The effects of surface and particle properties on adhesion in humid environments using the enhanced centrifuge method
Not Available
Stevenson, Caralyn A.↗
SEARCH · Search NASA
Results for “centrifuge method”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Characterizing the Effect of Particle Properties and Surface Topography Towards Overall Powder Adhesion Through the Enhanced Centrifuge Method.
Abstract not provided.
Stevenson, Caralyn↗
A simple centrifuge cell method for ex situ quantification of electrical conductivity of slurry electrode materials
We present the design, experimental procedure, and experimental evaluation of a system for fast, simple, and ex situ characterization of electrical conductivity of slurry electrode materials. The system uses a custom-designed electrochemical cell compatible with centrifugation in a swing-bucket centrifuge. The cell features cylindrical graphite electrodes that are partially sheathed so as to expose only 2 mm of the electrode surface to the bottom region of the packed particulate pellet. Also presented is a conduction model that provides a shape factor for estimating effective conductivity. We tested aqueous solutions of carbon black (CB), activated carbon (AC), and mixtures thereof. These particles were dispersed in 0.0 and 0.5 M NaCl solutions. Measurements show that the effective conductivity initially increases linearly with pellet mass and then saturates at higher masses. Notably, CB exhibited a fivefold increase in conductivity than AC at equal pellet masses. CB/AC mixtures at a fixed pellet mass were tested with CB mass fractions of 0 to 100%. Interestingly, the mixture conductivity was found to be a non-monotonic function of CB mass fraction, with a maximum conductivity at about 60 % CB mass fraction. At this maximum, the mixture conductivity is approximately 30 % higher than pure CB. NaCl concentration in the slurry solution had no effects on conductivity. These results highlight the interactions between slurry electrode composition and compaction, offering insights for optimizing slurry electrodes. Furthermore, the system and results may also be applicable to evaluation of particulate materials (including slurries) used for Li-ion batteries, capacitive deionization, fuel cells, and flow electrodes.
Capacitive deionization↗
Vibration isolation for centrifuge testbeds
A method for isolating vibrations for centrifuge testing devices is provided. The method comprises coupling a test payload platform to a number of piezoelectric actuators and coupling the piezoelectric actuators to a reaction mass coupled to a centrifuge arm. A layer of vibration-absorbing material is sandwiched between the reaction mass and the centrifuge arm. The centrifuge arm is rotated around an axis, and the test payload platform is vibrated with the piezoelectric actuators as the centrifuge rotates, wherein the layer of vibration-absorbing material prevents vibrations from traveling down the centrifuge arm.
Siler, David Michael↗
Synthesis and characterization of polylactic acid microspheres via emulsion-based processing
Polylactic acid (PLA) microspheres are primarily used in drug delivery applications and rarely manufactured commercially. In encapsulation, the drug encapsulation and microsphere synthesis process happen simultaneously. Simultaneous synthesis necessitates conditions that ensure the drugs to be encapsulated remain viable in the synthesis process. Here, in the present work, solid pure PLA microspheres are prepared using a repeatable centrifugal mixing method to create a single emulsion system. A planetary thinky mixer is used to achieve centrifugal mixing. PLA acts as the dispersed phase of the emulsion, whereas Polyvinyl alcohol (emulsifier) dissolved in deionized water serves as the bulk phase. The emulsions are stirred for about 4 min at 2000 rpm. Microspheres prepared by mechanical mixing are compared with microspheres prepared by centrifugal mixing. The microspheres prepared by centrifugal mixing proved to be narrower and closer to a normal distribution with a mean size (D x 50) of 30 microns. The size distribution of planetary mixed microspheres did not change from one batch to another.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Oxidative Catalytic Fractionation of Lignocellulosic Biomass Using a Co-N-P-C Catalyst and One-Step Isolation of Aromatic Monomers via Centrifugal Partition Chromatography
Methods for catalytic fractionation of biomass provide a means to convert lignin directly into monomers while generating a high-quality cellulosic stream, contrasting conventional biomass pretreatment strategies that prioritize the cellulosic fraction. Here, a nonprecious-metal Co-N-P-C catalyst is identified for aerobic oxidative catalytic fractionation (OCF) of poplar feedstock in dimethyl carbonate that achieves significantly higher yields of aromatic monomers (24 wt %) relative to those obtained with a recently reported Co-N-C catalyst in acetone solvent (15 wt %). Mechanistic studies indicate that the acidic properties of the catalyst contribute to its improved performance by promoting extraction of lignin from insoluble polysaccharides. This OCF process is complemented by the development of a new centrifugal partition chromatography (CPC) method that supports isolation of all five major aromatic monomers (syringic acid, syringaldehyde, vanillic acid, vanillin, and para-hydroxybenzoic acid) in a single liquid–liquid extraction purification step. Furthermore, this OCF/CPC sequence has important implications for future lignin valorization efforts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Synthesis and characteristics of porous ceramic tubes: a comparison of centrifugal casting and cold isostatic pressing methods
Short porous ceramic tubes in small quantities are needed for membrane-related research and development efforts and can be synthesized by centrifugal casting (CC) or cold isostatic pressing (CIP) methods. Here, this work evaluates the characteristics of porous ceramic tubes prepared by both methods and provides a strategy for selecting the proper method for ceramic tube fabrication, depending on its application. Samarium-doped ceria (SDC) with an average crystallite size of 10 nm was synthesized by a citrate method and used to make porous SDC tubes by the CC and CIP methods under different conditions. Porous SDC tubes were prepared from an aqueous suspension of the SDC powder with polyvinyl alcohol (PVA) using a cylindrical metallic mold, centrifugated at 4000–6000 rpm, followed by sintering in 1200–1500 °C. SDC tubes were also made by the CIP method from the SDC powder placed inside a cylindrical rubber bag followed by isostatic compression at 1379 bar. The pore structure of the SDC tubes was characterized by helium permeation and liquid nitrogen Archimedes method. Due to high compression pressure giving a low porosity green tube, the CIP method with lower sintering temperature produces SDC tubes with much lower porosity and average pore size and similar tortuosity compared to the CC methods. The CIP method should be used to prepare low porosity or dense ceramic tubes, and the CC method should be used for preparing high-porosity ceramic tubes or tubes with pore gradient tube wall.
36 MATERIALS SCIENCE↗
Linking stem rehydration kinetics to hydraulic traits using a novel method and mechanistic model
Background: Despite the recognized importance of hydraulic capacitance as a mechanism used by plants to maintain hydraulic functioning during high transpiration, characterizing the dynamics of capacitance remains a challenge. Methods: For this work, we used a novel ‘two-balance method’ to investigate relationships between stem rehydration kinetics and other hydraulic traits in multiple tree species, and we developed a model to explore stem rehydration kinetics further. Key Results: We found that: (1) rehydration time constants and the amount of water uptake occurring during rehydration differed significantly across species; (2) time constants did not change with declining water potential (Ψ), while water uptake increased at lower Ψ in some species; (3) longer time constants were associated with lower wood density, higher capacitance and less negative stem pressures causing 50 % loss of hydraulic conductivity (P 50 ); (4) greater water uptake occurred in stems with lower wood density and less negative P 50 values; and (5) the model could estimate the total hydraulic resistance of the rehydration path, which cannot be measured directly. Conclusions: Overall, the two-balance method can be used to examine rehydration dynamics quickly and thoroughly in detached woody stems. This method has the potential to improve our understanding of how capacitance functions across tree species, which is an often-overlooked component of whole-plant hydraulics.
54 ENVIRONMENTAL SCIENCES↗
Rheo–Electric Foundations and Engineering of Carbon Slurry Flow Electrodes
Flowable carbon slurry electrodes promise continuous, scalable electrochemical desalination and energy storage when their rheology (flow and stability) and electronic connectivity are jointly optimized. This report integrates six complementary thrusts that we executed under the Laboratory Directed Research and Development (LDRD) project: (i) a fast, ex situ, centrifuge-compatible method to quantify pellet (packed slurry) electronic conductivity, with a validated cell constant (“shape factor”) and quantitative structure–property insights for carbon mixtures; (ii) a controlled circulation study showing that peristaltic pumping can irreversibly alter particle size and morphology over laboratory-relevant durations; (iii) development of a miniature jet pump that preserves particle integrity while achieving entrainment ratios of 2–4 at practical flow rates; (iv) a comprehensive mapping of how a representative non-ionic surfactant (Tween 20) collapses the carbon gel network, separating network-percolation losses from intrinsic particle contact resistance; (v) in-situ visualization revealing how gravitational settling and flow-driven mixing compete to control charge transport, with dynamic bed layers preventing saturation while achieving 30-fold local concentration enhancement; and (vi) a simple, widely adoptable fabrication route to structured, gas-nitrided titanium nitride (TiN) titanium current collectors that dramatically lower interfacial losses and enable geometry-driven performance gains. Together, these results provide a coherent toolchain and design rules to accelerate formulation screening, de-risk device prototyping, and standardize characterization for carbon slurry electrodes in flow-electrode capacitive deionization (FCDI), electrochemical flow capacitor (EFC), and related systems.
25 ENERGY STORAGE↗
First report of barley root-knot nematode, Meloidogyne naasi from turfgrass in Idaho, with multigene molecular characterization
Barley root-knot nematode, Meloidogyne naasi Franklin, 1965, is one of the most important pest nematodes infecting monocots (Franklin, 1965). Two-inch core soil samples collected from a golf course in Ada County, Idaho were submitted for identification in November of 2019. A high number of Meloidogyne sp. juveniles were recovered from both soil samples using sieving and decantation followed by the sugar centrifugal flotation method. They were examined by light microscopy, morphometric measurements, and multiple molecular markers, including the ribosomal 28S D2–D3 and intergenic spacer 2 (IGS-2) regions, mitochondrial markers cytochrome oxidase I (COI) and the interval from COII to 16S, and the protein-coding gene Hsp90. Morphometrics as well as BlastN comparisons with other root-knot nematode sequences from GenBank were consistent with identification as M. naasi. Phylogenetic trees inferred from 28S, IGS-2, COI, or Hsp90 alignments each separated the Idaho population into a strongly supported clade with other populations of M. naasi, while the COII-16S interval could not resolve M. naasi from M. minor. This report represents the first morphological and molecular characterization of Meloidogyne naasi from turfgrass in Idaho.
59 BASIC BIOLOGICAL SCIENCES↗
Volatile Fatty Acid Recovery from Arrested Anaerobic Digestion for the Production of Sustainable Aviation Fuel: A Review
The process of producing sustainable aviation fuel (SAF) from organic waste involves the use of volatile fatty acids (VFAs) as intermediates that are obtained via arrested anaerobic digestion (AAD) and VFA recovery. This recovery process often requires several steps, including dewatering, filtration, extraction, and purification. The recovery of VFAs is crucial for their upgrading and can pose a challenge in the production of SAF from organic waste due to high costs and compatibility issues. This review discusses various dewatering methods, including centrifuges, belt filter presses, and screw presses, and explores conditioning technologies that can improve dewatering performance. It also introduces filtration technologies, with a focus on dynamic filtration, which shows promise in addressing the issue of membrane fouling. Additionally, the review describes extraction technologies such as electrodialysis, adsorption, and liquid–liquid extraction (LLE). By providing insights into these different techniques, the review aims to contribute to the development of an integrated VFA recovery process with low carbon footprint.
09 BIOMASS FUELS↗
Liquid solution centrifugation for safe, scalable, and efficient isotope separation
A general method of separating isotopes by centrifuging dissolved chemical compounds in a liquid is introduced. This technique can be applied to almost all elements and leads to large separation factors. The method has been demonstrated in several isotopic systems including Ca, Mo, O, and Li with single-stage selectivities of 1.046 to 1.067 per neutron mass difference (e.g., 1.43 in 40 Ca/ 48 Ca), which are beyond the capabilities of various conventional methods. Equations are derived to model the process, and the results agree with those of the experiments. The scalability of the technique has been demonstrated by a three-stage enrichment of 48 Ca with a total 40 Ca/ 48 Ca selectivity of 2.43, and the scalability is more broadly supported through analogies to gas centrifuge, whereby countercurrent centrifugation can further multiply the separation factor by 5 to 10 times per stage in a continuous process. Optimal centrifuge conditions and solutions can achieve both high-throughput and highly efficient isotope separation.
07 ISOTOPE AND RADIATION SOURCES↗
Bio-Inspired Ceramic?Metal Composites Using Ceramic 3D Printing and Centrifugal Infiltration
Explore the source record for details and available documents.
Khan, Shahbaz Mahmood↗
Variable-Speed Pump Efficiency Calculation For Fluid Flow Systems with and without Static Head
To accurately calculate pump energy savings gained from implementing variable frequency drive (VFD) controls, the variation of pump efficiency must be considered when operating conditions transition from the design operating point to new operating points. Many software tools require users to specify the new pump efficiency, or it is assumed to be unchanged. Unfortunately, many users have challenges of estimating the pump efficiency at new operating points. This paper presents a simplified method of estimating centrifugal pump efficiency at new operating speeds when the pump is controlled by a VFD. This methodology applies to systems with and without static head when the system curve is not affected by the change, and also systems where the change in operation changes the system curve.A hypothetical fluid flow system and centrifugal pump were used to demonstrate the calculation process for these scenarios. For this hypothetical system, the pump’s efficiency at new operating points was up to 5.4% lower than the design operating point.
42 ENGINEERING↗
Method of construction for internally cooled diaphragms for centrifugal compressor
An internally-cooled compressor is provided including a casing and a diaphragm disposed in the casing. The diaphragm includes a diaphragm box defining a plurality of box channels and a bulb defining a plurality of bulb channels. A plurality of return channel vanes connect the diaphragm box and bulb in fluid communication, such that each return channel vane defines a plurality of return vane conduits coupled in fluid communication with the plurality of box channels and the plurality of bulb channels thereby forming a section of a cooling pathway. The cooling pathway is configured such that a cooling agent introduced from an external coolant source into the diaphragm box and flowing through a box channel flows through a return vane conduit into and through a bulb channel and back through another return vane conduit into another box channel before flowing back to the external coolant source.
42 ENGINEERING↗
Methods of separating materials by use of a centrifugal contactor
Centrifugal contactors that can be used for mixing or separating materials are described. The contactors include a sensing system including a communications fiber within the shaft of the contactors and access ports providing access from the communications fiber to the mixing/separating zone of the contactor. The sensing system can be utilized during operation of the contactor and can provide for detailed and accurate on-line characterization of a protocol, as well as process control and system modification as necessary during operation.
Restivo, Michael L.↗
Liquid centrifugation-based isotope separation of 7 Li, 37 Cl and D
Liquid centrifugation is an emerging method to separate isotopes. By spinning a liquid containing target isotopes (e.g., pure chemical or solution), the heavier isotope will be enriched at the outer part of a centrifuge, and the lighter ones will be enriched at the inner part of a centrifuge. The separation capability is positively correlated with rotation speed, outer radius and mass difference between isotopes to separate. This award targets to understand whether liquid centrifugation is effective in separating isotopes important for nuclear fission technologies. The results include the following three sections: 1) Effects of solute concentration on isotope separation; 2) Preliminary progress of building a low-speed countercurrent centrifuge, and 3) Analysis on possible candidates for 7 Li and 37 Cl. The award trained one research scientist, one Ph.D. student, one master student, and one undergraduate on liquid centrifugation and isotope measurements.
07 ISOTOPE AND RADIATION SOURCES↗
Improving Nb 3 Sn cavity performance using centrifugal barrel polishing
Abstract In this study we will show a new method of polishing for Nb 3 Sn cavities known as centrifugal barrel polishing (CBP). Using this method, Nb 3 Sn coated samples are polished to a surface roughness comparable to a traditional Nb cavity after electropolishing. We also investigate different methods of cleaning the Nb 3 Sn surface after CBP to remove residual abrasive particles. The polished Nb 3 Sn surface is analyzed using confocal laser microscopy, and scanning electron microscopy is used to image the surface and measure the surface roughness after polishing. Transmission electron microscopy is also used for high resolution analysis of the surface after polishing. Finally, we show that CBP can improve the performance of a Nb 3 Sn superconducting radiofrequency cavity.
43 PARTICLE ACCELERATORS↗