Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge carrier transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Direct Correlation of Charge Carrier Transport to Local Crystal Quality in Lead Halide Perovskites

Although solution processing methods provide an attractive route toward development of low-cost functional materials, these accessible fabrication approaches can engender high concentrations of microscopic structural defects that are detrimental to performance. In lead halide perovskites, structural disorder derived from solution processing has been implicated as an important determiner of photophysical properties. However, a direct correlation between the functional properties of these materials and the local crystal structure in which non-equilibrium states evolve has remained elusive, in part because structural heterogeneities occur on length scales that defy conventional characterization techniques. To address this knowledge gap, in this work we have combined ultrafast pump–probe microscopy and electron backscattering diffraction to directly correlate charge carrier transport with the local diffraction pattern contrast, an indicator of crystal quality. Spatial correlation of these measurements strongly suggests that even on individual single crystal CsPbBr3 domains, microscopic variability in the crystal quality profoundly impacts the efficiency of charge carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge carrier transport in thin conjugated polymer films: influence of morphology and polymer/substrate interactions

The performance of conjugated polymer (CP)-based electronic devices relies on optimal charge carrier mobilities, which are determined by monomeric architecture, degree of polymerization, chain conformation, and the nano- and mesoscale morphologies. With regard to the latter, we discuss two effects that have received limited attention in the literature, yet important for device performance optimization: (1) the role of morphological disorder and of CP/substrate interactions on the in-plane and out-of-plane carrier transport in CPs; (2) the impact of morphological disorder on charge transfer at the CP/substrate interface. The emergence of film thickness-dependent carrier mobilities, varying over two orders of magnitude within a length scale of 200 nm, and band-bending phenomena, extending tens of nanometers within the CP, are associated with these effects. These findings suggest areas for further research in order to enable widespread applications of next-generation CP-based devices.

36 MATERIALS SCIENCE↗

Benign ferroelastic twin boundaries in halide perovskites for charge carrier transport and recombination

Abstract Grain boundaries have been established to impact charge transport, recombination and thus the power conversion efficiency of metal halide perovskite thin film solar cells. As a special category of grain boundaries, ferroelastic twin boundaries have been recently discovered to exist in both CH 3 NH 3 PbI 3 thin films and single crystals. However, their impact on the carrier transport and recombination in perovskites remains unexplored. Here, using the scanning photocurrent microscopy, we find that twin boundaries have negligible influence on the carrier transport across them. Photoluminescence (PL) imaging and the spatial-resolved PL intensity and lifetime scanning confirm the electronically benign nature of the twin boundaries, in striking contrast to regular grain boundaries which block the carrier transport and behave as the non-radiative recombination centers. Finally, the twin-boundary areas are found still easier to degrade than grain interior.

14 SOLAR ENERGY↗

Impact of dopant-induced band tails on optical spectra, charge carrier transport, and dynamics in single-crystal CdTe

Abstract Cadmium telluride (CdTe) semiconductors are used in thin-film photovoltaics, detectors, and other optoelectronic applications. For all technologies, higher efficiency and sensitivity are achieved with reduced charge carrier recombination. In this study, we use state-of-the-art CdTe single crystals and electro-optical measurements to develop a detailed understanding of recombination rate dependence on excitation and temperature in CdTe. We study recombination and carrier dynamics in high-resistivity (undoped) and arsenic (As)-doped CdTe by employing absorption, the Hall effect, time-resolved photoluminescence, and pump-probe in the 80–600 K temperature range. We report extraordinarily long lifetimes (30 µs) at low temperatures in bulk undoped CdTe. Temperature dependencies of carrier density and mobility reveal ionization of the main acceptors and donors as well as dominant scattering by ionized impurities. We also distinguish different recombination defects. In particular, shallow As Te and deep V Cd −As Cd acceptors were responsible for p-type conductivity. AX donors were responsible for electron capture, while nonradiative recombination centers (V Cd −As Te , As 2 precipitates), and native defects (V Cd −Te Cd ) were found to be dominant in p-type and n-type CdTe, respectively. Bimolecular and surface recombination rate temperature dependencies were also revealed, with bimolecular coefficient T −3/2 temperature dependence and 170 meV effective surface barrier, leading to an increase in surface recombination velocity at high temperatures and excitations. The results of this study allowed us to conclude that enhanced crucible rotation growth of As-doped CdTe is advantageous to As activation, leading to longer lifetimes and larger mobilities and open-circuit voltages due to lower absorption and trapping.

36 MATERIALS SCIENCE↗

Strong Potential Gradients and Electron Confinement in ZnO Nanoparticle Films: Implications for Charge-Carrier Transport and Photocatalysis

We report that zinc oxide (ZnO) nanomaterials are promising components for chemical and biological sensors and photocatalytic conversion and operate as electron collectors in photovoltaic technologies. Many of these applications involve nanostructures in contact with liquids or exposed to ambient atmosphere. Under these conditions, single-crystal ZnO surfaces are known to form narrow electron accumulation layers with few nanometer spatial penetration into the bulk. A key question is to what extent such pronounced surface potential gradients can develop in the nanophases of ZnO, where they would dominate the catalytic activity by modulating charge-carrier mobility and lifetimes. Here, we follow the temperature-dependent surface electronic structure of nanoporous ZnO with photoemission spectroscopy to reveal a sizable, spatially averaged downward band bending for the hydroxylated state and a conservative upper bound of < 6 nm for the spatial extent of the associated potential gradient. This nanoscale confinement of conduction-band electrons to the nanoparticle film surface is crucial for a microscopic understanding and further optimization of charge transport and photocatalytic function in complex ZnO nanomaterials.

36 MATERIALS SCIENCE↗

Charge Carrier Transport in Iron Pyrite Thin Films: Disorder-Induced Variable-Range Hopping

Here, the origin of p-type conductivity and the mechanism responsible for low carrier mobility were investigated in pyrite (FeS 2 ) thin films. Temperature-dependent resistivity measurements (10-400 K) were performed on polycrystalline and nanostructured thin films prepared by three different methods: (1) spray pyrolysis, (2) hot-injection synthesized and spin-coated nanocubes, and (3) pulsed laser deposition. The films have a high hole density (10 18 -10 19 ) cm -3 and low mobility (0.1-4 cm 2 V -1 s -1 ) regardless of the method used for their preparation. The charge transport mechanism is determined to be thermally activated conduction (TAC) at near room temperature, with Mott-type variable-range hopping (VRH) of holes via localized states occurring at lower temperatures. The density functional theory (DFT) predicts that sulfur vacancy induces localized defect states within the band gap and the charge remains localized around the defect. The data indicates that the electronic properties including hopping transport in pyrite thin films can be correlated to sulfur vacancy-related defects. The results provide insights into the electronic properties of pyrite thin films and their implications for charge transport.

36 MATERIALS SCIENCE↗

Tuning counterion chemistry to reduce carrier localization in doped semiconducting carbon nanotube networks

Understanding and controlling the impact that electrostatic interactions have on the transport of injected charge carriers is important for the utilization of pi-conjugated semiconductors in opto-electronic applications. Here, we explore the impact of dopant chemical and electronic structure on the doping efficacy and charge carrier transport in semiconducting single-walled carbon nanotube (s-SWCNT) networks using molecular charge-transfer dopants based on functionalized icosahedral dodecaborane (DDB) clusters. Calculations indicate that localization of electron density on the DDB core reduces the coulombic interactions that contribute to hole localization in the s-SWCNTs, thereby improving charge carrier transport. The enhanced delocalization produces an increase in the electrical conductivity and thermopower at lower charge carrier densities, yielding enhanced thermoelectric transport and a thermoelectric power factor that surpasses the previous best in class for enriched s-SWCNT thin-film networks. This strategy can be applied broadly across pi-conjugated semiconductors to tune and enhance performance in a variety of energy harvesting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Mixed PC 61 BM‐CO i 8DFIC Based Electron Transport Material for Inverted High‐performance Perovskite Solar Cells

Abstract This study reports a blend of [6, 6]‐phenyl‐C61‐butyric acid methyl ester (PC 61 BM) and CO i 8DFIC non‐fullerene acceptor (NFA) as an electron transport layer (ETL) in perovskite solar cells (PSCs). This mixed small‐molecule ETL showed good inter‐molecule mixing, reduced intermolecular distances and decent morphology, resulting in excellent charge carrier transport properties. Morever, charge carrier extraction and transport at the perovskite/ETL interface was optimized by reducing surface traps and defects due to the passivation ability of various terminal groups from the CO i 8DFIC molecule. A high power conversion efficiency (PCE) of 19.12 % was achieved by taking advantage of benefits from both molecules, showing much better performance than the invidual PC 61 BM or CO i 8DFIC (7.13% for using the NFA only). Moreover, the storage and ambient stabilities of the mixed ETL‐based PSCs increased dramatically compared to control devices.

Chemistry↗

Models and Measurements Quantify Photon Recycling, Charge-Carrier Diffusion and Photon Scattering Contributions to Photoluminescence in InP Nanowire Arrays

Nanowire arrays present many unique advantages for solar-to-chemical energy conversion. One possible advantage is that photon recycling between neighboring nanowires has the potential to increase solar energy conversion efficiencies. Here, in this work, we explore three underlying mechanisms of optical and electronic coupling between neighboring nanowires─incident photon scattering, photon recycling, and charge-carrier transport from the photoexcited nanowire to the neighboring nanowire via the underlying substrate─using single nanowire-level microscopy and spectroscopy measurements. We present a comprehensive analysis of light absorption and emission of a single nanowire at open circuit, and subsequent re-absorption and re-emission by a neighboring nanowire. We developed a novel correlated single nanowire microspectroscopy and widefield imaging methodology to spatially resolve photon communication pathways between neighboring nanowires and selectively image re-emitted and reflected photons. We developed unique multiphysics models to couple wave optics and semiconductor photophysics to especially isolate contributions from photon recycling and electronic transport to photon emission from neighboring nanowires. By systematically varying the morphologies of the nanowires modeled, we identified pathways to maximize photon recycling between neighboring nanowires. We concluded that the measured photoluminescence is more strongly influenced by the diffusion of charge carriers as compared to photon recycling in materials with moderate-to-large charge-carrier mobilities (>10 cm 2 V –1 s –1 ), and that photon recycling dictates photoluminescence intensity only when the charge-carrier mobility is low (<1 cm 2 V –1 s –1 ). The experimental and simulation platforms developed herein for photon management strategies can be leveraged by the semiconductor photocatalysis community to enhance solar-to-chemical conversion efficiencies in semiconductor nanowire arrays.

25 ENERGY STORAGE↗

Carrier Diffusion Lengths Exceeding 1 μm Despite Trap-Limited Transport in Halide Double Perovskites

In this work we image charge carrier transport over nanometers–micrometers and picoseconds–microseconds in halide double perovskites Cs 2 AgBiBr 6 and Cs 2 AgTlBr 6 single crystals using stroboscopic scattering microscopy. Both materials exhibit long, microsecond carrier lifetimes because of their indirect or symmetry-forbidden direct bandgaps. We extract free-charge and trap-limited mobilities near the surface and in the crystal bulk. The free-charge mobilities for both materials (~10–50 cm 2 /(V s)) can reach those reported for archetypal lead halide perovskites. We measure trap densities exceeding 10 17 cm –3 within ~20 nm of the crystal surface. Measurements on freshly cleaved or thermally annealed crystals suggest the traps are primarily halide vacancies that likely form through surface bromine degassing. Although these traps considerably slow charge transport, they are energetically shallow, enabling thermally induced detrapping and mobile carriers over microseconds at room temperature. This defect tolerance yields carrier diffusion lengths exceeding 1 μm even in the presence of large trap densities and under solar excitation conditions where traps are not saturated. These results suggest that halide double perovskites could rival the best lead-based perovskites for photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗

An unprecedented quinoid–donor–acceptor strategy to boost the carrier mobilities of semiconducting polymers for organic field-effect transistors

Quinoidal–aromatic conjugated polymers hold great application potential in organic field-effect transistors (OFETs). However, the development of high mobility quinoidal–aromatic conjugated polymers still lags behind the more popular donor–acceptor (D–A) conjugated polymers, mainly owing to the lack of a rational design strategy and efficient building block. Herein, a novel quinoid–donor–acceptor (Q–D–A) strategy is demonstrated to modulate the energy-level and boost the charge carrier transport mobility of conjugated polymers as opposed to the D–A system. On the basis of this strategy, a quinoidal–aromatic conjugated polymer, namely PAQM-BT, is designed and synthesized. With the combined use of quinoid, donor and acceptor units in the backbone, the resulting Q–D–A polymer PAQM-BT displays the narrowest bandgap with the deepest-lying lowest unoccupied molecular orbital (LUMO) energy level, highest backbone coplanarity, enhanced thin-film crystallinity and smallest effective hole mass ($m^*_h$) in comparison with the corresponding D–A polymer PT3B1 and quinoid–donor (Q–D) polymer PAQM-3T. Benefitting from the more effective intra- and inter-chain charge transport, as corroborated by experiment and theoretical calculations, OFET devices based on PAQM-BT exhibit a highly boosted hole mobility of up to 5.10 cm 2 V -1 s -1 , which is one and four orders of magnitude higher than that of PAQM-3T and PT3B1, respectively, and is among the highest for quinoidal–aromatic conjugated polymers. Finally, the potent Q–D–A strategy not only allows the energy level to be modulated but also leads to effective charge carrier transport, opening up possibilities to the development of high mobility quinoidal–aromatic conjugated polymers based on a variety of quinoids, donors, and acceptors.

36 MATERIALS SCIENCE↗

Charge Transfer in 2D Halide Perovskites and 2D/3D Heterostructures

Halide perovskites have emerged as a versatile class of materials, with applications spanning photovoltaics, light-emitting diodes, transistors, and photodetectors. The introduction of semiconducting ligands to form two-dimensional (2D) perovskites on the surface of three-dimensional (3D) perovskites in perovskite solar cells has been shown to enhance the performance and stability. To improve the interface properties between the 3D perovskite layer and charge carrier transport layers, understanding the charge transfer (CT) process in 2D perovskites is crucial. In this Perspective, we address common terminological inaccuracies in energy level descriptions, delineate methods for energy alignment characterization, and present practical instances of CT in 2D perovskite-incorporated solar cells. Furthermore, we emphasize the significance of precise terminology, appropriate measurement techniques, and rational design of 2D ligands to harness the full potential of 2D perovskites in optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resolving the Solvation Structure and Transport Properties of Aqueous Zinc Electrolytes from Salt-in-Water to Water-in-Salt Using Neural Network Potential

Zn Cl 2 solutions are promising electrolytes for aqueous zinc-ion batteries. Here, we report a joint computational and experimental study of the structural and dynamic properties of aqueous Zn Cl 2 electrolytes with concentrations ranging from salt-in-water to water-in-salt (WIS). By developing a neural network potential (NNP) model, we perform molecular dynamics (MD) simulations with accuracy but at much larger lengths and longer timescales. The NNP predicted structures are validated by the structure factors measured by X-ray total scattering experiments. The MD trajectories provide a comprehensive and quantitative picture of the Zn 2 + solvation shell structures. Additionally, we find that the O − H covalent bonds in water are strengthened with increasing salt concentration, thus expanding the electrochemical stability window of aqueous electrolytes. In terms of dynamic properties, the calculated and experimentally measured conductivities are in good agreement. Through the analysis of the calculated cation transference number, we propose a three-stage charge carrier transport mechanism with increasing concentration: independent ion transport, strongly correlated ion transport, and small positive charge carrier diffusion through negatively charged polymeric clusters. Our study provides fundamental atomic scale insights into the structure and transport properties of the Zn Cl 2 electrolyte that can aid the optimization and development of WIS electrolytes. Published by the American Physical Society 2025

25 ENERGY STORAGE↗

Chapter 8: Time-Resolved Photoluminescence Characterization of Polycrystalline Thin-Film Solar Cells

This chapter describes some photoluminescence (PL) approaches to characterize thin film solar cells with emphasis on time-resolved methods. Spectral PL analysis is complementary and was recently reviewed. Since TRPL is not very commonly used in PV characterization, we consider interface and bulk recombination in the test structures and in devices, briefly describe charge-carrier transport and recombination microscopy, and finally, summarize and compare some CdTe, CdSeTe, CIGS, kesterite, and perovskite EO characteristics.

bulk recombination↗

Charge carrier mobility of halide perovskite single crystals for ionizing radiation detection

Halide perovskites have recently emerged as promising semiconductor materials for several applications including solar cells, light-emitting diodes (LEDs), and radiation detectors. The charge carrier transport properties, which could be evaluated by the mobility-lifetime (mu-tau or μ-г) product, serve an important role for the development of halide perovskites for radiation detection applications. In this perspective, we firstly explain the charge transport mechanism and the limiting factors that determine the intrinsic charge carrier mobility in halide perovskite single crystals. Then, we overview the techniques and methods that have been employed for evaluating the charge carrier mobility (for both electrons and holes). Lastly, we discuss the discrepancy between the experimentally determined carrier mobility from the literature for halide perovskite single crystals and a perspective on future developments for carrier mobility enhancement is provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the role of halide mixing in the crystallization kinetics and charge transfer mechanisms of wide-bandgap organic–inorganic halide perovskites

Understanding the crystallization kinetics of Br–I mixed-halide WBG perovskite films, and their correlation to the crystallographic structure and charge transfer dynamics, is critical for advancing WBG perovskite devices. Despite many efforts to increase the photovoltaic performances of wide-bandgap (WBG, with a Br content above 20%) perovskite solar cells based on bromine–iodine (Br–I) mixed-halide perovskites, understanding the crystallization kinetics of WBG perovskite films, as well as the role of Br mixing in the crystallization kinetics, is still lacking. Furthermore, an overlooked aspect is the correlation of the halide compositions, crystallization kinetics, crystallographic structure, and charge transfer dynamics. Here, we unveil that Br–I mixed-halide WBG perovskite films undergo two intrinsically different crystallization kinetic processes. One is the intermediate solvent-complex phase-assisted growth (I-rich), and the other is top-to-bottom downward growth (Br-rich). Such downward growth (including high Br concentrations) correlates with the formation of a highly vertically oriented perovskite film, which is accompanied by defect formation caused by a dissolving and recrystallization process coupled with halide homogenization. Consequently, Br-rich WBG perovskite films exhibit enhanced charge carrier transport, but are concurrently plagued by non-radiative charge recombination. Addressing this fundamental perspective is critical to precisely tailor Br-related crystallization, which significantly affects the structure and optoelectronic properties of WBG perovskite films and devices.

Li, Nian↗