Search NASA⌕ Search

SEARCH · Search NASA

Results for “clear-cutting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Are clear-cut areas estimated from LANDSAT imagery reliable?

The reliability of LANDSAT imagery for estimation of clear-cut areas was evaluated by comparison with data obtained from high-altitude photos and logging historical map and from field inspections. A mature forest was selected as a test site because of its continuous clear-cut operation. The forest is about 50 km northwest of Victoria, British Columbia, Canada, and consists of 9092 ha. Areas clear-cut within the past year were overestimated by 12.9%, those clear-cut 1-year or more by 2.2%, whereas uncut mature timber was underestimated by 3.6%. Three clear-cut areas were missed in the logging map and two in the LANDSAT enhancement. The difference between area estimates was significant when all 26 areas were included but not when 2 overestimated areas were excluded from the analysis. The study indicates that LANDSAT imagery color enhancement is a useful tool in up-dating clear-cut areas for long-term planning in forest management.

Lee, Y. J.↗

ATS-5 solar cell experiment results after one year in synchronous orbit

The results of the ATS-5 solar cell experiment after one year in synchronous orbit are reported. A partial failure in the experimental electronics package has caused a loss of data from half the 80 experimental solar cells. Procedures for extracting data due to a partial spacecraft failure are described and discussed. Data from the remaining 40 solar cells, including 15 mounted on a thin flexible structure are analyzed. Data are corrected to a solar intensity of 140 mW/sq cm and a temperature of 25 C. It was found that after one year in synchronous orbit: (1) cells with 1.52-mm-thick coverslides did not show a clear-cut advantage over those with 0.15-mm coverslides, (2) cells with solderless grid lines are degrading at the same rate as are cells with solder-dipped grid lines, (3) cells not quite completely covered with coverslides suffered a large power loss in comparison to cells fully covered, (4) no clear-cut advantage of 10-cm cells over 2-cm cells has yet been observed, (5) cells mounted on the flexible panel with relatively little backshielding did not degrade any faster than those with substantial backshielding, and (6) the flight data in large part confirms the adequacy of the ground-based techniques used in our preflight radiation test program.

Anspaugh, B. E.↗

ERTS-1 views the Great Lakes

The meteorological content of ERTS images, particularly mesoscale effects of the Great Lakes and air pollution dispersion is summarized. Summertime lake breeze frontal clouds and various winter lake-effect convection patterns and snow squalls are revealed in great detail. A clear-cut spiral vortex over southern Lake Michigan is related to a record early snow storm in the Chicago area. Marked cloud changes induced by orographic and frictional effects on Lake Michigan's lee shore snow squalls are seen. The most important finding, however, is a clear-cut example of alterations in cumulus convection by anthropogenic condensation and/or ice nuclei from northern Indiana steel mills during a snow squall situation. Jet aircraft condensation trails are also found with surprising frequency.

Lyons, W. A.↗

The Dynamics of Solid Propellant Rocket Motors

From the point of view of dynamics, a solid propellant rocket motor is a unique structure in that it is composed of a substantial mass of propellant material case-bonded to a relatively massless, thin-walled cylinder. The mechanical properties of the propellant are such that it contributes little to the stiffness of the composite structure but it does contribute to the dynamic characteristics of the structure because of its mass. Furthermore, due to the viscoelastic character of the propellant, it can be expected to provide considerable damping to the system. At this point in the development of the art of design of solid propellant rocket motors there are no clear-cut or well-founded methods to evaluate quantitatively the contributions of the propellant to the dynamic responses of the composite structure. It is clear that unless such methods are devised, it will be difficult to arrive at accurate missile designs. In this paper a survey of the dynamic problems of solid propellant rocket motors is presented starting from the simplest model thereof and proceeding, step-by-step, to the consideration of more sophisticated and realistic models. The consideration is restricted to infinitesimal deformations of propellant grains with linear mechanical properties. Substantial progress has been achieved towards the solution of many important dynamical problems. We shall attempt to summarize the pertinent developments and indicate along which lines we feel future study should proceed. A few illustrative solutions are included in areas wherein progress has been substantial.

DYNAMIC RESPONSE↗

High voltage transmission microscopy of Surveyor 3 camera shrouds

The internal structure of painted and unpainted aluminum alloy sheet samples from the TV camera shrouds were examined by high-voltage transmission electron microscopy. No clear-cut evidence of radiation damage effects was observed. Noticeable differences in microstructures between the upper visor and the sides and bottom of the lower shroud suggest different thermal histories, and the maximum temperatures due to solar heating are estimated to be between 164 and 319 C. Some correlation between microstructures and maximum estimated temperature is noted. It is felt that the apparent temperature rise due to solar heating will not affect the structural integrity of spacecraft components except possibly for very long periods of exposure. However, substantial thermal diffusion could affect interpretation of solar wind rare gas studies.

Fisher, R. M.↗

Use of implantable telemetry systems for study of cardiovascular phenomena.

Preliminary observations of cardiovascular function have been made in four chimpanzees using multichannel implantable units. Measurements of right- and left-sided pressures were periodically made in these animals over a four-month period, including continuous observations for selected 24-hour periods. Pressures recorded with animals in an awake, unanesthetized, unrestrained state were much lower than pressures reported for restrained animals in similar situations. Diurnal variations of pressure tended to occur, but were not as clear-cut as those reported to occur for humans. The ability to implant a transmitter chronically and receive useful multichannel information in the chimpanzee encourages the future use of such implant devices as part of the control system for an artificial heart or directly for use in man.

Sandler, H.↗

The contributions of Ranger photographs to understanding the geology of the moon

Vidicon photographs returned to earth by Rangers 7, 8, and 9 in 1964 and 1965 were used to study the details of lunar geologic units previously recognized from earth-based telescopic photographs and to make geologic maps at a variety of scales. The photographs from each mission changed continuously in scale as the spacecraft approached impact. The final frames had resolutions some 1,000 times better than the best earthbased photographs. Lunar stratigraphic units mapped at a scale of 1:1,000,000 displayed, at these larger scales, differences in properties and, possibly, in ages, but a clear-cut stratigraphic succession of subunits was not apparent. The plains-forming materials in both terra and mare were divisible into units mainly on the basis of the differences in the total number of superposed craters and in the relative number of craters of various morphologic types.

Trask, N. J.↗

Dual mode nuclear rocket system applications.

Mission areas where the dual-mode nuclear rocket system is superior to nondual-mode systems are demonstrated. It is shown that the dual-mode system is competitive with the nondual-mode system even for those specific missions and particular payload configurations where it does not have a clear-cut advantage.

Boretz, J. E.↗

Lineaments of the Apennine Front - Apollo 15 landing site.

The well-developed systems of lineaments that suggest regional fracturing or layering of the bedrock in the mountains at the Apollo 15 site may be illusions created by oblique lighting rather than expressions of true geologic structure. Supporting evidence includes: (1) occurrence of similar dominant lineament trends on many of the slopes even though the slope orientations differ widely; (2) presence of a thick mantling regolith that should conceal bedrock structures; (3) approximate symmetry of some of the lineament sets about the sun line; (4) lack of clear-cut topographic expression for many of the lineaments; and (5) general similarity of the lunar lineaments to lineament patterns produced by low oblique lighting on model surfaces mantled by fine sifted powder. Locally, as at Silver Spur, some lineament trends are related to distinct topographic features and are more confidently interpreted to reflect underlying geologic structures.

Wolfe, E. W.↗

Cytogenetic studies of the blood (M111), part A

The cytogenetic study of the crew appears to indicate that Skylab-type environmental conditions have no deleterious effect upon chromosomal material. The findings are, however, less clear-cut than might be desired, due in large measure to confounding of the experimental design by the administration of isotope injections for the purposes of other experiments and to the lack of control subjects.

Lockhart, L. H.↗

The comparative evaluation of ERTS-1 imagery for resource inventory in land use planning

The author has identified the following significant results. Multidiscipline team interpretation and mapping of resources for Crook County is nearly complete on 1:250,000 scale enlargements of ERTS-1 imagery. Maps of geology, landforms, soils and vegetation-land use are being interpreted to show limitations, suitabilities and geologic hazards for land use planning. Mapping of lineaments and structures from ERTS-1 imagery has shown a number of features not previously mapped in Oregon. A timber inventory of Ochoco National Forest has been made. Inventory of forest clear-cutting practices has been successfully demonstrated with ERTS-1 color composites. Soil tonal differences in fallow fields shown on ERTS-1 correspond with major soil boundaries in loess-mantled terrain. A digital classification system used for discriminating natural vegetation and geologic materials classes has been successful in separation of most major classes around Newberry Cauldera, Mt. Washington and Big Summit Prairie. Computer routines are available for correction of scanner data variations; and for matching scales and coordinates between digital and photographic imagery. Methods of Diazo film color printing of computer classifications and elevation-slope perspective plots with computer are being developed.

Simonson, G. H.↗

Dynamics of suspended sediment plumes in Lake Ontario

The author has identified the following significant results. Imagery obtained on 25 January 1974, shows a well-defined plume at the mouth of the Niagara River and a much smaller but intense plume emanating from Port Dalhousie Harbor, Ontario. Additionally, a plume can be seen trailing eastward from the outer end of the Welland Canal. This is the first time that a clear-cut winter view of these plumes was detected by the ERTS-1 satellite outside the navigation season. Since the Welland Canal was not in operation, it is likely that the plume, visible along the canal's outer jetty on frames 1551-15313-4-5, was the result of westward moving turbid water emanating from Port Dalhousie Harbor to the west.

Pluhowski, E. J.↗

SO2 damage to forests recorded by ERTS-1

Sulfur dioxide fumes have been affecting the forests around Wawa, Ontario, which have been under surveillance for a number of years and were recently covered by ultra-small-scale (1:160,000) air photography for damage-assessment purposes. Image interpretation supported by electronic color enhancement was used to delineate on ERTS imagery three damage zones (total-kill, heavy-kill and medium-damage zones). The zones delineated on ERTS imagery are similar to the results of aerial sketch-mapping and air photo interpretation. Band 5 provided the greatest detail for assessing the damage to the forests, followed in successive order by bands 4, 6 and 7. Comparison with ERTS images obtained in the winter showed that even though the total-kill could be separated from heavy-kill damage zones, total-kill could not be consistently separated from clear-cut logging, burned areas, frozen lakes and bogs.

Murtha, P. A.↗

A 30-day forecast experiment with the GISS model and updated sea surface temperatures

The GISS model was used to compute two parallel global 30-day forecasts for the month January 1974. In one forecast, climatological January sea surface temperatures were used, while in the other observed sea temperatures were inserted and updated daily. A comparison of the two forecasts indicated no clear-cut beneficial effect of daily updating of sea surface temperatures. Despite the rapid decay of daily predictability, the model produced a 30-day mean forecast for January 1974 that was generally superior to persistence and climatology when evaluated over either the globe or the Northern Hemisphere, but not over smaller regions.

Spar, J.↗

The comparative evaluation of ERTS-1 imagery for resource inventory in land use planning

The author has identified the following significant results. Multidiscipline team interpretation and mapping of resources for Crook County is complete on 1:250,000 scale enlargements of ERTS imagery and 1:120,000 hi-flight photography. Maps of geology, soils, vegetation-land use and land resources units were interpreted to show limitations, suitabilities, and geologic hazards for land use planning. Mapping of lineaments and structures from ERTS imagery has shown a number of features not previously mapped in Oregon. A multistage timber inventory of Ochoco National Forest was made, using ERTS images as the first stage. Inventory of forest clear-cutting practices was successfully demonstrated with color composites. Soil tonal differences in fallow fields correspond with major soil boundaries in loess-mantled terrain. A digital classification system used for discriminating natural vegetation and geologic material classes was successful in separating most major classes around Newberry Caldera, Mt. Washington, and Big Summit Prairie.

Schrumpf, B. J.↗

Geologic setting of Boulder 1, Station 2, Apollo 17 landing site

Boulder 1 at Station 2 is one of three boulders sampled by Apollo 17 at the base of the South Massif, which rises 2.3 km above the floor of a linear valley interpreted as a graben formed by deformation related to the southern Serenitatis impact. The boulders probably rolled from the upper part of the massif after emplacement of the light mantle. The massif exposures are suggested to represent the upper part of thick ejecta deposited by the southern Serenitatis impact near the rim of the transient cavity. The ring structure of the southern Serenitatis basin and the radial grabens that give the massifs definition were imposed on this ejecta at a slightly later stage in the basin-forming process. There is no clear-cut compositional, textural, or photogeological evidence that Imbrium ejecta was collected at the Apollo 17 site.

Wolfe, E. W.↗

Gamma-ray emission and nucleosynthesis of lithium by young pulsars

It is proposed that Li-7 is produced in the Galaxy primarily by alpha-alpha collisions surrounding newly born pulsars. About 10 percent of the pulsar energy losses are converted to medium-energy alpha-particles which collide in a dominantly He nebula. The problem of the origin of lithium would be solved by the scenario, and clear-cut tests by nuclear gamma-ray astronomy are described.

Clayton, D. D.↗