Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Statistical Relations among Solid Precipitation, Atmospheric Moisture and Cloud Parameters in the Arctic

Observations collected during cold-season precipitation periods at Utquagvik, Alaska and at the multidisciplinary drifting observatory for the study of Arctic climate (MOSAiC) are used to statistically analyze the relations among the atmospheric water cycle parameters including the columnar supercooled liquid and ice amounts (expressed as liquid-water and ice-water paths, i.e., LWP and IWP), the integrated water vapor (IWV) and the near-surface snowfall rate. Data come from radar and radiometer-based retrievals and from optical precipitation sensors. While the correlation between snowfall rate and LWP is rather weak, correlation coefficients between radar-derived snowfall rate and IWP are high (~0.8), which is explained, in part, by the generally low LWP/IWP ratios during significant precipitation. Correlation coefficients between snowfall rate and IWV are moderate (~0.45). Correlations are generally weaker if snowfall is estimated by optical sensors, which is, in part, due to blowing snow. Correlation coefficients between near-surface temperature and snowfall rates are low (r < 0.3). The results from the Alaska and MOSAiC sites are generally similar. These results are not very sensitive to the amount of time averaging (e.g., 15 min averaging versus daily averages). Observationally based relations among the water cycle parameters are informative about atmospheric moisture conversion processes and can be used for model evaluations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The influence of the cloud virial parameter on the initial mass function

ABSTRACT Crucial for star formation is the interplay between gravity and turbulence. The observed cloud virial parameter, $\alpha _{\mathrm{vir}}$, which is the ratio of twice the turbulent kinetic energy to the gravitational energy, is found to vary significantly in different environments, where the scatter among individual star-forming clouds can exceed an order of magnitude. Therefore, a strong dependence of the initial mass function (IMF) on $\alpha _{\mathrm{vir}}$ may challenge the notion of a universal IMF. To determine the role of $\alpha _{\mathrm{vir}}$ on the IMF, we compare the star-particle mass functions obtained in high-resolution magnetohydrodynamical simulations including jet and heating feedback, with $\alpha _{\mathrm{vir}}=0.0625$, 0.125, and 0.5. We find that varying $\alpha _{\mathrm{vir}}$ from $\alpha _{\mathrm{vir}}\sim 0.5$ to $\alpha _{\mathrm{vir}}< 0.1$ shifts the peak of the IMF to lower masses by a factor of $\sim 2$ and increases the star formation rate by a similar factor. The dependence of the IMF and star formation rate on $\alpha _{\mathrm{vir}}$ is non-linear, with the dependence subsiding at $\alpha _{\mathrm{vir}}< 0.1$. Our study shows a systematic dependence of the IMF on $\alpha _{\mathrm{vir}}$. Yet, it may not be measurable easily in observations, considering the uncertainties, and the relatively weak dependence found in this study.

Mathew, Sajay Sunny (ORCID:0000000283818195)↗
DOE OSTI2020

A new classification of satellite-derived liquid water cloud regimes at cloud scale

Clouds are highly variable in time and space, affecting climate sensitivity and climate change. To study and distinguish the different influences of clouds on the climate system, it is useful to separate clouds into individual cloud regimes. In this work we present a new cloud classification for liquid water clouds at cloud scale defined using cloud parameters retrieved from combined satellite measurements from CloudSat and CALIPSO. The idea is that cloud heterogeneity is a measure that allows us to distinguish cumuliform and stratiform clouds, and cloud-base height is a measure to distinguish cloud altitude. The approach makes use of a newly developed cloud-base height retrieval. Using three cloud-base height intervals and two intervals of cloud-top variability as an inhomogeneity parameter provides six new liquid cloud classes. The results show a smooth transition between marine and continental clouds as well as between stratiform and cumuliform clouds in different latitudes at the high spatial resolution of about 20 km. Analysing the micro- and macrophysical cloud parameters from collocated combined MODIS, CloudSat and CALIPSO retrievals shows distinct characteristics for each cloud regime that are in agreement with expectation and literature. This demonstrates the usefulness of the classification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Perturbing Parameters to Understand Cloud Contributions to Climate Change

Abstract The sensitivity of cloud feedbacks to atmospheric model parameters is evaluated using a CAM6 perturbed parameter ensemble (PPE). The CAM6 PPE perturbs 45 parameters across 262 simulations, 206 of which are used here. The spread in the total cloud feedback and its six components across the CAM6 PPE are comparable to the spread across the CMIP6 and AMIP ensembles, indicating that parametric uncertainty mirrors structural uncertainty. However, the high-cloud altitude feedback is generally larger in the CAM6 PPE than WCRP assessment, CMIP6, and AMIP values. We evaluate the influence of each of the 45 parameters on the total cloud feedback and each of the six cloud feedback components. We also explore whether the CAM6 PPE can be used to constrain the total cloud feedback, with inconclusive results. Further, we find that despite the large parametric sensitivity of cloud feedbacks in CAM6, a substantial increase in cloud feedbacks from CAM5 to CAM6 is not a result of changes in parameter values. Notably, the CAM6 PPE is run with a more recent version of CAM6 (CAM6.3) than was used for AMIP (CAM6.0) and has a smaller total cloud feedback (0.56 W m −2 K −1 ) as compared to CAM6.0 (0.81 W m −2 K −1 ) owing primarily to reductions in low clouds over the tropics and midlatitudes. The work highlights the large sensitivity of cloud feedbacks to both parameter values and structural details in CAM6.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

High-contrast Thermal Infrared Spectroscopy with ALES: The 3–4 μm Spectrum of κ Andromedae b

We present the first L-band (2.8–4.1 μm) spectroscopy of κ Andromedae b, a ~20 M Jup companion orbiting at 1" projected separation from its B9-type stellar host. We combine our Large Binocular Telescope (LBT) Arizona Lenslets for Exoplanet Spectroscopy (ALES) integral field spectrograph data with measurements from other instruments to analyze the atmosphere and physical characteristics of κ And b. We report a discrepancy of ~20% (2σ) in the L' flux of κ And b when comparing to previously published values. We add an additional L' constraint using an unpublished imaging data set collected in 2013 using the LBT Interferometer/LMIRCam, the instrument in which the ALES module has been built. The LMIRCam measurement is consistent with the ALES measurement, both suggesting a fainter L-band scaling than previous studies. The data, assuming the flux scaling measured by ALES and LMIRCam imaging, are well fit by an L3-type brown dwarf. Atmospheric model fits to measurements spanning 0.9–4.8 μm reveal some tension with the predictions of evolutionary models, but the proper choice of cloud parameters can provide some relief. In particular, models with clouds extending to very low pressures composed of grains ≤1 μm appear to be necessary. If the brighter L' photometry is accurate, there is a hint that subsolar metallicity may be required.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

An Improved Algorithm for Estimating Surface Shortwave Radiation: Preliminary Evaluation With MODIS Products

Cloud parameters, as key inputs in radiative transfer algorithms, have a critical impact on surface shortwave radiation (SSR) computation. By introducing a parameterization of cloud transmittance and reflectance, based on radiative transfer simulations, this study improves the accuracy of an existing physically based model which severely underestimates SSR under thick cloud conditions. The cloud parameterization adopts the single-layer cloud model and simulates cloud transmittances and reflectances by varying cloud optical thickness, cloud particle size, and solar zenith angle. The revised model is applied to estimate instantaneous SSR using Moderate-resolution Imaging Spectroradiometer (MODIS) atmospheric and land products. The retrieved SSR is evaluated against observation data from 41 Baseline Surface Radiation Network (BSRN) stations and is also compared with the MODIS official SSR product. The root mean square error (RMSE) of the estimated instantaneous radiation is approximately 52 and 98 W m -2 under clear-sky and all-sky conditions, respectively. The accuracy of the improved parameterization is higher than that of the original model, and there is no obvious underestimation of SSR in the case of high cloud optical thickness. Therefore, the new algorithm improves the accuracy of SSR estimates in the presence of thick clouds. Retrievals with the improved model also achieve higher accuracy than the MODIS official SSR product (MCD18A1). To conclude, the reliable performance of the scheme at most BSRN stations illustrates that the improved model can be used to map SSR on a global scale.

42 ENGINEERING↗
DOE OSTI2025

Developing A Custom-Built Metal Aerosol Processing Chamber: Analysis of Aerosol Coagulation at Low Humidities

We have developed an intermediate size (906 L) aerosol processing chamber, and this work reports on the design and initial characterization of dry aerosol experiments. Specifically, we are determining wall-loss and coagulation correction factors using the observed size distribution measurements for surrogates of common aerosol classes: sodium chloride, sucrose, and biomass burning aerosol smoke. Results show that, on average, sodium chloride, sucrose, and smoke wall-loss rates converge to similar values on relatively short time scales (< 1 h). The fitted coagulation correction factor, W C -1 , for smoke particles (1.23 ± 0.312), indicates that on average they adhere to each other more than sodium chloride (0.969 ± 0.524) and sucrose (1.16 ± 1.38). The relative uncertainty is high for the coagulation correction, but it is consistent with our Monte Carlo error analysis. This study lays the foundation for future experiments at elevated humidity and supersaturation conditions to characterize the influence of particle shape on coagulation and cloud parameters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

sondeparam

The SondeParam VAP will calculate useful radiosonde convective cloud parameters including the convective available potential energy (CAPE), convective inhibition (CIN), LCL, LFC, LNB, and other parameters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The turbulence driving parameter of molecular clouds in disc galaxies

ABSTRACT Supersonic turbulence plays a pivotal role during the formation of molecular clouds and stars in galaxies. However, little is known about how the fraction of compressive and solenoidal modes in the velocity field evolves over time and how it depends on properties of the molecular cloud or the galactic environment. In this work, we carry out magnetohydrodynamical simulations of disc galaxies and study the time evolution of the turbulence driving parameter for an ensemble of clouds. We find that the time-averaged turbulence driving parameter is insensitive to the position of the cloud within the galaxy. The ensemble-averaged driving parameter is found to be rather compressive with b ∼ 0.5–0.7, indicating almost time-independent global star formation properties. However, each individual cloud shows a highly fluctuating driving parameter, which would strongly affect the cloud’s star formation rate. We find that the mode of turbulence driving can rapidly change within only a few Myr, both from solenoidal to compressive and vice versa. We attribute these changes to cloud collisions and to tidal interactions with clouds or overdensities in the environment. Last, we find no significant differences in the average driving parameter between hydrodynamic and initially strongly magnetized galaxies. However, the magnetic field tends to reduce the overall fluctuation of the driving parameter. The average driving and its uncertainty are seen to be in agreement with recent constraints on the turbulence driving mode for solar neighbourhood clouds.

Körtgen, Bastian↗
DOE OSTI2023

Evaluation of Historic Nuclear Cloud Measurement for Entrainment Parameter Determination

We evaluated the uncertainties associated with the entrainment parameters computed from nuclear cloud measurements taken during historic weapon testing campaigns. This evaluation found that variations in the way cloud heights and diameters were defined during the analysis of film records result in very large uncertainties in the entrainment parameters, severely limiting the utility of these data. For the measurements of atmospheric conditions at the time of the tests, the main sources of error are associated with the differences in the location and timing of the soundings.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2026

Prognostic simulations of mixed-phase clouds with model AC-1D v1.0: the impact of aerosol types and freezing parameterizations on ice crystal budgets

Mixed-phase clouds at high latitudes contribute to the uncertainty in predicting cloud feedbacks and climate sensitivity, mainly due to the complexity of microphysical processes that influence the partitioning between the supercooled liquid and ice phases, and hence, cloud radiative effects on regional scales. Particularly in Arctic mixed-phase clouds, the activation of ice-nucleating particles (INPs) from various aerosol populations remains a leading source of uncertainty. We developed an aerosol-cloud one-dimensional (AC-1D) model, which provides a novel framework to prognostically treat INP and ice crystal budgets while explicitly accounting for polydisperse and multicomponent aerosol that activate INPs following different freezing parameterizations. The AC-1D model is informed by large-eddy simulations to probe the impact of INP representation on predicted ice crystal number concentrations (N i ) and ice crystal budgets in mixed-phase Arctic stratus. We apply three immersion freezing (IMF) parameterizations, two time-independent (singular) and one time-dependent (classical nucleation theory), to predict the evolution of the INP reservoir and resulting ice crystal budget from polydisperse mineral dust, organic (humic-like substances), and sea spray aerosol particle size distributions. Our analysis focuses on how variations in aerosol number concentration and cloud system parameters such as cloud cooling rate, cloud-top entrainment rate, and ice crystal fall speed influence the INP reservoir and ice crystal budgets. Furthermore, this study investigates the competitive ice nucleation dynamics in mixed aerosol environments and provides a process-level quantification of the INP budget terms, which directly controls ice crystal budgets. For all studied case scenarios, the aerosol types and associated particle size distributions significantly impact INP and N i , and the choice between a time-dependent and a singular freezing description yields orders-of-magnitude differences in the predicted INP and N i over the 10 h simulation time, reflecting typical cloud lifetimes. Our results show that the influence of cloud cooling, INP entrainment, and sedimentation varies significantly depending on the chosen freezing parameterization. These findings underscore the critical need for robust IMF parameterizations and precise cloud system observations to enhance the accuracy of models in predicting mixed-phase cloud structure and evolution.

Arctic clouds↗
DOE OSTI2025

Uncertainty quantification and optimization of precipitating hydrometeor parameters for winter precipitation in a cloud microphysics scheme

The precipitating hydrometeor parameters used in cloud microphysics schemes carry inherent uncertainties. The quantification of these uncertainties, together with parameter optimization, can significantly improve precipitation forecasts. This study investigates the effects of 13 parameters in the Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) microphysics scheme, which define the hydrometeor characteristics such as fall velocity–diameter and mass–diameter relationships, as well as the shape parameter of the drop size distribution for precipitating particles such as rain, snow, and graupel on simulated winter precipitation. A comparison between the model's pre-defined parameters and observations from the International Collaborative Experiments for the PyeongChang 2018 Olympic and Paralympic winter games (ICE-POP 2018) field campaign reveals that the fall velocity–diameter relationship for rain, the mass–diameter relationships for snow and graupel, and the shape parameters for all precipitating particles in the WDM6 scheme deviate from the median values observed by the two-dimensional video disdrometer (2DVD). To quantify parameter sensitivities, a perturbed parameter ensemble (PPE) of 256 simulations was conducted within parameter ranges constrained by 2DVD observations for three winter precipitation cases. Bayesian optimization was then applied to identify parameter sets that minimized the root mean square error (RMSE) for each case, achieving reductions of up to 30.2 %. These results demonstrate that ensemble-based uncertainty quantification and parameter optimization can help identify key parameters and provide a pathway to improving precipitation simulation performance. In addition, measurement sites can be strategically selected based on regions that show high sensitivity to variations in hydrometeor characteristic parameters.

Bayesian optimization↗
DOE OSTI2023

Convective and Turbulent Motions in Nonprecipitating Cu. Part III: Characteristics of Turbulence Motions

Velocity field in a nonprecipitating Cu under BOMEX conditions, simulated by SAM with 10-m resolution and spectral bin microphysics is separated into the convective part and the turbulent part, using a wavelet filtering. In Part II of the study properties of convective motions of this Cu were investigated. Here in Part III of the study, the parameters of cloud turbulence are calculated in the cloud updraft zone at different stages of cloud development. The main points of this study are (i) application of a fine-scale LES model of a single convective cloud allowed a direct estimation of turbulence parameters using the resolved flow in the cloud and (ii) the separation of the resolved flow into the turbulence flow and the nonturbulence flow allowed us to estimate different turbulent parameters with sufficient statistical accuracy. We calculated height and time dependences of the main turbulent parameters such as turbulence kinetic energy (TKE), spectra of TKE, dissipation rate, and the turbulent coefficient. It was found that the main source of turbulence in the cloud is buoyancy whose contribution is described by the buoyancy production term (BPT). The shear production term (SPT) increases with height and reaches its maximum near cloud top, and so does BPT. In agreement with the behavior of BPT and SPT, turbulence in the lower cloud part (below the inversion level) is weak and hardly affects the processes of mixing and entrainment. The fact that BPT is larger than SPT determines many properties of cloud turbulence. For instance, the turbulence is nonisotropic, so the vertical component of TKE is substantially larger than the horizontal components. Another consequence of the fact that BPT is larger than STP manifests itself in the finding that the turbulence spectrum largely obeys the -11/5 Bolgiano–Obukhov scaling. The classical Kolmogorov -5/3 scaling dominates for the low part of a cloud largely at the dissolving stage of cloud evolution. Using the spectra obtained we evaluated an “effective” dissipation rate which increases with height from nearly zero at cloud base up to 20 cm 2 s -3 near cloud top. The coefficient of turbulent diffusion was found to increase with height and ranged from 5 m 2 s -1 near cloud base to 25 m 2 s -1 near cloud top. In conclusion, the possible role of turbulence in the process of lateral entrainment and mixing is discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The influence of multiple groups of biological ice nucleating particles on microphysical properties of mixed-phase clouds observed during MC3E

Abstract. A new empirical parameterization (EP) for multiple groups of primary biological aerosol particles (PBAPs) is implemented in the aerosol–cloud model (AC) to investigate their roles as ice nucleating particles (INPs). The EP describes the heterogeneous ice nucleation by (1) fungal spores, (2) bacteria, (3) pollen, (4) detritus of plants, animals, and viruses, and (5) algae. Each group includes fragments from the originally emitted particles. A high-resolution simulation of a midlatitude mesoscale squall line by AC is validated against airborne and ground observations. Sensitivity tests are carried out by varying the initial vertical profiles of the loadings of individual PBAP groups. The resulting changes in warm and ice cloud microphysical parameters are investigated. The changes in warm microphysical parameters, including liquid water content and cloud droplet number concentration, are minimal (<10 %). Overall, PBAPs have little effect on the ice number concentration (<6 %) in the convective region. In the stratiform region, increasing the initial PBAP loadings by a factor of 1000 resulted in less than 40 % change in ice number concentrations. The total ice concentration is mostly controlled by various mechanisms of secondary ice production (SIP). However, when SIP is intentionally shut down in sensitivity tests, increasing the PBAP loading by a factor of 100 has an effect of less than 3 % on the ice phase. Further sensitivity tests revealed that PBAPs have little effect on surface precipitation and on the shortwave and longwave flux (<4 %) for a 100-fold perturbation in PBAPs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Calibration of cloud and aerosol related parameters for solar irradiance forecasts in WRF-solar

Model parameters are a major source of uncertainty in numerical weather prediction. Recently, the Weather Research and Forecasting model with Solar extensions (WRF-Solar) has been upgraded by enhancing the treatment of sub-grid scale cloud and aerosols with augmentations of a sub-grid scale cloud scheme (CLD3) and an upgraded aerosol-aware Thompson-Eidhammer scheme (TE14). However, the value of model parameters associated with these parameterizations are assigned based on limited measurements or theoretical calculations. Calibrating the most sensitive parameters has the potential to improve solar irradiance predictions. Here, we adopted a multiobjective surrogate-based optimization (SBO) framework to calibrate nine parameters used in CLD3 and TE14 that lead to the largest sensitivity in simulated irradiance. The normalized mean-absolute-error (NMAE) of global horizontal irradiance (GHI) and direct normal irradiance (DNI) are minimized by calibrating WRF-Solar over two regions including the Southern Great Plains (SGP) and Central California, in order to focus on parameter calibration under cloudy conditions with different aerosol loading. The results show that generalized linear model (GLM)-based surrogate models approximate physical models well, particularly when the third order and three-way interaction terms are considered. The SBO framework efficiently searches the parameter space for optimal solutions with less computational costs than directly calibrating the physical model. We first calibrate CLD3 parameters over the less-polluted SGP region. Optimized CLD3 parameters alone result in NMAE reduction by 14% for the site-mean and up to 33% for individual cases over the SGP region. With further calibration of TE14 parameters over the Central California during active fire periods, the optimized parameters lead to over 20% reductions of NMAE. Our investigation reveals, however, that optimizing TE14 has a limited impact on irradiance simulations under less-polluted conditions in the SGP.

14 SOLAR ENERGY↗
DOE OSTI2026

Overview of the Nephele Perturbed Parameter Ensemble for Aerosol‐Cloud Interactions in E3SMv3

Aerosol-cloud interactions (aci) are the leading source of uncertainty in inferring climate sensitivity from the historical record. Earth system models (ESMs) struggle to represent aci because the processes responsible for these phenomena occur at much finer time and space scales than can be resolved by any ESM. Observational constraints provide key benchmarks to test ESMs, but cannot be used alone to fully understand aci processes except in very specific cases where causality is controlled; some degree of modeling is required to infer aci and estimate radiative forcing. Here, we generate and characterize a perturbed parameter ensemble (PPE) in version 3 of the Energy Exascale ESM (E3SMv3). We perturb 25 parameters that govern aci processes over 250 members and integrate the model over present-day and preindustrial aerosol emissions. We find that the process representation in E3SMv3 is flexible and can generate global-mean effective radiative forcings due to aci (ERFaci) ranging from −3.0 to +0.9 W m −2 . The positive ERFaci values simulated by a portion of the PPE are implausible and result from parameter combinations that produce unrealistic top-of-atmosphere energy fluxes. While global-mean cloud droplet number concentration always increases in response to anthropogenic aerosol, cloud liquid water path can both increase and decrease, suggesting that precipitation suppression is not the only aerosol-cloud adjustment represented by E3SMv3. Analysis of which processes control liquid cloud adjustment in the PPE points toward stratiform precipitation processes and aerosol activation, which is consistent with many previous ESMs, as well as the new two-moment convective cloud microphysics in E3SMv3.

Nugent, Jacqueline M. [Univ. of Wyoming, Laramie, ↗
DOE OSTI2025

Constraining aerosol–cloud adjustments by uniting surface observations with a perturbed parameter ensemble

Abstract. Aerosol–cloud interactions (ACIs) are the largest source of uncertainty in inferring the magnitude of future warming consistent with the observational record. The effective radiative forcing due to ACI (ERFaci) is dominated by liquid clouds and is composed of two terms: the change in cloud albedo due to redistributing liquid over a larger number of cloud droplets (Nd) and the change in cloud macrophysical properties due to changes in cloud microphysics. These terms are, respectively, referred to as the radiative forcing due to ACI (RFaci) and aerosol–cloud adjustments. While the magnitude of RFaci is uncertain, its sign is confidently negative and results in a cooling in the historical record. In contrast, the adjustment of cloud liquid water path (LWP) to enhanced Nd and associated radiative forcing is uncertain in sign. Increased LWP in response to increased Nd is consistent with precipitation suppression, while decreased LWP in response to increased Nd is consistent with enhanced evaporation from cloud top. Observational constraints of these processes are poor in part because of causal ambiguity in the relationship between Nd and LWP. To better understand this relationship, precipitation (P), Nd, and LWP surface observations from the Eastern North Atlantic (ENA) atmospheric observatory are combined with the output from a perturbed parameter ensemble (PPE) hosted in the Community Atmosphere Model version 6 (CAM6). This allows for causal interpretation of observed covariability. Observations of precipitation and cloud from ENA constrain the range of possible LWP aerosol–cloud adjustments relative to the prior from the PPE by 15 %, resulting in a global value that is confidently positive (a historical cooling) ranging from 2.1 to 6.9 g m−2. It is found that observed covariability between Nd and LWP is dominated by coalescence scavenging and that this observed covariability is not strongly related to aerosol–cloud adjustments.

54 ENVIRONMENTAL SCIENCES↗