US. Furthermore, renewable, bio-derived AM materials are desirable from a sustainability perspective. In the first phase of this project the mechanical properties of polymer AM components were significantly improved developing a micro fibrillated cellulose (MFC)-reinforced composite material system that is derived from biomass and compatible with BAAM. Unfortunately, the improvements were observed only with freeze-dried MFCs, and freeze-drying is a very slow process and is not industrially scalable. Furthermore, MFCs were not available in large quantities at low cost. However, FiberLean has reached 12,000 tons/year capacity (60,000 tons/year including the minerals). FiberLean offers MFCs at a scale and order of magnitude lower price than current market participants. With their recently developed novel (patent pending) drying process FiberLean can achieve over 50% solid content commercially. In the 2nd phase of the project, the original objective was to investigate this new novel drying process along with compounding with different formulations to optimize and adapt to large scale additive manufacturing. However, the compounded materials prepared via this approach were very brittle and demonstrated poor mechanical performance. Therefore, the project was focused more on a scalable chemical surface modification of MFCs to enable their drying via conventional oven process with minimal agglomeration and better dispersion in PLA polymer matrix. Fiberlean and ORNL have worked together in this project to develop mineral-ground microfibrillated cellulose (MFC) - reinforced additive manufacturing feedstock materials with significantly improved mechanical properties. Properly surface modified and dried Fiberlean cellulose microfibrils led to tensile strength increases up to ~40% and elastic modulus increases up to 70% with the addition of 30% MFC into PLA matrix. The work has led to a high impact journal article and a provisional patent. Opportunities for a follow up work to demonstrate the technology in large scale and application of it to AM applications are currently being searched.
36 MATERIALS SCIENCE↗
Size, Shape, and Arrangement of Native Cellulose Fibrils in Maize Cell Walls
Abstract not provided
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mineral-Ground Micro-Fibrillated Cellulose Reinforcement for Polymer Compounds
ORNL worked with Imerys to demonstrate reinforcement of additive manufacturing feedstock materials using mineral-ground microfibrillated cellulose (MFC). Properly prepared/dried mineral-ground cellulose microfibrils significantly improved mechanical properties of both ABS and PLA resins. While tensile strength increases up to ~40% were observed, elastic modulus of the both resins doubled with the addition of 30% MFC.
36 MATERIALS SCIENCE↗
The impact of alterations in lignin deposition on cellulose organization of the plant cell wall
Not Available
59 BASIC BIOLOGICAL SCIENCES↗
REACH coarse-grained simulation of a cellulose fiber
A molecular level understanding of the structure, dynamics and mechanics of cellulose fibers can aid in understanding the recalcitrance of biomass to hydrolysis in cellulosic biofuel production. Here, a residue-scale REACH (Realistic Extension Algorithm via Covariance Hessian) coarse-grained force field was derived from all-atom molecular dynamics (MD) simulations of the crystalline Iβ cellulose fibril. REACH maps the atomistic covariance matrix onto coarse-grained elastic force constants. The REACH force field was found to reproduce the positional fluctuations and low-frequency vibrational spectra from the all-atom model, allowing elastic properties of the cellulose fibril to be characterized using the coarse-grained force field with a speedup of >20 relative to atomistic MD on systems of the same size. The calculated longitudinal/transversal Young s modulus and the velocity of sound are in agreement with experiment. The persistence length of a 36-chain cellulose microcrystal was estimated to be ~380 μm. In conclusion, the normal-mode analysis with the REACH force field suggests that intrinsic dynamics might facilitate the deconstruction of the cellulose fibril from the hydrophobic surface.
59 BASIC BIOLOGICAL SCIENCES↗
Tailoring biogenic straw insulation from additive manufacturing
In the pursuit of carbon-storing materials that could help accomplish high levels of building sustainability, wheat straw has emerged as a promising alternative to fossil fuel-based building materials. Straw is 100% biodegradable and abundant agricultural waste used in the construction 400 years ago, and it has been reported to have the lowest embodied carbon when measured against other typical insulating materials. Here, in this study, we report additive manufacturing of carbon-sequestration insulation panel materials by upcycling cellulose fibrils from wheat straw. Cellulose obtained from alkaline and 2,2,6,6-tetramethylpiperidine-1-oxyl radical-mediated oxidation shows thermal conductivity of 0.036 W m -1 K -1 , alongside elastic and flexural modulus of 900 MPa and 502 MPa, respectively. In addition, an in-situ hydrophobic treatment in the cellulose-based insulation panels is achieved with an average water contact angle of 133.7° Furthermore, the extrusion-based additive manufacturing of a 3D-printable ink obtained by mixing the cellulose and silica aerogel precursor is accomplished, with the printed material exhibiting structural integrity, thus showing great potential towards the development of state-of-the-art, sustainable materials for carbon-sequestration building applications.
36 MATERIALS SCIENCE↗
Time-resolved tracking of cellulose biosynthesis and assembly during cell wall regeneration in live Arabidopsis protoplasts
Cellulose, the most abundant polysaccharide on earth composing plant cell walls, is synthesized by coordinated action of multiple enzymes in cellulose synthase complexes embedded within the plasma membrane. Multiple chains of cellulose fibrils form intertwined extracellular matrix networks. It remains largely unknown how newly synthesized cellulose is assembled into an intricate fibril network on cell surfaces. Here, we have established an in vivo time-resolved imaging platform to continuously visualize cellulose biosynthesis and fibril network assembly onArabidopsis thalianaprotoplast surfaces as the primary cell wall regenerates. Our observations provide the basis for a model of cellulose fibril network development in protoplasts driven by an interplay of multiscale dynamics that includes rapid diffusion and coalescence of nascent cellulose fibrils, processive elongation of single fibrils, and cellulose fibrillar network rearrangement during maturation. This study provides fresh insights into the dynamic and mechanistic aspects of cell wall synthesis at the single-cell level.
Science & Technology - Other Topics↗
Anisotropic Motions of Fibrils Dictated by Their Orientations in the Lamella: A Coarse-Grained Model of a Plant Cell Wall
Plant cell walls are complex systems that exhibit the characteristics of both rigid and soft material depending on their external perturbations. The three main polymeric components in a plant primary cell wall are cellulose fibrils, hemicellulose, and pectins. These components interact in a hierarchical fashion giving rise to mesoscale structural features such as cellulose bundles, lamella stacking, and so on. Although several studies have focused on understanding these unique structural features, a clear picture linking them to cell wall mechanics is still lacking. As a first step toward this goal, a phenomenological model of plant cell wall has been developed in this work by using available experimental data to investigate the underlying connections between mesoscale structural features and the motions of fibrils during deformation. In this model cellulose fibrils exhibit motions such as angular reorientations and kinking upon forced stretching. Furthermore, these motions are dependent on the orientation of fibrils with respect to the stretch direction, i.e., fibrils that are at an angle to the stretch direction exhibit predominant angular reorientations, while fibrils transverse to the stretch direction undergo kinking as a result of transverse compression. Varying the chain length of pectin had negligible effects on these motions. One of the main contributions from this work is the development of a simple model that can be easily fine-tuned to test other hypotheses and extended to include additional experimental knowledge about the structural aspects of cell walls in the future.
36 MATERIALS SCIENCE↗
Comparison of unique effects of two contrasting types of cellulose nanomaterials on setting time, rheology, and compressive strength of cement paste
Not Available
Nassiri, Somayeh (ORCID:0000000153672167)↗
Determination of cellulose crystallinity from powder diffraction diagrams: Powder Diffraction Diagrams
Commonly one-dimensional (1D) (spherically averaged) powder diffraction diagrams are used to determine the degree of cellulose crystallinity in biomass samples. Here, it is shown using molecular modeling how disorder in cellulose fibrils can lead to considerable uncertainty in conclusions drawn concerning crystallinity based on 1D powder diffraction data alone. For example, cellulose microfibrils that contain both crystalline and noncrystalline segments can lead to powder diffraction diagrams lacking identifiable peaks, while microfibrils without any crystalline segments can lead to such peaks. Moreover, this leads to false positives, that is, assigning disordered cellulose as crystalline, and false negatives, that is, categorizing fibrils with crystalline segments as amorphous. Finally, the reliable determination of the fraction of crystallinity in any given biomass sample will require a more sophisticated approach combining detailed experiment and simulation.
36 MATERIALS SCIENCE↗
Surface-Modified Cellulose Nanofibers-graft-poly(lactic acid)s Made by Ring-Opening Polymerization of L-Lactide
Highly crystalline cellulose nanofibers with a high density of carboxylate groups only on the surfaces were prepared from both softwood and non-wood cellulose pulp. The preparation method used 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of native cellulose fibrils in an aqueous TEMPO/NaBr/NaClO system and subsequent postoxidation with NaClO{sub 2} in acetate buffer (pH 4.8). The TEMPO-oxidized cellulose nanofibers (TOCNs) possessed a carboxylate content of 1.7 mmol g{sup −1} and a crystallinity of 67–69% with a crystallite size of ∼3 nm. The TOCNs were used to produce highly crystalline TOCN-graft-poly(lactic acid) (PLA) nanocomposites via ring-opening polymerization of L-lactide in a polar aprotic solvent. Effects of the reaction temperature and the molar ratio of L-lactide to carboxylate surface groups, on the efficiency of surface grafting were investigated to potentially improve the crystallinity and thermal properties of the nanocomposites. The crystallinity of TOCN-g-PLA products was 59–66% greater than the crystallinity of neat PLA.
36 MATERIALS SCIENCE↗
Structure/function relationships in the rosette cellulose synthesis complex illuminated by an evolutionary perspective
Cellulose microfibrils are a key component of plant cell walls, which in turn compose most of our renewable biomaterials. Consequently, there is considerable interest in understanding how cellulose microfibrils are made in living cells by the plant cellulose synthesis complex (CSC). This remarkable multi-subunit complex contains cellulose synthase (CESA) proteins, and it is often called a rosette due to its six-lobed shape. Each CSC moves within the plasma membrane as it spins a strong cellulose microfibril in its wake. To accomplish this biological manufacturing process, the CESAs harvest an activated sugar substrate from the cytoplasm for use in the polymerization of glucan chains. An elongating glucan is simultaneously translocated across the plasma membrane by each CESA, where the group of chains emanating from one CSC co-crystallizes into a cellulose microfibril that becomes part of the assembling cell wall. Here we review major advances in understanding CESA and CSC structure/function relationships since 2013, when ground-breaking insights about the structure of cellulose synthases in bacteria and plants were published. We additionally discuss: (a) the relationship of CSC substructure to the size of the fundamental cellulose fibril; (b) an evolutionary perspective on the driving force behind the existence of hetero-oligomeric CSCs that currently appear to dominate in land plants; and (c) how cellulose properties may be regulated by CESA and CSC activity. Finally, we also pose major questions that still remain in this rapidly changing and exciting research field.
59 BASIC BIOLOGICAL SCIENCES↗
Fabrication of lignocellulosic biomass paper containing nanofibrillated biomass
Fibrillated cellulose has been frequently used for making nanopapers and thin films. However, limited work has been carried out in the construction of such materials using native lignocellulosic biomass. Making papers from fibrillated biomass allows complete utilization of whole plant material and may reduce chemical and energy consumption. Ultra-friction grinding was used to directly fibrillate knife-milled poplar into micro- to nano-sized biomass fibers. Papers were made using the fibrillated biomass containing nanofibrillated biomass and their mechanical properties were tested. Biomass papers made via press-drying had higher tensile strength than papers made by air-drying. A higher press-drying temperature of 180 °C produced stronger papers than at 150 °C. Guar gum substantially increased the strength of the press-dried papers in comparison to cationic starch. Press-drying increased the thermogravimetric peak decomposition temperature by 13 °C in comparison to air-drying.
59 BASIC BIOLOGICAL SCIENCES↗